.Apps files wont install (HELP)

Hi, I download a few apps from the net, go to download folder try to install the app but it performs a flash then dose notting. It happening to all the .app files i download and try to install. Any suggestions please let me know
Thanks You
PS my console message says -
4/02/2014 9:43:00.580 pm Finder[261]: 8837325: Attempting to SIGCONT to pid #2100 failed, with errno=#3, or the process failed to actually start

If it is a .(DOT)APP file you don't need to install it. It is a Stand Alone Application. Just double click on it and it should run, launch, open.
If these .APP files are for iOS (That is the operating system that run on Apple "i" Devices, phone, pad and pod) then they won't work on Mac computers running OS X. Two Totally different Operating Systems.
You'll need to be more specific on what these APPs are.

Similar Messages

When ever my ipod is connected to the computer and download an app it wont install, when ever my ipod is connected to the computer and download an app it wont install

when ever my ipod is connected to the computer and download an app it wont install in itunes 11

What happens when you try?
Can you sync music?
Have you synced apps from this computer/iTunes library before? You an only sync app from the one syncing computer you can have.
Are the apps compatible with your model iPod/iOS
Do you have restrictions set that would prevent installation of those apps?
Settings>General>Restrictions

My itunes wont pick up my phone so trying to install again but now wont install help!!!!!!!!!, my itunes wont pick up my phone so trying to install again but now wont install help!!!!!!!!!

my itunes wont pick up my phone so trying to install again but now wont install help!!!!!!!!!, my itunes wont pick up my phone so trying to install again but now wont install help!!!!!!!!!

Hello leeminor,
If your iPhone is not seen in iTunes, please check out this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
If you have already started reinstalling iTunes, may also want to check out this article for the recommended steps to remove and install iTunes correctly.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Thank you for using Apple Support Communities.
Nubz

.app file not installing in Applications folder

Hi. I have created a package installer using Xcode's PackageMaker. I want to install a .app file into the applications folder, but when i am running installer package, it's showing that the software is installed succesfully. When i checked the applications folder, the application i m installing is not there. Can anybody help me to solve this?

I'm also having this problem with Package Maker (3.0.4, in Mac OS X 10.6) but I think I've discovered the solution.
First, when you test the installer, open the "Installer Log" window (select "Installer Log" from the Window menu, or press command+L). Then, proceed with the installation as normal, and check the Installation Log window once you reach the end of the installer. You should see a message in the logs which is something like:
Dec 16 15:48:57 yourhostname installd[16558]: correct/path/Applications/YourApp.app relocated to incorrect/path/Applications/YourApp.app
In my case the relocated path was actually build/Debug/MyApp.app inside my Xcode project directory.
The cause for this is, I think, a slightly hidden option in Package Maker. Under the Components tab in Package Maker (with your app selected in the left-hand "Contents" pane), select your app from the list of components, and click the "Relocation..." button in the bottom-right of the window.
This should open up a modal dialog with a list of options titled "Finding Component to Upgrade". The default option Package Maker seems to insert is "Combination search for <your app's identifier>". Under the configuration for this option, there is the description "Will succeed if an application is found at the specified path, by LaunchServices or by doing an exhaustive search".
From what I can tell, these options configure the installer to search the system for an existing version of the app to upgrade. If an existing version is found, the installer tries to replace it, in the location the existing app is in, rather than installing the app in the location you may have configured in Package Maker.
The search uses the application identifier string (eg "com.yourcompany.yourapp"), so it may find any version of your app just about anywhere on your system. In my case, I think, the installer is actually finding the copy of my app in my Xcode project's build directory, and trying to upgrade/replace that version.
The solution may be:
a) clean out all your build directories, and remove any other versions of the app you may have on your system, after you've built your installer with Package Maker and before you actually test the installer (you'll need a copy of your app to build the installer). If I do this with my build directories, the app is installed to the expected location.
b) change the "Relocation..." options for your components in Package Maker to not use Combination Search or Exhaustive Search. Instead use one of the other options, such as "Check Specific Path" (only upgrade existing versions if they're in an expected location like /Applications/yourapp.app). Exhaustive Search may be suitable if you include and exclude specific directories.
Read through the different options available and decide what's best for your app. You may like to use different options during development, as upgrading existing versions may be useful functionality for the end user of your app.

CC desktop app will not install, help

I have a MacBook Pro OSX v10.8.5 and purchased PS via the CC with an annual membership. I can not get CC installed on my computer! heres what happens:
1. I click CC installer icon on desktop
2. a text box appears saying "CC Installer wants to make changes. Type your password to allow this." I do do that.
3. Initalizing installer pops up, loads quickly, then disappears.
4.Then a white verticle rectangle with a black toolbar on top (home/apps/ file/ behance) appears and a loading circle spins.
5. This loading circle will spin forever and nothing happens. Ive tried restarting computer, uninstalling and reinstalling the installer, and updating my comps software.
What can I do?
Thanks.

Jubarudi please try solution 2 in CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html. Removing the OPM.db file should resolve the difficulties you are currently experiencing.

Itunes exe file wont install

Hi,
Two days ago I formatted my pc (Windows 7 Professional 32bit) & have been going through the process of downloading & installing various programmes online. I've installed half a dozen or so & have got to iTunes. Visited apple.com to download the latest version, but everytime I double click, or 'run as adminastrator, nothing happens..?
Restarted PC, turned off firewall & done Windows update, numerous times now & still nothing.
I finally had the bright idea of downloading Quicktimeinstaller, which was no problem, this then presented me with the option to download iTunes. This I did but the file gets half way through the download & I get "iTunes has an invalid signature. It will not be installed"
I'm pulling my hair out now, can anyone help? I have no previous iTunes installed as hard drive was wiped & every other program I've downloaded has istalled 1st time.
Many thanks

OK after hours of my time & a significant loss of hair, I've managed to download it...!!!!
All I did was went to:
http://http://www.dkszone.net/itunes-10-1-download-supports-ios-4-2-airplay
and downloaded iTunes 10.1 (older version) this came down as the normal setup.exe file and installed to my PC, as soon as you open and run this version of iTunes it will inform you of an updated version 10.6. Just hit the install and go...
IT WAS THAT SIMPLE
I hope this will help others NOT to waste precious time, as I did..!

Creative cloud wont install - help

I have an old pc working well with windows 7 prof and cannot get the exe file for CC to install the app. It starts and then ends with no messages.
Jack DeMember

I am interested in what is going on, not what it could be. The processor is AMD Athlon XP 2600 2.17GHz. It is working fine with a solid state drive and windows 7 prof. If it rejects this processor then there ought to be some message somewhere. There is nothing.

My itunes app updates wont work, help please?

HI, i recently created a new apple ID due to my old one being disabled. I have quite a few much needed updates, which include paid and nonpaid items. (irrelevent?) My new ID works in all feilds except updates. When the verification box pops up it uses my old email as my username and I cannot find out how to change that in order to update my apps. The iTunes store itself shows that it is using my new ID, how can I change the username in my verification box inorder to update?
*may I add that I have tried turning on and off my iPhone, and resetting my ID in my computer too.*

Hi Everyone,
The same has been discussed in the below mentioned link:
http://forums.adobe.com/message/5509684
You may also contact Customer/Chat support:
http://www.adobe.com/support/download-install/supportinfo/
Let us know if this helps,
Regards,
Gurleen

App update wont install

Hi.
Im having a serious problem. I've downloaded the Diamond Twister App from iTunes store. The problem is, that i WILL NOT install!! It downloads, starts installing and when the blue bar is almost done, it starts over. I let it do that like 10 times and suddenly my iPhone freezes and reboots.
The problem is, that i can't even remove this app, since I downloaded on my iPhone. So it doesn't show up in iTunes.
What should I do? :/
Thanks in advance!

Only fix: Restore!

Office mac 2011 dmg file wont install

Hey, we brought our first mac the other day so are not too familiar with it, i need microsoft office for work purposes so we purchased it downloaded the file which is X18-08827.dmg it is refusing to open and start installing and when double clicked comes up with a box saying "following disk images couldnt be opened" "reason - not recognised"
I have tried going to the security settings and allowing all programs to be opened but this has still brought no joy
Hope someone can be of assistance
Many Thanks

Simply re-download it from Microsoft's website. If it doesn't install then the issue is probably a Microsoft issue. You can locate the download at:
https://www.microsoft.com/mac/buy

Flash and reader wont install help please

Hi , never posted on a forum so be gentle
neither flash or reader x will install , it gets to 50 percent then gives a generic fail message ( flash encounterd problems andthen just stops)
im using an old
p4 2.4
gigabyte 8ipe100 mobo
ac 97 sound
ati radeon 9800 pro
windows xp pro 32 bit
the latest firefox browser
was trying to install the latest flash player from the main adobe website
any help or ideas would be greatly appreciated, thanxs in advance

For Adobe Reader, use the installer from http://get.adobe.com/reader/enterprise/
If that does not resolve your problem, please post in the Adobe Reader forum.

HT2376 Trying to install scrapbook software but wont install due to quicktime

I recently tried to install Software Scrapbook Boutique on my MAC Pro OS X Version 10.7.4 and all the files wont install without Quicktime. I have Quicktime Version 10.1, and it won't work. I am administrater, I recently bought my laptop from a friend whose friend needed money to get out of town, so he's gone.
This is my first Mac so it anyone can help I would greatly appreciate it. I just want to know what I'm doing wrong and how to fix this. Thank you.

the specification for Scrapbook is QuickTime version 7.5.0 or higher and you candown load it here:
Quicktime 7 for Mac

New Laptop , I Tunes wont install

Downloaded intunes and it wont install because quicktime wont install
HELP plz ?

Yeah, you're pointing in the wrong direction when you blame the issue on your iPod. Reference the KB article mentioned above, http://docs.info.apple.com/article.html?artnum=302335 and then check your windows user settings in the Windows Control Panel and then ensure that you are an Administrator of the computer. If not, login as one and uninstall/reinstall.
If that fails, check to ensure that the Windows Management Instrumentation (WMI) service is running by typing "services.msc" (without quotes) in the Run menu (Start/Run/services.msc).
Lastly, try running the iTunes installer file after you have disconnected from the internet (physically un-plug the network cable from your computer if you're on DSL/Cable/LAN) then disabled your anti-virus software.
If these steps work for you, please let us know here on the forums. If not, we'll still try, but remember, this is an Apple forum, so to expect a lot of Windows answers may be like going to your barber for advice about your overbite.
Hope this helps.

Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
iv unistalled flash, iv checked plug ins it just wont work,

It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

I can't install any app because my install button wont work pls help

I can't install any app because my install button wont work pls help, what shall I do?

- What do you mean it does not work? Could it be that the app ere not compatible with your model iPod and its iOS?
- Try going to Settings>Store and sign out and sign back in.

.Apps files wont install (HELP)

Similar Messages

Maybe you are looking for