Apps Install Location Doesnt do anything?
I had CS6 installed on my machine in the C drive (125GB SSD) This was done with the very first cloud installer.
I uninstalled it as I have a new SSD that I want my apps to be installed on. I just want my OS on the C drive.
I donwload the cloud manager software.
Go to the preferences menu and find the following options:
Apps: Install Location
Files: Folder location
Before I insatll any apps, I set both of these to point to my new SSD as that is the location I want to install apps in and files.
I then click on Photoshop CC to install.
I always installs on my C drive.
Why? What is the point of a preference to install in a different location if it doesnt do anything?
Has anyone managed to install Photoshop in any other drive than the C drive? If so How?
You cant even choose where you want to install the Creative Clud app?
Changing product installation location in CC App
Launch CC app.
Click on the Setting in the upper-right corner.
Click Preferences-> App
Click on Change and then navigate to your desired installation location and select the folder.
Start the Install process.
When you change it in preferences it get stored, Please confirm Preferences-App is showing the location you specified or not.
Try re-launching your CC app again after changing the preferences.
Regards,
Ashutosh
Similar Messages
-
i installed a free app and then deleted the app. under apps the app is still listed and says open, but when i tap on that it goes to another screen and when i tap on open it changes to free when i tap free it changes to light green install and tap again goes to all green install and what do i do then do not see anything to click on to make it install. what am i doing wrong. this is for a iphone 5s
The 'open' indicated that the App Store though that it was still installed on your phone.
Have you tried closing the App Store app via the phone's multitasking bar and seeing if you can install it after the phone has restarted ? Double-click the home button to open the taskbar, and then swipe or drag the App Store app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar. You should be able to redownload the app by tapping on the cloud icon next to it in the Purchased tab in the App Store app
If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot. -
my iphone 5 was just stolen and i dont have the find my phone app or any other tracking app installed previously. how can i locate my device?? please help
If you didn't set up Find My iPhone in the iCloud settings, then you can't. Notify the police and change the password to your Apple ID and any other online services you used from that iPhone, just as a precaution.
Regards. -
How can I change the install location when installing an App (i.e. Lightroom) from Creative Cloud?
How can I change the install location when installing an App (i.e. Lightroom) from Creative Cloud?
Rolfjuelg I am sorry but Lightroom does not support custom installation locations through the Creative Cloud. You can find more details at Lightroom and Creative Cloud FAQ.
-
Hi,
I have lost my iphone but it has not been stolen as it is still ringing. Is there a way of being able to locate the iphone at all, despite not having any relevant apps installed?
AndyOther than physically looking for it, no. There is no way to locate it.
-
How do you change Metro apps default install location?
I can't seem to find an answer for this any ware, I have a 120gb ssd drive that I use for my os, and some programs. I have another 1.5tb drive that has most of my applications and data. Since space is kind of limited on my ssd drive, I would
like to change the default install location for metro apps (Microsoft store apps, or what ever it's called) to point to my larger hard drive. I don't see a way of doing this myself, so I figured I would ask here. I also work for a company that
sells custom built computers, and this is a very popular setup, but I can see this quickly becoming a problem with this type of setup. Any help would be greatly appreciated :DHere is what I did. I must warn that I haven't had any issues on my own machine doing this, but you might, so proceed with caution. Also, it's always a good idea to create a restore point before
starting.
1. Create a folder on your other drive that you want the applications to install to. I used the same location on my system, only on the other drive.
2. Now open up regedit, and go to this location.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx
3. Now right click on the "Appx" folder, and go to "Permissions"
4. Click "Advanced", and click "Change" at the top to change the owner.
5. Type in "Administrators" for the owner, and click ok, then ok again.
6. This should take you back to the regular permissions window. From here make sure "Administrators" or your user name have "Full Control", and click ok.
7. Now double click on "PackageRoot", This should bring up the String Editor.
8. Change the "Value Data" to the new folder you created, and hit ok, and close the registry editor.
9. Lately, give your machine a reboot, and you should be all set.
Give me a click if you found this helpful :D
I
did this to no avail. I am getting error message "this app couldn't be installed" error code 0x80073cfd.
I
am doing this on a Windows Surface RT. Here is what I did:
1. refreshed Surface to original setup
2. uninstalled all preinstalled metro apps (could not uninstall store and IE)
3. updated all windows updates (there's 3 and they are time consuming)
4. Created the same folders on my SD Card (\Program Files\WindowsApps\)
5. took ownership over appropriate registry item (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx)
6. Changed the drive letter for the "PackageRoot" (from C to D on my device)
7. Shut down (full shut down) and restarted my device
When I got back in, I tried to install the metro apps and I got the above error.
Any thoughts as to why? -
my iphone 4 wont download apps, says my storage is full, but when i delete photos/apps, its still says my storage is full. whenever i try to backup my phone, it doesnt work. anything i can do?
Go to Settings - General - Usage and see which apps are taking up a lot of space.
In my experience, if you haven't cleaned out your Messages that is where a lot of space is consumed. -
I'm unable to change my install location for my apps.
I'm unable to change my install location for my apps. I changed the preferences to the harddrive I want the apps to download to, but they keep trying to download to C.I don't have enough room on that drive
Fixed. It seems like for whatever reason it took a good 10 - 15 minutes for it to recognize the changes in the preference menu
-
CS3 InDesign & Illustrator Install Exit Code 7; Other CS3 Apps Install Fine
I feel like I'm beating a dead horse... (no offence to horse lovers out there - it's just an expression)
I'm having trouble performing an silent install of the CS3 suite from a network share on Windows 7. I've read through a number of posts on here, one of which was a 3 page post on this issue where Mac & Win 7 users alike posted failures, successes and how they got there, and another about removing the OS check feature from the application.proxy.xml file (which didn't work for me; unless I did something wrong...?) Unfortunately for me after trying much of what was suggested, I'm still facing a brick wall.
All these machines are Core 2 Duo's clocked at no less than 2.2GHz, have 4GB of RAM, have over 100GB of free disk space and are running fully updated/patched installations of Windows 7 32-bit (x86) with Office 2007 Enterprise.
When I try to install the suite silently it fails with 'Exit Code: 7', which according to the CS3_Deployment.pdf means "Unable to complete the silent workflow." If I take out the "--mode=silent" switch, the GUI launches and installs fine. I took a look at the compressed log file & searched for "Return value 3", "ERROR" and "FATAL" for clues, but its vague and nondescript. I didn't copy/paste the entire log in this post for brevity's sake, but you can check it out here:
Condensed Version: http://pastebin.com/eFKpe9wK
Unabridged Version: http://pastebin.com/MQDeQZmF
Instead, however, I do want to touch on just a few things from the log:
[ 9660] Thu Dec 02 07:08:13 2010 INFO
BEGIN Setting requested payload actions
[ 9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {AC76BA86-1033-0000-7760-000000000003} Adobe Acrobat 8 Professional (At install, older versions get upgraded) per deployment file.
Setting action for {7BB7F66A-D798-45A3-A383-0727FB1EBF8E} Adobe Flash Video Encoder per deployment file.
Setting action for {abd781e6-d5ca-45aa-a5f7-f64799eb1c04} Adobe Version Cue CS3 Server per deployment file.
Setting action for {00E5C764-9525-44C3-8404-712AD06AE12A} Adobe Dreamweaver CS3 per deployment file.
Setting action for {3BC8460B-085E-47F3-9C62-8FFCBAF11D78} Adobe Flash CS3 per deployment file.
Setting action for {C4519961-AC64-4565-B3AF-9050296B5D5A} Adobe Illustrator CS3 per deployment file.
[ 9660] Thu Dec 02 07:08:13 2010 INFO
Selection of payload {C4519961-AC64-4565-B3AF-9050296B5D5A} Adobe Illustrator CS3 is forbidden by the policy.
[ 9660] Thu Dec 02 07:08:13 2010 WARN
Error setting action for {C4519961-AC64-4565-B3AF-9050296B5D5A} Adobe Illustrator CS3:
Localization: missing stringID "locPayloadSelectSystemRequirement" for en_US in C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804\resources\main.xml
system check
The minimum system requirements listed below are needed in order to run Adobe Illustrator CS3 and are not met.
- Windows XP Service Pack 2 and greater
- Windows Vista
[ 9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {24D77A7C-E10B-4057-9974-FAB8BFDAC853} Adobe InDesign CS3 per deployment file.
[ 9660] Thu Dec 02 07:08:13 2010 INFO
Selection of payload {24D77A7C-E10B-4057-9974-FAB8BFDAC853} Adobe InDesign CS3 is forbidden by the policy.
[ 9660] Thu Dec 02 07:08:13 2010 WARN
Error setting action for {24D77A7C-E10B-4057-9974-FAB8BFDAC853} Adobe InDesign CS3:
Localization: missing stringID "locPayloadSelectSystemRequirement" for en_US in C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804\resources\main.xml
system check
The minimum system requirements listed below are needed in order to run Adobe InDesign CS3 and are not met.
- Windows XP Service Pack 2 and greater
- Windows Vista
[ 9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {30C4B843-28DA-466F-AFCA-CB0ED153C826} Adobe Photoshop CS3 per deployment file.
[ 9660] Thu Dec 02 07:08:13 2010 INFO
Selection of payload {30C4B843-28DA-466F-AFCA-CB0ED153C826} Adobe Photoshop CS3 is forbidden by the policy.
[ 9660] Thu Dec 02 07:08:13 2010 WARN
Error setting action for {30C4B843-28DA-466F-AFCA-CB0ED153C826} Adobe Photoshop CS3:
Localization: missing stringID "locPayloadSelectSystemRequirement" for en_US in C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804\resources\main.xml
system check
The minimum system requirements listed below are needed in order to run Adobe Photoshop CS3 and are not met.
- Windows XP Service Pack 2 and greater
- Windows Vista
[ 9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {7005ECBC-F54B-42FD-81E4-934BC43FA329} Adobe Creative Suite 3 Design Premium per deployment file.
PayloadPolicyNode.SetAction: IY->IY for {7005ECBC-F54B-42FD-81E4-934BC43FA329} Adobe Creative Suite 3 Design Premium
[ 9660] Thu Dec 02 07:08:13 2010 INFO
END Setting requested payload actions
[ 9660] Thu Dec 02 07:08:13 2010 WARN
Some payload actions specified in the deployment file could not be applied.
...snip - snip...
[ 9660] Thu Dec 02 07:08:17 2010 INFO
Checking bootstrapper progress
Ran uninstall for the bootstrapper due to an exception
[ 9660] Thu Dec 02 07:08:17 2010 FATAL
Exception: Payload actions could not be set. Search the log for "BEGIN Setting requested payload actions" for details.
Exit code: 7
[ 9660] Thu Dec 02 07:08:17 2010 INFO
I've got some initial questions that pertain to what's in the log file:
The areas in bold: Since the same install also fails on Windows XP machines, what does this mean exactly?
The areas in italics: Can anyone expand on what that means?
The underlined areas: What 'Policy' is this referring to: Setup's own internal policy (like the OS check) or something else?
Here's what I've done so far:
Went through the 'Run a silent installation of Adobe Creative Suite 3' document
Went through the 'Troubleshoot installation with install logs | CS3, CS4' document
Used the Adobe Support Advisor to go through the logs, but it always says that no problems are found.
Recreated the install & uninstall XML files, twice, via the "setup.exe --record=1" method for each application & the entire suiteNot that I think this is important, but I was never prompted to enter a serial number when creating the .XML files.
Renamed the XML files for each application (e.g.: Photoshop-install.xml; CS3Suite-install.xml; Flash-remove.xml etc.)
Copied the XML files to a common folder on a network share (e.g.: \\path\to\Adobe\Design Premium CS3\Adobe CS3\XMLs)
Created install batch files for each application, including the suite, that install via the following command"\\path\to\Adobe\Design Premium CS3\Adobe CS3\Setup.exe" --mode=silent --deploymentFile="\\path\to\Adobe\Design Premium CS3\Adobe CS3\XMLs\Photoship-install.xml"
Tried the installs with & without the "--skipProcessCheck=1" switch but there's no change.
No applications are running during the installs.
Verified my application.xml.override file was in \\path\to\Adobe\Design Premium CS3\Adobe CS3\payloads\AdobeDesignSuitePremiumen_US_Volume
Verified I didn't have any strange characters in my application.xml.override fileI deleted and manually retyped all double quotes just to be sure.
I noticed that the "installSourcePath" property in the install.xml files created point to a local location rather than, what I would expect to be, the installation source folder where I copied the contents of the DVD to. On a whim I changed it to point to the copied DVD files but that didn't seem to help either so I changed it back.
FROM: <Property name="installSourcePath">C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804</Property>
TO: <Property name="installSourcePath">\\path\to\Adobe\Design Premium CS3\Adobe CS3</Property>
Aside from Acrobat Reader 9.4.0, Adobe Flash Player 10 (ActiveX & Plugin) and maybe Shockwave 11, these machines never previously had any other Adobe products installed.
For what its worth, uninstalling Acrobat Reader 9.4.0 doesn't seem to help either. I didn't try removing Flash Player or Shockwave [yet].
Using the install XML files I created via "setup.exe --record=1", when I run installs for the individual applications silently [via batch files] one at a time, all applications install fine except for Illustrator and InDesign: Exit Code 7.
This may further help suggest my application.xml.override file is fine.
Even more interesting is that I get the same error on Windows XP and Windows 7 machines alike. (See the image below taken from an XP machine; the same happens on Windows 7 machines so it doesn't appear this problem is OS specific.)
Other than removing Flash Player, Shockwave and ripping out our Anti-Virus solution (Sophos), which is going to be difficult, is there anything I've missed?
Anyone have suggestions on why Illustrator and InDesign don't install?I spoke with Adobe Support today and was directed to this support article:
CPSID_84332 - http://kb2.adobe.com/cps/843/cpsid_84332.html
Although this article speaks to CS5 installations, even though I thought I made it clear that I was working with CS3, I decided to give it a shot anyway.
The first comment passively suggests troubleshooting [all] "install errors using Creative Suite 5 install logs", which links you to CPSID_84451 - http://kb2.adobe.com/cps/844/cpsid_84451.html. But again, its CS3 I'm having trouble with and I've already linked, what I believe to be, a more appropriate CS3 [and CS4] log troubleshooting document in my first post.
Step 1 requires restarting "your computer in a minimized state before running the installer." - This isn't at all optional nor ideal when we're talking about silent installations, especially when they can take place in the middle of the day - its highly distruptive, or deployments in general. Plus, I'm not interested in developing a package that will perform the steps outlined and then undo everything. Its important to note that this isn't a one-off problem: every machine that needs to have CS3 installed experiences this problem. But for what its worth:
I did as instructed in the troubleshooting documentation but it didn't work.
No other applications fail to install, and all but these lone Adobe CS3 apps install fine; what gives?
Step 2 is to perform a repair installation of the Windows Installer. (FYI: Windows 7 ships with 5.0, my version is 5.0.7600.16385, and for the record there doesn't seem to be a redistributable download available at this time.) I can't use this as part of my silent installation package because it calls you to run `sfc /scannow` which is time consuming and, if something is found, often requires a reboot. Fortunately for me, "Windows Resource Protection did not find any integrity violations."
Step 3 is to preinstall Adobe Air and the AdobeHelp payloads:
AIR isn't part of the CS3 DVD, it has to be downloaded & installed silently (via -silent -eulaAccepted if you don't have the redistributable package); this was done but didn't help.
There isn't an 'AdobeHelp' payload, only 'AdobeHelpViewerAll', which will not allow a manual instalation so I can't do that.
In summary, these tips unfortunately did not solve the problem. -
Why can't I download OS X Mavericks? The download option is malfunctioning. I already checked that my mac version can have free upgrade. I click download, but it just doesnt do anything. I went to purchase tab, clicked "download" next to the app but still nothing happens. It's not internet problem because everything else on the app store works. The only thing not working is Mavericks downloading and I don't know why. Please help.
To install Mavericks, you need one of these Macs:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory
8 GB or more of available space
Since Mavericks requires 8GB's or more of free disk space, control click the MacintoshHD icon on your desktop or open the Finder, right or control click startup disk in the Sidebar on the left then click Get Info.
You'll see Available and Capacity. Make sure there's at least 15% available disk space.
If installed, disable anti virus software before downloading Mavericks. -
Lightroom installs to default location despite specific install location set in application manager.
Lightroom keeps installing to the default install location even though I have a specific install location set in the application manager. Is there a fix for this issue?
These days, many people run Windows 7 PC, not Mac. Not anymore, even in the community of users of Adobe.
These days, installing a 64bits version of windows 7 is not only wise, but is mandatory if you buy hi-level CPU.
These days, many people running a Windows 7 Pro 64bits version are likely to have a SSD where the OS is located (I understand that people with Mac computers can have hard times realizing it).
So when we see:
Lightroom, but also Edge Inspect, Edge Code and Edge reflow as well installed in C: despite having changed default location...
Photoshop and Illustrator will be installed both in 32 and 64 bits versions...
months have passed since we yell in users forum
we presume many things... but not that you listen to your customers, nor that Adobe's looking for any solutions... nor that people who test your apps really own a real computer (no: anything running natively MAC OS is not a real computer... it's a toy for hipsters, a start for children or the only way for old people to keep in touch qith reltives via Facebook, but it's not a computer... I run a computer... nothing to compare).
So will we get any answers ? -
Install location not working??
In preferences you can change the default install location for apps if you have not a lot of space on your C drive like i do and you can change this to an alternate disklocation like D:\adobe\
Why is this function not working??
It keeps installing all the apps on the C drive!
I tried to reinstall the CC application, deiinstall all adobe apps. run the adobe cleanup tool, looked for a registry key that may help to figure out where the install location can be edited me but nothing helps!
It took serveral hours to find a solution without any progress.
Someone please??
Thanx in advance,
LouisAren't you getting the option under Prefrences>> Apps and Change location in Creative cloud app?
Is it greyed out? Please post a screenshot if possible.
Thanks!
Ankit
I am having the issue where when I go into Preferences>> Apps >> Settings >> Change Location is greyed out and I can't type anything into the box. I've attached a screen shot. -
IPhone stuck in reboot loop - too many apps installed?
Hi guys!
Starting some months ago, I've had nothing but problems with my iPhone. However, I've been dealing with most of these or even solved them.
But now I'm stuck on a reboot loop for a few days and don't know what to do.
When did it start? I think it was in May when I first got panic.plist, ResetCounter and SpringBoard-CrashLogs under "Diagnostics and Usage". Following this, everytime I rebooted my phone or the battery was empty, it could take some more minutes than normal for my iPhone to boot. This loading time increased and increased, in October it once took more than two days for my iPhone to reboot. I now have really thousands of those ErrorLogs. The Apple support on the phone couldn't help me either. Additionally, the phone performed some cruel changes I can't explain: Once the language was changed, once the photo gallery had to be restored (the iPhone did that on its own).
However, sometime in November the iPhone crashed, and I was already thinking that it would now last a few days until I could use it again. But somehow it was done within 15 minutes. Without any error or reboot loop. The last two months I haven't had any problems with this until the battery was empty three days ago.
Since then, I have had the iPhone plugged in so the battery doesn't get empty and it's stuck on the bright Apple logo. After about 210 seconds the logo gets dark, then the screen is completely black and it's starting the same procedure again. Sometimes I get the vibration, sometimes the loading circle (white wheel of death!), but everytime it just starts over again.
I am pretty sure this problem appears because I have more than 1300 apps installed (yes, this is a very huge number, but I remember Steve Jobs saying that, with the folders in iOS 4, it would be possible to have a few thousand apps installed), 4000+ photos, and so on. I am pretty sure it's not a hardware, but a software problem. In detail, it's about the SpringBoard. The iPhone 4S only has 512MB RAM, so it's hard for it to load 1300+ app icons into its memory (which it has to because the SpringBoard has to run without any lags). Only in some cases it's able to boot that up, but I have absolutely no idea which cases these are and why it has run well for the last two months, but beginning with the new year stopped to work.
Furthermore, the panic.plist entries all say that the problem is a watchdog timeout. Apple's iOS seems to allow the devices only to take up to two minutes (always around 120 seconds in the CrashLogs) to boot up, then probably another 120 seconds to launch the SpringBoard process (which explains the watchdog timeouts in the SpringBoard-CrashLogs).
I will not restore the iPhone because I unfortunately haven't backed up for a long time and there have been many data changes since the last backup.
So altogether, I tried to collect all the information I know here, but that's really not enough. Apple unlikely wants to help me, the phone support was really nice, but even asked his superior, who couldn't help either.
My questions to you folks now are: Do you have any more information regarding panic.plist's, watchdog timeouts or reboot loops?
What would your advice be? Any chance to get onto my data and back it up? Or is waiting the best solution?
Would it be better to try several hard resets, or let the battery run empty and start the whole process again, or just let the phone plugged in so it tries to reboot on and on until it's hopefully successful sometime?
And: Would it maybe increase the loading time if I would take the SIM card out of the iPhone, so the chance to have an successful try would be higher?
Note: I am still using iOS 5.1.1 because I am completely sure that I'd have to buy an iPhone 5 to run 1300+ apps on iOS 6.Okay, some more information about this.
Apparently there is a 'watchdog' that listens whether the iPhone's software responds or not. If it doesn't, it forces a restart, and also creates a panic.plist entry (under Diagnostics). Unfortunately the responding time is only 120 seconds. The problem I have now is the so called 'Application Map'. To ensure a smooth browsing through the different screen filled with apps, this map is regenerated everytime the user installs a new app or deletes one. Because I have more than 1300 apps installed, generating this Application Map usually takes more than two minutes. I can only hope that sometime in the next days my iPhone will be able to do this in less than 120 seconds (like it has done that several times before).
I still can't explain why everything had been working great during the last two months. I have probably installed some new apps, but also deleted other ones, so the number of total apps didn't really increase heavily.
However, I've read about some possible solutions to this problem (without restoring - which would solve the problem only temporarily anyway):
Hard-resetting the iPhone until the screen is completely black, then wait a few minutes, then turn the device on. It's possible that this has to be repeated several times, but for the user who posted this it resolved the issue.
For all the (in this case lucky) guys with a jailbreak: SSH into the iPhone, then temporarily move the watchdog located under /System/Library/SystemConfiguration/mobilewatchdog.bundle to a different folder, the iPhone will boot up after a few minutes. Then just move the watchdog back. It's a shame that apparently jailbreak users can resolve this issue, while normal users can't.
I also want to note that this problem has been appearing since iOS 2, which came out more than four years ago. It would be really no big deal for Apple developers to change the 120 seconds to e.g. 300 or even more. I've found hundreds of threads, not only here, where users complain about exactly the same issue. I don't have any hope that an Apple employee will ever read this, but if so, please keep that in mind. I don't understand why Apple has done nothing to solve this issue.
However, if you have any more ideas, please reply here. If there's anyone around here who has managed to successfully install more than 1300 apps on his iPhone (or iPod touch), please post that. -
Not able to sign in to Company Portal app installed from Windows Store
Not able to sign in to Company Portal app installed from Windows Store .I'm using Workplace joined (Intune + SCCM 2012 R2) Windows 10 Laptop.
Following is the error which I got while trying to sign in with my Intune trail account
Any idea much appreciated :)
--- Exception Details ---
System.Exception: Authentication failed because response data could not be parsed.
Stack Trace:
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<UpdateContextFromAuthenticationResponseAsync>d__c.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<AuthenticateAsync>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Management.Services.SelfServicePortal.ViewModels.ServiceLoginPageViewModel.<AuthenticateAsync>d__b.MoveNext()
2014-10-30T17:44:27.6437234Z
VERB MethodEnter
Common 1800
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - CheckMonitoringCapable() Enter
2014-10-30T17:44:27.6437234Z
INFO Event
None 0
User is not authenticated, monitoring is not capable.
2014-10-30T17:44:27.6437234Z
VERB MethodLeave
Common 1801
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - CheckMonitoringCapable() Leave
2014-10-30T17:44:27.6437234Z
VERB MethodEnter
Common 1800
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - DelayPolling() Enter
2014-10-30T17:44:27.6437234Z
INFO Event
None 0
Attempting to delay polling task for '30' seconds.
2014-10-30T17:44:45.9431915Z
INFO Event
Application 611
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 WebAuthenticationBroker AuthenticateAsync to url: https://go.microsoft.com/fwlink/?LinkID=314087&&appru=ms-app://s-1-15-2-2666988183-1750391847-2906264630-3525785777-2857982319-3063633125-1907478113/&api-version=1.1
returned result:Success
2014-10-30T17:44:45.9431915Z
INFO Event
Application 611
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 WebAuthenticationBroker returned result:Success
2014-10-30T17:44:45.9744572Z
INFO Event
Application 208
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Authentication failed because response data could not be parsed.
Exception:
System.ArgumentException: User agent string ("Mozilla/5.0 (Windows NT 6.4; Win64; x64; Trident/7.0; MSAuthHost/1.0; rv:11.0) like Gecko") does not contain match for Windows version regex pattern ("Windows
NT (?<Version>6\.2|6\.3)").
Parameter name: userAgent
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.AuthenticationResponseData.GetWindowsVersion(String userAgent)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.AuthenticationResponseData..ctor(String responseData)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<UpdateContextFromAuthenticationResponseAsync>d__c.MoveNext()
Response Data:
wresult=eyJ0eXAiOiJKV1QiLCJhbGciOiJodHRwOi8vd3d3LnczLm9yZy8yMDAxLzA0L3htbGRzaWctbW9yZSNyc2Etc2hhMjU2IiwieDV0IjoieE42Z05aYlhvYmRRMkhhbl8yT08xTUZ1SHFZIn0.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.bZmz4BNmW1sg90bmUED-y0gSpR3qFfHpBZz6jf_7pMIEiO-n8TF8aPryDgLE0_pOXBBxjGZj2CjvvCjKE3xtc_RCfQ66f8sPjJDk5nDn87Zqr3nuybcWyr_QJzLAV-wrqBQyZbhiKXjAHByQfovl25EJEljwiYc8gvDAh6mSpOiSNDRo51iycmtFPJVg9SLomONTtrIvNI-c4OksER4smKiuV989EBxA2IUUbuUMpEXArFBtAJMQe4IyDCdVV_c-45i69cVNeIjcc9WkzgUx4wkdMOVXY-TVKGkyW67Iu62dU_3fJhRJ6Cc_ZfSFWby-QB9Vj-1qu3LdtkU4z4LX_Q&tokenCookie=eyJ0eXAiOiJKV1QiLCJhbGciOiJodHRwOi8vd3d3LnczLm9yZy8yMDAxLzA0L3htbGRzaWctbW9yZSNyc2Etc2hhMjU2IiwieDV0IjoieE42Z05aYlhvYmRRMkhhbl8yT08xTUZ1SHFZIn0.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.bZmz4BNmW1sg90bmUED-y0gSpR3qFfHpBZz6jf_7pMIEiO-n8TF8aPryDgLE0_pOXBBxjGZj2CjvvCjKE3xtc_RCfQ66f8sPjJDk5nDn87Zqr3nuybcWyr_QJzLAV-wrqBQyZbhiKXjAHByQfovl25EJEljwiYc8gvDAh6mSpOiSNDRo51iycmtFPJVg9SLomONTtrIvNI-c4OksER4smKiuV989EBxA2IUUbuUMpEXArFBtAJMQe4IyDCdVV_c-45i69cVNeIjcc9WkzgUx4wkdMOVXY-TVKGkyW67Iu62dU_3fJhRJ6Cc_ZfSFWby-QB9Vj-1qu3LdtkU4z4LX_Q&userId=dd6a6db8-3f7a-4084-9fa1-198d5ca0905b&tokenExpiry=1196&serviceLocatorUrl=https%3A%2F%2Fmanage.microsoft.com%2FRestUserAuthLocationService%2FRestUserAuthLocationService%2FServiceAddresses&userAgent=Mozilla%2F5.0+%28Windows+NT+6.4%3B+Win64%3B+x64%3B+Trident%2F7.0%3B+MSAuthHost%2F1.0%3B+rv%3A11.0%29+like+Gecko
2014-10-30T17:44:45.9744572Z
VERB MethodLeave
Common 1801
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService - AuthenticateAsync() Leave
2014-10-30T17:44:45.9744572Z
ERR_ Event
ViewModel 2202
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 System.Exception: Authentication failed because response data could not be parsed. ---> System.ArgumentException: User agent string ("Mozilla/5.0 (Windows NT 6.4; Win64; x64; Trident/7.0; MSAuthHost/1.0; rv:11.0)
like Gecko") does not contain match for Windows version regex pattern ("Windows NT (?<Version>6\.2|6\.3)").
Parameter name: userAgent
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.AuthenticationResponseData.GetWindowsVersion(String userAgent)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.AuthenticationResponseData..ctor(String responseData)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<UpdateContextFromAuthenticationResponseAsync>d__c.MoveNext()
--- End of inner exception stack trace ---
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<UpdateContextFromAuthenticationResponseAsync>d__c.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<AuthenticateAsync>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Management.Services.SelfServicePortal.ViewModels.ServiceLoginPageViewModel.<AuthenticateAsync>d__b.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Management.Services.SelfServicePortal.ViewModels.ServiceLoginPageViewModel.<AuthenticateWithExceptionHandlingAsync>d__6.MoveNext()
==========================================================
2014-10-30T17:44:57.6486693Z VERB
MethodLeave Common
1801 c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - DelayPolling() Leave
2014-10-30T17:44:57.6486693Z VERB
MethodEnter Common
1800 c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - CheckMonitoringCapable() Enter
2014-10-30T17:44:57.6486693Z INFO
Event None
0 'Microsoft.Management.Services.SelfServicePortal.Common.Portable.DataAccess.IApplicationsRepository' is not registered, monitoring is not capable.
2014-10-30T17:44:57.6486693Z VERB
MethodLeave Common
1801 c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - CheckMonitoringCapable() Leave
2014-10-30T17:44:57.6486693Z VERB
MethodEnter Common
1800 c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - DelayPolling() Enter
2014-10-30T17:44:57.6486693Z INFO
Event None
0 Attempting to delay polling task for '30' seconds.
==========================================================
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCMI just noticed the same. Looking at the following error message it seems to do a version check and based on the results of that check I would think that it's not supported yet.
System.ArgumentException: User agent string ("Mozilla/5.0 (Windows NT 6.4; Win64; x64; Trident/7.0; MSAuthHost/1.0; rv:11.0) like Gecko") does not contain match for Windows version regex pattern ("Windows NT (?<Version>6\.2|6\.3)").
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Computer is no longer authorized for apps installed on your iPhone
Does anyone else get a message that your computer is no longer authorized for apps installed on your iPhone? When I click "authorize" I get a message that "This computer is already authorized". But when I click ok, I get the first message again . . .
No. You must purchase them under your Apple ID. Anything purchased under someone else's Apple ID will present this same issue. You cannot share items in this way.
Give the above see the following:
Sharing Stuff From Different iTunes Accounts (or Computers)
Here's how to do so using different computers:
Transfer what content you want to the separate iTunes library on each computer. To transfer content from your library to another library do the following. We'll assume this is between husband and wife separate accounts and different Apple IDs.
Launch iTunes under your wife's login;
Sign her out of iTunes, then you sign in;
Select iTunes -> Preferences -> Devices -> Disable auto-sync when an iPod/iPhone is connected;
Connect your phone, DO NOT SYNC;
Select Store -> Authorize this Computer (only have to do this once);
Select File -> Transfer Purchases (all of the purchased content on your phone will be transferred to your wife's library);
When complete eject your phone, sign out of iTunes, sign your wife back in.
You can now sync whatever content you want to your wife's phone. Just remember all updates to apps obtained using your account must be done while signed in using your account: sign wife out, you sign in, update apps, you sign out, sign wife in, sync her phone.
This way you can share content (permitted under the EUSLA) and still maintain your separate logins. Do the same on your computer if you want to share content from your wife's library.
Just load whatever content you want to share on each others phones, transfer the content, then delete it from the respective phone if you don't want to keep it there.
Contributed by user wjosten and modified by me.
Maybe you are looking for
-
My Playlist only appear in the itunes when the ipod is connected , and I can not drag a song into a playlist, Also I repeatedly get a message to authorize the songs purchased in order to sync the ipod. I followed the instructions in the help menu on
-
Dear PM GURUS, First of all i thanks to all the PM gurus for giving the good solutions for my questions. I hope in future also i will get the same response from you people for my questions. In my business scenario, Maintenance people note down the p
-
External hard drive seen in Disk Utility, but will not mount.
My external hard drive has power and is spinning, but will not mount. It was fine yesterday. It shows up in Disk Utility and is verified and repaired. Tried the drive on 2 other macs with same result. Tried a new enclosure and that did not work.
-
Inconsistency in the Dictionary for the structure "MC02M_0ITM".
Hi Expert, we are applying ehp3 for ERP 6.0. I am getting the below abap dump DDIC_TYPE_INCONSISTENCY. Runtime Errors DDIC_TYPE_INCONSISTENCY Date and Time 29.08.2011 10:12:27 Short text Inconsistency in the Dictionary for the structure
-
Hello!! I made a program that reads data from an Arduino microprocessor. Once I realize the exe and connect Arduino, the program starts reading the data, but only for a few minutes ... then it stops and i have to disconnect and reconnect Arduino....a