Approver to be able to approve backdated SC's

Hello All,
We are running on SRM 4.0(classic scenario).
My reqt is that when approving backdated SC's,in the std functionlaity the system doesnt allow the Approver to approve teh Backdated SC's but when he changes the date and tries to approve ,he is able to approve the SC,i need to allow the approver to able to approve the Backdated SC's also since in our scenario,the approver will most of the times approve the SC 1 day after the SC has been created.(Escalation procedure is not preferred as tehe time limit is not definate).
Regards,
Disha.

Hi Yann,
Actually now i am facing 1 more problem that by changing the message type,the requisitioner is now able to change the "Required Date" also while adding the items to the SC.....
I dont want that any requsitioner should be able to change the "Required date" but yes approvers should be able to approve the Backdated SC's.
Will this require any development?
Regards,
Disha.

Similar Messages

Goods issue in previous date

Dear Experts,
I have a problem with previous period postings.
We are entering in to production server. Present date is : 01.04.2009.
Now the open period is 10th of 2008 (January).
But we are starting the transactions from 01.01.2009 (3rd quarter of 2008)
when we issue material against to sales order, system not allowing to issue, and throwing an error "material can not be issued in the past date".
how to solve this problem.
can any body help me in this.
regards
Anand.M

Now the open period is 10th of 2008 (January).
But we are starting the transactions from 01.01.2009 (3rd quarter of 2008)
I dont know what you mean by these statements
Most propably your MM period would have been closed (MMPV transactions)
To open the closed MM period can be done MMPI
But extremely risky and not advisable production server
Check with SAP
Normally today 01.04.2009 you close the period of march 2009 thro MMPV and still will be able to perform backdated goods issue for march only
SAP standards allow one monthof closed period as grace time
Regards
Raja

How do I receive credit and or reimbursement for overbilling?

How do I receive credit and or reimbursement for overbilling? I have set data usage several times and have been billed for over usage. I just switched to the family base plan and I am being overbilled for my next billing statement.My Verizon

Hello YKW, help is here front and center! The Family Base controls are not able to be backdated to the beginning of the cycle. If the overage was incurred before Family Base limits were set, they will show up on the next statement. Please send us a direct message so we can review the controls: http://vz.to/1b8XnPy
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Manager is not able to Approve the leave

Dear Freinds,
Please help me in solving this below issues.
EE has applied for leave thro ESS. Manager have recd a confirmation from Work flow system . But the same is not reflecting in Manager MSS . Therefore he is not able to approve the same . However, Manager is able to approve the leave for others.
I cheked in PO13 and the realationship and dates are perfect. Can anyone tell me what could be the reason.
IS there any T-code to check the Email communication that both had.

Hi,
Please check the workflow log in the system using transaction SWI1 for the date on which the EE has applied for leave,
check the Agent assigned for approving the leave by clicking on the Agent button - confirm that this is the same manager.
Also this is assuming that in MSS under the UWL other employees leave requests are visible,
so as to eliminate portal side issues.
Regards,
Samson.

Not able to modify list of approver on when Shopping Cart is on Hold

Hi All
We are facing the following situation.
We are creating a new shopping cart and then putting it on Hold. If we open the shopping cart again ( the SC being on Hold), we are not able to add or change the app rovers in approval flow. But if we order the Shopping Cart and then open it back and try to add or change the approvers we are able to do this.
We are using BAdI BBP_CHNG_AGNT_GET to add or change approver and we are trying to debug this BADi to analyse the issue. But we are not able to catch what's happening when the SC is in Hold status. Is there any other method by which we can check in debugging what's happening in the BBP_CHNG_AGNT_GET with SC on Hold.
Any information in this regard is much appreciated.
Best regards
Indrajit Dutta Choudhury
Atanu Mondal

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Manager not able to approve leave of the employee on the MSS

Hi There,
When the manager execute the work item on the portal, a run time error occurs on SAP and as discribed on ST22, is caused by function module HR_HK_DIFF_BT_2_DATES which returns a CX_SY_ARITHMETIC_OVERFLOW exception. I Think that this function is supposed to return the difference between the start date of the leave and the end date of the leave. but on the trace, it looks like it is not receiving the end date of the leave. I cannot manage to simmulate the problem in development.
Some managers are able to approve and some can't however they have the same roles and their recored are same on HR.
Can you help me to track the real cause of this problem?
Best regards,
Flubert

The oss note that you recomended was applied as we are runing ECC6.
I addition, the problem is pointing at the following statment:
years = ( l_date3+0(4) + ( l_total_number_days / days_in_year ) ).
I want to think that the end date2 is not supplied to the function, that is the reason why it is failling.
But why would date2 not be passed to the function???
Even if it is one day leave, date2 is supposed to be passed to the function with the same value as date1 !!!
What can be the next point of investigation????
Thanks a millon!
Flubert.

We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation approvers and controllers got migrated but we are not able to map new mitigation approver and controller to the mitigation ids.

Hello All,
We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation
approvers and controllers got migrated but we are not able to map new
mitigation approver and controller to the mitigation ids.
The steps we have done below.
1. We have created user id in su01 with necessary authorizations
2. we have declared this user id in Access control owners as a
mitigation approver and assigned to the organization unit
Now we are trying to map to newly created mitigation approver to the
mitigation id but we are not able to find that approver id for the mitigation ids. (only old mitigation ids came from VIRSA only we are able to see, not able to add new mitigation approvers / controllers to the mitigation ids)
Kindly check this issue, this is very critical for us.
Thanks in advance.
Regards,
Karunakar

Hi Karunakar,
- Assign Owners to Organization unit
- Make these owners as Mitigation Approver and Monitor
- Create Mitigation Id in this Org. unit
Regards
plaban

Could not able to send email notification through approval workflow

Hi,
I am trying to send an email notification to the requester and approver on request creation and when the approver approves the request then an email should get triggered to the request with approve/reject outcome. All the SOA configuration has been done and also able to send test email through SOA console but could not able to send email through SOA composite.
For configuring an email notification, I am using notification tab in ApprovalTask, but still problem is not resolved.
Please help me in resolving the issue.
Thanks.

Use this link to check again whether you have configured the Email driver properties properly. http://www.iamidm.com/2012/09/oim-11g-r2-lab-6-managing-notifications.html
Also check whether any firewall issue is there which is preventing OIM to contact the email server in sending out emails. Check the logs if there are any issues.
Also check this system property 'RequestNotificationLevel'. This property indicates whether or not notification is sent to the requester and beneficiary when a request is created or the request status is changed. If the value is 0 for this system property, make it 1.
I was facing a similar type of issue due to two reasons:
1. System property
2. Firewall
Check both of them and try again.
Edited by: Durgaprasad on Apr 15, 2013 2:08 AM

Employee is not able to Edit the Request if it is Rejected by the Approver.

Hi,
we are working on EHP5 , ECC 6.0 . We are implementing claims and reimbursements . In our process if the employee raises the claim request in the portal and the approver rejects the claim request , employee is not able to edit the request in the portal . So please suggest the solution for this .
Thank you
lokesh

Hello Lokesh,
The edit feature of claims is on the basis of status. Approved & Rejected claim requests cannot be edited. The approver has got the option to edit the claimed amount on basis of the proof attached.
Hence the approver can edit and then decide to approve or reject. But employees in case of any
rejection of claims needs to reapply with a new claim.
Regards,
Pankaj

Approver able to change a document

Is there a way that the person approving a document could change the Quatities or the price of a docuemnt and then approve it? My customer approves all Credit Memos as the goods are returned, BUT when the returned product arrives the approver can not mnake adjustments. It would make sense in my opinion to allow the approver to be able to make changes to the document. Also it would be nice if the originator of the document could change the document before it is approved or regected by the approver.
Thanks and if someone knows a work around please advise
Dana

I believe that the doc. must be rejected for changes to be made.

BE NICE TO BE ABLE TO BURN BLUE-RAY DISC, I TRIED AT LEAST 3 BURNERS APPROVED BY ADOBE WEBSITE AND IT'S NOT WORKING

BE NICE TO BE ABLE TO BURN BLUE-RAY DISC,
I TRIED AT LEAST 3 BURNERS APPROVED BY ADOBE WEBSITE AND IT'S NOT WORKING...

Maybe the problem is caused by a stuck CAPS LOCK key? 8/

We are Not able to Add, approved A/P invoice - Error - Tax code Missing

Dear Experts,
In A/P -> A/P service Invoice
When We are going to Add Approved Invoice ,system can not allow . This
invoice is go through a approval process ,system can not allow to change any
of document row during approval process or after approval process.
we are unable to add tax or remove line item after approval.
We are Not able to Add, approved A/P invoice - Error - Tax code Missing
[A/p Invoice Row -Tax code] Line 3 [Message 3513-14]
I think ,It should allow the system to edit the row tax or amount after or during
approval process

Don't worry,AP invoice is not get posted,it will be saved as draft only,
Default tax code for purchase documents using tax code determination.
Create new ap invoice with tax code and send it for approval.
Orginator should ensure all mandatory fields in document are entered correctly before
sending it for approval.

Buyer not able to add Approver

Hi all,
I have an issue where buyers are not able to ADD APPROVER,When the completion workflow starts the cart is in buyer ,where the ADD APPROVER button is enabled, while clicking ADD approver button does not perform any action.Could anybody advice me in this regard?. Whats the technicality behind it while clicking ADD APPROVER button?
Thanks
sibi

Hi CK,
Thanks for your Reply. Where i need to check the status.Could you please explain me?.
My issue is ,Buyer Not able to ADD APPROVER during completion workflow(WS14000044).
ADD APPROVER button is enabled , but when i click add approver button no action performed,
I keep all the relevant task as general task in OOCU transaction.
Scenario 1 : Requestor can able to add approver before the cart moves to buyer.
Scenario 2 : After buyer assign the source of supply cart back to requestor,where once again
                  requestor able to add approver.
Scenario 3: Based on the approval matrix ,approver are listed in the approval workflow where all the
                 approvers can able to add approver.
My issue here is : During the completion workflow the cart is in buyer hand where he is not able to
                           add approver- but still add approver button is enabled.
Appreciate all form of advice.
Thanks,
sibi

Not able to determine the Approvers properly due to data in Approval Master

Hi All,
Not able to determine the Approvers properly due to data in Approval master Master table error. This was affected my approval flow. plz help to resolve this.
Thank you.
Edited by: ganeshsrm11 on Apr 13, 2010 6:48 AM

Hi,
Which table are you talking about? Do you have technical table name? If it is custom table you need to fix your custom program code.
Regards,
Masa

When will my own persona will be approved and I will be able to Use?

I have designed my own persona a day back, I wonder when It will be approved and I will be able to use it, and how I'll know whether it is approved or rejected?
== This happened ==
Just once or twice

This forum is for Firefox, Mozilla's browser only. For Personas, here's their forum which you will get much better help there:
http://groups.google.com/group/mozilla-labs-personas/topics

Approver to be able to approve backdated SC's

Similar Messages

Maybe you are looking for