Apps don't open

My newly downloaded apps (like facebook) will no longer open when selected. All other icons respond normally when selected.

Try resetting the iPhone by holding down the home button and the sleep button until the Apple logo appears and try again. If that doesn't work, delete the App and redownload it from the App store.

Similar Messages

  • Safari and some apps don't open

    Safari and some other apps do not open after i have 'reset all settings'

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Third Party Apps Don't Open

    I activated a Lumia 928 two days ago and immediately discovered that the 3rd party apps do not open.  I've done a soft and hard reset multiple times.  I've tried uninstalling and reinstalling the apps with no luck.  Any more suggestions?

    Return to your retailer
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • HT204266 my app don't open

    I try to open my app to download some game and don't open so is itunes.This is happen on my ipad 2.Please help me.

    Try closing all apps via the taskbar and see if they work when you re-open them : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • After i synch many apps don't open

    After I synch with iTunes many of my iPad apps no longer open. My laptop's iTunes has multiple login IDs, but these apps I have downloaded myself. I select the manual synch, but then don't really have the opportunity to make any manual selections.

    If the apps aren't opening or are crashing on the iPad, then if it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
    If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    In terms of syncing what shows on the iPad's Apps tab on your computer's iTunes - are the apps greyed out so that you can't tick them, or is it that nothing happens when you try to sync them ?

  • Apps don't open, even after hard reset

    this is the second time it's happened; the apps on my iphone don't open.
    the first time it happened for about a day or so then stopped.
    any suggestions? i've power cycled a few times. any idea if this is a bug of some kind? should i be concerned?
    thanks,

    See my reply to the same problem in another thread:
    http://discussions.apple.com/thread.jspa?threadID=2053821&start=15&tstart=0
    Good luck!

  • My apps don't open after updating

    HELP!! I updated my ipad before i slept and this morning, apps such as keynote, QuickOffice, and Wallpaper don't open. They appear for a split second after i tap on the icon and the screen returns to the menu of apps again. I can see them in the bottom toolbar, though... so does that mean that they're open but have some sort of malfunction?? HELP!!

    thanks! I got really ticked off and went to the nearest Mac shop and here's what we did: 1. made sure that my store account in my laptop was the same one that i'm using with the ipad. 2. tried to sync (but this failed). 3. downloaded some of the apps to the LAPTOP. 4. did a sync... AND IT WORKED!!!
    Thanks for the help, guys!

  • Hi everyone, I've had problems with some apps on my iPad. The apps don't open after update

    How do I fix apps that don't open after update?

    Try a hard reset ie hold the power and home buttons simultaneously until the Apple logo appears (ignore the red slider). Are you still using iOS 4.3.3, as in your profile? A lot of apps now need an iOS of 6 or higher for the update to download.

  • Office Web Apps don't open documents stored on Sharepoint server

    We have Sharepoint Server 2013 installed on a AD domain controller and Office Web Apps installed on a machine in the same domain and configured for internal-http WOPI zone. Discovery XML works fine. When opening a MS Office document, Office Web Apps show
    its label for a minute or two, and then display the message "Sorry, Web App can't open this document because the service is busy. Please try again later" or the message "Web App cannot open this document due to an unknown error."
    Network logs show repeated requests to Docdatahandler.ashx to which Web Apps server each time responds with some XML saying it's busy, and to Reshandler.ashx to which the server each time responds with 404 status.
    The ULC logs for Sharepoint server look like this:
    Mapping URI from 'http://sharepoint:80/_vti_bin/wopi.ashx/files/…/contents?access_token=…&access_token_ttl=1403904071991' to 'http://sharepoint/_vti_bin/wopi.ashx/files/…/contents?access_token=…&access_token_ttl=1403904071991'
    Entering monitored scope (Application Authentication Pipeline). Parent Request (GET:http://sharepoint:80/_vti_bin/wopi.ashx/files/…/contents?access_token=…&access_token_ttl=1403904071991)
    Entering monitored scope (Getting Site Subscription Id). Parent [Loopback] Getting token from STS and setting Thread Identity
    Leaving Monitored Scope (Getting Site Subscription Id). Execution time=0,0601117711447749
    Entering monitored scope (Reading token from Cache using cacheKey claim value). Parent [Loopback] Getting token from STS and setting Thread Identity
    Leaving Monitored Scope (Reading token from Cache using cacheKey claim value). Execution time=2,55094406980315
    SPApplicationAuthenticationModule Authentication finished successfully for user:0#.w|vserver\0347 and actor:
    Leaving Monitored Scope (Application Authentication Pipeline). Execution time=4,30284782797009
    OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|vserver\0347, ClaimsCount=21
    WOPI new request (GetFile), url: http://sharepoint/_vti_bin/wopi.ashx/files/…/contents?access_token=… CALLER-[machine: OfficeWebAppsServer, version: 15.0.4481.1000, CorrelationId:]
    Site=/
    WOPI Proof: Missing header [X-WOPI-ProofOld] for url: http://sharepoint/_vti_bin/wopi.ashx/files/…/contents?access_token=…  CALLER-[machine: OfficeWebAppsServer, version: 15.0.4481.1000, CorrelationId:]
    WOPI (GetFile) Proof Data: AccessToken Hash '-2012506731' [1012 bytes], URL 'HTTP://sharepoint/_VTI_BIN/WOPI.ASHX/files/…/CONTENTS?ACCESS_TOKEN=…' [1167 bytes], TimeStamp '635394648765830712' [8 bytes]  CALLER-[machine: OfficeWebAppsServer, version: 15.0.4481.1000,
    CorrelationId:]
    WOPI Signature verification attempt succeeded with public key … [0 ms]
    WOPI - InitAndValidateForFile Success [web: http://sharepoint, file: test/ы.docx]
    UserAgent not available, file operations may not be optimized.    at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb)
    Spent 0 ms to bind 20365 byte file stream
    WOPI GetFile -  Completed http://sharepoint/_vti_bin/wopi.ashx/files/…/contents?access_token=… CALLER-[byes:20365, machine: OfficeWebAppsServer, version: 15.0.4481.1000, CorrelationId:]
    WOPI PerfTrace: <o n="PreWopi" d="6" /><o n="ParseGetFile" d="0" /><o n="InitAndValidateForFile" d="8" /><o n="OpenBinaryStream" d="2" /><o n="WriteResponseStream"
    d="17" />
    WOPI new request End [Elapsed Time WOPI (ms): 35] [Elapsed Time HttpContext (ms): 42]
    Leaving Monitored Scope (Request (GET:http://sharepoint:80/_vti_bin/wopi.ashx/files/…/contents?access_token=… Execution time=42,173001152361
    Leaving Monitored Scope (Request (GET:http://sharepoint/_vti_bin/wopi.ashx/files/…/contents?access_token=… Execution time=44,9670172749155
    And the ULC logs for Office Web Apps server look like this:
    WAC Server HttpModule: Beginning request at target [/wv/wordviewerframe.aspx?ui=ru%2DRU&rs=ru%2DRU&WOPISrc=http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F…&sc=http%3A%2F%2Fsharepoint%2Ftest%2FForms%2FAllItems%2Easpx] in session [044adcdc-0567-4727-8d82-2adb93efb266]
    ReadStructuredDataFromXml: [C:\Programs\OfficeWebApps\AgentManager\LanguageMapping.xml]
    Registering OnPreProcessTrace handler
    WOPI Proof Keys - WS Farm State has no Old key (this is expected if recently installed)
    WOPI Proof Keys - WS Farm State has no Old key (this is expected if recently installed)
    WOPI Proof: Using Current private key (to sign) that matches Current public key …
    Updated WOPI Proof Keys [Discovery] - Old Key (Public): 
    Updated WOPI Proof Keys [Discovery]- Current Key (Public): …
    WOPI CheckFileInfo: Start [url:http://sharepoint/_vti_bin/wopi.ashx/files/…]
    URL generated for WOPI CheckFile Request: http://sharepoint/_vti_bin/wopi.ashx/files/…?access_token=REDACTED_1040&access_token_ttl=1403904071991
    WOPI Proof Data: AccessToken Hash '-2012506731' [1012 bytes], URL 'HTTP://sharepoint/_VTI_BIN/WOPI.ASHX/files/…?ACCESS_TOKEN=REDACTED_1040&ACCESS_TOKEN_TTL=1403904071991' [1158 bytes], TimeStamp '635394648734348738' [8 bytes]
    WOPI Proof: Using Current private key (to sign) that matches Current public key  …
    WOPI Proof - Successfully signed the data with the Current private key [17 ms]
    WOPI Proof Keys - WS Farm State has no Old key (this is expected if recently installed)
    Cannot create WOPI Proof Token - could not find valid Old proof key data
    HttpRequestAsync (WOPICheckFile,WACSERVER) Starting [mode: GET, url: http://sharepoint/_vti_bin/wopi.ashx/files/…?access_token=REDACTED_1040&access_token_ttl=1403904071991]
    HttpRequestAsync (WOPICheckFile,WACSERVER) End Called
    HttpRequestAsync::GetResponseCallback - ContentLength:2130
    HttpRequestAsync::FProcessReadReturn - cbRead:2130
    HttpRequestAsync::FProcessReadReturn - cbRead:0
    HttpRequestAsync (WOPICheckFile,WACSERVER) Setting Completion [Time in ms: 116, Bytes Read: 2130]
    HttpRequestAsync (WOPICheckFile,WACSERVER) SetCompletion Track start | setting trackers | WebRequest.Create() | Create() returned | _req.ContentLength 0 | setting request headers | setting user agent | setting keep alive | setting timeout callback | Start calling
    StartResponseProcessing | StartResponseProcessing._req.BeginGetResponse() | BeginGetResponse() returned | StartResponseProcessing RETURNS | Start RETURNS | End.AsyncWaitHandle.WaitOne() | GetResponseCallback isSync:False | _req.EndGetResponse() | EndGetResponse()
    returned | RecordResponse OK | _response.GetResponseStream() | _response.GetResponseStream() RETURNED | DoReadLoopFinished | _getStream.BeginRead() | BeginRead() -> sync:False | DoReadLoopFinished RETURNS False | GetResponseCallback DoReadLoopFinished ->
    FALSE | GetResponseCallback RETURNS | ReadCallback.FProcessReadReturn() | FProcessReadReturn._getStream.EndRead() | EndRead() -> 2130 | FProcessReadReturn._responseStream.Write() | FProcessReadReturn RETURNS True | FProcessReadReturn() -> TRUE | ReadCallback.DoReadLoopFinished()
    | DoReadLoopFinished | _getStream.BeginRead() | ReadCallback.sync returning | BeginRead() -> sync:True | DoReadLoopFinished.FProcessReadReturn() | FProcessReadReturn._getStream.EndRead() | EndRead() -> 0 | FProcessReadReturn._responseStream.Write() |
    FProcessReadReturn RETURNS False | FProcessReadReturn() -> false | DoReadLoopFinished RETURNS true | DoReadLoopFinished() -> TRUE | SetCompletion False | WaitOne() returned | 
    WOPI Http Request Completed [host machine name:sharepoint, version:15.0.4420.1017, host correlation:044adcdc-0567-4727-8d82-2adb93efb266]
    Returned from WOPI CheckFileInfo, [host:WACSERVER, user:2b80a4cac8ac4ba9aaeda4b2d11c1c2e]
    CacheKey based on host-provided hash: 2f8b6f928ff724d93c1151fb2430b9d837f1068c30654cc5b72131df0796a8de
    RoamingAppsAllowList config is empty. Roaming is disabled.
    Librarian.BeginGetItem(http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F…, Png, docdata.xml)
    ViewStore.ReadMainCache(http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F…, Png, docdata.xml)
    FEMemoryCache.FReadFromCacheLine: key 2f8b6f928ff724d93c1151fb2430b9d837f1068c30654cc5b72131df0796a8de_00000000-0000-0000-0000-000000000602, length 10240, offset 0
    GlobalListLoadBalancer: Refreshing list for service DiskCache. Reason: null hasher
    GlobalListLoadBalancer: Creating consistent hasher for service DiskCache with 50 nodes.
    GlobalListLoadBalancer: Next refresh time: 06/27/2014 11:22:14
    GlobalListLoadBalancer: Finished refreshing list. [Agent: DiskCache; Time WriteLock held (ms): 15]
    Creating channel to DiskCache: http://OfficeWebAppsServer:809/diskcache/DiskCache.svc
    MachineTransfer [SourceMachine:OfficeWebAppsServer, SourceMachineVersion:15.0.4481.1000, TargetMachine:OfficeWebAppsServer, TargetMachineVersion:15.0.4481.1508, Method:DiskCacheService.ReadCacheData]
    ReadCacheData: [2F8B6F928FF724D93C1151FB2430B9D837F1068C30654CC5B72131DF0796A8DE00000000000000000000000000000602, 00000000-0000-0000-0000-000000000602, 1048576, 0, OfficeWebAppsServer]
    WACServer HttpModule: Completed request with status code [200]
    WAC Server HttpModule: Beginning request at target [/wv/ResReader.ashx?n=p1.img&WOPIsrc=http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F…] in session […]
    WAC Server HttpModule: Beginning request at target [/wv/docdatahandler.ashx?WOPIsrc=http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F…]
    DiskCacheReader: TimeoutException [Machine: http://OfficeWebAppsServer:809/diskcache/DiskCache.svc, Exception:System.TimeoutException: The HTTP request to "http://OfficeWebAppsServer:809/diskcache/DiskCache.svc" has exceeded the allotted timeout of
    00:00:01.9990000. The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The request was aborted: The request was canceled.     at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
        at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult result)     --- End of inner exception stack trace ---    Server stack trace:      at
    System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)     at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)     at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[]
    outs, IAsyncResult result)     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeEndService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage
    message)    Exception rethrown at [0]:      at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)     at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
    msgData, Int32 type)     at Microsoft.Office.Web.DiskCache.IDiskCacheAsync.EndReadCacheData(IAsyncResult result)     at Microsoft.Office.Web.Apps.Common.DiskCacheReaderAsync.ReadCallBack(IAsyncResult asyncResult)]
    ViewStore.SetCompleted(http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F…, Png, docdata.xml) - status = DocumentOutputNotFound
    GlobalListLoadBalancer: Refreshing list for service WordConversionService. Reason: null hasher
    GlobalListLoadBalancer: Creating consistent hasher for service WordConversionService with 50 nodes.
    GlobalListLoadBalancer: Next refresh time: 06/27/2014 11:22:16
    GlobalListLoadBalancer: Finished refreshing list. [Agent: WordConversionService; Time WriteLock held (ms): 3]
    RequestDispatcher: dispatching request for document http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F… to http://OfficeWebAppsServer:809/wvc/Conversion.svc [attempts remaining: 12].
    MachineTransfer [SourceMachine:OfficeWebAppsServer, SourceMachineVersion:15.0.4481.1508, TargetMachine:OfficeWebAppsServer, TargetMachineVersion:15.0.4481.1508, Method:ConvertingService.ProcessRequest]
    Request received for document http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F…, format: _v00000000-0000-0000-0000-000000000602, request id …, queued requests: 0, working requests: 0
    Launching async job to add workers.
    AppManager.BeginProcessRequest adding request to queue
    DownloadManager: Download requested for document: http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F…
    MemoryDownloadCache::TryGetItem - Key:…
    DownloadManager::BeginDownloadFile - Not cached. Adding to download queue
    DownloadEntry::TryAddRequest - Adding request to DownloadEntry for BaseDoc:http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F… PendingRequestCount:0
    DownloadManager::BeginDownloadFile - added DownloadRequest to DownloadEntry
    DownloadManager: Starting download for document http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F….
    RequestDispatcher: response received for document http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F… from http://OfficeWebAppsServer:809/wvc/Conversion.svc.
    URL generated for WOPI GetFile Request: http://sharepoint/_vti_bin/wopi.ashx/files/…/contents?access_token=REDACTED_1040&access_token_ttl=1403904071991
    Conversion response received: InProgress
    WOPI Proof Data: AccessToken Hash '-2012506731' [1012 bytes], URL 'HTTP://sharepoint/_VTI_BIN/WOPI.ASHX/FILES/…/CONTENTS?ACCESS_TOKEN=REDACTED_1040&ACCESS_TOKEN_TTL=1403904071991' [1167 bytes], TimeStamp '635394648765830712' [8 bytes]
    Librarian.OnConversionResponseReceived(http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F…, Png, docdata.xml) - Response=InProgress, Data=NO
    Librarian.SetCompleted(http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F…, Png, docdata.xml) - status = InProgress
    Libriarian.OnItemRetrieved: InProgress
    ReadStructuredDataFromXml: [C:\Programs\OfficeWebApps\AgentManager\LanguageMapping.xml]
    WOPI Proof: Using Current private key (to sign) that matches Current public key…
    WOPI Proof - Successfully signed the data with the Current private key [71 ms]
    WOPI Proof Keys - WS Farm State has no Old key (this is expected if recently installed)
    Cannot create WOPI Proof Token - could not find valid Old proof key data
    HttpRequestAsync (WOPIGetFile,WACSERVER) Starting [mode: GET, url: http://sharepoint/_vti_bin/wopi.ashx/files/…]
    HttpRequestAsync::GetResponseCallback - ContentLength:20365
    HttpRequestAsync::FProcessReadReturn - cbRead:20365
    HttpRequestAsync::FProcessReadReturn - cbRead:0
    HttpRequestAsync (WOPIGetFile,WACSERVER) Setting Completion [Time in ms: 207, Bytes Read: 20365]
    HttpRequestAsync (WOPIGetFile,WACSERVER) End Called
    WOPI Http Request Completed [host machine name:sharepoint, version:15.0.4420.1017, host correlation:044adcdc-0567-4727-8d82-2adb93efb266]
    WopiDocument::EndRead - using Content-Length for expectedSize
    WopiDocument::EndRead - Content-Length:20365 BytesRead:20365
    SHA256Hash: …, Extension: .docx, FileRep: http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F…
    DownloadManager: Download SUCCESS for document http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F…; Time spent: 397ms; Bytes Read: 20365, FileSource: WACSERVER ExpectedBytes: 20365
    DownloadEntry::CompletePendingRequestsFromSingleStream - BaseDoc:http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F… TotalRequests:1
    DownloadEntry::CompletePendingRequestsFromSingleStream - completing 1 DownloadRequests
    MemoryDownloadCache::TryAddItem - Key:2f8b6f928ff724d93c1151fb2430b9d837f1068c30654cc5b72131df0796a8de
    MemoryDownloadCache::TryAddItem - TryAdd Key:2f8b6f928ff724d93c1151fb2430b9d837f1068c30654cc5b72131df0796a8de Success:True
    DownloadManager::OnFileDownloaded - Added BaseDoc:http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F… to downloadcache fAdded:True
    DownloadManager::OnFileDownloaded - Tried to remove http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F… fRemoved:True
    DownloadEntry::CompletePendingRequestsFromSingleStream - BaseDoc:http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F… TotalRequests:0
    DownloadEntry::CompletePendingRequestsFromSingleStream - completing 0 DownloadRequests
    HttpRequestAsync (WOPIGetFile,WACSERVER) SetCompletion Track start | setting trackers | WebRequest.Create() | Create() returned | _req.ContentLength 0 | setting request headers | setting user agent | setting keep alive | setting timeout callback | Start calling
    StartResponseProcessing | StartResponseProcessing._req.BeginGetResponse() | BeginGetResponse() returned | StartResponseProcessing RETURNS | Start RETURNS | GetResponseCallback isSync:False | _req.EndGetResponse() | EndGetResponse() returned | RecordResponse
    OK | _response.GetResponseStream() | _response.GetResponseStream() RETURNED | DoReadLoopFinished | _getStream.BeginRead() | BeginRead() -> sync:False | DoReadLoopFinished RETURNS False | GetResponseCallback DoReadLoopFinished -> FALSE | GetResponseCallback
    RETURNS | ReadCallback.FProcessReadReturn() | FProcessReadReturn._getStream.EndRead() | EndRead() -> 20365 | FProcessReadReturn._responseStream.Write() | FProcessReadReturn RETURNS True | FProcessReadReturn() -> TRUE | ReadCallback.DoReadLoopFinished()
    | DoReadLoopFinished | _getStream.BeginRead() | ReadCallback.sync returning | BeginRead() -> sync:True | DoReadLoopFinished.FProcessReadReturn() | FProcessReadReturn._getStream.EndRead() | EndRead() -> 0 | FProcessReadReturn._responseStream.Write() |
    FProcessReadReturn RETURNS False | FProcessReadReturn() -> false | DoReadLoopFinished RETURNS true | DoReadLoopFinished() -> TRUE | SetCompletion False | 
    WAC Server HttpModule: Beginning request at target [/wv/ResReader.ashx?n=p1.img&WOPIsrc=http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F…] in session […]
    ReadCacheData Response: NoDataFound
    WAC Server HttpModule: Beginning request at target [/wv/docdatahandler.ashx?WOPIsrc=http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F…]
    WAC Server HttpModule: Beginning request at target [/wv/ResReader.ashx?n=p1.img&WOPIsrc=http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F…] in session […]
    WAC Server HttpModule: Beginning request at target [/wv/docdatahandler.ashx?WOPIsrc=http%3A%2F%2Fsharepoint%2F%5Fvti%5Fbin%2Fwopi%2Eashx%2Ffiles%2F…] in session […]
    What went wrong, any suggestions?

    HI,
    Have you checked that by using normal user account or system account? Check by using normal user account,if error is still there then Office Web App server may not be configured properly,plz check the link for one of the causes of the issue
    https://sharepointdojo.wordpress.com/tag/word-web-app-cant-open-this-document-because-the-service-is-busy-please-try-again-later/
    Please Mark it as answer if this reply helps you in resolving the issue,It will help other users facing similar problem

  • My Adobe Creative Cloud apps don't open. What to do?

    I want to use Adobe Indesign.
    So I bought a subscription for the Adobe Creative Cloud.
    I managed to download the Adobe Creative Cloud - program. And I can open the application.
    But when I want to open an App, the little 'opening up' wheel continues to run. The app does not open. What to do?
    I have a MacBook Pro. Memory: total 4 Gb. Free memory: 1,6 Gb.
    OSx-version: 10.9.5.
    tnx. Ellen

    I found the answer at the Adobe-site:  http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems. html

  • I updated my Ipod Touch 2G to ios 5 but since then my apps don't open anymore. It says I need ios 4.0. what can I do?

    I have updated my ipod touch 2G to ios 5 but my apps won't open anymore. When I try, i have a message saying that I need ios 4.0.
    Before this update, my apps worked fine. How can I do to make them work again?

    - Based on the release date specified here, it appears to be a 2G iPod:
    'http://translate.google.com/translate?hl=en&sl=ja&u=http://www.amazon.co.jp/Appl e-iPod-touch-32GB-MB376J/dp/B000UKMVM0&ei=yiMKT5aHFcL50gHN_aGwAg&sa=X&oi=transla te&ct=result&resnum=1&ved=0CCMQ7gEwAA&prev=/search%3Fq%3DMB376J%26hl%3Den%26clie nt%3Dsafari%26rls%3Den%26prmd%3Dimvns
    - WHat do you get wehn yu enter the SN here:
    Apple - Support - Check Your Service and Support Coverage
    - Are you sure you updated the iPod?  If you go to Settings>General>About>Version what is listed?
    - If you have a 2G with iOS 5 then you would have had to jailbreak the iPOd and that can cause problems

  • Non-Apple apps don't open after iOS5 upgrade (with fix)

    Hi, I thought I'd add this thread in case it's useful to someone else with the same problem.
    I had a iPhone 4 on latest 4.3.5 and upgraded via iTunes to iOS5 this morning.
    None of my non-Apple apps would open, they'd just open and close instantly. So Facebook, Tweetdeck, Things, BBC News etc wouldn't work but ones like Reminders, App Store etc would.
    I did a restore and restore from a backup and this didn't fix the problem.
    I removed the apps from memory (home double-click) and rebooted the phone and still the non-Apple apps wouldn't load.
    So finally I thought I'd reinstall the apps from scratch, deleted Facebook and grabbed it again from the App Store.
    This worked and fired up as normal, tried the others non-Apple apps and they all work too!
    No idea why, not sure if it's specifically the Facebook app or if I could have done that too any of them.
    All sorted now and iOS5 is lovely

    Confirmed!
    I had the same problem, deleted a weather app (so no valuable data attached to it) re-installed it and all the other apps seem to work again.
    Which single app you delete & reload doesn't seem to matter, I think you just need to re-establish the connection between the device and your App Store account in order to trigger some kind of background authorization.
    It might also work by deleting nothing and just grabbing a new, free app.

  • My apps don't open what can i do?

    hello people,
    my apps directly close when i try to open them....
    what can i do? please help me..... i already checked the website and used the tips from apple but the don't work....
    so please help me!
    Greetz
    me

    So you tried everthing here:
    iOS: Troubleshooting applications purchased from the App Store
    Try a restore, first from backup and if problem persists restore to factory defaults/new iPod.

  • HT4972 After Updating-Apps Don't Open

    I updated my phone last night and everything was fine, this morning after using it for an hour or so, all of my downloaded apps stopped opening. The only information I can find keeps referring to jailbreaking, but I don't even know what that is. A simple step by step explanation of how to fix it would be immensely appreciated.

    Try downloading and installing any free app from the App Store. That usually resets things as they should be.

  • Metro Apps don't open on Local and Domain account. Works on Microsoft Live account. Windows 8.1 Pro

    This is Happening on Three different computers.
    All computers are Windows 8.1 Pro. This is a clean install.
    When the computer is initially setup, I first sign on with my Windows Live ID and everything seems to work fine there.
    After Joining the computer to the domain, none of the Metro UI apps will open, they open briefly and close.
    Added a local account and found that it also does not work there.
    Steps I have tried to resolve this:
    Modified owner and permissions on registry Key: HKCR\AppID\{3EB3C877-1F16-487C-9050-104DBCD66683}
    Changed owner to Local Administrator and gave full controll to Local Admin and Domain user account.
    Ran DCOMCNFG and under Computers ->My Computer-> WinInetCacheServer Properties I went to the IDENTITY TAB and changed
    it to the Interactive User.
    That did not help.
    Ran this command: "powershell
    -ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\WinStore\AppxManifest.xml" from elevated command prompt and also did not help.
    I tried downloading the App troubleshooter but it would not run.
    I also tried "wsreset.exe" and got an error saying: " Windows cannot find 'ms-windows-storePurgeCaches'. Make sure you typed the name
    correctly, and then try again"
    When Trying to open the app and it fails I get this error under Applications in Event Viewer:
    "Activation of app winstore_cw5n1h2txyewy!Windows.Store failed with error: This app does not support the contract specified or is not installed. See the Microsoft-Windows-TWinUI/Operational log for additional information."
    Anyone know how to resolve this.
    We are looking to implement Windows 8.1 Pro to our clients pretty soon and need to get this resolved asap.
    Thanks

    This is Happening on Three different computers.
    All computers are Windows 8.1 Pro. This is a clean install.
    When the computer is initially setup, I first sign on with my Windows Live ID and everything seems to work fine there.
    After Joining the computer to the domain, none of the Metro UI apps will open, they open briefly and close.
    Hi,
    Did you mean that this problem only after you join the computer to the domain? if so, you may need to check whether you domain controller would install any program to your system. or you can contact domain adminstrator for further assistance.
    In addition, run the following in a Command Window (CMD) to re-register the Store App:
    powershell -ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\WinStore\AppxManifest.XML
    Roger Lu
    TechNet Community Support

  • Bought Apps Don't Open

    Unfortunately, I just had my iPhone looked at today at the Genius Bar because the battery life was being erratic.
    I haven't been using my phone for most of the day since then (when it did it worked fine), but just about a half hour ago I tried to open the facebook application and the blank, unloaded screen opened up and immediately went back to the home page.
    I looked at my other apps and found that this same thing, where the blank, unloaded screen opens up and then goes right back to home, happens with all of the apps that I've bought, but not ones I've gotten directly from Apple.
    Has this been happening to anyone else?
    Is it possible to fix?
    What helps even less is that I'm leaving on a month long trip in two days and have no free time to take myself to another Apple store to get this figured out before I leave.
    Thanks for any help!

    I had the same isuue on my iPhone 3G.
    I've installed iPhone OS 3.0, everything worked fine for several days, included bought apps and then after a crash, there was no way to launch bought apps (the same way the others experienced it).
    I was away from my computer so I wasn't able to try anything on it (sync, restore, etc...).
    Reboot iPhone several times, reset, hard reboot, log off/log in appstore account: NONE WORKED
    Finally, I went into App Store on iPhone, then in updates, I've updates some app I have to update and... YES, it fixed the problem for me.
    I was able to launch my bought apps again. Everything worked fine again and I recovered all my apps with all my prefs, scores, etc...
    Thanks to Frodo Fraggins post !!!

Maybe you are looking for