Apps open on it's own

I recently had my screen repaired and I have also downloaded the 7.1.1 software update. Now, my apps open spontaneously; dials numbers; and doesn't allow me to type text easily.

Take the device back to whomever "repaired" the screen to have it properly corrected.
OR
Take the device to a competent repair facility to have it repaired, if possible.
OR
Replace the device.  Apple will not touch it after others have opened the device.

Similar Messages

  • I have model A1458...been acting possessed.... apps opening and closing on their own...zooming in and out... not always responsive to my touch... what could be the problem?

    i have model A1458...been acting possessed.... apps opening and closing on their own...zooming in and out... not always responsive to my touch... what could be the problem?

    The two most likely culprits would be a faulty cable/charging block or a bad digitizer. Try charging the device with a different charger and cable. If the problem goes away, then the problem is with your charger. If it does not, try the basics of resetting, restoriing from back up, restoring as new. If you still have the problem, make an appointment at the Genius Bar at your local Apple Store for evaluation.

  • My ipad 4 dropped and now apps open and close on their own

    My ipad 4 dropped off my lap.  The glass is intact but now all the apps open and close randomly on their own.  I tried to reboot it and it didnt workd.  Any help would be greatly appreciated.  Thanks

    THANKS for your prompt reply  Bluetooth is off in my laptop and IPhone.. and in fact the reset is the only thing that can make it back to normal. But for a lil while. I wonder if it is the touch, or the home botton... both things are very expensive to replace, so I wouldn't like to spend $$ and continue having the prob.....

  • My ipad2 has gone haywire with apps opening and closing pictures flashing on safari history messages, key board etc. I have tried rebooting it to no avail.

    My Ipad 2 is possessed. I was reading a book when the pages started flipping on hteir own, with apps opening and closing. I did a cold boot, but it was no help. No, it has not gotten wet.

    Sounds like a hardware problem. Contact Apple Support.

  • My Mail app opens unprompted everytime i reboot or awake my macbook pro from sleep.  This was not an issue until i shut down my laptop for the first time in a while 2 days ago.  ANy ideas how to stop this?

    I recently shut down my MacBook Pro for the first time in a long time.  SInce then, everytime i reboot or awake my laptop from sleep, the Mail app opens unprompted causing my computer to slow down incredibly, and some apps to freeze.  I have no idea how to stop this or why it even started doing this.  Any ideas on how to get it to stop? Thanks!

    I have this problem too with my Macbook Air. Mail opens automatically every time my laptop sleeps. I actually just asked about this in my own thread. However, it is not causing my apps to freeze.

  • Why is 11.1.3 opening all on its own?

    The app is opening randomly on its own and even after I close the app and force close it in some instances, it continuously opens and I can't accomplish a thing as it starts playing music...and randomly starts and stops the song. It is very weird and annoying. Any help would be GREATLY appreciated. Thanks a ton!

    my iTunes has stopped the annoying issue... but I have no idea how I stopped it.  I think, after I downloaded iTunes from the App store again - it took another 2 days and rectified itself.  Sorry I can't be of help and hope you all manage to have this issue resolved.

  • ITunes 11.0.1 keeps opening up on its own.

    Hi all. I have Win 7 64 bit. I have disabled wifi synch I beleive as well as home sharing. Would appreciate any help from anyone as its driving me nuts.
    iTunes will invariably open up on its own no matter what I am doing. if I close it, then in 15 mins or so will do it again.
    I've learned to just keep it open as a stop-gap measure but hope someone can offer some advice.
    Thanks

    Woohoo !
    It's nothing to worry about and it's certainly not a virus (there aren't any that affect Macs) - it's the icon from an application in your Utilities folder called X11. You can safely click on it, drag it off the dock and it will disappear in a puff of smoke. If it has a a little blue blob under it it means that the app is open so click and hold the icon on the dock and select quit and then drag it off the dock.
    It's also worth looking in System Preferences>Users & Groups (if you're on Lion) Accounts (if you're Leopard/Snow Leopard) and click on the Login items tab and check X11 isn't listed. If it is, click on the minus sign to remove it from startup items.
    Not sure what X11 is for, I've never used it, but I think it might be something to do with programming (probably wrong though )
    Edited to add: Looking at your pic again it has got a blob under it so I reckon it's launching at startup, so do as I suggest with login items or click and hold the icon on the dock and deselect 'Open at Login' under 'Options'.

  • The window 8 store and all other app open and then close immediately .

    The window 8 store and all other app open and then close immediately .I
    have tried many methods like sfc /scannow,, powershell
    -ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\WinStore\AppxManifest.xml without the quotes but , changed registery entries but found no effect . kindly help me !

    Hi ObaidMaki,
    This forum is to discuss problems of Windows Forms. Your question is not related to the topic of this forum.
    I would suggest you posting it in the dedicated Windows Forum
    http://answers.microsoft.com/en-us/windows for more efficient responses, where you can contact Windows experts.
    Best regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • App.open options when opening a newer version photoshop file by an older version of photoshop, App.open options when opening a newer version photoshop file by an older version of photoshop

    So, where I work, we have a script that handles all of our heavy lifting.  This script is running on CS6, and all of the users are running CC 2014.  Now when the CS6 machine opens a document with any type of vector object from CC 2014 it throws a dialog box asking if I want to flatten, cancel, or Keep layers.  I do have DISPLAYDIALOGS.NO set at the top of this script. 
    I under stand scripting quite well, but I'm just not sure if there are app.open options to tell this to keep layers.  Also, I'm pretty sure a try catch block will not work, becuase this dialog appears before the image is actually pixels on the screen. 
    When the script generates our web images I've tried to flatten the document right after its opened and I still see this dialog.  Any help would be super appreciated.
    Thank you!

    app.open will encounter problems that you really have no control over so you get an annoying dialog that you can't do anything with. The one that caused me the most grief is when a script tries to open a corrupt jpg image. IMNSHO, app.open should throw an Exception if it can't open the file and DisplayDialogs.NO is set. That way you can log the filename and deal with it later.
    Bottom line is that there is nothing you can do in JS. One thing I have done in the past was use a utility like AutoKey on Windows that looks for these dialogs and automatically responds to them so you can continue processing. I'm fairly certain there is something similar available for OS X.

  • Is there a way to switch off by default the video on FaceTime? I only ever use this app for audio/calls and hate the video being on. I especially hate that if I leave the app open to receive calls it means the camera and green light are on.

    My issue is that I can't find a way to have the camera switched off when the app is open and so this means if I want the app open all day to receive calls then the camera is going to be on the whole time. Even if it didn't potentially drain the battery, or add to the CPU usage or whatever else may cause any problems whatsoever (wheel of death!), I just don't want the camera on as I don't see myself ever wanting to use the video call feature but I would use the audio/call multiple times throughout the day to make and receive calls. The camera being on when the app is open is enough to prevent me from using the app. Also ever since seeing that episode of criminal minds where if you saw the green light on above the screen then it meant the killer was watching you!
    Basically I just can't believe there isn't a way to disable the camera whilst having the app running. I know when initiating an audio call the camera goes away, but I would like the camera away the whole time. To me it just would make sense that if you click the video option then the camera is on, and if you click the audio option then the camera goes off. It just seems waaaaay to basic a thought for apple to have missed... Let's face it, we're not all as pretty as the people in the apple adverts and don't want to see our ugly mugs staring back as us when we work all day at our macs!

    I have exactly the same concern. It seems it would be a simple fix for Apple to allow users to turn off the camera (and even the mic) while keeping FaceTime open -- especially now that it turns out FaceTime must remain open in order to send and receive iPhone calls on a Mac.
    I like to think this new functionality of FaceTime will be baked into a future release of Yosemite, as the current setup has that not-quite-finished feel of a work in progress. In the meantime, there's nothing like a little piece of Post-It stuck over the camera to keep the NSA from watching your face as you type a post to the Apple Support Communities.

  • I'm running Pages version 5.2 on a Desktop Mac version 10.9.2. with the Pages app open how do I use the Time Machine to go back five hours to see the work?

    I'm running Pages version 5.2 on a Desktop Mac version 10.9.2. With the Pages app open how do I use the Time Machine to go back five hours to see my page? Can I access Time Machine within an app like Pages? How do I enter Time Machine within the application? It always takes me to the Finder. I apolgise for the mumbo jumbo. I simply do not know how to use Time Machine. It makes sense when I follow the Tutorial but then I lose it.

    OK. You've kind of skipped over the reason why you want to go back five hours, but my assumption would be that you've made changes to a Pages file that you want to revert.
    There are two ways to tackle this. From Pages itself, open the current version of your document, and from the File menu, click Revert To, and Browse All Versions. You'll then be in the Time Machine interface for that file, and can browse back to the version you want.
    Or, outside of Pages, you can select the file (or the folder it was originally in, if you've since deleted it) and enter Time Machine from the TM menu (it sounds like you've already tried this?)
    best
    Matt

  • Apps open and close

    hello
    i have a iphone 4. My apps open and close immediatly. I can't use them.
    What can I do ?
    thanks for your help
    Chris

    Hey Chris,
    It just happened to me. If all the brought apps are closing immediately (and excluding the built in ones) then try either:
    1. Restart your phone.
    2. Hold the home button for the task bar and hold the app for a few seconds until they jiggle and a red cicle with a line in it shows up. Touch each one (this is just deleting them and "refreshing them", you aren't really deleting the app).
    3. Go to the App store and buy a free app, any, and install it. Try opening one of your apps now. This worked for me. If it works, you can go ahead and delete the free app.
    4. If all fails...restore your phone.
    Good luck!

  • Annoying: Mail app opens randomly after screen saver login

    Hi
    I have my security settings setup so that everytime my iMac goes into screen saver mode it asks for login password. Recently I have noticed that if I leave the computer unattended for a long period of time (a few hours) and come back, the mail app opens up. If I just go away for a few minutes and come back the problem does not occur.
    Since I am not using the mail app and have not set it up, the setup account window is the one to come up.
    I have checked the Login Items under Accounts in System Preferences and it's not there. I have also right clicked the icon in the dock and checked if it was set to start up automatically - it isn't.
    I have read online this maybe has something to do with email alerts from iCal but I have not set up iCal to send email, nor do I know where I can disable that type of feature. This is happening even when iCal is closed and I have no events for that day. I've looked around in the prefrences of iCal and disabled any option that has something to do with email but it still happens.
    The next logical step was to check Activity Monitor to try and see what started a process. You see I am originally a Windows user and have recently converted my OS religion. Back in Windows when something like this happened I had many tools that could tell me what started the application and even it's command line. But with the Mac all i have is the activity monitor and I'm still not familiar. I have clicked the process and then inspect, the parent process indicated launchd, pressing that lead me to another inspector window still without much info.
    How can I solve this, it is becoming rather annoying?
    Also does anyone know a better process monitor for mac? or how to use top on the terminal to get the information I need?
    Please help a confused new mac user!
    Thanks

    So I've tried both of the tips you gave my guys, but non of them works
    But I've found out something. When I switch to different space (in spaces), than drop some file and then try to switch back to my mail space, there are 2 possibilities how to do it. First - I just move mouse to the space to where I want to switch, wait for a second and it switch automatically or I can move mouse to the space where I want to switch and than press spacebar to make it faster.
    The strange thing with opening app from dock happens just when I press the spacebar.
    And question for your other answer - yes, it happens just with apps in my dock.
    It is so uncomfortable...
    EDIT: few days ago I've run OnyX (which was probably mistake) and this happens probably since than. I used it because Snow Leopard got little bit slower so I wanted to clean it... It might be because of that.
    Message was edited by: jakudo

  • Help I can only have max. 3 osx apps. open at the same time ?

    Help I can only have max. 3 apps. open at the same time ?
    If I have 3 apps. open, and try to open a 4th. this message comes up :
    The application "Mail" cannot be launched. -10810
    Of cause if I'm trying to open up something else than mail, lets say iPhoto, it will say "iPhoto".
    This is very weird to me, and I'm normally pretty good at solving issues myself, but I'm stuck with this one.
    Please help out

    I've had this quite a lot too. Do you find that under these conditions you can't load a disk image either?
    At first I put this down to Rosetta taking up a lot of resources. I was running OmniWeb with a lot of pages open in the workspaces so I've switched back to Safari until OmniWeb is UB. This morning I read that having Windows file sharing switched on helps to cause this problem. I switched this off, rebooted and ran disk utility to repair disk permissions and I've been running OK since then. I've currently got 13 apps open plus Finder and Widgets. They include 2 bigguns, Eclipse/MyEclipse and Visual Paradigm for UML. It'll probably stop working now I've written that.
    I run a MBP 17 with 2GB memory. My guess is that Windows file sharing does cause problems. I just hope Apple has resolved this in 10.4.7... whenever that is.
    Gareth

  • Creative Cloud App open and close / crash immediately.

    Creative Cloud App open and close immediately on mac book pro.
    There is no error message.
    I just see cloud icon on top bar for few second and the it disappear and nothing happened.
    What  I done:
    reset and reinstal the CC App few times
    uninstall CC App and run a Adobe Cleaner Tool and clean CC App. The install again
    I have CS6 still installed on Mac and can't uninstall right now.
    MacBook Pro
    15-inch, Mid 2012
    Processor  2.3 GHz Intel Core i7
    Memory  8 GB 1600 MHz DDR3
    Graphics  NVIDIA GeForce GT 650M 512 MB
    Software  OS X 10.8.3 (12D78)
    Any solution ?

    Hi Harvester,
    I've been having this issue for a while, and I FINALLY got it to work.  For what it's worth, here's what I did.
    I was trying to send files from my laptop to my desktop and for some reason i saw that my desktop couldn't find my laptop.  I went to the Sharing settings and saw that under my "Computer Name" there was nothing there.  This may have happened due to my upgrade to Mavericks.  Once I placed filled that info in, and restarted my laptop.  Lo and behold, Creative Cloud and Growl started working side by side again
    This may not be your issue, but I thought I'd pass it along.

Maybe you are looking for

  • Extension Manager fails to load  (Error reported on DigitalPublishingRelease.mxi_air)

    Hi Adobe CreativeSuite Standard 5.5 has been installed but Extension manager is failing to load or fails whilst loading. Would someone be able to assist? Below is the end of the log.txt file after the ExManLog.YES file was created. The log file isn't

  • How to redirect to a page dynamically after authentication Apex

    We have developed an application and the application id is 333. we have developed a login screen(page No. 111). After login Company page (Page No.1) will appear where the user selects the company name. Once company is selected, the control goes to Me

  • How to update eket data by function module or BAPI?

    Dear All : I have to update all PO's vendor batch data . I want  to find a function module to execute the change , but I can't find a proper one to do the modification. I have try to use ME_CONFIRMATION_EKET_UPD , but it seems  PO need have ekbe data

  • Servlet not responding

    We have WLS 5.1 with Service Pack 6 on Solaris 7 machine,JDK 1.2.2_05,Apache           Bridge with Service Pack 5 and Apache 1.3.12 on red hat 1.2. (Tried Apache           Bridge with Service Pack 6, it was very slow).           As the WLS is running

  • Is *.html a "better" file structure for SEO detection than *.htm?

    I like Muse...a lot.  For my skill-set of having to be both the "web designer" and "web developer", Muse works TONS better than DreamWeaver ever did for me.  (Maybe when Muse adds in the feature of being able to design a site that is completely respo