Apps not working after 2.0.1 update

After installing the new update when I try to use any of the apps I downloaded they open for a second and then close right away and return back to the app screen. Is this because of the update? anybody else experiencing this?

Hi,
I had the same problem, solved 'buying' a free app from AppStore directly from the iPhone, via wifi.
Hope this helps...

Similar Messages

Kindle Reading App not working after 10.9.5 update

After update to 10.9.5 Kindle reading app is not opening. Anyone else having this problem?
Even uninstall/install wont work.

Just saw that it was able changing the location of your store even without providing CC information.
Now that I'm on US I downloaded with success the kindle app and it work normally.
Thanks.

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

Illustrator tools dropdown is not working after the recent software update

My Illustrator tools dropdown is not working after the recent software update. Any help would much appreciate.

Same problem here. I have a Mac with a recent Yosemite update.

Many apps not working after upgrade

I have a lot of apps not working after upgrade even apple's remote, splash id etc... Anyone else or is it just me?

I had trouble with MPR, but since it's free, I just deleted it and reloaded it directly from the App store onto the phone. It had an upgrade, too, that must have clashed with the 2.2 upgrade. Once I did the download, it was fine.

Home button not working after 5.0.1 update

Ok now the home button not working after 5.0.1 update. Anyone have any ideas? How do I roll backfrom this update?

This happened to me as well. AT&T had me reset my network settings and this fixed the problem. Here is how...
Settings > General > Reset > Reset Network Settings
"For now" the problem is fixed for me.

Camera App not working after update to iOS 7.1.1 on iPhone4

Hi Guys,
I have recently downloaded iOS7.1.1 ipsw from the apple website for the correct version of my iphone4 [GSM] and updated my phone.
The camera app is now not responsing at all and i dont even see a picture in the camera app. I tried the update again and found that the problem is still evident.
Please let me know if we share the same problem and also any solution if you come across.
Regards,
Sheikh M

Updating to iOS 7.1.2 doesnt solving problem at all, even my front camera also begin not working after I did that. Everything's OK when I using rear cam, but just freeze and blurred on screen while switched to the front cam. And have to resetting to go back to rear cam. My iPhone4's camera itself, rear and front, are in good performance before. And I've tried anything such as reset, hard reset, restoring, setting up as new device, etc, without any result since then. If some people say it was about hardware issued, I thing so weird because too many same hardware problems coincident happened at the same moment. So I just only hope the Apple will listening and solving all problems wisely. Thanks b4.

Ipad camera app not working after update 7.1.1 and using skype on video call

Hello,
i updated my mini ipad to ios 7.1.1
then i used skype for video call...
It worked fine for a few minutes then the front camera stopped working
Stopping skype and starting the camera app, i saw that the front camera was no more working...black screen
instead rear camera was working...
Then i tried to reset the device (pressing sleep and home button) and uninstalled skype
Now front camera works more or less, but the camera app seems always almost freezed, i cant change easily the options,
i cant record a video, only camera for snapshots is working...
any suggestion?
is it possible to uninstall the camera app and try to reinstall it?
Thanks!

Updating to iOS 7.1.2 doesnt solving problem at all, even my front camera also begin not working after I did that. Everything's OK when I using rear cam, but just freeze and blurred on screen while switched to the front cam. And have to resetting to go back to rear cam. My iPhone4's camera itself, rear and front, are in good performance before. And I've tried anything such as reset, hard reset, restoring, setting up as new device, etc, without any result since then. If some people say it was about hardware issued, I thing so weird because too many same hardware problems coincident happened at the same moment. So I just only hope the Apple will listening and solving all problems wisely. Thanks b4.

IPod touch not working after 5.0.1iOS update

It seems like a lot of people are having issues after the new 5.0.1iOS update. I want to share my frustration and what problems I'm facing. After the update my ipod won't sync properly. It freezes my computer and then my computer shuts down everytime I have my ipod connected to my computer. My music and apps on my iPod are like ghosts they are visible but do NOT work after being pressed. I tried resetting the ipod, same problem. I uninstalled and reinstalled iTunes, same problem. There is only problems with my computer when the iPod is plugged into the computer and trying to update. I am so ANGRY because I love my iPod and I can't use it to listen to music or communicate with my family and friends. I hope Apple will help all of us soon and fix these HUGE bugs, and FAST.

Have you tried the sandard fixes:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Retore from backup
- Restore to factory defaults/new iPod.

Touch ID not working after IOS 7.1 update

Touch ID will not work after the recent update, rebooted iphone to no avail. I then deleted all finger prints, but iphone will not recognise new fingerprints ..... Annoyed is not the word ! Any ideas ?

I'm like, Touch ID almost dead, we're going apple fixex this.
Seems it only is affecting the white model

My iPad orientation is not working after the IOS 8 update. Please fix this bug!

my iPad air orientation is not working after the IOS8 update. Can you fix this bug? Thx

Did you try a reset?
Restart / Reset
http://support.apple.com/kb/HT1430

Drobo not working after 10.5.8 update

My drobo stopped working after 10.5.8 update. Now I lost all my data on the drobo. this doesn't make me happy.

'We are using the USB interface (as opposed to firewire) because we want to share the drive across the network - it's not always about speed.'
This makes absolutely no sense to me.. but maybe I am wrong : Because firewire is much more reliable than USB and manages to keep highest transfer rates (without jumping up and down as USB would do as soon as I/Os go up...) Especially on a Mac ! (only for the latency I am not too sure, but I guess it is similar on fw and USB.. just increase the caching if you stream hd movies on the network...
From my experience, sharing a USB drive on the network is probably much worse.. you can find example on the web.. (Orb, Plex and else will start drop frames when connecting to a USB shared drive.)
I currently use my drobo plugged to my Mini with a fw800 to 400 cable,4*1.5tb hdds, I also share it on the network with gigabit ethernet, and get much better performances than any usb shared drive.
Sorry I do not have any precize measurement, but I can upload or download a 6tb file in about 10minutes over gigabit ethernet, and I guess the bottleneck is now the Drobo controller...
The protocol you use may have an impact as well (afp, smb,...) but whatever you use, I suppose Firewire will be faster.
As a general advice, do not update or upgrade anything in general before you have a backup of your data, this is true for any storage system, Drobo or not.
Oh, and Data redundancy on a raid is not a backup of course.
Vincent
Message was edited by: v1ncen7

External monitor Syncmaster 2494SW not working after 10.6.7 update

External monitor Samsung Syncmaster 2494 SW stopped working after 10.6.7 update on 2011 MacBook Pro. I'm using miniDP-DVI adapter. The monitor shown correctly in Display Properties with right modes and name. MackBook recognizes connection but the monitor goes to PowerSave mode (LED indicator blinks).
Safemode boot, SMC reset, PRAM reset did not help.
Exactly the same setup works perfectly under 10.6.6.

HERE IS THE EASY FIX SOLUTION FOR THIS PROBLEM GUYS:
I have an 15inch MacBook Pro that I've just installed Snow Leopard 10.6.3 on.
Prior to this install, I've had it hooked up to my Samsung SyncMaster 2243 via an Apple MDP/VGA adapter and a third party VGA cable. It has been flashing on and off a black screen every now and then for the past 2 years and I googled that it was just a crappy communication between the MBP and the Samsung... but now since installing 10.6.3, the Samsung display just flashes the desktop for a second then turns black for good - occationally flashing analogue/digtal prompt display. Tried everything for hours. Nothing worked, thought I was gonna have to buy a new all Apple VGA lead then came across Michael's above solution. Tried it and it worked IMMEDIATLY!!! And the monitor doesn't flash black anymore AT ALL!! Whoo-hoo!! Thanks heaps.
WHAT TO DO TO FIX:
Go to => System Preferences => Energy Saver => change graphic settings to Higher Performace.
Cheers!!

Trackpad not working after 10.8.4 update

Macbook Pro with Retina Display late 2012. Trackpad clicking function stopped working after 10.8.4 update. Any advice? I've tried zapping the pram, resetting the smc. Nothing helps.

Apple store genius bar appointment is the best option for a positive resolution.
Ciao.

My Verizon app not working after iOS 7 update

I have an iphone 4s. After I upgraded to ios 7, the my verizon app stopped working. Today, the app got an update in the app store to version 3.6.0. I installed the update, but it still does not work. When I run it, it spins the circle dots for a while and comes back with "Error: A communication error has occured [sic]. Please ensure Internet connection and try again." And it has a "Reload App" button, which I press, and it does the same thing. This happens whether I'm on wifi or 3g. Several times I've tried rebooting the phone, deleting and reinstalling the my verizon app, but it still doesn't work. Does anyone else have this problem? How did you solve it? Thanks.

I did the network reset, but that didn't help. FYI if you're thinking of resetting network settings, the only negative side-effect is that the phone forgets all of its wifi networks.
I did a restore from backup via iTunes, and that didn't help either.
I've had a couple other issues with iOS 7, and what I did was reset the firmware via iTunes but I didn't restore from backup. Now My Verizon works. The reason I did this drastic step was because my Safari was messed up in iOS 7 in another way, and restoring from backup didn't help that either, but I had a hunch that getting Safari fixed would fix My Verizon. (I can't know for sure if I was right about that.)
Here's the thing: Apps like My Verizon that really just load web pages use Safari's settings for the web. So I would try this if I were still stuck with My Verizon not working: Go into Safari settings, and clear cookies and history and cache data, and make sure the "Block Cookies" setting is set to either "Never" or "From third parties and advertisers." Then reboot your phone for good measure, and try My Verizon again.

Apps not working after 2.0.1 update

Similar Messages

Maybe you are looking for