Apps don't work after being installed

I loaded several apps Saturday and on Sunday apps don't work.  Afraid to "reset" phone.  any ideas?

See here for...
Troubleshooting applications purchased from the App Store
also, you will not lose any data or setting with a Reset or a Restart
Restart / Reset
http://support.apple.com/kb/ht1430

Similar Messages

  • My apps don't work after synching music files from my PC

    My apps don't work after synching music files from my PC through Itunes....though all the apps are shown in the Apps window in Itunes (The Apps match the iTunes account on the iPhone).....
    Disconnecting after the sync and After downloading any app from Appstore through Wi-Fi all my apps start working.....
    Please Help.....

    What happend is your phone forgot it was authorized to work with items associated with your apple id. If it happens again, download any free app to prompt the sign in, once you install the free app the others should work.

  • All Mac apps don't work after cloning on new hd.

    All Mac apps don't work after cloning on new hd.
    I used CCC to clone 10.6.8 then onto new drive. Everything works BUT all Mac apps.
    Error: You can't open the app(s) because it is not supported on this type of Mac. (On MacBook 2011)
    Thanks for your help.

    All good. Just drag and dropped each application and they worked until I did a restart. Then repaired permissions and everything works.

  • IPhone 3GS apps don't work after 4.3 upgrade

    Some apps like mail, safari, app store, ipod don't work after upgrading to iOS 4.3. itues is up to date and have never had issues before. tried to downgrade to 4.2 but was unable to. Help!

    I have the same issue, half the apps no longer work, just stays in 'updating' mode. I've tried uninstalling some but now the app store is freezing. THe ones I am able to reinstall give me error message saying I'm not logging in correctly (I am). I'm guessing some apps versions aren't compatible with the new software but a few I was able to use after the software update and now I can't

  • TS1702 Certain apps will not work after ios6 install.

    Certain apps will not work after ios6 update. Tiger Woods golf will run for about 5 seconds and stop. Have uninstalled/re-installed to no avail.

    My husband had the same problem with some apps after I updated his iPad 2 to iOS 5.  I checked the app store and there were updates for the apps to support the new software.  After updating, all apps work just fine.

  • Several apps don't work after I upgraded OS today

    A few of my apps no longer work after the upgrade. They just give a blank screen. Who should I be reporting this issue to?
    Thanks

    Ty TenNights. Also, opened an email through bridge (gmail) with attachments (jpg files) and tapped them to download. They downloaded and it says tap to open. I tap and my pictures folder opens up, but the jpg's aren't there. Now I can't see the files

  • Apps don't work after installing ios 6

    after I installed Ios 6 on my ipod touch 4th two wks ago none of my apps work correctly and I can't even connect to app store or itunes. I get an error "cannot connect to itunes".. also can't connect to safari. I sent my ipod over to apple but because i have physical damage they would not repair. I had no problems with it until i installed ios 6. i have restore back to new and still same issues.  thanks for any help! 

    If you still have the problem after restoring to factory settings/new iPod that indicates a hardware problem.

  • Start and Start apps don't work after System Restore

    Hey guys, I tried to install Andy (Android emulator) on my PC today and I had to reboot after the setup was complete. This time when booting up, my computer froze before login screen. I've restarted the computer several times, but no login screen.
    So I used System Restore to restore my system (refresh point is 2 days old) and voila, everything works like it should...
    Except for Start menu, Cortana & search bar and notifications. Restarting explorer.exe didn't fix the problem. Even Start menu apps like Music or Store don't work... Only way to open the Settings app is to click on my network connection icon. Help please!
    I'm using build 9926

    ..............So I used System Restore to restore my system (refresh point is 2 days old)...............
    It is possible that you are missing the updates that were installed in that 2 days. You rolled back 2 days, now you need to reinstall those updates.
    If you cannot use Start Menu, please follow this instruction given by Insider Hub......
    Checking for updates may fix this problem. To check for updates without the Start menu, do the following:
    Select the Internet Explorer icon.
    Type http://update.microsoft.com into the address bar and select
    Enter.
    If you are prompted to run a control, click
    Yes or Confirm
    This should bring up the Check for updates window. Install updates.
    If no update is available, or the available updates don’t fix the issue, restart the device–this should make the Start menu appear. To reboot without using the Start menu:
    Hold down the Windows key and select L to lock the device. Swipe up or select
    Enter to open the sign in screen. Select the
    Power icon on the log in screen to restart the computer.            
    OR
    Hold down the Windows key and select R to bring up a command prompt. In the prompt, type
    shutdown –r to restart
    Good luck.

  • All apps don't work after backup restore

    My iphone 4 got stolen last week and so I bought a new iphone 4.
    Installed a bunch of apps when I got it. Then I plugged it into my laptop and itunes asked if I wanted to restore from back up (of my original iphone 4) or activate as new phone.
    I clicked restore from back up original iphone 4. Then after it loaded & did everything, I unplugged my iphone and none of my apps or email work anymore.
    When I click on any of my apps, it opens for 1 sec and then closes, returning back to the home page.
    For email I tried to go on 'add new account' and re-enter details, it does not work. Nothing happens when I enter the details. It doesn't register my new account.
    Please help?? What should I do?

    ..............So I used System Restore to restore my system (refresh point is 2 days old)...............
    It is possible that you are missing the updates that were installed in that 2 days. You rolled back 2 days, now you need to reinstall those updates.
    If you cannot use Start Menu, please follow this instruction given by Insider Hub......
    Checking for updates may fix this problem. To check for updates without the Start menu, do the following:
    Select the Internet Explorer icon.
    Type http://update.microsoft.com into the address bar and select
    Enter.
    If you are prompted to run a control, click
    Yes or Confirm
    This should bring up the Check for updates window. Install updates.
    If no update is available, or the available updates don’t fix the issue, restart the device–this should make the Start menu appear. To reboot without using the Start menu:
    Hold down the Windows key and select L to lock the device. Swipe up or select
    Enter to open the sign in screen. Select the
    Power icon on the log in screen to restart the computer.            
    OR
    Hold down the Windows key and select R to bring up a command prompt. In the prompt, type
    shutdown –r to restart
    Good luck.

  • Few apps don't work after Anna update

    I got a new N8 recently (my last one was stolen, insurance covered most of it though) but with the same product code and everything. Of corse, it didn't come with Anna pre-installed (it actually came with PR1.0 and I remembered how horrible the phone used to be). However, I updated to Anna with Ovi Suite without problems but I had a few weird experiences with the additional 1/2 and 2/2, for instance, when the phone found these updates it said that they were about 30-40 kB which obviously is wrong, and it took a while to install them. Then later I got them both again but this time they had the right size. 1/2 installed without problems but I had to try with 2/2 several times before it (")worked(").
    Anyways, some apps like fMobi (pay-version) and the swedish app for public transportation don't work anymore. Don't know if they did on my last N8 after update. The additional updates were supposed to fix some non-working apps but it certainly isn't that way with my N8...advice please?

    Just to point out that the fMobi stopped working in my N8 too after the update.
    Uninstalled and reinstalled no end.
    But I found that if you go to the fMobi facebook page, he say's that wiith the new controls put in by facebook, it has somehow messed up the App. Check his page out and see what he says.
    Jurassic Park, Sam Neill to Dickie Attenborough " Mr. Hammond, the phones are working !"
    N8-00 Tesco UK 059C951, Lumia 920

  • Apps don't work after update to 5.0.1

    after i update my ipod 4th gen from 4.3.5 to 5.0.1 the apps like angry birds don't work.
    it likes the app start by flash only one and then comes nothing. the screen show the start display.

    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Download/install a new app. Any app will do.
    - iOS: Troubleshooting applications purchased from the App Store

  • Snow leopard app store not working after clean install. Anyone else having this problem?

    The App store has stopped working after a clean install of OS X Snow Leopard. The get/install buttons go grey after I've clicked on them then nothing....
    It doesn't hang, all the navigation buttons work fine, and I can log into iTunes fine. Just can't buy anything...

    Try resetting the App Store and Clearing Cookies.
    Reset       Learned from Old Toad

  • Apps don't work after installing iOS5

    I just upgraded to iOs5 on my iPad 2. Since then several apps cannot be opened: iBooks, Skype, Quick Office, Dropbox, Agenda and Simplenote.
    Any suggestions as to what can be done about it?

    If you still have the problem after restoring to factory settings/new iPod that indicates a hardware problem.

  • Apps no longer working after Mavericks install yesterday

    Hello all and thank you in advance for any help.
    I installed Mavericks yesterday and since the install my iMac has been running horribly. I can not get applications to work (Preview, App Store, iPhoto, ect). As soon as I click on them they quit unexpectedly. Safari still works, Photoshop still works, and iTunes still works. If I am in Finder and click on an image, a preview will not show up but the beach ball will just spin and after 10 minutes I will have to relaunch Finder since it is not responding. 
    I deleted all of the .plist files. I have run Disk Utility three times. I reinstalled Mavericks 4 times and none of it is helping.
    The system is a 27" mid 2011 iMac. Memory is 12 GB 1333 MHz DDR3. I have 200 GB of free space (out of 999.35 GB).
    I am now at a loss as to what else I can try.
    Any input would be greatly appreciated.

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password dialog will open. You’re not going to reset a password.
    In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
    Select your username from the menu labeled Select the user account if it's not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Some Apps don't work after an upgrade IOS to 6.1.1

    Description of the problem with my iPhone 4 after an upgrade from iOS 5.1 to 6.1.1:
    Some Apps try to start but stopped immidiatly.
    The issue for my case:
    Try to find your App trough the App Store on your iPhone.
            The status of this App should be open. (but when you try to open it, it won't !!!)
    Use the main button to go back to your App and delete it.
    Go back to Apps Store and reinstall your App.
    Check the progress of the installation.
    When the install is done open your App again and it should be working again.
    Best regards,
    Schotel

    Try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.

Maybe you are looking for

  • Control Delivery's Save - if condition is not meat.

    Dear all, I need help at the following. I added code at USEREXIT_SAVE_DOCUMENT_PREPARE in order to control if the delivery is ready to be saved or not. After the MESSAGE .... 'E'...... I get another message Risk of posting several mat.documents for o

  • How do you turn off Auto Update when you sync your ipod??

    I need to turn this off because I just got a SLVR with iTunes and I dont want it to put all my music on my SLVR because it would fill up with the songs I dont want to put on it..

  • Trouble with a If conditional using string methods.

    Hello Everyone, I am having trouble with an If statement. I want to compare a string variable to two values using the or operator. I have found the || may not be applied to string.equals. Would neone happen to have a different method? Code below: che

  • Error Message after Installing 9.2 Update

    I installed the 9.2 update and it worked fine. When I tried again today I just kept getting two error messages 1. Really long message about CoreGraphics.dll 2. Error 7 (Windows error 193) I tried to fix, uninstall and reinstall itunes but no change.

  • Why is my Mac using so much RAM with OSX 10.9?

    Hey, everyone! I have a mid-2010 Mac Pro with 6 GB's of RAM. Before I upgraded to Mavericks, I would have about 3-4 gigs FREE. Now, I only have one or less. To give you an idea of what I run on my mac: ProTools 10, Adobe Premiere CS6, FCP X, Photosho