Apps built with Flex Builder 2 - 3 not compatible with new Flash Players and/or new browsers, FB4 OK

My applications built with Flex Builder 2 and 3 do not start in new versions of Flash Player and/or new browsers when run remotely. I have not been able to test all combinations of FP and browser versions but there is no problem with applications built with Flash Builder 4. Does anyone have info on this?

Hi Dimitar,
Did you close all the browsers (and applications which use
Flash Player) when you install Flex Builder 3 Beta 3 or Flash
Player? You can try manually installing it from <FB install
location>/player/ directory. Here're some
installation/unintallation instructions of Flash Player:
http://labs.adobe.com/wiki/index.php/Flex_3:Release_Notes#Installing_Flex_SDK_3_Beta_3
thanks,
Sharon

Similar Messages

Attention! Laptop Lenovo IdeaPad Flex 10 is not compatible with Windows 8.1

Attention!
Laptop Lenovo IdeaPad Flex 10 is not compatible with Windows 8.1 and Windows 8.1 Update (pre-installed operating system is Windows 8.0) .
More specifically, after update for Windows 8.1 all the drivers (including the latest) Intel (R) Iris (TM) graphics, Intel (R) Iris (TM) Pro graphics and Intel (R) HD GRAPHICS installed on this laptop does not support out of the sleep mode.
This has been checked many times by different users laptop Flex 10.
Any comments from Lenovo are absent. By Lenovo specifications for this notebook there are no conflicts with Windows 8.1. It is not true!
It is unclear why Lenovo has admitted this deficiency.
I think Lenovo Flex 10 is a mistake that will cost the company Lenovo.

Mine came with Windows 8.1

Workstation 11.1, Tools 9.9.2 build-2496486: Not compatible with GCC 5.1.0 on linux (Arch, Debian, Ubuntu, etc)

First, there are some compilation problems with the latest linux kernel and Tools 9.9.2's source of vmhgfs: vmhgfs module not compilable for VMware Tools 9.9.0 (Fusion7.1) after Ubuntu Linux kernel update to 3.13.0-46-generic (Febr. 2015) (Shared Folder Feature not working in Ubuntu 14.04 LTS (Guest) on MacOSX Yosemite (Host))?
In short, you have to patch the source to get it to compile: rasa/vmware-tools-patches · GitHub
Arch linux is a "rolling" distro, meaning we always have latest - and are usually the first to find problems before it trickles down to Ubuntu, Mint, Debian and other Linux distros. Well, now there is a serious problem that is unresolvable.
The vmhgfs source is not compatible with linux kernels built with gcc 5.1.0. It hard locks the VM, requiring a hard reset when the kernel module loads. It also hard locks during vmware-tools-install.pl torwards the very end when it says, "Guest filesystem driver" enabling. And on boot, it is vmhgfs that is being loaded when the VM hard locks.
I was able to get around this earlier when gcc 4.9.2 was in core - i just rebuilt the kernel under 4.9.2: https://bbs.archlinux.org/viewtopic.php?id=196915
Obviously that isn't a long-term solution. But now that gcc 5.1.0 has been pushed out to core, that means recompiling the kernel under 4.9.2 is no easy feat since dependencies now depend on gcc 5.1.0.
@Developers: We have a big problem with VMware Tools vmhgfs and kernels compiled under gcc 5.1.0. Given it make take years before the Debian distros get the latest and greatest, it's coming.
Because of this, and the wasted time in me having to support this mess, I may recommend to my company we no longer continue with our Enterprise account of 100 licenses of Workstation and Fusion. It is obvious in the previous thread vmhgfs module not compilable for VMware Tools 9.9.0 (Fusion7.1) after Ubuntu Linux kernel update to 3.13.0-46-generic (Febr. 2015) (Shared Folder Feature not working in Ubuntu 14.04 LTS (Guest) on MacOSX Yosemite (Host))? that VMware is no hurry to resolve even the simple build errors that the community has resolved last year with patches. Good thing too, renewal comes up in two months.
I shiver to think how long it will take VMware to release a fix for gcc 5.1.0.

Additional info...
The hard lock is a panic when mounting the /mnt/hgfs partition, which is what is configured in my fstab:
.host:/
/mnt/hgfs
vmhgfs
defaults
0 0
The reason the above is just "./host:/" is for the auto-mounting of shares on the fly, or all shares on boot. Specifying a share doesn't change anything.
Even mounting it manually panic's the kernel:
mount -n -t vmhgfs .host:/<shared_folder> /home/user1/shares
Again, this all worked fine with a kernel built on 4.9.2, but not 5.1.0.

When I sync my Iphone4 on Itunes I get a message saying that some apps cannot update because they are not compatible with my phone...also...Mail wont up/download...my provider adamant I have all the right settings..

When I sync my Iphone4 on Itunes I get a message saying that some apps (eg Find Friends) cannot update because its not compatible with my phone.
I also am not able to up/download mail even though my Provider is adamant the setting are correct...
IOS 7.1.2
would appreciate help with these issues :-)

However after part of the Itune update completed a message came up on the screen
saying "The feature you are trying to use is on a net work resource that is unavailable.
Which particular .msi file does the message go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

Adobe is not Compatible with Vista? or not compatible with 64bit Vista?

From reading through some of the threads here, I am still a
bit confused. Is Captivate 4 not compatible with Windows Vista at
all? Or just not supposedly compatible with 64bit Vista?
Has anyone tried to do a software simulation recording of the
start button, or start menu, or any control panel windows? It
doesn't register a click at all! It will not record a frame!
This is rediculous Adobe. You had, what... 2 years almost? to
develop Captivate 4? And you can't even make it Vista compaitble?
I suppose you'll drop Captivate 5 in 6 months and make
everyone pay $400 for an upgrade just so they can record anything
in Vista? This had better be a high priority update. As it stands
right now, I have to do full motion recording. If I want to do
that, I will use Camtasia!!!
Please give me an answer or a workaround.... Someone..
Anyone.
I am using 64bit and it works fine if recording within an IE
window. All editing, recording, etc functions work fine. I have
tried to do this on a 32 bit version as well with no luck
(recording start menu / button/ control panel windows/etc)
Thank you.

> The problem somehow lies in the system windows. I always
run captivate "as
> administrator". As soon as a system window is up (IE -
"control panel"
> "display
> properties" "computer properties" etc) it will fail to
record a capture
> upon
> mouse click. Same with the start menu and taskbar.
>
> Test for yourself. This used to work in WIndows XP..
What changed??
>
Captivate 3 and 4 work fine on 32-bit Vista. Neither is fully
compatible
with 64-bit Vista, so far as I know, but you should be able
to get results
by running in 32-bit compatibility mode.
Steve
http://twitter.com/Stevehoward999
Adobe Community Expert: eLearning, Mobile and Devices
European eLearning Summit - EeLS
Adobe-sponsored eLearning conference.
http://www.elearningsummit.eu

Flex 4.5 iOS app generated but error in itunes: "not compatible" - with 3g?

Are Flex 4.5 mobile compiled ipa's only compatible with iPhone 3gs and above? is there a way to get them working on a 3g phone?

Flex 4.5 doesn't officially support iOS. Make sure you are using Flex 4.5.1 which adds support for iOS and BlackBerry Tablet OS platforms.
Yes iPhone 3GS is the minimum requirement.

Epson Stylus Photo PX710W is not compatible with Mavericks

I still cannot scan with my Epson Stylus Photo PX710W. My scan driver (scan.app version 3.7.1) is not compatible with Mavericks. Who can help me?
Epson does not react to my question when the correct driver will be available.
Epson indicate to their FAQ’s, but this is will not help since the ICA scan only works when my printer/scanner is connected to my Mac via USB. I bought this EPSON printer/scanner because it was wireless. Now after just 3 years I miss this important option.
I see a lot of discussion about Epson scan drivers but little help from Epson
Who can lead me to an appropriate scan driver for my Epson device?

I disagree a bit because my Epson printer/scanner worked very well for over 3 years. It worked under Snow Leopard, Lion and Mountain Lion. But since I installed Mavericks my scanner doesn't work anymore. It's just a case that Epson is very slow in upgrading the drivers within an appropriate time on the one hand and not giving any foresight how long it takes to repair drivers on the other hand. Their website is inadequate and gives me absolute no information at all. I can understand their vision when it comes to printer/scanners which are very old i.e 10 years and mor. But not for relatively new printer/scanners.
So, if anybody can help i'll be very greatefull.

PE 13 - Project not compatible with current version of premier elements

I have PE 13 (recently installed on a system that also has PE 10)
I archived in PE 10 to a location, openend up the project with PE 13 and it appears to open just fine. I then save and close it and try to open it up a 2nd time and it fails with the error: "Project Not compatible with current version of premier elements"
I attempted to move all the media outside of the "Copied_XXX" folder per the troubleshooting steps, but it still fails even with all the media in a different location. Funny thing is that it knows about the media still because it appears in the loading content status bar at the very bottom left of the screen. it completes all 600 or so loads, but they are definitely not on timeline or listed in project assets.
Windows 7 Professional is the OS.

stegeler
There is no guarantee that a project created in an earlier version will open in a later one. The classical recommendation is to finish a project in the version in which it is created.
If you do want to try to edit the project created in the earlier version in the later version, then make sure to work from a copy of the original. Once you edit the project created in the earlier version in the later version, you cannot go back to edit the later version edited project in the earlier version.
If you have your Premiere Elements 10 project archived, then you do not want to go moving copies of the project's source media outside that Copied Folder. The copy of the project file in that folder needs to trace back to that copied media in that Copied Folder. What you are seeing in Premiere Elements 13 is probably conforming of audio and video files, processing of rendered files, and such, maybe even some indexing. You do not want to proceed in Premiere Elements 13 until you do not see any further activity in the progress bar at the bottom right of the workspace. Have Premiere Elements 10 and 13 been on the same computer?
How did you open the project file in the Copied Folder - right clicked the project file, Open With, and then selected Adobe Premiere Elements 13? What is the duration of the Timeline of the original project in 10?
Have you been working with a copy of the Copied Folder and its contents?
More on this in the morning.
ATR

Is Adobe FLash builder 4.7 compatible with flex sdk 3.5?

Is Adobe FLash builder 4.7 compatible with flex sdk 3.5?

Kind of. I never actually solved the bug, but I did make it past the install.
Upon running Adobe Flash Builder 4.7 Plug-in Installer it appeared to crash and only load a blank screen with a single unclickable button. It wasn't actually "hanging", and would react when I clicked on the program menu and moused over "Services". This would allow my clicks and keystrokes to register with the program, but only after I mouse over the "Services" menu item. For example, you need to click "okay", then mouse over "Services". When you want to enter text you need to click in the text box, and mouse over "Services". Then you need to type the text you want, and mouse over "Services" to see the text appear. It's a PITA, but you can get through the install by doing this.
After installing the FB plug-in starting eclipse with editors open appeared to cause errors. If this happens, this is because it seems that FB attempts to load when eclipse starts up. Close all editors and restart eclipse. The Welcome page for FB may pop open up. At the bottom there is a check box that will keep that form loading - check it. If the page does not open when eclipse starts, then open up an MXML file. The Welcome page should load, and you can check the box.
I hope this helps you move forward. Also, if you find an actual solution please let me know.

I have a class where I need to use SmartDraw but it is not compatible with Mac probook what are some other software programs I can use to make floorplans and building plans?

I am suppose to download SmartDraw to my computer for a class but it is not compatible with Probook is there another program that does the same as SmartDraw? I am planning a building addition and need it for the floor plans. Any help would be greatly appreciated.

There are lots of choices. Just go to the App Store and type in Cad Drawing in the search field. Also Sketchup from Google is a cloud based solution hat works pretty well.

Mail app deleted and reinstall wont open, says not compatible with OSX

i accindetally deleted my mail app and emptied the trash, when I tried to reinstall from the startup disk, it installs but wont open, saying that the version of mail is not compatible with the version of OSX (10.5.8)

The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
There is no downloadable version of Mail.app - it comes with the operating system i.e. on your install disks.

HT1933 The app purchased is not compatible with current hardware, how can I get a refund?

I purchased an app just about an hour ago and it tells me that the app is not compatible with the hardware I already have and in good working order. I already bought an app for the same hardware for my iPhone, it's just different version for the iPad, so I bought it.

Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that app, click the arrow to the left of it, click the 'Report a Problem' button :
and then the 'Report a Problem' link on its line :
and select 'inadvertently purchased' as the problem and fill in the details (iTunes support should reply within, I think, about 24 hours).

HT1338 im on osx snow leopard but the lion is no longer available on app store. How can i still upgrade to lion? my computer by the way is not compatible with mountain lion. thanks

im on osx snow leopard but the lion is no longer available on app store. How can i still upgrade to lion? my computer by the way is not compatible with mountain lion. thanks

Hello royalaqua,
I do think you should ask yourself if upgrading to Lion is the right course to take.
Snow Leopard is an excellent OS and Lion has literally been frozen out after barely a year. Remember too that some of your apps may not work with Lion (those that have Rosetta, for example) so that could mean more new purchases. Plus you may need to uprate your RAM too.

IOS 7.1.2 apps will not install on the iPhone - error message "not compatible with this iPhone"???

I am using a 4s with ios 7.1.2 and recently any app I am trying to use or load will not work and I get error message the app is not compatible with my iPhone; however, the requirements in every case indicate they are compatible with 4s and ios 6 and greater. Honestly, seems like I have one problem after the other with the iPhone

Thanks, unfortunately that is another problem that is occurring, when I go to Update Software I get the message that software is up to date, with version being 7.1.2, I have tried to update through itunes, wifi, etc, and it indicates the software is up to date.

I have an app that is in my update section and it says it is not compatible with the I pad. How do I get rid of it?

I have an app that is in my update section and it says it is not compatible with the I pad. How do I get rid of it?

Never mind, I just needed to delete the app! Which I thought I had done it was hiding right in front of my face!

Apps built with Flex Builder 2 - 3 not compatible with new Flash Players and/or new browsers, FB4 OK

Similar Messages

Maybe you are looking for