Approver again receiving workitem in inbox

Hi All,
I have implemented legal contract workflow, based change ststus(RA ) workflow should be triggered. for that i have given a condition.my workflow is 2 level approval workflow. 1st level approved then status to be changed to a1,if he rejected status changed to q1. it is working fine. but when ever approver1 rejects , status got changed to q1 , again approver1 receiving another workitem for approve.
could you please suggest me, how to stop again that one.
my BO is draw based on Condition documnet type(vcd) and documnet status(RA)then only my workflow triggers and went approvers inbox,here i have used Rule with responsibilities.based on the circle i am getting the approver1.
Thanks and Regards,
Siva

Hi Swaminathan,
Thanks for your reply..
Once rejected container showing user WF-Batch again triggerring workflow.
How to stop this.
After rejection happens status got changed.(for that i have used method setstatus) , if i check approver inbox again another workitem with changed status.
as per the requirement if approver1 rejects status to be changed to q1 and send mail to workflow initiator workflow ends.
this is happening, but after rejecting approver1 again receiving another workitem for approve.(i.e US WF-batch generating)
in approver1 inbox.
please help me how to resolve this?
Regards,
Siva

Similar Messages

SC doesn't go back to approver again after changed by requester

Hello Experts,
We are implementing SRM 5.5 with N step Item base approval (WS14500015) process for SC.
SC created by requester goes to approver for approval. Approver Changes the price in SC & Approves SC. This SC comes back to Requester again. Requester goes into his inbox, change SC price back to origional & Save again.
Now Ideally SC should go back to approval again however in our case SC is getting approved straight a way & PO is getting created in SRM ( Ex-classic Scenario)
Wondering why SC doesn't goe back to approver again for approval?
Any help is highly appreciated..
Thnaks & regards,
Chris

Did you check the security settings of the creator.
There are 4 options, depending on that the workflow is restarted or just continues if the user changes the cart.
SU01 - personalization tab--> BBP_WFL_SECURITY - check all the options high, medium,low, new.
Regards,
PR.

Urgent - An invoice which has been paid, route for approval again

Hi All,
Below is the what I am stuggling to sort.
Scenario - The invoice 6200382/1 was processed on 6 March 2009. It was approved on 23 March 2009 by Mr. DAVE F VENTURA and Mr. BENOIT M VERHAEGHE. The invoice was paid on 27 March 2009.It appears that the invoice has now again routed for approval, and was rejected on 17 April by Mr. DAVE F VENTURA. The rejection notification (attached) which Norma received, indicates that the invoice was rejected on 15 April 2009. How can an invoice which has been paid, route for approval again, and why is there a difference in the rejected dates as indicated on the approval history and the notification?
This has happened for the second time. I am unable to give a solution to this problem. Need help urgently.
Thanks,
--Sonia

Hi Sonia,
I am facing the similar issue just that the invoice was not rejected.It was paid and re-routed for approval.
Could you please let me know how you resolve this issue.

Workflow - Change description "Cancel and keep workitem in inbox"

Hi,
Can you please tell me whether we have a way to change the description of "Cancel and keep workitem in inbox" as "Cancel".
Thanks
Ashu

Hi Ashu,
The text is coming from the Text symbol of standard include program LSWU2F10.
Text symbol number is 301.
Check for enhansement option to change the text symbol.
But this change will affect all your decision step workflow's.
Thanks,
Viji.

Cancel and Keep Workitem in Inbox

Hi,
My Workflow Step calls a Cutom Transaction which should have a button Cancel and keep Workitem in Inbox.How do i go abaout implementing this.
It should work similar to the User Decision cancel and keep work item .
My Step also has a Confirm End of processing Check.So if i click on the Cancel
the work item the screen confirm end of processin step should not appear and workitem should be in my Inbox

Hello,
Just call EXIT_CANCELLED. in your method. This cancels a WI without completing it and leaves it in the inbox.
<code to call screen/transaction>
if <your button was clicked>
exit_cancelled.
endif.
Cheers,
Mike
Message was edited by:
Mike Pokraka
Correction, brain on holiday, it's exit_cancelled not exit_return.

PR Release Workitem in inbox

Hi Friends,
I have worked on standard BO.
PR release workflow as purchaseofficer got the mail and pr release-please register workitem..that's fine.
But purofcr should be click on workitem. he is not saved. then purofcr back to inbox. but workitem is not inbox. it's go to outbox.
now client requirement workitem is not saved still in inbox after saved then go to outbox.
Plz need your's help.

Hi,
i know difference in mail & workitem. and check also outbox.
my Workflow purchase officer got mail and workitem both.he is click on workitem. then he is not check the confirm button. he is back to inbox.
not before confirm check box disappear on workitem in inbox.. then after check the check the disapper in workitem.
Regards
MSR

When approving a PO through SRM inbox, the 'Back to Approval' link ismissin

When approving a PO through SRM inbox, the 'Back to Approval' link ismissing

The issue that you have reported is not a bug, but a strandard. Once the
application is integrated to the Portal, the navigation between screens/
transaction is handled differently and should not be compared to ITS.
In EP, you will have to use the Portal's 'Back' button to navigate back.
Please refer to note # 933450 as the correction is the same for this
issue also.
The link has been removed because navigation in EP is handled
differently as compared to ITS. In EP you use the EP's navigation and
not ITS links like ('Back to Sourcing') or ('Return to Change Version')

Total number of mails received in an inbox for a day/time

Hi,
Please let me know on how to get the total number of mails received in an inbox for a particular day/time . As per the requirements, i need to track the no of mails received on daily basis. Kindly guide me on how to
proceed on this .Thank you.

Exchange profile analyzer would work fine here. And technet blog team providing this option at here :
http://blogs.technet.com/b/samdrey/archive/2013/07/17/exchange-2007-2010-2013-gather-email-statistics-like-exchange-profile-analyzer-used-to-give-in-the-past-but-now-using-powershell.aspx
Or,
http://blogs.technet.com/b/neiljohn/archive/2011/08/09/user-profile-analysis-for-exchange-server-2010.aspx
If you looks more option for tracking, analyzing and monitoring user mailboxes including mailbox folders and attachment sizes, you can have check this resource available at
here . It could also be a good approach for you.

My podcast feed need to be approved again.

My podcast feed need to be approved again.
Hi. I presented my podcast feed and rejected.
I found a problem and fixed it.
If I want to represent my feed, what should I do?
http://feeds.feedburner.com/OhSunnyTrack

Contact iTunes customer support.

Approver level 2 not receiving Workitem

Dear Forum contributors,
May I kindly ask you advice about the next situation?
     We have set up a WF process with 3 levels based on the SC amount.
     Requesters are able to change approvers determined by the system according to a custom criteria.
     The conflictive case goes as it follows:
o     Requester creates a SC. Three levels of approval are determined.
o     Requester changes approver level 1determined for another approver of the same level.
o     Requester changes approver level 2 determined for another approver of the same level.
o     SC is ordered.
o     Workitem goes into the approver level 1 inbox. Approver level 1 completes workitem.
o     Workitem goes into the approver level 2 inbox.
o     Approver level 2 is out of office for a long period, therefore requester enters into the SC and changes the approver level 2 for another one with the same level.
o     Work item is not going into the new approver level 2 inbox. Woritem only goes into the new approver inbox once the original one has completed the workitem.
Is this standard behavior?
Thanks in advance for your support,
Abraham

Hi,
There is a slight difference here.
WF is not being restarted. As I mentioned in the initial exposure, work item is not moving to the approver level 2 changed until the original approver level 2 has approved the work item( not the approver level 1).
u201CThe conflictive case goes as it follows:
o Requester creates a SC. Three levels of approval are determined.
o Requester changes approver level 1determined for another approver of the same level.
o Requester changes approver level 2 determined for another approver of the same level.
o SC is ordered.
o Workitem goes into the approver level 1 inbox. Approver level 1 completes workitem.
o Workitem goes into the approver level 2 inbox.
o Approver level 2 is out of office for a long period, therefore requester enters into the SC and changes the approver level 2 for another one with the same level.
o Work item is not going into the new approver level 2 inbox. Woritem only goes into the new approver inbox once the original one has completed the workitem.
Thanks for your feedback,
Abraham

Workitem not received in SAP inbox(SBWP)- In SOST status is waiting

Hi Experts,
After executing workflow , I am not getting the workitem in SAP inbox.
I am sending mail using BOR Object type SELFITEM and method SENDTASKDESCRIPTION.
In SOST , status is in waiting ( Send method - Remote ).
For Send method - via Internet its working fine . Mail is sent to external mail address. But for Send method Remote send requests are in waiting status.
SAPCONNECT job also getting executed every 5 mins in back ground.
SCOT-RML routing exists with Address area * , Node in use check box i, Node supports : connection test, status, trace , Supported address types - R/3 is checked.
Please let me know any other settings has to be done to send workitem to SAP inbox.
Thanks & Regards,
Priya.

Hello,
"After executing workflow , I am not getting the workitem in SAP inbox."
You are confusing workitems with emails. SENDTASKDESCRIPTION = email.
regards
Rick Bakker
hanabi technology

Workitem not receiving in workflow inbox

Hi All
Workflow working fine in Dev110(development system), but not working in DEV130(Unittesting) . In Dev 130, once workflow is triggered through background proces(WF-BATCH), workitem is showing up in WF outbox... but not showing in WF inbox.
Please suggest if you have any idea with detialed steps.
Thanks alot!
Ravi

Martin
   when i stated workflow, Yes dialog workite created in DEV110,its howing like this in log details of dev 110.
Background work item created
Execution started automatically
Work Item Processing Complete
          9 Is Special is Associated
        525 Form Number 0000006833 fo
Dialog work item created
but when i start workflow in DEV130,its workflow sucess full, when i go logdetails , its showing
Background work item created
Execution started automatically
Work Item Processing Complete
         9 Is Special is Associat
       175 Is ELL
       198 Is NCLB
       349 Decision Taken
note: here Iam creating position online form , i am passing specialad values.
when special find its wants to take decision specied found. configuration everything fine , now already working in 110.
pls Can u clarify where is the problem , how should i get message to workflow inbox.
Thanks
Ravi
Message was edited by:
        ravi naidu
Message was edited by:
        ravi naidu

Multiple approvers and one approver execute the workitem without complete

Hi all,
In case of multiple approvers, if approver-A executed the workitem but cancel it without complete. The workitem will stay only in approver-A SAP inbox and disappear from other approvers' inboxes. Is this a standard way?
For whatever reason, if approver-A cannot execute the workitem. What can be done by workflow administrator to make the workitem appear again in other approver's inboxes?
Thanks and Regards,
Donald

Hi Donald,
Yes this is the standard behavior of workflow.
If you send the work item's to the multiple approver's and one approver open the work item it will disappear from all other's inbox.
if the approver A open's the work item, then it will disappear from other's inbox. You can use the fm SAP_WAPI_FORWARD_WORKITEM to forward the work item's to the other user.
Thanks,
Viji.

Next Approval not selected, workitem now in outbox and looks like 'hanged'

Hello experts,
There is an approval workflow that got lots of approval levels.
Lets say:
Level1 - 4 person
Level2 - 8 person
At level1, user can select any of the approvers of level2 to send their approved workitem to.
The issue is, the Level1 approver not selecting any level2 approver, the user just closed the selection box. Now, the workitem is appearing in the outbox instead of the inbox - looks like hanging to me.
Is there any way to continue the workitem?
Thankyou in advance

Check the workflow log. Probably the task is created without an agent. You can use transaction SWI2_ADM1 to find these tasks and correct them. You will need to change the container.
I would also suggest you change the workflow so if the user doesn't select an agent you will loop back and represent the task, so he couldn't leave it without selecting an agent.
Regards,
Martin

PO Release WF not sending workitem to inbox

Hi All,
We are working on activating the PO release WF 'WS 20000075'. We activated it thru OOCU and it is triggering when we save the PO (i checked in SWEL) but we do not see any workitems in SBWP (inbox). I 'Agent Assignment' is in GREEN and is a 'General Task' in the task.
This is the config we did in SPRO:
SPRO -> MM -> Purchasing -> Purchase Order -> Release Procedure for Purchase Orders -> Define Release Procedure for Purchase Orders > Workflow -> Here we assigned OT as US and respective User ID's for Release Codes.
When i double-click on the entries in SWEL:
- The 'Receiver Data' section is BLANK and in the 'Trace Data' section, action says 'No receiver entered'.
I think the WF is not able to read the AGENT. Not sure. Can anyone please help me with this/
Thanks in advance.
Karuna.

Karuna,
How have you managed to read the agent?

Approver again receiving workitem in inbox

Similar Messages

Maybe you are looking for