Apps don't work after update to 5.0.1

after i update my ipod 4th gen from 4.3.5 to 5.0.1 the apps like angry birds don't work.
it likes the app start by flash only one and then comes nothing. the screen show the start display.

- Reset the iPod. Nothing will be lost
Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Download/install a new app. Any app will do.
- iOS: Troubleshooting applications purchased from the App Store

Similar Messages

  • My apps don't work/after update/4th/ did up dates yesterday, now none of my apps are working. When click on them my screen blicks

    When I did updates last night about videos. Now non of my apps are working. When I click on them the screen blicks on and off. Everything else see fine.

    - Have you tried to reset yur iPod?
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    -Next would be to restore the iPod from backup via iTunes
    - Last would be to restore you iPod to factory defaults/new iPod via iTunes since there may be corruption that is in your backup.

  • Apps don't work after update.

    Anybody else have this problem?  I have first gen iPad and none of my apps will open.
    Any suggestions much appreciated.

    Don't give up so easily. You can try all of this really basic stuff before you call Apple. It may not work, but I will not charge you $29.00 for the support call either!
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Rey qutting all of the apps in the task bar if there are apps in there. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Also try syncing with iTunes again - the old way - connect your iPad to your computer - give that a try.

  • All Mac apps don't work after cloning on new hd.

    All Mac apps don't work after cloning on new hd.
    I used CCC to clone 10.6.8 then onto new drive. Everything works BUT all Mac apps.
    Error: You can't open the app(s) because it is not supported on this type of Mac. (On MacBook 2011)
    Thanks for your help.

    All good. Just drag and dropped each application and they worked until I did a restart. Then repaired permissions and everything works.

  • My apps don't work after synching music files from my PC

    My apps don't work after synching music files from my PC through Itunes....though all the apps are shown in the Apps window in Itunes (The Apps match the iTunes account on the iPhone).....
    Disconnecting after the sync and After downloading any app from Appstore through Wi-Fi all my apps start working.....
    Please Help.....

    What happend is your phone forgot it was authorized to work with items associated with your apple id. If it happens again, download any free app to prompt the sign in, once you install the free app the others should work.

  • Webmail in Safari don't work after updating to iOS6.

    Webmail in Safari don't work after updating to iOS6.  Logging on to office webmail account are redirected.  Webmail works with Google Chrome, but it doesn't sove the issue with Safari.  Any suggestions on how to configure Safari?

    Try this
    I was having this problem, seem to happen when waking computer, once finally connected network works great. 
    You need to edit your network preferences to order the network selection list.  Goto this support page  Using network locations (Mac OS X v10.6 and later) and edit your selection list. 
    I also created a "HOME" location and deleted all networks except wifi.  Put MB to sleep woke and safari worked great.  Still I re-ordered the networks under Automatic putting wifi at top, sequence is from top down.  Don't forget to click Apply.  Have fun

  • Could someone explain to me why Flash virtual tours don't work after update to Flash Player 10.1?

    Hello there,
    Could someone explain to me why Flash virtual tours don't work after update to Flash Player 10.1?
    Thanks!

    www.privium.nl
    klick the icon image 'virtual tour' upper right corner.
    This works on my other pc, on which I did not update to 10.1 ...
    (I produced this virtual tour; it is stored on the FTP server of the service provider I use for this)
    Awaiting your reply,
    Regards,

  • Apps don't disappear after updating

    My updated apps don't disappear after updating concludes on my iPad.  I noticed that this only started happening after installation of iOS7.

    Hi Aleagle,
    Just so you know, the reason this was changed for iOS 7 was in conjunction with the Automatic Update feature that was also introduced with iOS 7. If updates to apps are being done automatically, then you would have no way to know what apps were updated or when. This new list in the Updates tab was added to provide the update history information.
    Cheers,
    GB

  • IPhone 3GS apps don't work after 4.3 upgrade

    Some apps like mail, safari, app store, ipod don't work after upgrading to iOS 4.3. itues is up to date and have never had issues before. tried to downgrade to 4.2 but was unable to. Help!

    I have the same issue, half the apps no longer work, just stays in 'updating' mode. I've tried uninstalling some but now the app store is freezing. THe ones I am able to reinstall give me error message saying I'm not logging in correctly (I am). I'm guessing some apps versions aren't compatible with the new software but a few I was able to use after the software update and now I can't

  • Hi everyone, I've had problems with some apps on my iPad. The apps don't open after update

    How do I fix apps that don't open after update?

    Try a hard reset ie hold the power and home buttons simultaneously until the Apple logo appears (ignore the red slider). Are you still using iOS 4.3.3, as in your profile? A lot of apps now need an iOS of 6 or higher for the update to download.

  • Several apps don't work after I upgraded OS today

    A few of my apps no longer work after the upgrade. They just give a blank screen. Who should I be reporting this issue to?
    Thanks

    Ty TenNights. Also, opened an email through bridge (gmail) with attachments (jpg files) and tapped them to download. They downloaded and it says tap to open. I tap and my pictures folder opens up, but the jpg's aren't there. Now I can't see the files

  • Apps don't work after being installed

    I loaded several apps Saturday and on Sunday apps don't work.  Afraid to "reset" phone.  any ideas?

    See here for...
    Troubleshooting applications purchased from the App Store
    also, you will not lose any data or setting with a Reset or a Restart
    Restart / Reset
    http://support.apple.com/kb/ht1430

  • Few apps don't work after Anna update

    I got a new N8 recently (my last one was stolen, insurance covered most of it though) but with the same product code and everything. Of corse, it didn't come with Anna pre-installed (it actually came with PR1.0 and I remembered how horrible the phone used to be). However, I updated to Anna with Ovi Suite without problems but I had a few weird experiences with the additional 1/2 and 2/2, for instance, when the phone found these updates it said that they were about 30-40 kB which obviously is wrong, and it took a while to install them. Then later I got them both again but this time they had the right size. 1/2 installed without problems but I had to try with 2/2 several times before it (")worked(").
    Anyways, some apps like fMobi (pay-version) and the swedish app for public transportation don't work anymore. Don't know if they did on my last N8 after update. The additional updates were supposed to fix some non-working apps but it certainly isn't that way with my N8...advice please?

    Just to point out that the fMobi stopped working in my N8 too after the update.
    Uninstalled and reinstalled no end.
    But I found that if you go to the fMobi facebook page, he say's that wiith the new controls put in by facebook, it has somehow messed up the App. Check his page out and see what he says.
    Jurassic Park, Sam Neill to Dickie Attenborough " Mr. Hammond, the phones are working !"
    N8-00 Tesco UK 059C951, Lumia 920

  • Start and Start apps don't work after System Restore

    Hey guys, I tried to install Andy (Android emulator) on my PC today and I had to reboot after the setup was complete. This time when booting up, my computer froze before login screen. I've restarted the computer several times, but no login screen.
    So I used System Restore to restore my system (refresh point is 2 days old) and voila, everything works like it should...
    Except for Start menu, Cortana & search bar and notifications. Restarting explorer.exe didn't fix the problem. Even Start menu apps like Music or Store don't work... Only way to open the Settings app is to click on my network connection icon. Help please!
    I'm using build 9926

    ..............So I used System Restore to restore my system (refresh point is 2 days old)...............
    It is possible that you are missing the updates that were installed in that 2 days. You rolled back 2 days, now you need to reinstall those updates.
    If you cannot use Start Menu, please follow this instruction given by Insider Hub......
    Checking for updates may fix this problem. To check for updates without the Start menu, do the following:
    Select the Internet Explorer icon.
    Type http://update.microsoft.com into the address bar and select
    Enter.
    If you are prompted to run a control, click
    Yes or Confirm
    This should bring up the Check for updates window. Install updates.
    If no update is available, or the available updates don’t fix the issue, restart the device–this should make the Start menu appear. To reboot without using the Start menu:
    Hold down the Windows key and select L to lock the device. Swipe up or select
    Enter to open the sign in screen. Select the
    Power icon on the log in screen to restart the computer.            
    OR
    Hold down the Windows key and select R to bring up a command prompt. In the prompt, type
    shutdown –r to restart
    Good luck.

  • All apps don't work after backup restore

    My iphone 4 got stolen last week and so I bought a new iphone 4.
    Installed a bunch of apps when I got it. Then I plugged it into my laptop and itunes asked if I wanted to restore from back up (of my original iphone 4) or activate as new phone.
    I clicked restore from back up original iphone 4. Then after it loaded & did everything, I unplugged my iphone and none of my apps or email work anymore.
    When I click on any of my apps, it opens for 1 sec and then closes, returning back to the home page.
    For email I tried to go on 'add new account' and re-enter details, it does not work. Nothing happens when I enter the details. It doesn't register my new account.
    Please help?? What should I do?

    ..............So I used System Restore to restore my system (refresh point is 2 days old)...............
    It is possible that you are missing the updates that were installed in that 2 days. You rolled back 2 days, now you need to reinstall those updates.
    If you cannot use Start Menu, please follow this instruction given by Insider Hub......
    Checking for updates may fix this problem. To check for updates without the Start menu, do the following:
    Select the Internet Explorer icon.
    Type http://update.microsoft.com into the address bar and select
    Enter.
    If you are prompted to run a control, click
    Yes or Confirm
    This should bring up the Check for updates window. Install updates.
    If no update is available, or the available updates don’t fix the issue, restart the device–this should make the Start menu appear. To reboot without using the Start menu:
    Hold down the Windows key and select L to lock the device. Swipe up or select
    Enter to open the sign in screen. Select the
    Power icon on the log in screen to restart the computer.            
    OR
    Hold down the Windows key and select R to bring up a command prompt. In the prompt, type
    shutdown –r to restart
    Good luck.

Maybe you are looking for

  • The length of an integer

    Hello. Just for couriosity I'd like to calculate the length of an int and by that I mean return the number of digits. I know how to do this 'manually', but is there a method somewhere that looks a bit like this: object.calcInt(47653);//returns 5Thank

  • Printing faxes come out black

    I began using the Fax utility in 10.4.3 last week. The faxes are received without problem and stored as pdf files in a folder. When I open to read they open in adobe and look fine. When I print they come out with white text on a black background. Oth

  • How to display query result like this

    I got a query...gives list of names. i want to display 11.  Peter 12. Jessica 32. Leo 15. Jamie 36. Edward how i get static number infront of my query result. static number is not in order.

  • Changing date and time on commando

    So why is it that VZW hasn't responded to these request's?  I just looked at my phone, I'm in AZ and we don't observe DLST but I can't go into my settings and change the time or date manually?  WHY?

  • Required field error

    Hi, I have two very basic queries: 1) I created a simple non-mvc based bsp application wherein I marked few input fields mandatory by setting required property to true. On submitting the page it used to give me error incase I have left any required f