Apps not opening after updating to 5.0.1.

After updating to 5.0.1, I cannot open almost all my apps!!! What do you suggest I do?

While on the Home screen double press the HOME button to open the Recently Used ribbon across the bottom of the screen. Hold a finger on any app until a "-" appears on all the apps, then tap the "-" on each to close it and free its memory.
If this does not resolve the problem go to the App Store and "purchase" any free app.

Similar Messages

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

This seems to be most common with lower resolution pictures. You can go into settings > general > accessibility and turn reduce motion motion off and then try to rescale. Or user a higher resolution picture, which works better with the new OS.

HT1338 Aperture will not open after update? What do I do?

Aperture will not open after I updated. What do I do?

Mgoss, quit the installer or App Store/Software Update (depending on what you're using to update) and restart your machine. With Aperture closed, drag the Aperture application to the trash, then reinstall Aperture from your original media and, if necessary, update again.

AS does not open after update

Cannot get adobe story to open after update (indeed there was difficulty before as well; it got worse after update). This applies to both offline and online. Even after a restart. All I get is a big, blank, black page, with no projects on it, not even the sample project. Any suggestions would be greatly appreciated. Thanks.
christophermark

Thanks, Ali.
I'm working on MacBookPro Intel with Snow Leopard, 10.6.5 using Firefox as
the browser. I have Chrome and Safari, but haven't tried them.
I updated Flash. I find AIR installer and uninstaller in
Applications>Utilities, but I can't find the AIR app anywhere. (So how was I
able to go online with AS in first place?) When I try to unintall AIR (with
the idea of reinstalling) it says that Adobe Story will no longer work
(should I proceed anyway?)
I've cleared the cache in Firefox, restarted AS, but the clearance had no
effect. Still get a blank, black page.
Thanks for trying to figure this out. Any other suggestions?
Christopher Mark

My apps will not open after updating to ios 5

My Iphone 4 will not open apps after updating to ios5.

If you search on google this is an old problem that many people have after upgrading devices and restoring from backups. If I can remember correctly, just re-sync the device in iTunes, and it should sort it out.

App will not open after update from market.

I have an android app that when I publish an update and the user downloads the update the app will not open. It opens for a second and then closes.
This happens even if I do not change anything in the update.
The only thing I can find is that after downloading the update I clear the cache and it works fine. My question is does anyone know why this might happen. Also is there a way to clear the cache at time of update.

ok i created a hello world app to try a nail down this issue.
i created the app with version 1.0.0
uploaded it to my server on the net.
hit the web address from my phone, downloaded and installed
then changed the version number to 1.0.1
uploaded this apk
downloaded and installed to phone
app would then open for sec then close
only fixable by clearing application cache.
I can't believe the answer to this problem is not available by googling it.
has no one else encountered this?
please help, i am scared to release any updates to my programs - massive influx of email from mad users who can not open there apps.

Apps not opening after 4.2 update

I performed the 4.2 update. It took about an hour and a half for it to go through. Everything was functional after the update. I turned my iPod Touch off last night after recharging. I turned it on this morning and none of my apps are opening. They are there, but none of them will load. Did anyone else have this issue? If so, were you able to reslove this? Also, can you give me the steps you did to get your iPod Touch apps back functional? This is the main reason I stopped doing the updates because I always had issues afterward. Please note, my last update was for 3.0.

If resetting fix it you are done.
If not then restore from backup
If still problems, restore to factory defaults/new iPod.
- Resetting does not delete items.
- Restoring from backup will leave you iPod like it was when the backup was made provided all your music and apps are in your iTunes library since music and songs are not in the backup but are synced to the iPod.
- Restoring to factory defaults/new iPod means it is like an new iPod and you will have to add (sync) stuff to the iPod.

App wont open after update???

My facebook wont open after latest update.. Wassup?

Hi kryptonmusic,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like an app you installed will not open. I would recommend that you read this article, it may be able to help the issue.
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Cheers,
Mario

Word documents located in a sparse bundle will not open after update to Lion

I have several files of Word documents created by Office for Mac 2008. These files are located in two different sparse bundles for security. One sparse bundle is the original. The second sparse bundle is a larger maximum size that I copied the original Word documents into. My plan was to delete the original after I confirmed that the second larger one worked. After updating to Lion, I also uninstalled Office for Mac 2008, and installed Office for Mac 2011. Now when I try to open these Word documents, I get a message saying that Word cannot not open these documents because they may be in use or may have unacceptable symbols in the file name. If I control click on the documents, I can see the document in Preview but still cannot open in Word. In addition, I am able to open Word documents that are on my desktop. I tried moving my folders out of the sparse bundles by copying them to the desktop but this did not work either.
Help with this problem would be greatly appreciated.

ok i created a hello world app to try a nail down this issue.
i created the app with version 1.0.0
uploaded it to my server on the net.
hit the web address from my phone, downloaded and installed
then changed the version number to 1.0.1
uploaded this apk
downloaded and installed to phone
app would then open for sec then close
only fixable by clearing application cache.
I can't believe the answer to this problem is not available by googling it.
has no one else encountered this?
please help, i am scared to release any updates to my programs - massive influx of email from mad users who can not open there apps.

Bridge will not open after update.

Adobe Updater did its update and now Bridge will not open. The message is:
The Application Bridge CS3 quit unexpectedly.
I have had to uninstall Photoshop, reinstall photoshop, and then all is well until the Adobe Updater gets going then bang! No more Bridge. The below is the first part of the Apple report.
Any ideas??? Im running 10.5.5 10gigs of ram, on a 8 core Mac.
Process: Bridge CS3 [405]
Path: /Applications/Adobe Bridge CS3/Bridge CS3.app/Contents/MacOS/Bridge CS3
Identifier: com.adobe.bridge2
Version: 2.1.1.9 (2.1.1.9)
Code Type: X86 (Native)
Parent Process: launchd [94]
Date/Time: 2008-10-08 15:53:31.578 -0700
OS Version: Mac OS X 10.5.5 (9F33)
Report Version: 6
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0

Routine maintenance is imperative.
I still advocate Repairing Permissions (with Apple's Disk Utility) before AND after any system update or upgrade, as well as before AND after installing any software that requires an installer that asks for your password.
I have seen software installations go sour because the installer did not find everything as and where it should be.
I have also seen software installations go bad because the installer did not clean up after itself properly and did not leave everything as and where it should be.
This is just my own personal opinion and practice based on my own observations. Others may disagree and that's OK. I can only base my routines and my advice to others on my own experience and conclusion. I don't pretend to know why others believe otherwise.
Repairing Permissions after the fact (i. e. not immediately before and after an install) seldom helps.; Try it anyway, though.
====
Additionally, if your machine does not run 24/7 so that it runs the daily, weekly and monthly Cron Scripts in the middle of the night as intended by Apple, run Cocktail (shareware) as well.
Cron Scripts are maintenance routines designed by Apple to run on a daily, weekly and monthly basis in the middle of the night.
If you don't run them, you WILL run into trouble, sooner rather than later.
Here's an excerpt from the Apple tech doc
http://docs.info.apple.com/article.html?artnum=107388
Mac OS X performs background maintenance tasks at certain times if the computer is not in sleep mode. If your computer is shut down or in sleep at the designated times, the maintenance does not occur. In that case, you may want or need to run these manually.
Mac OS X periodically runs background tasks that, in part, remove system files that are no longer needed. This includes purging older information from log files or deleting certain temporary items. These tasks do not run if the computer is shut down or in sleep mode. If the tasks do not run, it is possible that certain log files (such as system.log) may become very large.
Also, from:
http://docs.info.apple.com/article.html?artnum=106978
The disk activity generated by find is a normal part of file system maintenance, used for tasks such as removing invisible temporary files that are used by the system. It is scheduled to occur early in the morning at 03:15 everyday, 04:30 on Saturdays, and 05:30 on the first day of each month.
NOTE:
There have been comments to the effect that Apple "fixed" this in 10.4.2 and later versions of the OS, but I have not been able to verify this to my satisfaction. The reference in the 10.4.2 release notes are far from explicit on this subject.
= = =
If you have DiskWarrior, run it regularly too.

Apps wont open after update

Hi, My apps will not open on my iphone 4 after doing the io6 update today. Have tried getting new apps and rebooting, any ideas anyone.

Sorry to know but in any case you can't rollback the Firmware..
Did you try re-installing the Applications that are not working ? Because even if these were installed on Memory Card, they will lose any attributes that get automatically installed in the Phone memory during the resets that you have tried.
BTW you may try re-installing the Firmware thru' Nokia Software Updater.. but there is NO guarantee that it will go thru' without error.. but no harm trying also..

Browser is not opening after updating the os

Hi,
I am using 9300 curve.I have upgraded its os and after that I cannot open browser , have done everything but its not working could you please help me also my blackberry app world doesnt't open i always get a message that data services are not operational and for browser i got a message of uncaught exception please guide me.

Hello Arsala...
What method used to update the Blackberry
Erased the vendor.xml file when updated your BB.
If you want to use the browser remember to have data plan or BIS for you to browse ...
But your problem is that the browser does not open ...
At the time of the update not done correctly.
Apply Wipe, Wipe Factory Reset again and load the OS again either via Loader
Regards...
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Safari will not open after update

After I updated to Safari 4, the program will not open!
I get a message that tells me that OS X 10.5.8 is not compatible with this new version.
I have read other posts with similar questions, and tried to see if I could find a crash report that could tell me some more about this problem - but the latest crash report is a month old, and I did the update a few days ago.
Does anybody know what to do?

Go to your Hard drive icon (upper right corner)
OPen it and go to the Applications folder.
Open that, and go down to Utilities.
Double click the Disk Utility folder.
In the resulting window, select your HD icon on the left hand upper side.
Then click on "Repair Permissions."
It might take a little while if you've never done it.
If it says "Repair Permissions Complete"at the end, you're good to go.

Mail App Not Opening After Upgrading to Yosemite

I upgraded to Yosemite this morning from Mountain Lion. Everything seemed to go well until I clicked Mail for the first time. The migration process started, but the app never opened and will not open. I immediately get a crash dialog and that's it. I click reopen and get the dialog box saying, "The last time you opened Mail, it unexpectedly quite while reopening windows." I can do this over and over again. I've read the other threads, but they are not helping me.
This is the log created after it attempts to open:
11/20/14 12:45:23.286 PM sharingd[1035]: 12:45:23.286 : Stopping Handoff advertising
11/20/14 12:45:25.288 PM sharingd[1035]: 12:45:25.288 : Stopping Handoff advertising
11/20/14 12:45:28.039 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
11/20/14 12:45:28.082 PM bird[1037]: Assertion failed: ![_xpcClients containsObject:client]
11/20/14 12:45:28.083 PM bird[1037]: Assertion failed: ![_xpcClients containsObject:client]
11/20/14 12:45:28.091 PM bird[1037]: Assertion failed: ![_xpcClients containsObject:client]
11/20/14 12:45:29.706 PM Mail[1333]: *** Assertion failure in -[MFIMAPAccount mailboxForRelativePath:isFilesystemPath:create:], /SourceCache/Mail/Mail-1993/MailFramework/Accounts/MFMailAccount.m:4467
11/20/14 12:45:29.708 PM Mail[1333]: An uncaught exception was raised
11/20/14 12:45:29.709 PM Mail[1333]: Absolute path passed into -[MFIMAPAccount mailboxForRelativePath:isFilesystemPath:create:]: /Inbox/INBOX/Sent Messages
11/20/14 12:45:29.709 PM Mail[1333]: (
0   CoreFoundation                      0x00007fff8c70264c __exceptionPreprocess + 172
1   libobjc.A.dylib                     0x00007fff90a806de objc_exception_throw + 43
2   CoreFoundation                      0x00007fff8c70242a +[NSException raise:format:arguments:] + 106
3   Foundation                          0x00007fff86b5b5b9 -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 195
4   Mail                                0x00007fff8ce1bf5c -[MFMailAccount mailboxForRelativePath:isFilesystemPath:create:] + 251
5   Mail                                0x00007fff8cd79404 -[MFIMAPAccount mailboxForRelativePath:isFilesystemPath:create:] + 491
6   Mail                                0x00007fff8ce1d696 +[MFMailAccount mailboxForURL:forceCreation:syncableURL:] + 473
7   Mail                                0x00007fff8ce34168 __43+[MFMailbox queueUpdateCountsForMailboxes:]_block_invoke_2 + 68
8   CoreFoundation                      0x00007fff8c62cea6 __65-[__NSDictionaryM enumerateKeysAndObjectsWithOptions:usingBlock:]_block_invoke + 102
9   CoreFoundation                      0x00007fff8c62cdb9 -[__NSDictionaryM enumerateKeysAndObjectsWithOptions:usingBlock:] + 217
10 Mail                                0x00007fff8ce340b6 __43+[MFMailbox queueUpdateCountsForMailboxes:]_block_invoke + 275
11 Foundation                          0x00007fff86ba52e8 __NSBLOCKOPERATION_IS_CALLING_OUT_TO_A_BLOCK__ + 7
12 Foundation                          0x00007fff86a91905 -[NSBlockOperation main] + 97
13 Foundation                          0x00007fff86a7059c -[__NSOperationInternal _start:] + 653
14 Foundation                          0x00007fff86a701a3 __NSOQSchedule_f + 184
15 libdispatch.dylib                   0x00007fff86032c13 _dispatch_client_callout + 8
16 libdispatch.dylib                   0x00007fff86036365 _dispatch_queue_drain + 1100
17 libdispatch.dylib                   0x00007fff86037ecc _dispatch_queue_invoke + 202
18 libdispatch.dylib                   0x00007fff860356b7 _dispatch_root_queue_drain + 463
19 libdispatch.dylib                   0x00007fff86043fe4 _dispatch_worker_thread3 + 91
20 libsystem_pthread.dylib             0x00007fff92efc6cb _pthread_wqthread + 729
21 libsystem_pthread.dylib             0x00007fff92efa4a1 start_wqthread + 13
11/20/14 12:45:29.709 PM Mail[1333]: *** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Absolute path passed into -[MFIMAPAccount mailboxForRelativePath:isFilesystemPath:create:]: /Inbox/INBOX/Sent Messages'
*** First throw call stack:
0   CoreFoundation                      0x00007fff8c70264c __exceptionPreprocess + 172
1   libobjc.A.dylib                     0x00007fff90a806de objc_exception_throw + 43
2   CoreFoundation                      0x00007fff8c70242a +[NSException raise:format:arguments:] + 106
3   Foundation                          0x00007fff86b5b5b9 -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 195
4   Mail                                0x00007fff8ce1bf5c -[MFMailAccount mailboxForRelativePath:isFilesystemPath:create:] + 251
5   Mail                                0x00007fff8cd79404 -[MFIMAPAccount mailboxForRelativePath:isFilesystemPath:create:] + 491
6   Mail                                0x00007fff8ce1d696 +[MFMailAccount mailboxForURL:forceCreation:syncableURL:] + 473
7   Mail                                0x00007fff8ce34168 __43+[MFMailbox queueUpdateCountsForMailboxes:]_block_invoke_2 + 68
8   CoreFoundation                      0x00007fff8c62cea6 __65-[__NSDictionaryM enumerateKeysAndObjectsWithOptions:usingBlock:]_block_invoke + 102
9   CoreFoundation                      0x00007fff8c62cdb9 -[__NSDictionaryM enumerateKeysAndObjectsWithOptions:usingBlock:] + 217
10 Mail                                0x00007fff8ce340b6 __43+[MFMailbox queueUpdateCountsForMailboxes:]_block_invoke + 275
11 Foundation                          0x00007fff86ba52e8 __NSBLOCKOPERATION_IS_CALLING_OUT_TO_A_BLOCK__ + 7
12 Foundation                          0x00007fff86a91905 -[NSBlockOperation main] + 97
13 Foundation                          0x00007fff86a7059c -[__NSOperationInternal _start:] + 653
14 Foundation                          0x00007fff86a701a3 __NSOQSchedule_f + 184
15 libdispatch.dylib                   0x00007fff86032c13 _dispatch_client_callout + 8
16 libdispatch.dylib                   0x00007fff86036365 _dispatch_queue_drain + 1100
17 libdispatch.dylib                   0x00007fff86037ecc _dispatch_queue_invoke + 202
18 libdispatch.dylib                   0x00007fff860356b7 _dispatch_root_queue_drain + 463
19 libdispatch.dylib                   0x00007fff86043fe4 _dispatch_worker_thread3 + 91
20 libsystem_pthread.dylib             0x00007fff92efc6cb _pthread_wqthread + 729
21 libsystem_pthread.dylib             0x00007fff92efa4a1 start_wqthread + 13

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Apps not opening after updating to 5.0.1.

Similar Messages

Maybe you are looking for