Approver step after provisioning

Hello all,
Is it possible to make in CUP additional approver step after provisioning new user (via CUA)?
The goal is to have a manual step in SAP HR to assign structural authorization based on request comments after new user is created in HR system with approved roles. HR employee should do this step and close a CUP request only after that.
Thanks,
Anton.

Hi,
As Alpesh mentioned it is not possible in CUP/AE.
Once the CUP workflow completed all the stages approvals, the userid is created in target systems and an email will be sent out to the corresponding user (if auto-user provisioning enabled in CUP configuration)(notifications to other people too depending on the CUP configuration).
You could try forwarding the successful userid creation email notification to HRgroup email id, HR will assign structural profile and then forward the email to the corresponding user. ( I never tried this scenario - just a thought).
Thanks
Himadama

Similar Messages

  • Assign step after Approve step can't execute automatically

    I have a Assign step after Approve step in my workflow. After Approve step is completed. Assign step always shown as Error status in the workflow owner's queue. The workflow owner has to manually Perform this Assign step and send to next step.
    Is there way to let Assign step execute automatically after Approve step is completed?

    Thanks for the posting. I am using MDM 5.5 SP4, maybe that is the reason. Assignment works fine if I manually perform it during the workflow. But it can't execute automatically as part of the workflow. it needs manual execution. Do you think this will be resolved if I upgrade to SP5? Is SP5 already available now?

  • Approval Steps Deactivate after 'SAVE'

    Hi,
    I am working on Approval procedures, it's working fine, the procedure is determined along with the steps and their Approvers.
    Problem is on saving the transaction, the approval steps deactivate and no action (Approve/Reject/Not relevant) can be selected by the Approvers - I've logged in as the approver but still unable to change any approval status.
    Please let me have your responses, thank you.
    BR.
    P.S. I have removed Action Profile, Status profile and the problem persists.

    I have found a flag needs to be activated  (After the flag has been activated the 'Process Mode' type field populates a value 'B') and the other to be deactivated after which the relevant action (Approve/Reject) can be taken.
    What remains to be found is how these flags are controlled by the system ?
    Need your responses please. Thnx.
    BR.
    (seems like everyones' enjoying new year, this thread has been on top of the list since 30 hours)

  • Apply globals after provisioning

    Hi All,
    I have this workflow where provisioning is done before approval. Within this approval process a manager has a form where he can apply extra information. How do you push this new information (within the same workflow) into that userView? After the OOTB provisioning action, is the userview still available or do you have to check it out again before the approval steps are done? How is this kind of workflow realized.
    Any help is appreciated!!
    Elger

    If the question is not clear to you guys or you need additional information, please say so.
    Cheers,
    Elger

  • The approver does not show in the approval preview after saving sh. cart

    Hi ,
    I would appreciate if anyone can reply me for fixing the problem.
    Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 – Auto approval and WS10000276- 1 level spending limit approval.
    Details of the problem:
    The following steps specify the problem in detail , it is applicable for both the workflows “WS10000060 – Auto approval and WS10000276- 1 level spending limit approval.”
    1.     Shopping created
    2.     The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
    3.     Shopping cart is saved.
    4.     After saving , Check status transaction shows the shopping cart in status “awaiting approval”
    5.     The section approval shows “ No workflow started , application error occurred”
    6.     T.Code SWI1 shows the workitem created for the shopping cart but in error.
    7.     The work item container does not show any agents
    I would appreciate it anyone can reply as to how to fix it ASAP.
    Best Regards
    Pawan

    Hi Disha,
    I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
    In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
    SLG1 shows all green entries and there are no entries in RZ20.
    I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
    What should I do.. , anything am I missing .
    Thanks and Best Regards
    Pawan

  • "Crazy" parallel approval step

    Hi all,
    I'm using R3 v4.7 and I have a very strage problem in a
    workflow to approve purchase requisitions.
    I use a parallel step with 7 forks (4 mandatory and 3 optional according to the material groups). In this parallel step I use the deadlines to approve automatically after x days.
    In some cases I get the following "crazy" behaviour:
    the workflow doesn't continue in this parallel step in the normal way. The green line that highlights the flow in the log has interruptions that I don't understand and some tasks can be sent to any user since some steps are skipped wothout a reason.
    I still don't know if there are OSS notes about this issue and I should like to know from you if you have found a similar problem using deadlines. The other approval steps (without deadlines) never had a problem like this.
    I'd like to attach a screenshot of the log to be clearer...
    Thanks in advance and best regards,
    Angelo

    Hi,
    I had a similar issue a while back for a condition. The first step after the left branch somehow returned to the right branch, it looked pretty weird in the workflow log.
    I then wrote an OSS message and in the end someone fixed it, it was caused by corrupt data in some of the nodes tables, SAP couldn't tell me how this was possible though.
    Other times this can happen if you're on DEV with a couple of WF developers, it then helps to refresh all of the buffers or even logging of and logging in again.
    Kind regards, Rob Dielemans

  • GRC AC V10 - one approval step for manager and role owner

    Hello Community,
    I have one, perhaps easy, question. Where is it possible to maintain the solution of one approval step for manager and roleowner, if both are unique.
    E.g.:
    simple approval workflow: manager stage afterwards roleowner stage afterwards auto-provisioning
    So if the request is routed to the manager and the manager is also the roleowner of the requested authorization role (same UserID). The user has to approve one and the same request twice.
    Is it possible in V.10 to change the config that the user has only to approve the request once? And then to decide on which relevant stage settings are valid for this process.
    Thanks,
    Alexa

    Hi Alexa,
    We have had a similar questions raised in a project. In an ideal world, a single "Sign-off approval" would be a great functionality where the same user has to approve the same consecutive stages, but the reason for different stages would entail that the responsibilities entailed per stage differ, e.g. Line Manager would just check the over request, and the role owner etc may be reviewing the elegibility of a specifc role etc.
    If it is likely to be the same person reviewing the 2 consecutive stages, maybe a single stage workflow would be sufficient to cover this scenario.
    I think the logic you are trying to configure in the workflow is possible but will require alot of work with knowing how to create a clever custom workflow with BRF+ or the actual WF stuff in SAP itself.

  • Complete Form approval step programatically

    Hi,
         I have a Form approval step and is sent to set of agents (through org unit id assignment on step). I have a requirement to programatically (by calling FMs may be) either approve or reject this form and complete the form from agents inbox.
    I tried using following FMs but in vain
    SAP_WAPI_WORKITEM_COMPLETE - It does complete the WI but does not send the result (approve / reject back to workflow)
    SAP_WAPI_SET_WORKITEM_COMPLETD - Not of use for this requirement
    SAP_WAPI_DECISION_COMPLETE - Used to complete dialod step and not Form step.
    Thanks in advance.
    -- Amit

    Can you clear us what kind of workitem it is  I mean is it a decision workitem? or a workitem which needs a user interaction? e.t.c if it is a decision workitem and after completing the decision step programatically, if at all you want to continue to the next step of teh workflow then you have to sue the FM SAP_WAPI_DECISION_COMPLETE  in the importing parameter DECISION_KEY you have to sepcify the value, 0001 for Approve 0002 for Reject 0003 for Review.
    Ooops sorry to ask you again what type of step it is , you mentioned it in the question , but when it is a form step with APPROVE or REJECT then the FM SAP_WAPI_DECISION_COMPELTE works

  • Adhoc Approval Step

    Running on SRM 7.0 -   Processed Control Workflow.  Is there a way to tell on a current approval step that an adhoc approver has been added.  In the BBP_DOC_CHANGE_BADI  we are wanting to put some automated comments in the approval note, so when the adhoc agent gets the work item they will see the notes.   I know after getting out of the BBP_DOC_CHANGE_BADI, that table /SAPSRM/D_WF_016 gets updated and there are some other tables that have the next level id, etc.. and there are classes and methods that I can use, but I am looking for some type of way to know during the badi, that the next level coming up will now be an adhoc level instead of the next pre-determined level done that was set at the submission of the shopping cart.

    Hi,
    Which SRM version are you using??Please see if the foll notes help:
    1090619 - Problem creating ad hoc agents, no users in wf nodes.
    903200 Note for approval status not getting updated
    910612 additional note fro SC approval BADI's and WF's
    649551 Approval status not getting updated-related note for SP8
    690716 Approval status not getting updated-related note for SP8
    930750 restart of classic WF's(issue is with Support pack 9)
    525577 Approval Preview - Details for approver not displayed.
    Note 999528 - Adding Ad Hoc Approver fails due to comit error
    Note 952108 - Incorrect error message when approvers are entered
    Note 809157 - BBPPREVIEW: Error "Value too large" as of fourth approver
    Note 994735 - All BAdI workflows: ApprovalIndex does not begin with 1
    Note 924064 - FM BBP_WFL_DIN_FILL_APPROVER: Approvers may be incorrect
    Note 983128 - Approval WF Fragment Has No User Assignment
    related links:
    SRM 4.0 : Limit PO not showing Approver in Approval Preview
    After Add Approver by Approver Preview
    Re: SC item approval - Approval preview does not display approvers
    BR,
    Disha.
    <b>Pls reward points for useful answers.</b>

  • Page not found or displayed in the approve step

    Hi all
    when i am performing the approve step then i am able to do the mark as approved step. but there is no stop button is displayed for me when the approver wants to stop the task after marking as approved.
    how to gets displayed the stop button in the UWL task. is there anything required to assign permissions??
    Thanks
    Regards
    Sunil

    Hi Sunil,
    when i am performing the approve step then i am able to do the mark as approved step. but there is no stop button is displayed for me when the approver wants to stop the task after marking as approved.
    how to gets displayed the stop button in the UWL task. is there anything required to assign permissions??
    According to me,
    You need to click on the Next Step. The Workflow will automatically reach the Stop step. It will not show as a button to be clicked. Go to the UWL and check the status of the Workflow. Hopefully you will find it as Stopped.
    Hope it helps.
    *Please reward points if helpful.
    Thanks and Regards
    Nitin Jain

  • Approval step without capacity ad hoc

    Hi,
    In some workflows for some users we get the error message when we want to previsualize the approval levels of a Shopping Cart:
    "Approval step without capacity ad hoc, prevision impossible"
    What is the reason for this error message and how to correct it.
    Thanks for any reply,
    Aart

    Hello Latha,
       This error will not come until you add Ad-hoc approver at last level..for an example.. there are 5 approvers determined by Badi.. You will get this issue when you add Ad-hoc approver after 5th Level of approver then all approver(Including Ad-approver) approved the SC / PO. Here is the solution for this issue.
    write the code in your Badi after you appended the approval_table.
        data : lv_index type i.
        describe table approval_table lines lv_index.
         if actual_approval_index gt lv_index.
         no_further_approval_needed = 'X'.
         endif.
    please let me know if you need anything help.
    John.

  • Approval step without ad-hoc capability. No preview possible

    In both SC and PO WF, the approval preview shows the text  :" Approval step without ad-hoc capability. No preview possible"
    Can you tell me what could be the problem ? .I can approvers determining correctly from the badi . In the preview I can see approvers correctly . this message still shows after approving shopping cart completely also.
    Thanks in Advance .

    Hello Latha,
       This error will not come until you add Ad-hoc approver at last level..for an example.. there are 5 approvers determined by Badi.. You will get this issue when you add Ad-hoc approver after 5th Level of approver then all approver(Including Ad-approver) approved the SC / PO. Here is the solution for this issue.
    write the code in your Badi after you appended the approval_table.
        data : lv_index type i.
        describe table approval_table lines lv_index.
         if actual_approval_index gt lv_index.
         no_further_approval_needed = 'X'.
         endif.
    please let me know if you need anything help.
    John.

  • Approval step without adhoc capability. No preview possible

    Hi All,
    I'm using the standard n-step approval workflow (SRM 5.0) for shopping cart and have implemented the workflow badi. It works good for the approval process.
    While the user rejects the cart it works good until the 2nd level of approvers. But from the third level though the cart gets rejected it's throwing me the error
    " Approval step without adhoc capability. No preview possible " in the graphical overview.
    Can anybody please help me to overcome this issue. Points will be awarded for the solution.
    Thanks & Regards,
    Prasnna

    Hi,
    Which SRM version are you using??Please see if the foll notes help:
    1090619 - Problem creating ad hoc agents, no users in wf nodes.
    903200 Note for approval status not getting updated
    910612 additional note fro SC approval BADI's and WF's
    649551 Approval status not getting updated-related note for SP8
    690716 Approval status not getting updated-related note for SP8
    930750 restart of classic WF's(issue is with Support pack 9)
    525577 Approval Preview - Details for approver not displayed.
    Note 999528 - Adding Ad Hoc Approver fails due to comit error
    Note 952108 - Incorrect error message when approvers are entered
    Note 809157 - BBPPREVIEW: Error "Value too large" as of fourth approver
    Note 994735 - All BAdI workflows: ApprovalIndex does not begin with 1
    Note 924064 - FM BBP_WFL_DIN_FILL_APPROVER: Approvers may be incorrect
    Note 983128 - Approval WF Fragment Has No User Assignment
    related links:
    SRM 4.0 : Limit PO not showing Approver in Approval Preview
    After Add Approver by Approver Preview
    Re: SC item approval - Approval preview does not display approvers
    BR,
    Disha.
    <b>Pls reward points for useful answers.</b>

  • What is the next step after editing or triming a video ? What type of file format to save and what to do after that ?

    what is the next step after editing or triming a video?
    what type of file format should be save and what to do after that?

    In the early days of digital video editing, an export render could take hours!  Not many applications are as hard on system resources as video editing, and rendering the final edit is probably the most system intense action of all.  
    Head on over to the Premiere Pro Hardware forum to see what sort of computer hardware the pros use for NLE (non linear editing), or to the PPBM5 site for a better look.
    PPBM5 Benchmark
    Also check out the specs on the Video Guys website

  • TS1814 I am trying to update my Iphone 3 and when i get to the activation step after a few minutes it shows a message that says " Your iPhone could not be activated because the activation server is temporarily unavailable. Try conenecting your iPhone to i

    I am trying to update my Iphone 3 and when i get to the activation step after a few minutes it shows a message that says " Your iPhone could not be activated because the activation server is temporarily unavailable. Try conenecting your iPhone to iTunes to activate it, or try again in a couple of minutes.
    If the problem persist, contact apple support at apple.com/support
    I been trying for a few times now and I keep getting the same message. How can i fix it? now my phone doesnt work.

    These are the steps mentioned in the article iPhone: Troubleshooting activation issues
    Perform the following steps if you receive one of the messages above:
    Restart the iPhone.
    Try another means of reaching the activation server and attempt to activate.
    Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
    Try connecting to iTunes if you're unable to activate using Wi-Fi.
    Restore the iPhone.
    If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.

Maybe you are looking for