Apps open and then shut down right away
Most of my apps will open but then they shut down right away....any thoughts? I did reboot
Thanks....I had 4 app updates and ran them and it resolved the problem.
Similar Messages
-
I have a mac OS X and when I close it and reopen my screen opens and then shuts down for an instant and then reopens. Does anyone have this occur?? I have shutdown and restarted often.
A Safe Mode boot might help ..
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu.
See if the problem persists. -
When I try to open viber app on ipad1 it shuts down right away
Whenever I try to open the viber app on my iphone 1 it shuts down right away I just get a white starting screen and then shutdown I tried to remove it and download it back I even reset my whole Ipad but still doesnt work!
go into the settings->app & itunes store
and make sure the appleID is set to the one the app was bought/ downloaded with -
Hello
I was having some problems with my Imac, for a while it was slow and often disconneceted from my wifi, while this one worked perfectly (tested with other devices)
I thoug i might have a virus, so i downloaded an antivirus (mac keeper) and started checking.
I also did a scan of my computer using Console or something from the utilities, and then a folder popped witha file I had canceled a while ago. I canceled the file and then my Imac continued to be slow.
i then restarted my Imac, but when it started, the usual grey logo of Apple appeared, and then it shut down suddently.
I tried to reboot it holding the command key and R but nothing, and then i tried holding the shift key and a bar appeared, and at half of the bar it sut itself down again.
I think it is probably a preoblem because I may have cancelled some of the system files from a folder called "private" in the "documents" folder.
Is there any way I can recover some of my files? maybe all of them? I hope so because I have some important files there
Is this a thing I can do myself or do Ineed to go to a MacStore to repair it? Will I need to change HD or just to format it and reinstall? also if there is any way i can recover some of my files that would be great.
Thanks
Ludo
P.S. problems appeared when i installed the Mavericks version.If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk. -
TS1702 I did all of the steps to get apps to work and they shut down right away still
I tried a reset, uninstalling and reinstalling app, installing a new app and my app still kick back to the start page right away. So frustrating, any ideas?
You must have gone to the old microsoft post.
Here is the link:
http://support.microsoft.com/kb/2438651 -
Why is Siri opening and then stop listening right away?
When I use the "raise phone to ear" feature of Siri I hear the beeping to indicate that Siri is ready to listen and then right away I hear the beep that Siri has stopped listening. This happens when I raise the phone to my ear to talk to Siri. Also, the beeping to indicate "listening" mode plays through earpiece, the beeping to indicate "stop listening" mode plays through speaker...
Anyone else having this issue?I'm not having that issue but I'm pretty sure it's not going to matter after today since I believe Siri will no longer work once the 4 S is out tomorrow.
-
when i open up computer the login screen comes up and then goes dark right away. can't do anything with it. close lid and open up and it comes up again and then goes dark. i have to shut off and restart to get through the login page. then seems to work untill i close lid again. just started this today. software is up to date. using a month old mbp 15. any suggestions? thanks.
You could try wiping the hard drive and reinstalling the OS and all your programs.
Did you install any programs yesterday?
If not it may be best to take it to an Apple care center and have it checked out. Take it in while it is asleep so you ccan show then what is happening. -
After downloading and installing OS X Update 10.10.3 I am not able to open my Phot App. It opens and immediately shuts down. I've sent messages to Apple for help and no answers. Help!
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
my ipod app no longer works. Everytime I go to open the ipod app it stays open for a second and then shuts down. I am not able to get anything to play either through the standard ipod controls or the multitasking control panel. I'm sure there will be an update soon to correct this, i just wanted to see if anyone else was having the same problem.
wen i open ipod in my iphone ,, it gets stuck ,, and get backs to the menu ,,, and doesnot play anything ,, not video nor songIf your phone is not officially unlocked by the carrier in the UK, you can not use the phone using another SIM, unless you modify the software or the SIM, which can lead to unexpected results, such as non functioning apps.
Unauthorized modification of iPhone OS has been a major source of instability, disruption of services, and other issues
Problems resulting from those modifications can't be discussed in these forums, due to the Terms of Use -
my downloaded apps are not opening, they flash and then shut down. This hapened after i upgraded to the 5.0. How do i fix it!? I've tried everything
You need to resync you applications or redownload them for free via app store. They may be read by your phone, but they are really not there. Re downloading will fix this.
-
Application opens for 1 second and then shuts down
Obama2012 app opens for 1 second and then shuts down.
I have deleted it 3 times and reinstalled 3 times but the app continues to open briefly and then close
-
I need to revert my timeline back to where it was before it was saved. I made a compound clip and then trimmed it and exported it and then shut down fcp. So, when I opened it back up there was only the compound clip. Can someone help me and tell me how to revert back it back to the last time before it was saved? HELP??
Select the compound clip and do Clip->Break Apart Clip Items (or Cmd-Shift-G).
-
I'm on my iPod touch 4th generation and I wanna delete apps. Well I hold it down nd the X appears but as soon as I press the X it doesn't do anything for a little bit and then shuts down and turns on again by itself, HELP ME DELETE!
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
iPad 2 gets activation errors in FaceTime and messages,plus Facebook app opens and then closes
Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use the wall-mount charger that came with the iPad and charge overnight. Do NOT use an iPod/iPhone charger. Do NOT use a computer's USB port. Then, operate it normally until auto shut-down (ignore any low level alerts that may appear). An irony is that doing that test to determine the total operating time is also the procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem. I am stating, however, that we don't yet know. If the above test does, in fact, indicate a problem, read this.
Also, according to Apple:
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge. -
Acrobat Standard 10 starts up and then shuts down within a few seconds
Im running windows 7 professional. I was using adobe acrobat Standard 10 and downloaded and installed the files to be able to view 3D pdf's. after that it would open acrobat standard and then shut down after a few seconds. So then i tried to use acrobat pro 11 and then it worked fine. The problem was that this acrobat was only a trial version. I then tried to do a system restore to just have the acrobat standard 10. I then was having the same issues as before. So i unistalled everything including the 3D viewing program. Reinstalled just acrobat standard 10 and i still have the same issue. I manually downloaded the latest update and that has not worked. I am not to sure what to do???
With the uninstall (and hopefully deactivation), you should have also run http://labs.adobe.com/downloads/acrobatcleaner.html and removed the Acrobat folder. the reboot and reinstall.
Maybe you are looking for
-
Hi All, Our client is implementing SRM and the conversion is from non-sap legacy system. Is there a way to upload all the Open PO's without manually keying it in. Thanks, Reena
-
HT1923 Win 7(64) Home Premium, sp1: Receiving Error 2203; can't uninstall or update iTunes.
iTunes 10.5.0.142 on Win 7(64): When I try to uninstall, change, or repair it from Control Panel or even update it, I get Error 2203 every time. I am following Apple support instructions, "Removing and reinstalling iTunes, Quick Time, and other softw
-
hi, How to trigger error messages in FPM ? I have added one custom field in Standard Travel Component and have to validate the same. Error messages with Focus on Attribute has to be done.
-
Database table of Match approval level data in shipment more tab
hi friends i need to know the database database table of Match approval level data in shipment > more tab of PO. pls help. its urgent.
-
ACL blocking traffic towards the management interface on WLC 5508
Hello All, I need to apply an ACL in WLC 5508 such that it would allow https traffic on management interface only from selected clients. For same, I have created an ACL permitting only the intended users while blocking the rest. Have applied the sam