Apps dont respond when i presse the smartband button.
Example: i use the "find my phone" app (made by Sony).
Now i set the app to respond to my smartband.
One click should let my phone play a ringtone but that does not happen.
Only sometimes it works.
The smartband button does however ALWAYS makes contact with the phone when i press it for example 3 times for the lifelog app to make a bookmark.
Please fix this!
I use the Xperia z2, ohw and ALL apps becides the lifelog app dont respond.
Hi,
I have a Nexus 5 and even though the smart alarm works, the usual alarm does not. I mean, the phone works just fine, but the smartband won't vibrate when the alarm does. Is there a problem with my smartband?
I have another problem, it's that the smartband does not sync well the sleeping time. I have to hit refresh like 6 times for it to sync completely:
1. I go in lifelog: appears i didn't sleep
2. I hit refresh: It appears i slept 1 hour.
3. I hit refresh again: It appears i slept 3 hours
4. I hit refresh again: It appears i slept 5 hours
5. I hit refresh again... and so on until around 7 hours (which is what i actually slept)
Smartband has not been hit, nor has it been underwater for more than 10 minutes.
Similar Messages
-
Hi, when I press the power button on my MacBook nothing happens and it is driving me crazy If anyone knows how I can fix this problem, I will appretiate it very much
Thank youTry an SMC reset, which can often fix that: http://support.apple.com/kb/HT3964 . Note as you scroll down, there are two sets of directions for MacBooks, depending on whether you can remove the battery or not.
-
I updated to iOS 8 on my iPhone 5 yesterday and now when I press the home button even once, it opens the app switcher (which is supposed to only open after pressing the home button twice quickly). Sometimes pressing the home button once even brings up the assistive button (which for me should take three button presses). This did not happen before I updated my software. Has anyone else had this issue? Know how to stop it? Very annoying and at this point feel like I should have waited before I did the update.
Hello ..do you have a history on the phone? did you get it wet? was it dropped? have you been using an authentic ORIGINAL apple charging cable?
this problem occurs when there is a short circuit in the phone... you most likely got it wet at some point and maybe didnt even realize it? The moisture in the phone hasb probablly oxidized one or several capacitors, integrated chips thereby short circuiting the phone. that is why he phone is acting erratic because these short circuits inadvertently "activates" other circuits.. eventually the phone will not turn on anymore- the heat will stress the citcuit board and you will have discontinuity along your main power lines and the phone will cease to function..i see this alllll the time in our shop
the fact you upgraded to ios6 will even work the phone harder because its a more powerful operating system taking full advantage of the A4 chip.. -
My iPhone 4 won't switch off. When I press the power button at the top, the phone doesn't respond. Please help!
Try a reset
-
How can i delete the new feature "get in contact with your favourite persons"?? When u press the "home" button twice, theres a list on top of the ipad with the last persons youve been in contact with. How do i delete that, or some of them ;-) Sorry for the danish
You can turn that feature off in Settings>Mail, contacts, calendars>Contacts>Show in App Switcher>Recents>Off.
-
When I press the home button my iPad won't go to he home page. It is as though the button isn't working properly?
Try this to calibrate your home button:
Open a stock iOS app (e.g., Clock). Once the app is open, press your iPad’s power button until the ‘slide to power off’ screen appears. From that screen, press and hold your Home button until iOS force quits the stock app you have open. You’re done! -
whenevenr I call a person sometimes the phone gives me an option of callback and end when I press the callback button the whole screen goes blank and only the upper Taskbar where it shows network provider , time and battery percentage is shown
Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Remove all apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red (-) to delete all apps from this list.
- Press the home button twice when done.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue. -
Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row!
What should I do?Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back. -
When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' . My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I have restored my ipod to factory settings and rest it.
I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work. i can't find an automatic update of time zones on my itouch to turn this off.
-
How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please
Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device -
after resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!
Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device -
My macbook pro doesn't turn on. The battery is charged but the screen stays black when I press the power button. Anybody has a solution for me please?
Try a #1 SMC Reset and see the Apple links, if that doesn't work make a appointment for a evaluation.
..Step by Step to fix your Mac -
When I press the tab button all my bookmarks in a list show- How do i make this not happen?
When I press the tab button to open a new page, all my bookmarks in a list show- How do i make this not happen? It should be a blank page correct or the home page?
''cweb [[#question-1048679|said]]''
<blockquote>
When I press the tab button to open a new page, all my bookmarks in a list show- How do i make this not happen? It should be a blank page correct or the home page?
</blockquote>
Ok delete this questions I figured it out in add on settings
Maybe you are looking for
-
How do you get your experts with negative stance for new things / innovations to HANA
We have over 50 ABAP developer (senior experts). Primarily we develop in the old core module (SD, MM, FI, CO, HR, PP, CS, IH, PS) on ERP systems / business suite. We have three groups of developer: Group 1: They can’t await to work on new architectur
-
SAP report which display PO nos based on cost center, Internal orders
Hi. I am looking for a report in MM which will display the list of purchase orders for a cost center, Internal orders etc. The report output should have ALV grid format,The output of the report should have material no or short text, PO quantity, PO P
-
Oem explain plan produced doesn't correspond to explain plan with tkprof
Hello all, I am running OEM on a 10.2.0.3 database and I have a very slow query with cognos 8 BI on my data warehouse. I went to the dbconsole through OEM and connected to target database I went to look at the query execution and then got an explain
-
How can I change or add more dictionaries to Apples built-in dictionary?
Hi, I have recently up-dated to Mavericks and I just realized that my dictionary has changed from English to Spanish. I am in Spain but previous to updating tho OS i had and used the dictionary in English. Unfortunately I don't seem to have this as a
-
Regarding JSESSION in SOAP Header and in URL
Hi All, Is the statement xmlhttp.setRequestHeader("Cookie", "JSESSIONID=" + JSESSIONID); sufficient to make integration requests after sso log in? JSESSIONID is a vairable in javascript. I extracted the cookie value by using the getRequestHeader("Set