Apps not showing as updated

My First GeniPad had problems syncing.  It stayed at Step 1, backing upiPad for over three hoursand would not continue. My iTunes is on a Windows PCrunning XP.
I previously created a backup with noapparent problem and updated to OS 4.33. But then I noticed that none of my pdffiles were in iBooks. They showed on iTunes so I tried to sync.
Update on issue:  I finally got it to sync, but there is a new problem. Some apps did not show after sync. I noticed that some were not checked off on iTunes even though Ihad selected the option to automatically sync new apps.
I generally add new apps directly from the iPad, notpurchasing through iTunes and then syncing. I went back, checked apps andsynced again.
Now, when I go to the iPad, it shows a number of the apps need updating, even though I had previously updated them directly on the iPad. Most of these apps needing update do not show the latest date for the app "update" to be installed, but show 2010 dates.
Did I miss a step? Are apps still not quite in sync? Is there an option I missed somewhere?

I tried a reset, but it did not help.
Oddly enough, I am now showing about 17 apps that "need" updating, and only one notice actually represents a new revision to an app.  For all the others, dates as far back as 2009 show for apps to be updated.

Similar Messages

  • Software Updates app not showing new updates

    Hi,
    The Software Updates app is not showing new updates. I always get "No Updates Available".  For instance, I run 10.8.3 but 10.8.4 is not showing up. I run iTunes 10.0.2 and when I open it  I get messages asking me to update to newer versions but they are never showing up in the Software Updates app. I played with the Software Updates app preference files but it did not change anything. Any idea on why the Software Updates app is not working properly.
    Thanks

    Read this whole message before doing anything.
    Back up all data. Quit the App Store application if it’s running. Test after each of the following steps until the problem is resolved.
    Step 1
    Triple-click the line below to select it:
    /Library/Updates
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu. A Finder window should open with a folder selected. Move the contents of the selected folder to the Trash. You may be prompted for your administrator password.
    Step 2
    Do as in Step 1 with this line:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    If there's no change, quit the App Store and restore the file you moved from your backup, overwriting the one that may have been created in its place. Otherwise, recreate your settings in the Software Update preference pane.
    Step 3
    Hold down the option key and select
    Go ▹ Library
    from the Finder menu bar. Move the following items from the Library folder to the Trash (some may not exist):
    Caches/com.apple.SoftwareUpdate
    Preferences/com.apple.SoftwareUpdate.plist
    Preferences/ByHost/com.apple.SoftwareUpdate.*.plist
    Saved Application State/com.apple.SoftwareUpdate.savedState
    Here, "*" stand for a long string of letters, numbers, and dashes.
    Step 4
    If you still have problems, quit the App Store again.
    Triple-click anywhere in the line below to select it:
    open $TMPDIR../C
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). A folder should open. Inside that folder, there may be a subfolder with the name "com.apple.SoftwareUpdate". If so, delete it. You can then quit Terminal.

  • Apps not showing since update on 8-26-08

    I synced my phone and i lost good programs i paid for. What can i do to get them back? HELP

       no replies / solutions......

  • TS3274 My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.

    My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.

    Many people are having this problem for the last couple of days. This is a problem that Apple has to fix. If you look around the forum, you will see many, many discusssions about this and they have been going on for a few days.
    According to Fly150 in another discussion, this is a workaround - for the time being.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    This should update the Apps and get rid of the update count in App Store.

  • HT1338 The Mac App Store shows an update available for iMovie but when I click "update" it gives me this message, "The product distribution file could not be verified. It may be damaged or was not signed." What can I do to update this program?

    The Mac App Store shows an update available for iMovie but when I click "update" it gives me this message, "The product distribution file could not be verified. It may be damaged or was not signed." What can I do to update this program?

    http://www.apple.com/support/mac/app-store/contact.html?form=account

  • App store shows new update for program I did not purchase

    App store shows new update for program I did not purchase. This is "CodeBox". When I push button to download update it shows "uknown error". For normal other updates - "update all" not working anymore.
    How to delete this line from updates section now.

    The problem was finally solved. I am writing very simple solution for those who may have same issue. I tried 1st solution proposing to exclude HDD from Spotlight search and then to restore it (delete from exceptions). It worked for some time and removed notification, however later it appeared again. Then I has started thinking that it was caused by data inside some installed SW and it has been proved later. I have started excluding from Sportlight not all HDD but by folder, searching for the problem area. I have discovered that folder Games was causing the issue. Then I have started to delete installed games one by one and have found Game with was triggering this notification (for other SW!). Problem was fixed after deleting this game. Other deleted games could be easily restored from recycle been.

  • IOS 7 App Store showing old updates / showing updates and not letting me install

    I noticed two issues with the iOS 7 App Store starting last night.  I'm not sure if it's a temporary issue, since the issue seems to be server-side on Apple's part, or if it's a long-term issue. 
    I am running iOS 7.0.2 on an iPhone 5s.  I do not have automatic updates for apps turned on (I like checking what an app is updating before installing it).  I have tried force quitting the App Store app and restarted my iPhone.
    The first thing I noticed last night was that the App Store showed an update for Hulu Plus on my iPhone but wouldn't let me install it.  On my iPad (3rd-gen) running iOS 7, it let me install it.  This morning, it let me install it.  After, I noticed another badge on my App Store app icon with a "1", and it said there was an update for 94 Seconds, but wouldn't let me install it either.  Then when I expanded the details, I noticed the date on it was from July 30, 2013.  I already had that update installed over 2 months ago.  Screenshots for that issue are below.
    Is anhyone else experiencing anything similar?  Any solutions?

    Thanks for the quick response.
    I do indeed seem to recall that happening with an app previously. 
    However, this time it was two apps (Google and Tivo).  I figured they'd get flushed out when more updates (for other apps) hit the App Store. However, when that happened just now, while it did show "update" for those old updates instead of "open", I could not select "update all" up top and had to press update next to each of the (now 4) apps.  The real issue though is that it (of course) can't further update Google and Tivo and gets stuck.  So I can't update any of my apps now.
    When I went back into App Store I then got the blank screen that shows nothing under updates but the "Purchased" slider up top.  I thus had to reboot.  I can get back into the App Store, and got an error regarding the Tivo update not being available (this was a Jan 10 or so update that had already been installed), but there it still sits in the updates.  Interestingly, Google did "update" and fall off the badge indicator.  I selected only my true/new updates, so now I'm just stuck with a false Tivo update/badge.
    I should add that I am on 7.0.4.
    EDIT: Tivo "updated" after the reboot too.  So, bottom line is that you're (I'm) stuck with the false updates until a real update comes through, and then I have to go through that song and dance to clear out the false flags.

  • My app store will not show the update page. Any suggestions?

    My app store app will not show the update page. Any suggestions?

    You haven't told us which version of iOS you're running.
    Anyway, is it restricted?  Check Settings > General > Restrictions

  • App Store shows Twitter update again and again

    Hello boys and girls.
    My Mac App Store shows the update 2.0.1 for Twitter again and again. I downloaded it 10 times again and it didn´t go away. Twitter is on 2.0.1 and the MAS shows the update again.On my iMac there wasn´t a problem with this update.
    Sorry for my bad english skills. I´m a german guy. I hope you understand my problem.
    Regards
    m1LLo

    Without the Twitter app installed the Mac App Store continues to display Twitter as being available to receive an update — this to me sounds like Cached information that is corrupt.
    Are you certain that you removed the following files:
    Remove all files in the Caches folder from the following 2 locations:
    Macintosh HD/Library/Caches
    System/Library/Caches
    You might even want to remove Caches from your home folder but I am certain it's not there because the App Store is a system wide applications and it install app into the Applications folder which is also system wide. As an addendum to this, I am also convinced that if you log into another user account on your mac you will continue to see this update offered.
    Also remove
    ~/Library/Caches
    You must restart your mac immediately afterward. There is no point attempting to empty the trash because these cache files are likely active.
    Please confirm

  • Apps menu shows 5 updates available, but when I go to download them it says none are available

    apps menu shows 5 updates available, but when I go to download them it says none are available.  How do I remove that number?

    Get some apps from someone else, perhaps? You can check by doing a "Get Info" on your apps; that will show the account under which they were purchased.
    Oh, and just to clarify so I'm not barking up the wrong tree, what exactly is iTunes saying? Is it showing the number in the icon indicating that there are five apps to be updated but showing the screen that says "No updates are currently available"? Or is it giving an error message somethign like "the item you requested is not available in the iTunes Store"?
    Message was edited by: varjak paw

  • Problem with new version 4.3.2 apps not working " after update to the new version "

    Problem with new version 4.3.2 apps not working " after update to the new version "
    i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

    Hi There
    Had the same problem as you. App would terminate when launched.
    Solution to working You Tube app:
    -Go to playstore
    - Uninstall app (it doesn't remove the app, only removes the update)
    - "Et Voila", working again.
    This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
    Hope it helped.
    Best Regards

  • My 4s wa showing update to iso7 so I updated and it kept failing now its not showing an update at all and saying my iPhone 4S is up todate on USO 6.1.3 help???

    My 4s wa showing update to iso7 so I updated and it kept failing now its not showing an update at all and saying my iPhone 4S is up todate on USO 6.1.3 help???

    Now it's not showing any update on my phone Iv turne it off and bk on again but still saying software is up to date on 6.1.3

  • Apps not showing in notification settings

    I just bought my iPhone 6 two days ago. Running IOS 8.1.2
    Why is some of my apps not showing in the notification settings.
    Downloaded 15 games only 10 showing in the notification settings.
    When I first download the apps and run it. It does not pop out any request to allow notification.

    Is it the same apps or do they change? If it the same ones - it may be a developer issue
    Do you know if an app that is not showing in the notification center of your phone shows up on someone else's iphone notification center?

  • HT201272 purchased app not showing up in iPhone

    Purchased DevonThink To Go 07/31/12.
    Since then had to reset iphone & reinstall Mountain Lion.
    Now app not showing up in om Iphone as purchased. Others are but NOT Devonthink To Go.
    Have done what was suggested but no luck.
    Have the email receipt of purchase but no links to DL.
    Any help appreciated.
    Gary Sawyers

    If they were purchased using a different Apple ID than the one your phone is signed in to in Settings>iTunes & App Stores they won't appear until you sign into the other ID.  They also won't appear if they are no longer available in the app store.

  • HFM and Planning apps not showing up in workspace..

    Hi All
    We recently had the SSL certificate expired and after we renewed them, and restarted all the services, the HFM and Planning apps are not showing up in workspace Navigate->Applications. When I click on Classic Administration -> Consolidation Administration or Planning Administration , I get the following error.
    "Please make sure that the Application you are trying to launch is registered with SharedServices.Shared Services must be running for the feature you are trying to access.Close the current browser window and try logging into workspace again after a little while.Contact your administrator for further information."
    I also cannot open the HFM app in "Projects" in HSS, but can open Planning apps. ( not sure if that helps)
    I m able to open the Planning and HFM apps using the Direct links, (not through workspace) and able to login and perform any task with in the application.
    The issue looks more like workspace is not able to communicate with Foundation or shared services.
    Can you tell me what would be the reason for apps not showing up in the Workspace and a possible resolution?
    Thanks in Advance.
    Raghu.

    Hi Raghu,
    I'm faced with the same problem.
    If you have managed tor resolve the same, please help me with the solution.
    Regards,
    Apo

Maybe you are looking for

  • IS IT POSSIBLE TO CREATE A PO WITHOUT PLANT

    HELLO EXPERTS, I have following business scenario,, for a material X , price for plant A is 20 rupees and for other plant 25 rupees. I have created one info record for that . PLANT SPECIFIC INFO RECORD (plant A) 20 rupees INFO RECORD (WITHOUT ANY PLA

  • [SOLVED] GDM + Openbox Keyring problems

    Hi people. Well, I am using two parallel WMs: Gnome 3 (gnome-shell) and OpenBox. As a login manager I use GDM (the one that came with Gnome 3). When I login to Gnome 3 session, everything is OK. But when I switch to OpenBox session through GDM, keyri

  • Passing report name as report title

    Using Desktop Publisher for Word and a standalone BIP Enterprise version, is it possible to pass the report name to the rtf template so that it could be used as the report title? This feature would be useful when there are multiple reports (different

  • How to connect 2 computer in LabVIEW?

    Hi, I currently trying to send an input that I put from computer A to be output in computer B. I read that I need a shared variable for it, and I already set the shared variable. My main problem now is how to establish a connection/communication to t

  • Bex Trigger variable

    Hi All could you let me know about the trigger variable in Bex. How it is created and does it is similar to characteristic variable.? Thanks in advance. Regards, Megha