Apps not working after Apple ID updated

Contact, Calendar, Reminder, Maps, App Store, Textedit, etc... bounce but not open after clicked.
All apps working fine after installed OSX Mavericks, before Apple ID updated.

Contact, Calendar, Reminder, Maps, App Store, Textedit, etc... bounce but not open after clicked.
All apps working fine after installed OSX Mavericks, before Apple ID updated.

Similar Messages

  • My Verizon app not working after iOS 7 update

    I have an iphone 4s.  After I upgraded to ios 7, the my verizon app stopped working.  Today, the app got an update in the app store to version 3.6.0.  I installed the update, but it still does not work.  When I run it, it spins the circle dots for a while and comes back with "Error: A communication error has occured [sic]. Please ensure Internet connection and try again."  And it has a "Reload App" button, which I press, and it does the same thing.  This happens whether I'm on wifi or 3g.  Several times I've tried rebooting the phone, deleting and reinstalling the my verizon app, but it still doesn't work.  Does anyone else have this problem?  How did you solve it?  Thanks.

    I did the network reset, but that didn't help.  FYI if you're thinking of resetting network settings, the only negative side-effect is that the phone forgets all of its wifi networks.
    I did a restore from backup via iTunes, and that didn't help either.
    I've had a couple other issues with iOS 7, and what I did was reset the firmware via iTunes but I didn't restore from backup.  Now My Verizon works.  The reason I did this drastic step was because my Safari was messed up in iOS 7 in another way, and restoring from backup didn't help that either, but I had a hunch that getting Safari fixed would fix My Verizon.  (I can't know for sure if I was right about that.)
    Here's the thing:  Apps like My Verizon that really just load web pages use Safari's settings for the web. So I would try this if I were still stuck with My Verizon not working: Go into Safari settings, and clear cookies and history and cache data, and make sure the "Block Cookies" setting is set to either "Never" or "From third parties and advertisers."  Then reboot your phone for good measure, and try My Verizon again.

  • 3rd Party Apps not working after 3.1 update

    As the topic says, none of my third party apps are working at the moment. I tried doing a full restore and backup and that doesn't seem to do anything. I've also noticed that most of my music is not syncing, even though podcasts and movies are. I'm really trying to restore everything to the way it was because I have some valuable data on my third party apps that I really can't afford to lose.
    Any ideas?

    Same problem.
    iPhone 3gs 32MB and MacBook Pro w/ iTunes 9.0: Updated iPhone to 3.1 software today and all apps fail at launch except the native ones. Thinking it was an authorization problem, I tried to purchase an app on the phone. It downloads but also won't launch. I then bought it through iTunes 9.0 and synced, but that fails as well. Did a full restore, and one hour of sync time later no change.
    If this is happening to me it must be pretty common. I'm using all standard equipment that is under a year old. No jailbreak or other funky stuff. Anyone else with this problem please post. Not sure what else to do. Genius bar appts are booked up today, so booking for tomorrow night.

  • Apps not working after iOS 5 update

    My friend has updated his iPhone 4 to iOS 5 and some of his apps including facebook and twitter aren't working. Tried re-syncing and turning off and on but still not working. Any suggestions?

    Not my issue. Many apps do update fine. 5 pesky ones are being difficult and refuse to update. Tried on various wifi networks with same result. Other applications do update. All the latest as far as iOS is concerned although sadly I am still using an iPad 2.
    What is the same is only that a number of my applications in the App Store fail to update on my iPad 2.

  • Airport not working after Apple sw updates - HELP PLEASE!!!

    I have a newish MAC Intel. The Airport was working fine for the last 9 months or so until I puled down Apples usual sw updates. I did them all incl the firmware update. Now the Airport wont hook up. I have wireless to NETGEAR router downstairs. I see network broadcasting as its sen in networks box, yet when I select it and then plug in a WEP and connect it says no can do and jumps back to no network selected. Ive tried this dzens and dozens of times. Lke I said was fine for last 9 months until updates last week...grrrhh.can anyon help me please?
    thanks
    ./david
    PS ot sure what OS I have..never checked to be honest
    INTEL iMAC   Mac OS X (10.4.8)  

    Hi David,
    sunny in Scotland right now ?? (Sorry, just joking)
    Have the same one and came to the conclusion that Airport doesn't wait for the DHCP from the Netgear to get a numer like 192.168.xxx.xxx but has already one which is not in the pool provided by the Netgear.
    Since I'm depending on this I help myself by turning Airport off (in the Menu) wait 20 seconds and then turn it on again.
    Helps every time.
    Another guy round here has helped himself by turning off the Automatic (in the Airport preferences) and has entered all numbers manually.
    Regards
    Stefan

  • Problem with new version 4.3.2 apps not working " after update to the new version "

    Problem with new version 4.3.2 apps not working " after update to the new version "
    i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

    Hi There
    Had the same problem as you. App would terminate when launched.
    Solution to working You Tube app:
    -Go to playstore
    - Uninstall app (it doesn't remove the app, only removes the update)
    - "Et Voila", working again.
    This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
    Hope it helped.
    Best Regards

  • Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Hi Tokha,
    If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article - 
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

    Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

    OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
    Go figure? Logical, No!

  • My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    - Try resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Download/install a new app
    - Restore from backup
    - Restore to factory daults/new iPod.

  • Wifi not working after latest iOS update

    wif not working after latest iOS update 7.0.4.  Any suggestions?

    Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

  • HT201366 CAC readers not working after installing security update 2013-003?

    Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

    For CAC issues, see:
    MilitaryCAC's Mac OS X support landing page
    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • Many apps not working after upgrade

    I have a lot of apps not working after upgrade even apple's remote, splash id etc... Anyone else or is it just me?

    I had trouble with MPR, but since it's free, I just deleted it and reloaded it directly from the App store onto the phone. It had an upgrade, too, that must have clashed with the 2.2 upgrade. Once I did the download, it was fine.

  • Camera App not working after update to iOS 7.1.1 on iPhone4

    Hi Guys,
    I have recently downloaded iOS7.1.1 ipsw from the apple website for the correct version of my iphone4 [GSM] and updated my phone.
    The camera app is now not responsing at all and i dont even see a picture in the camera app. I tried the update again and found that the problem is still evident.
    Please let me know if we share the same problem and also any solution if you come across.
    Regards,
    Sheikh M

    Updating to iOS 7.1.2 doesnt solving problem at all, even my front camera also begin not working after I did that. Everything's OK when I using rear cam, but just freeze and blurred on screen while switched to the front cam. And have to resetting to go back to rear cam. My iPhone4's camera itself, rear and front, are in good performance before. And I've tried anything such as reset, hard reset, restoring, setting up as new device, etc, without any result since then. If some people say it was about hardware issued, I thing so weird because too many same hardware problems coincident happened at the same moment. So I just only hope the Apple will listening and solving all problems wisely. Thanks b4.

  • Ipad camera app not working after update 7.1.1 and using skype on video call

    Hello,
    i updated my mini ipad to ios 7.1.1
    then i used skype for video call...
    It worked fine for a few minutes then the front camera stopped working
    Stopping skype and starting the camera app, i saw that the front camera was no more working...black screen
    instead rear camera was working...
    Then i tried to reset the device (pressing sleep and home button) and uninstalled skype
    Now front camera works more or less, but the camera app seems always almost freezed, i cant change easily the options,
    i cant record a video, only camera for snapshots is working...
    any suggestion?
    is it possible to uninstall the camera app and try to reinstall it?
    Thanks!

    Updating to iOS 7.1.2 doesnt solving problem at all, even my front camera also begin not working after I did that. Everything's OK when I using rear cam, but just freeze and blurred on screen while switched to the front cam. And have to resetting to go back to rear cam. My iPhone4's camera itself, rear and front, are in good performance before. And I've tried anything such as reset, hard reset, restoring, setting up as new device, etc, without any result since then. If some people say it was about hardware issued, I thing so weird because too many same hardware problems coincident happened at the same moment. So I just only hope the Apple will listening and solving all problems wisely. Thanks b4.

  • Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

    My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

    The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
    http://support.apple.com/kb/HT4367

Maybe you are looking for