Approver Not Found IN CUP While Executing a Request.
Hi Experts,
I have created a new request type for new role creation in CUP(AC 5.3 SP7),created a initiator for that and included the new request type in that.I have also created a new stage and selected a custom approver determinator with attribute type business process(approvers set).
Finally, i have created a path with two stages,first-manager and second of process owner.I can see clealry the approver determinator are selected in both the stages of path.
After performing the above configuration in workflow,i am creating a request for the same and getting the error that no approver found at process owner stage.
Please provide me any tip to resolve the issue.
Regards,
Mukesh
Alpesh,
You are absolutely right,when i changed approvers on the base of request type in CAD,it went right to the next stage.But, when i am trying to set approvers on the base of business process i am not reaching into next stage, reason is while creating request I am not choosing the business type.
Now, i am not geting any business process in the drop down list(while creating request initially),also, i am not able find any option in CUP from where i can specify the business process.
Please guide me.
Thanks understanding the issue.
Mukesh
Similar Messages
-
GRC CUP Error creating request. Approver not found
Hi,
We just upgrade from GRC CUP 14 to GRC CUP 15.6 support pack.I already performed post upgrade steps and when i try to create a request i am getting approver not found.i didnot change workflow.In stage for role approver we have approver determinator "role".
system log report
com.virsa.ae.workflow.NoApproverFoundException: No approvers found for req no : 493, for reqPathId, 662, for path, PROD_APPRV_PATH and approver determinator : Role
at com.virsa.ae.workflow.bo.WorkFlowBOHelper.handleApproversTransactions(WorkFlowBOHelper.java:1469)
at com.virsa.ae.workflow.bo.WorkFlowRequestCreateHelper.handleWFForNewPath(WorkFlowRequestCreateHelper.java:278)
at com.virsa.ae.workflow.bo.WorkFlowRequestCreateHelper.createNewWorkflow(WorkFlowRequestCreateHelper.java:167)
at com.virsa.ae.workflow.bo.WorkFlowBO.saveNewWorkflow(WorkFlowBO.java:120)
at com.virsa.ae.accessrequests.bo.RequestBO.saveNewRequest(RequestBO.java:579)
at com.virsa.ae.accessrequests.actions.CreateRequestAction.createRequest(CreateRequestAction.java:381)
at com.virsa.ae.accessrequests.actions.EUCreateRequestAction.createRequestHandler(EUCreateRequestAction.java:135)
at com.virsa.ae.accessrequests.actions.EUCreateRequestAction.execute(EUCreateRequestAction.java:68)
at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:295)
at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:431)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:461)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Please let me know solution ASAP.This is high priority.
Thanks
Yakoob.It looked like some old request stuck in DB.But, not sure about it.I tried by changing the number ranges in configuration by giving the current request number in "from number",but it didn't work.
This is strange some time it gives "error creating request: path not found." and once this error gone then "error creating request : approver not found".
To avoid this i created one more stage by custom approver determinator with application attribute and approver assiged.This stage, i assigned before role approver stage then it worked,Request get created and request get provisioned.
i don't understand why it's not working,if i assigned role approver stage first in a path of workflow.role approver (approver determinator:"role" standard one, "approver" gets from configuration:roles:create role:role approver OR upload from role import).
Please help
Thanks
Yakoob. -
CUP Issue in workflow - Approver not found after SP13
Dear All,
We are facing an issue after upgrade to SP13 in CUP. The request is not getting saved and throwing an error - Approver not Found.
We uploaded the xml files also of SP13 after upgrade has completed.
We have not changed the workflow after upgrade and verified all the attributes of Initiator, CAD and approver is already available in CAD - but still we are receiving the error "Approver Not Found"
The same workflow is working succesfully in Production system which is under SP9.
Is this an issue with SP13. If any body has encountered please let us know how to resolve.
Thanks and Best Regards,
Srihari.KDear Chinmaya,
Below is the error log
Log :
2011-05-09 08:13:17,375 [SAPEngine_Application_Thread[impl:3]_25] ERROR NoApproverFoundException in Save request
com.virsa.ae.workflow.NoApproverFoundException: No approvers found for req no : 135, for reqPathId, 209, for path, CHNG_ANZ_Z6 and approver determinator : ANZ_LAC
Also, we tried with simple workflow as well with just 2 attribute logic. Still we received the same error
Thanks and Best Regards,
Srihari.K -
5.3 CUP Approver not found error
Hi Experts
Having an issue on CUP. I have created a CAD for my first stage and second stage.
1st Stage (Business Process Owner) HR and linked to approver
2nd Stage (Role type) = Single and linked to approver.
The request is created but when I approve the request at the 1st stage it throws out the the Approver not found error. The role attributes have also been configured accordingly.
Any ideas Experts your help will be appreciated.
regards,
DonovanHi
Thanks for the assistance, I've checked on the UME the approver does exist with the necessary authorizations. Maybe it issomething in the config please tell what you did maybe I missed something small in the config. I checked and the CAD in both stages are linked to approvers and they both exist in the ume. And the role itself has been linked with the attributes such as the business process and the role type being single. -
SPM in CUP in a SAP GRC AC 5.3 -- "Approver not found" & "Path not found"
hello,
I have a problem when I try to do a request.
I have configured the SPM in the CUP in a SAP GRC AC 5.3
I gives me an error about "Error creating request. Approver not found ". When I took out the Manager in the Stage it gave me this error in the request "Error creating request. Path not found".
Best regards.
Pablo Mortera.You can either type in the configuration, like the what option you selected for approver (CAD or role or...etc), or other way is to capture the change log which shows what was the configuration for that stage....
(Configuration -< Change Log -> Search Change log)
Cheers !!
Zaheer -
Dear Experts,
I am facing following problem in RAR component.
When i am changing Function associated with Risk Id. It gives me error Approver not found.
What is to be done to tackle above error ?
Rgds,
SaurabhDear Saurabh
Have you configured the workflow in CUP to handle the 'Risk Maintenance' in RAR? If not so, please configure the workflow or check for the Custom approver derminator (CAD) in the workflow in CUP, if it is already configured.
Alternatively, if you do not want the workflow to be triggered for changes you make in the Risk, then disable the work flow function, @ RAR - CONFIGURATION TAB-WORKFLOW-RISK MAINTENANCE-CHOOSE OPTION NO.
Regards
Swarna -
AE 5.2 - Detour Workflows - One of the Role Approver not found
Hi All,
My question is regarding using the Detour workflow functionality for the situation below - pls let me know if this possible or if any alternates are available.
- Main path has 2 stages (1) manager approver, (2) Role Approver.
If the Requestor asks for a Role that Does not have a Role Approver we would like to route this request to the Security lead.
- I have created a Detour Path with 1 stages - Secuity lead and associated with Stage 2 (Role approver) of the Main path based on the condition "No Role Owners"
- I still get the error "Approver not found at Stage @@@@"
Is the condition "No Role Owner" in the Detour workflow config for "Role Expert" workflows or for Access requests?
Is it possible to route the Request to Security if the Role being requested does not have a Role Approver? IF yes How?
thanks
THi,
sometimes in the Detour configuration you have the problem that the "Save" action is not saved properly.
If this entry is empty, please go into edit mode and save the detour config again, so that the action will actually display "Save".
Hopefully it works, then.
Regards,
Daniela -
VF46 is VF44 are not showing any records, while executing
Dear All,
Yesterday, we have notice that T. Codes: VF44 and VF46 are not giving any records, while executing.
Even if, we do PGI, its not reflecting in VF44.
Could anybody suggest the probable cause and solution?
Best Regards,
AmitHi,
you must first execute the transaction VF42, remove all fields marked (seems to do nothing, but it makes when you run the VF44 has data)
best regards -
''dupe of https://support.mozilla.org/en-US/questions/928117''
all website went "Not Found HTTP Error 404. The requested resource is not found." and the "Firefox cannot load websites but other programs can" page is not helping in any waysA possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*http://kb.mozillazine.org/Error_loading_websites
You can try to reset (power off/on) the router. -
CUP 5.3 - Approver Not Found for STD Determinator
All,
I am using the standard approver determinator for super user access - Super Access Owner.
I have got an SPM Owner defined in the source system table for owners but CUP is returning an error message saying that the Approver is not found.
The other Custom Approver Determinators seem to work but the standard one referencing SPM owners does not. Am I looking in the right place?
Can any of you suggest how this can be corrected?
Please advise me if you have any recommendations.
Thanks,
Simon
Edited by: Simon Persin on Aug 17, 2009 11:51 AM Updated type on title.Hi Simon,
Look at OSS note - 1350046. It may help.
Regards,
Alpesh -
Page not found error getting while access endeca application
Hi All,
I am trying to create an application in endeca. Created application , ran neccessary scripts and created pages in experience manager.
but when i try to call the application in browser . i am getting page not found error. There are some other application which is created by copying discover electronics ,
which works fine. Please help me how can i resolve this issue. I am using endeca 3.1.0.
Thanks
MarkThere's not much to go on here, but it sounds like you're trying to view changes in a "live" application. To confirm this, you should execute the configuration promotion script and then check the same application URL. You can run the promote script from inside workbench. Log in as admin, then look under "Workbench Home > Administration > Admin Console > Scripts." You should execute the "PromoteAuthoringToLive" script. Once this script is complete, then test your page again.
If this works, then it means that your application is configured such that it doesn't get immediately notified of new configuration changes, i.e. it's configured in "live" mode. -
Hi All
I have confirmed and configured the custom approver determinator for this i have allso configured the approver under roles
in the attributes section
at business process level.
This is the error below!
Failed to Process your request, Configuration Error, Approvers not found for the following : system_role name
Any assistance on this matter will be appreciated!Hi Rodger,
I quite sure that when you set up the custom approver based on role it then does not refer to the approvers linked to the role - although I think you should test the following.
Maintain the custom approver you have set-up, click on approvers > add > insert the role name > click on the arrow > then click on the + icon and search for an approver > add > save. Then create a request to see if the approver can be found.
I think that if you want to make use of the approvers that you have loaded in the role attributes then you would use Role as your approver determinator in your stage and not the custom approver determinator that you created.
Regards -
Assignment from Xelsysadm to Custom Group if approver not found!!
Hi Experts,
Currently if the assigned approver is not found ( Target type = Request Target User's Manager option) because say the manager is not set for the user, OIM by default assigns it to xelsysadm
I would want to change this to a Group (support Group) instead.
Is it possible in OIM with min customization?
Thanks for your inputs,
NHello meggs5
Depending on how the message is coming in, either iMessage or SMS, then you will report it to 2 different resources. Good to know that you already contacted your carrier, if it is from iMessage, article below will let you now how to report it to Apple.
Messages: Reporting unwanted messages sent from iMessage
http://support.apple.com/kb/ht5821
Regards,
-Norm G. -
Error "Application not found" from SICF while trying to test WD service
Hi All,
I am getting an error as "Application not found" when i am trying to test my web dynpro component service from SICF.
This service is active as well.
But when i copied the same URL and pasted it in browser then my web dynpro component opened.
And i am able to open my web dynpro compoent from SE80 also.
Regards,
AmarHi All,
Is is related to browser, because i am using IE8.
But the only doubt i have is when i am pasting the URL in IE8 then it is loading the WD page.
Regards,
Amar -
Error Resource not Found in SXMB_MONI while doing IDoc to File Scenario
Hi Experts,
I am doing IDoc to File Scenario and I am facing Following Error in SXMB_MONI,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">RESOURCE_NOT_FOUND</SAP:Code>
<SAP:P1>193c0e01-bd37-11dd-850c-d879ac131b1f</SAP:P1>
<SAP:P2>http://clarityPOC</SAP:P2>
<SAP:P3>com/sap/xi/tf/_MM_Timesheets_iDocToFile_.class</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Unable to find resource 193c0e01-bd37-11dd-850c-d879ac131b1f in the following software component versions: http://clarityPOCcom/sap/xi/tf/_MM_Timesheets_iDocToFile_.class-1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have tested the same file in test tab of mapping, execution of mapping is successful there.
Regards,
Nitin Patil
Edited by: Nitin Patil on Dec 5, 2008 7:09 AMHi Dharmveer I have done the cache refresh ID in XI Data Cache Refresh using link
http://sapnbipoc:50000/rep/support/admin/index.html
but still same error persisting
and in Integration Builder> Environment>Cache Status Overview >Problem tab
following error (initial part of the error pasted) is shown
Thrown:
com.sap.aii.ib.bom.landscape.SLDElementNotFoundException: Adapter Engine af.npi.sapnbipoc not found in SLD
at com.sap.aii.ib.server.abapcache.sld.AdapterEngineQueries.getAEUrl(AdapterEngineQueries.java:56)
at com.sap.aii.ib.server.abapcache.sld.AdapterEngineQueries.getAEUrl(AdapterEngineQueries.java:41)
at com.sap.aii.ib.server.abapcache.logons.IR_LogonData.<init>(IR_LogonData.java:26)
Regards,
Nitin Patil
Maybe you are looking for
-
Adapter doesn't fit Mac air.
Guys, I purchased an adapter from apple for my Mac air 11 from an Apple store. Long story short, adapter seems to be new gen and doesn't fit. What's up,with that?
-
if anyone can help me, please help...
-
Unable to print Quicken Checks
I work on a Mac 10.8.4. I have VMWare and Windows 7 installed and Quicken 2013. I can print reconciliation reports and check registers on my HPC3180 printer, no problem. But I cannot print checks. My printer is selected, I have followed all direction
-
Applying multiple effects to a Node?
How can I add more than one effect to a Node at the same time? I want to add a blur and drop shadow to a Shape concurrently. Can it be done?
-
Currently I own 13.5" Macbook Air (mid 2012) with OS X 10.10.2 running on it. Ever since I upgraded to it, the built-in microphone has stopped working. I made Facetime calls but my voice was not able to transfer/hear on the other side. Moreover i tri