Apps automatically starting after lock screen

How do I disable apps from opening automatically after I enter my password from the lock screen.
For example, Facebook or Foursquare has a message and when I enter my password the iPhone automatically launches the app to show me the message. How do I disable this?

Settings>Notifications>Facebook>Show in Lockscreen>Off

Similar Messages

Automatic logout after lock screen for long time?

When I leave my mac screen locked for long time, sometimes I see the following message after unlocking screen:
"Logout has timed out because the application [x] failed to quit...."
Where [x] is some application trying to quit, and is waiting for user confirmation. This happens even when the computer is plugged in to AC. Has anyone else seen this problem? TIA

Found it:
http://www.askdavetaylor.com/canmac_automatically_log_out_user_afterinactivity.html
D'uh

Can ILOM console app automatically start after power up?

Our environment requires that a x4600 be power cycled (via circuit breaker) on a daily basis. The operator is required to monitor Solaris boot progress/status and typically does this via the serial console just like they do for Netra 440s and other systems.
Can ILOM be configured to automatically start the /SP/console app upon powerup?

Try a Safe Boot... holding Shift key down at bootup.
Safe Boot is a special way to start Mac OS X 10.2 or later when troubleshooting.
http://docs.info.apple.com/article.html?artnum=107392
Yes something got damaged, it's just with 100,000s of files, we might have a hard time finding it.
Two other diagnostic tools...
Open Activity Monitor, see if anything is hung & in red.
Console in Utilities, will allow you to check the Logs for the time/date of the shutdown and we should have some message.

Downloaded apps not starting after splash screens

I've had this device for about a month.
I recently paid the $10 to upgrade the software to version 3.0.
There are 1.9 free GB on the device.
I sync it via a Windows Vista machine.
I have not downloaded any apps through iTunes on the Vista machine. I have downloaded five apps directly onto the device through the App Store. Two of the five were free (New York Times Reader, Skype) and the others I paid for.
Everything has been working fine until this morning when I tried to open the NYTimes reader. It showed the opening screen, then dropped back to the home screen. The same is happening will all five downloaded apps.
I tried syncing in iTunes, but none of my downloaded apps is listed in iTunes on my computer. Are they supposed to be there?
I've seen a few other questions of this nature, but no solution that makes any sense to me.
I'm pretty surprised to have this happening on a Mac product. I have restarted the device twice, with no change. I have also hooked the device up to my computer and tried to sync it, but I don't see any change. I'm not really sure what I'm supposed to try to sync, since I just want these apps to work, but they don't show up on the iTunes app list on my computer.

have you tried the other troubleshooting steps?
http://www.apple.com/support/ipodtouch/troubleshooting/

Camera app not shown on lock screen after iOS 5 upgrade

Camera app not shown on lock screen after ios 5 upgrade. Help!!

Push your home button twice at the lock screen.

Wifi kicks me off after lock screen

when i sign in to my wifi i get kicked off once my phone is locked any reasoning behind this?
This only happens with my wifi at work and my I.T. department does not have a solution says it may be because cisco doesnt play nicely with ios.
Seems to lose the connection after the lock screen is enabled and happens about a minute after that? Any ideas why?

Yup, since ios 6 , wifi connectivity needs to reconnect after lock screen.
Very annoying.
Ios 5 was fine.
Also when using the remote app for apple tv... After lock screen it takes forever to connect! Unuseable and not thought through.. When i connect (instantly) with iphone and ios5, my ios6 ipad as well... Lol, good job guys..;)
Also, the gateway issue since ios 6 : 255.255.255.0 , 255.255.0.0 - you screwed a lot of musicians. ( you know what im talking about my dear apple friends..)
So many software rewrites had to be made, having to use static ips etc...
Let me tell you one thing : if you update the Ios, take what works and addon, dont break it... Really... I would change my ipad back to ios 5 anytime... This release was a complete disaster compared to Ios 5 ... Steve would be thrilled....
Anyway, no hard feelings... Just fix it please, or let us reinstall ios 5.
Please take this to heart (and to the devs) ;)
Thankyouuuu:):)

How do I get an app suggested on the lock screen when someone enters my place of business?

Now with iOS 8 I am getting app suggestions on my lock screen which are relevant to where I am currently located.
What do I need to do to get that functionality inside my place of business to suggest an app when people walk in?

You have a better chance of getting the answer you wish if you repost in the Develpers Forum
Developer Forums

The camera app doesn't start from lock screen

One of the new features in IOS 5 is the ability to start the camera from teh lock screen. However, my phone doesn't allow this. Was this function built into the final release version of IOS 5?

This feature is not working on my iPad 2. When I double-click the Home button--in lock-screen position-- the iPod features appear at the top of my screen, as they always have. The photostream icon remains in place to the right of my Home screen slide lock. No camera icon comes up anywhere. I have photostream set to off and tried switching it to on, to see if this would make a difference; it does not. I'm very computer and device-literate. The problem isn't in the way I'm double-clicking the Home button. This feature is definitely not working on my iPad 2.

Xperia Z3 Compact camera error when starting from locked screen (symbol lock)

Hi
I'm a new owner of Xperia Z3 Compact and I have noticed a problem when launching camera. The app itself works perfectly well but when trying to launch camera from locked phone (screen locked with symbol) it shows only black screen with error message that camera app it unaccessible. After removing lock screen protection both camera symbol on lock screen and dedicated camera button works as intended. Is it supposed to be that way? On my previous phone I could launch camera app without unlocking screen but couldn't access any other parts of the phone. I'd love to have it working the same way here especially with the dedicated camera button.
Hoping for a fast answer.
Regards
Huma

You may need to perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Why does Messages app automatically start whenever I receive an imessage?

I'm using my mac to try and get some work done, and as a result have apps such as messages closed (I'm trying to focus.) I even have pop-up notifications disabled in the notification center. However, whenever I receive an imessage messages.app automatically opens itself, disrupting my concentration. How can I disable this behavior?

Hi,
Can you check that imagent (it will be lower case) is running in the Activity Monitor (Applications/Utilities) ?
If you have NOT set the option in Messages > Preference > General Section to Be Off-line On Quit then IMAgent should start up when the computer does.
If it have been Force Quit then it should also restart if FaceTime or Messages is started up.
If the .plist has been removed it should be recreated from defaults within the app(s) when the app if started up again.
8:22 PM Monday; October 29, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Music app not updating on lock screen

I've been having an issue where the music app is not updating on the lock screen. I'm on iOS 7.0.4 but first noticed the issue with iOS 7.03. Had the issue on two different iPhone 5's (one brand new) so I know it's not my phone.
Any ideas?

Hi Guys,
This will surely make you all music controls on for Walkman App. (After Android Lollipop Update)
SETTINGS > SOUND & NOTIFICATIONS > Find & tap WHEN DEVICE IS LOCKED and select Show all notifications menu as you desired. First one will show all in lock screen..!!!
You're Done
Regards,
Siva.

Yoga - Thinkpad message receiver for shortcut hot keys and 30 % CPU usage after lock screen or sleep

Hi! After returning from sleep or lock screen a process called "Thinkpad message receiver for shortcut hot keys" starts using about 30% of the CPU. Temps go upo to 60-70 degrees battery is being depleted quite fast. This process doesn't stop until I end it using task manager. Once ended that way, it doesn't start again even if I use sleep or lock screen. Need help with this!
I didn't use to have this problem like a month ago or so. Probably came into existence after some updates.
Solved!
Go to Solution.

ChrisL_US wrote:
Do any of you have Kaspersky Anti-Virus or Internet Security? Seems like few T540 owners also got the same problem and one of them discovered it is Kaspersky causing the problem. I can comform it too.
I am using Kaspersky Internet Secuirty 2015, when I resume my TPY from sleep, the message receiver for shortcut hot keys will show up and use 20-35% processing power which cause the laptop to heat up.
I hope a Thinkpad rep can come in to report the bug.
The T540p post link: https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/t540p-high-cpu-usage-by-shtctky-exe-ThinkP...
Thanks ChrisL_US! I do have kaspersky anti-virus 2015 installed.

SAP system doesn't automatically start after restart (but manual start ok)

Hi,
We've got a new production line of SAP EP 7.0 systems, which have CI on HP-UX and DIs on windows. The version is NW2004s SPS09.
What we see is that after a restart of the windows servers (usually because of windows patching), the SAP system doesn't automatically start up. It doesn't start up if I restart the SAP<SID>_<instance> service either.
However, I've got no problem starting the system with the MMC.
Any idea what I am missing here? is it as simple as a profile parameter ?
As far as I can see the profile used seem ok.
After a restart of the windows server the following files have log entries in the c:\usr\sap\<SID>\J<instance>\work folder
sapstartsrv.log
trc file: "sapstartsrv.log", trc level: 0, release: "700"
Fri Nov 17 15:51:26 2006
<<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
sapstart.log
Starting WebService thread
SapSSLInit failed => https support disabled
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_97
Webservice thread started, listening on port 59713
sapstart.trc
Starting WebService thread
SapSSLInit failed => https support disabled
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_97
Webservice thread started, listening on port 59713
The windows event log have the application events
(first)SAP Service SAP<SID>_<instance> successfully started.
(at the same time)
Failed to update service environment from user (STATOIL-NET\<sid>adm) environment. [ntservmgr.cpp 201]
(note that this doesn't happen for all systems which have this problem, for other there is no entry like this)
I see no failed login attemps in the security event log, but see the that a login is performed for SAPService<SID>.
Since it also fails to automatically startup when I restart the service, I am able to use filemon to see what happens at a file level. Here I see that it can access the shared file system without any problems, and can read the profile and everything.
MOM is running on the server and gets some Access denied errors since it doesn't have access to the shared file system, but I don't think that matters.
Cheers
Dagfinn

hi we are using sap bw 3.5 . database is oracle 9i
i applied a kernel patch and when i tried to start the services . there was no problem with the oracle services and saposcol but the service sap<sid>_nr did not start .
when i went to check the error in work folder ..
it say " SapSSLinit failed => https support disabled .
then i tried to start sap from cmd pmt . din`t work .
is there a way to statrt this ...
thanks alot.
arjun

Webdynpro application automatic start after j2ee startup

Hi ,
Is there a way to automatically start any specific webdynpro applications after j2ee startup
Oren

I guess you can write batch file for that.
Example
suppose you have a bat file which starts J2EE engine, startJ2EE.
You can write a new bat file with following commands.
startJ2EE.bat
explorer http://<server>:<port>/webdynpro/<URL as application>
Let me know if you need more help
Ashutosh

Macbook Pro screen is lowest brightness after lock screen

Hi,
Recently my MBP randomly has the lowest brightness after i come back to login after a lock screen... any solutions to this?

Goto
System Preferences> Keyboard>
and make sure "Use all F1, F2, etc. keys as standard function keys" is unchecked
Alternatively you can try pressing the function key on your keyboard in combination with the brightness keys. (fn) lower left.

Apps automatically starting after lock screen

Similar Messages

Maybe you are looking for