Approver Tab in Graphic View

hi,
For all the SC when i see the approver Tab i am not able to see the approve hierarchy in graphic Form .so i am going for Table display.
how to restore this problem

Hi,
Please check with your SAP BASIS team .
All the approvers can be seen in Graphic also.It is a JAVA SCRIPT
so contact your BASIS team
Regards
G.Ganesh Kumar

Similar Messages

SRM 7.0 Approval Flow in Graphical view

Hi experts,
I'm upgrading from SAP SRM 4.0 to 7.0.
In SRM 4.0 I was able to view, in a shopping cart, for example, the approval structure in graphical view and in a table view.
In SRM 7.0 I can only see the approval flow in a table view. How can I see the approval flow in a grapical view?
Thank you,
R Silva

Hi Silva
srm 7.0 - Only Table is only AVAILABLE. no more graphical overview in SRM 7.0 on wards.
SRM 4.0 /5.0 - Table as well as Graphical over view are available.
graphical overview was not supported in SRM 7.0 on wards as per standard.
Muthu

Mycurrent portal template defaults the view of approval preview to Graphic.

Hi Gurus,
My current portal template defaults the view of approval preview to Graphic in SRM ,but We would like to change this so the default view is table instead.
Is there any possible way that we can do it easily, first of all how feasible it is?
Can any one suggest me the process to follow up for this.
Best Regards,
Sairam.

Hi
Please check Notes
Note 1077956 - Follow-on document display: Tabular displ instead of applet
Note 1028482 - Approval preview: Tabular display instead of Applet
Approval preview in SRM in table form by default...
Please look in SRM - SPRO Settings ->
Here is the path ->
SRM Server -> Cross-Application Basic Settings -> SAP Business Workflow -> Activate Signed Java Applet for Approval Preview and Documents
Deactivate java applet approval preview
Also, please see the SAP Consulting OSS Notes, which talks about the same problem ->
Note 1077956 - Follow-on document display: Tabular displ instead of applet
Note 1028482 - Approval preview: Tabular display instead of applet
Deactivate java applet approval preview
Hope this will definitely help. Do let me know.
Regards
- Atul

Adding custom fields to notifications-approval tab alv grid

Transaction IW21 - Create PM Notifications.
on the Approval Tab - there is an ALV grid that contains lots of fields. I know that i can click on the upper right hand corner and modifiy the layout by hidding fields. I want to add some custom fields to this grid.
I added my fields to view QMSM and now when I look at the database table using SE16 - i can see my new fields.
But how do I add them to this ALV grid?
Please and Thank you,
Julia Ramos
Orange County Public Schools.

I have read SAP OSS NOTE: 586523 Customer-defined fields in list editing. This note helped me add these same fields to many of the standard reporting transactions. IQS8, IW28, IW29, IW38, IW39
I added my fields to
QMEL - Quality Notification
RIHQMEL_LIST - Display structure reporting for QMEL
RQMQMEL - Quality notification - header data
RQMQMSM - Quality notification - measures (reporting)
Then i ran SAP program BALVBUFDEL. This program refreshs the alv buffer. This was very cool in that it allows us to access and report on all of my custom fields thru the standard reporting transactions!
I thought this same logic might work for transaction IW21. I found the structure used by the approval tab alv program, QMSM, and created an append structure, ZAQMSM with my fields - ran the balvbufdel program to refresh the alv buffers - but i still can not see my fields in the approval tab. I believe that there must be a way to do this - i will keep trying different things and read thru move OSS notes. If you have any sugestions or ideas - they would be greatly appreciated.
Thanks

Graphical view for confirmations

Hello,
Can some one tell me the transaction code for viewing the graphical view of confirmations done for the operations of PM order? The Sap tcode for checking the data of hours of plan vs actual is S_ALR_87013432.
Regards,
Narendra

Hi
SAP Note 1028482 Approval preview: Tabular display instead of applet
The following note gives you the option of choosing either the table display or the graphic display as default :Note 1077956 - Follow-on document display: Tabular displ instead of applet
please check the above notes recommended by SAP.
regards
Muthu

WS14000133 Graphic View - green line

Hi friends,
I have a question that, When i goto swi2_freq t.code to see SC graphic view of a SC, I can see that 'Shopping cart created' Event is not starting point but the parallel process 'Workflow started' is showing starting point as GREEN Line indicates. Can any one please give why Green line is not showing as starting from 'Shopping cart created' . But WS14000133 has event linkage (Triggering event )as BUS2121-SAVED then why SAVED event green line is not showing in the graphic view.
John.

Hi All
I am using Application controlled WF-WS14000133. Triggering event (BUS2121-SAVED) is activated via SWE2. I am creating the shopping cart but i am not able to see the event-SAVED in event trace (SWEL, eventhough it is swiched on).
If i check in SWI2_FREQ, workflow got triggered and starts from Workflow started(green line), not from the event. But if i deactivate this event linkage in SWE2, i am not able to order a shopping cart (says, "No Approval workflow found").
Please let me know, why the event is not traceable from SWEL. I have worked in R/3 workflow but new to SRM.
Vinoth

Approval tab IDM 6.0

Hi All,
In the approval tab in IDM 6.0 there is a dropdown for viewing the list of administrators to see their approval queues. Where can we find the reference to this (which form or workflow)???
I am looking at 'Approval Form' and 'Approval Library' but cant seem to find it. Am i looking at the right ones?
Any help is appreciated.
Thanks,

UserForm - Work Item Confirmation has the reference to the list of approvers. - Variable is <ref>forwardingUsers</ref>
And also check out UserForm - Work Item List - Varaible is <ref>users</ref>
Edited by: kjj0209 on Jun 30, 2008 12:45 PM
Edited by: kjj0209 on Jun 30, 2008 12:46 PM

CM14 BI Publisher - modifying an existing Data Model, the Graphic View in Query Builder does not display

I am trying to edit the default forms/reports that come with CM14, trying to edit the data model, data set, (to get to the old Infomaker style graphic view) , the Query model does not display (error the list of tables is too long..) Oracle tell me the limit is 60, there are not 60 tables referenced in any CM report.
Does this Query builder view work at all on any report?
(bigger question, we are moving from CM12, should we move to CM13 which works with infomaker?)
Thanks,
Paul L

Kurt, thanks for your replies.
A couple of notes/clarifications.
1. You are correct that BI works better in Firefox--I have observed issues with the BI display when using IE. I would recommend using Firefox too.
2. You are correct about the way to get to the Query Builder to see a graphical view of data tables. There are basically two issues with this that I mentioned, but will re-iterate:
a. If you have an EXISTING query in the data set, then click the "Query Builder" button, this will remove the existing query that's there, it will NOT display the existing query in the query builder. Query Builder works only to create a NEW query from scratch.
b. Query builder is limited to selecting 60 fields max in your query. If you are creating a large report with many tables, you may find that 60 fields is not enough. For that you will have to work in the SQL edit screen rather than using the query builder.
I would impress on anyone developing CM14 reports that they become familiar with the database schema and relationships to avoid problems when developing your BI reports. You should be able to find the tables and joins documentation in the knowledgebase.

Reg:Graphical view in workflow

Hi to all,
Now i am having IDES ECC 6.0 , I had put the TC SWDD i am getting workflow screen. But i couldnt find out the graphical view of that screen.But the graphical view and all i can get through ECC 5.0 version.
Kinldy do the helpful.
Thanks,
Sankar M

Hi Rob,
I am working in IDES ECC 6.0 , In that i gone to SWDD->EXTRAS->options->Modelling view -tree only is there. I couldnt change into Graphical network.That particular Modeling view button is in disable mode.What can i do for that?
Thanks,
Sankar M

How to create and use tabs for WD views

Hi,
I have created two views. A button click from onw view leads to the second view and vice versa.
I would like to add tabs to the two views, in a way that when pressing the button on the first view - the second one will open, and the tabs of both views will be seen, in a way that will enable me to navigate between the views using the tabs.
Is this possible to do? or must I implement one view with a tab strips? (whcih means - rewriting the secod view into the first...)
Thanks,
Oren.

Hi
There is no need to use inbound outbound plugs and navigation links when you use Tab Strip
You have a tab strip control in which you inserted two tabs
each tab contains transparent container which intern contains ViewContainerUIElement, so your Outline looks like this
TabStrip[TabStrip - Child]
--Tab[Tab - Child]
Tab_Content[TransparentContainer - Child]
viewContainerUIElement[ViewContainerUIElement - Child ]
Tab_header
--Tab1[Tab - Child]
Tab1_Content[TransaparentContainer - Child]
viewContainerUIElement[ViewContainerUIElement - Child]
Tab1_header
So you have two ViewContainerUIElements in Two Tabs, you need not write any code to navigate if you select second tab second view is displayed and if you select first tab first view is displayed.
Regards
Abhimanyu L

Organizational structure graphical view

Hi Friends,
we have problem with the organizational structure graphical view in OM. the system can not read the texts fonts, we don't use english characters. what should we do?
Thanks

Hi there!
Hope you both don't mind but I am piggy backing on your OM discussion. You both sound like have good experience in working with Turkey. I am trying to find a standard infotype to store a Turkish Identification no, SSN, and Local ID card numbers. I am leaning towards IT0185 but first want to check around to see if there are Turkish infotypes specifically for these types of documentation. Your feedback is greatly appreciated.
Thank you in advance.
Dina

Changing the Chart Title in Graphic View in Interactive demand Planning

Hi All,
Is it possible to change the Chart title in Graphic View in interactive demand planning screen.
When we go to interactive planning after loading the data we go to Univariate forecast then switch to graphic, the chart title shows the selection at which the planning is done. For eg; If I plan at die level and i select a particular sap material, the chart title displays Die value and not the material value.
Is it possible to change the chart title such that it displays all the selections made in selection winodw, like in the above case both Die value as well as SAP Material Number.
Thanks and Regards,
Diana

Dear Diana,
unfortunately this is not possible.
The chart title is build from the planning book name + the Show characteristic in the shuffler (+ available nav. attributes of the Show char).
The functionality you requested doesn't exist in standard.
Regards,
Tibor

System not displying in graphical view in solution manager

Hello,
I added 10 system in solution manager for centralize monitoring but 8 of them are displaying in graphical views another 2 system are not displaying . all the systems adding procedure is same. but still 2 of them not displaying in graphical view can anyone tell me the chouses of this type of error .
Kindly guide me to short out this issue
Thank you
Deepak

Hi,
Open your Solution of the affected systems (12 Systems not appearing in your Monitoring). Go to Solution Landscape Maintenance (Under Solution Landscape).
Compare the Leading role of the solution with the role of the system in the logical component.
If these are different, right click on the system and select Put in Solution.
Hope this helps.
Feel free to revert back.
-=-Ragu

Graphical view of share point survey issue

Hi All,
I have created a survey in my sharepoint site with a column as Choice (Check boxes (allow multiple selections)).
When I go to graphical view it is showing extra column if users selected more than one option.
How can I avoid that and show the percentage only to the choices (if they choose more than one also).
Regards
Koti

Hello,
unfortunately, that's how SharePoint works. The values of a multiple selection are stored in this one field and the chart shows exactly what SharePoint has stored.
You may need to export the survey results to Excel and then split multiple selections into single cells in order to create the chart you want to see.
cheers, teylyn

Graphical view in BPE

HI , I am Using Sun IDM Version 5.5 .
When before I using 5.0
The graphical view of the form appears in the lower right pane of the BPE display. Itdisplays the form HTML as displayed by Identity Manager.
Bu tin 5.5 i am not finding out. can any one help me how to view Graphical view in 5.5 .
Thanks
Veronica

Jim
I tried but i was configured my web browser , I am not sure how to configure it, and it wont show in the BPE at right side down in 5.5 ?
can you tell me How to configure Webbroser?

Approver Tab in Graphic View

Similar Messages

Maybe you are looking for