Apps to Windows share under unsecure system/workstation objects

ZENworks Desktop Management 6.5 SP2 on NetWare 6.5 SP5, 6.5 SP1 agents
Windows 2000 SP4 w/ rollup 1 and XP SP2 workstations on 2003 R2 domains
I'm looking to launch application installs and custom policies under
unsecure system context associated to workstation containers/objects
with the corresponding executables/scripts off a Windows shares (2003 R2
domain accounts).
What/how would you recommend I manage file system rights on Windows so
that only the computer/system account has rights to these corresponding
paths?
Should I call a domain account that has admin rights to the workstations?
Any input is appreciated.
Thanks,
Tony Pedretti

Or simply add the Domain Workstation object as a trustee of that file
location.
You could even use a Windows Groups to place all of the Workstation Objects
in.
I presume you could even use IDM to synch an E-Dir Workstation Group to an
E-Dir group.
Especially if you NDS Workstatin Object name was the same name as the Domain
Workstation Object.
"Tony Pedretti" <[email protected]> wrote in message
news:UJbwh.12515$[email protected]..
> ZENworks Desktop Management 6.5 SP2 on NetWare 6.5 SP5, 6.5 SP1 agents
> Windows 2000 SP4 w/ rollup 1 and XP SP2 workstations on 2003 R2 domains
>
> I'm looking to launch application installs and custom policies under
> unsecure system context associated to workstation containers/objects with
> the corresponding executables/scripts off a Windows shares (2003 R2 domain
> accounts).
>
> What/how would you recommend I manage file system rights on Windows so
> that only the computer/system account has rights to these corresponding
> paths?
>
> Should I call a domain account that has admin rights to the workstations?
>
> Any input is appreciated.
>
> Thanks,
>
> --
> Tony Pedretti

Similar Messages

Slow start of app from Windows-Share

Hi,
i have an ZFD-App which has to start an *.EXE from a Windows-Server. The command ist like \\winserver\icd\path\boxes.exe When I start this ZEN-App I have to wait longer than 30 seconds before I can see a logon-windows of this program. If I make a good old local link on my WinXP-desktop and I start this I see the logon-windows after only 2 seconds. This is e very big difference.
I tested this scenario with another EXE from another windows-share, it's the same problem.
Any suggestions?
Uwe Bassen
Hamburg
Germany

Well, if the user/workstation isn't authenticated to your windows box before
the app starts, its going to have different timeout issues (I'm not sure how
you have the app assocated).
My suggestion: copy the exe to a location that the user/workstation already
has rights to. Not sure why you have to run the app from a server the user
doesn't have rights to already.
You might be able to build in the authentication prompt into your app with a
pre-launch script (i.e. net use )
>>> On 12/21/2009 at 3:46 AM, in message
<[email protected]>,
bassen<[email protected]> wrote:
> Hi,
> i have an ZFD-App which has to start an *.EXE from a Windows-Server.The
> command ist like \\winserver\icd\path\boxes.exe When I start thisZEN-App I
> have to wait longer than 30 seconds before I can see alogon-windows of
> this program. If I make a good old local link on myWinXP-desktop and I
> start this I see the logon-windows after only 2seconds. This is e very big
> difference.
>
> I tested this scenario with another EXE from another windows-share,it's
> the same problem.
>
> Any suggestions?
>
> Uwe Bassen
> Hamburg
> Germany--
bassen----------------------------------------------------------------------
--bassen's Profile:
> http://forums.novell.com/member.php?userid=30002View this thread:
> http://forums.novell.com/showthread.php?t=396411

Debugging iOS AIR app from FlashBuilder running under Windows/Paralells on a Mac

On my Windows 7 workstation at work, I use FlashBuilder 4.6 to debug iPad apps all the time. The process is simple and reliable -- start the debugger which begins waiting for the app to notify it, move the app into iTunes, move it onto the iPad, launch the app, the app notifies the debugger that it is running, debugging works!
At home I am running Windows 7 under the latest version of Parallels on my iMac running the latest version of Lion. I go through the same process: I connect my iPad (the same one from work) to the Windows VM, and Windows iTunes recognizes it and syncs files just fine. I can move a non-debugger version of the app onto the iPad and it runs just fine. However, when I start the debugger in FlashBuilder and then move the app onto the iPad and launch it, the app is not able to find the Flash Debugger. When it launches I just get a black screen for about 2 minutes, then I get a message asking me to enter the IP address of the Flash Debugger.
There is an old help document indicating that this is due to the iPad and then debugger host computer not running on the same wifi, but I don't think it's relevant. My workstation at work isn't even connected to wifi.
I will consider any advice. It's pretty important for me to get this up and running at home. I tried running directly under bootcamp, but both Microsoft and Adobe consider the bootcamp install to be a unique install of their products.
Thanks!

It turns out that the "help document indicating that this is due to the iPad and the debugger host computer not running on the same wifi" was spot on. At my work environment, the wifi and the ethernet lan are on the same network. I was mistakenly assuming that the iPad and the debugger were communicating via the USB cable, but this is not the case. I think what happens is that FB embeds the ip address of its computer in the debuggable app. The app then connects to FB at that IP address.
My problem was that I had the Network Settings of my VM set to "Shared" under the Parallels hardware config set up. My VM then had a 10.211.55.x ip address instead of a 196.196.0.x ip address, which is the range of addresses on my LAN. Changing the setting to "Shared" fixed the problem.

New app windows opening Under current ones

so I have this strange issue that just suddenly started happening and it's driving me nuts. this only seems to happen when I open applications, never folders, and it does it to ALL applications, so I know it's a system problem. the issue is this: say I've opened FireFox and now decide to open System Preferences. when I click on the System Preferences icon, it appears that nothing has happened, when in fact System Preferences HAS opened, only the Sys Pref window opens UNDER the FireFox window. unless I'm going nuts I seem to remember that all apps opened their new windows on TOP of all other windows. the same thing happens if I open Mail, Word, Safari, you name it. I cannot find any logical preference that I might have changed to cause this, and am really sick of having to find new windows after I open an application. any help would be greatly appreciated.

Hard to say, except something mucked up in memory, where everything running on the machine is stored and operating. You might want to review what you had done since the restart prior to it happening. If it doesn't come back, running the Apple Hardware Test program, extended tests, wouldn't hurt. If you want to thoroughly check out the installed RAM, download and run Rember.

Run on a Windows 64-bit operating system either as a native application or under WOW64

I am using Visual Studio 2013 Professional, and need to compile my application in a way that it works with existing libraries on my system that are only 32 bit.
I read this someplace .... "When you compile an application, you can specify that it should run on a Windows 64-bit operating system either as a native application or under WOW64 (Windows 32-bit on Windows 64-bit). WOW64 is a compatibility
environment that enables a 32-bit application to run on a 64-bit system. WOW64 is included in all 64-bit versions of the Windows operating system."
Can anyone tell me HOW I "specify that it should run on a Windows 64-bit operating system either as a native application or under WOW64 (Windows 32-bit on Windows 64-bit)." ?

Hi Davepc,
Based on your issue, I think the pvdg42 and Wyck's suggestion are really help you. So if possible, I suggest you can try their suggestions to check your issue.
In addition, I get some useful message from the MSDN document, I assume that it maybe useful for you.
(1)So if your application is VB, I suggest you can refer the following document to check your issue.
https://msdn.microsoft.com/en-us/library/8ck8e1y2(v=vs.110).aspx
(2) If your application is c#, please refer to:
https://msdn.microsoft.com/en-us/library/zekwfyz4(v=vs.110).aspx
(3)If your application is c++, please see:
https://msdn.microsoft.com/en-us/library/h2k70f3s(v=vs.80)
Hope it help you!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

X64 Oracle 11g R2 Install On i7 3770 Windows 7 x64 Enterprise System Fails

x64 Oracle 11gR2 installation on my new Windows 7 x64 Enterprise system fails after the "Desktop/Server Class" screen. I click Next, and then nothing happens. The install app closes and no installation logs are available. I checked the Windows logs and there is nothing obvious.
My new system has an Intel i7 3770 cpu with 32GB of ram. My old system had twin Intel Xeon EM64T cpus with 3GB of ram. Both systems ran Windows 7 x64 Enterprise. x64 Oracle 11gR2 installed and ran fine on the old system, but the old system started making "funny" noises and had to be replaced.
This is my personal system, not a commercial installation. I got Win 7 x64 Enterprise from my community college, which is a Microsoft Partner. I need Oracle for my relational database classes.
The story so far:
1. I downloaded win64_11gR2_database_1of2 and win64_11gR2_database_2of2 and unpacked both of them into a folder named win64_11gR2_database_install, replacing as necessary.
2. I set up a loopback adapter and added the following entry to c:\Windows\System32\drivers\etc\hosts:
10.10.10.10 localhost PaulK-PC # Loopback Adapter for Oracle 11gR2 Install
3. After creating the loopback adapter, I restarted my PC. I can ping the adapter with no problems.
4. I ran c:\Users\PaulK\Downloads\Oracle\win64_11gR2_database_install\database\setup.exe as Administrator.
5. I skipped email notification, since I don't have a support agreement.
6. I select "Create and configure a database".
7. Whether I select Desktop Class or Server Class, when I click Next, the installation app dies.
Page 2-2 of Oracle Database Installation Guide 11g Release 2 (11.2) for Windows E24186-01 states that an x64 installation of Oracle requires an AMD64 or EM64T cpu. Does this mean I need to install the x86 version of Oracle 11gR2, or is there some other problem?
Suggestions?
Thanks.

And Part II:
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.DatabaseChecks updateAccountStatus
CONFIG: SYSMAN password modified
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.DatabaseChecks updateAccountStatus
CONFIG: Unlocked SYSMAN account
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: orcl
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil isHASInstalled
CONFIG: isHAInstalled: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 agentHome: null isCentral: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 isDBC: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 isDBC: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to E:\app\PaulK\product\11.2.0\dbhome_1\oui
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [E:\app\PaulK\product\11.2.0\dbhome_1]
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME E:\app\PaulK\product\11.2.0\dbhome_1
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file E:\app\PaulK\product\11.2.0\dbhome_1\install\staticports.ini
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: E:\app\PaulK\product\11.2.0\dbhome_1:localhost:null:orcl:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_localhost value: 3938
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_localhost value: 1158
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_localhost value: 5540
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_localhost value: 5520
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for Node: localhost : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig copyAgentTimeStampFile
CONFIG: File: E:\app\PaulK\product\11.2.0\dbhome_1\localhost_orcl\sysman\emd\agntstmp.txt:localhost does not exists.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully unlocked relevant accounts
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Finished executing emreposoutofbox.sql
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Submitting dbms job: E:\app\PaulK\product\11.2.0\dbhome_1\sysman\admin\emdrep\sql\core\latest\admin\admin_submit_dbms_jobs.sql
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Successfully submitted dbms job
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: connectDesc : (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=orcl)))
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1903)
     at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3230)
     at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
     at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
     at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
     at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
     at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
     at java.lang.Thread.run(Thread.java:595)
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at E:\app\PaulK\cfgtoollogs\dbca\orcl\emConfig.log for more details.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
     at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
     at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
     at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
     at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
     at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
     at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
     at java.lang.Thread.run(Thread.java:595)
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to E:\app\PaulK\product\11.2.0\dbhome_1\oui

Windows 7 Backup "The System cannot find the path specified" - Error Code 0x80070003

I'm having severe problems backing up my own machine to a share on our
FILE-SERVER as \\FILE-SERVER\Backup\
I have already backed up another PC successfully using exactly the same settings I have used on my own PC. So I presume it is nothing to do with the
FILE-SERVER or the Backup settings. It has to be something to do with what I'm trying to backup from my machine.
First some background.
This exercise all began when the Windows Server 2008 r2
O/S fell over on one of our Servers. I tried reinstalling the O/S several times, without success. In the end I grabbed another drive and re-built the O/S. I then had problems promoting it to a Domain Controller on the network.
In the end I renamed the Server from FILESERVER
to FILE-SERVER.
We routinely share four folders on what is now
FILE-SERVER:
\\FILE-SERVER\Backup
- a Folder where backups from all other machines are written, so that they will be backed up with the Server
\\FILE-SERVER\Company
- holds all our Company data
\\FILE-SERVER\GEM
- this is the application folder for our own database
\\FILE-SERVER\Install
- holds all Install files for the software we use
These are all held on a RAID 1 Array that is separate from the System Disk that fell over.
Prior to the Server falling over, I had Backup working fine on my machine.
On my Notebook PC I had made these shared folders 'Available Offline', so that I still had everything available to me when I was out of the office. They were
of course shared as \\FILESERVER\... not \\FILE-SERVER\...
Having got the Server up and going again, I began to get the Backups from the Windows 7 Client PC's going again.
I started with a Desktop, which of course did not have any Offline Files.
That proved relatively straight-forward.
I then started with my machine. Initially I did not make the above shared folders 'Available Offline'. I set up my Backup using exactly the same settings that
had worked OK on the desktop machine. But when I ran the backup I got:
The System cannot find the path specified, Error Code 0x80070003
I tried all sorts of things to get it to work:
I restored the system to the earliest point possible,
I ran chkdsk,
I defragged the drive
All to no avail, so I tried backing up:
with and without a system image,
reducing the backup to a single folder,
a single Folder with only one .txt file in it,
making the Folders 'Available Offline' again.
Nothing made any difference.
In the end I looked in the Sync Center to look at the Offline Files Folder.
Under Mapped Network Drives I discovered I still had the Files and Folders from
\\FILESERVER. In their Shortcut Menu 'Always Available Offline' was greyed out. So I deleted the Offline Copies. This deleted the Files in the Folders but not the Folders.
Since I could find no way of deleting the old Mapped Network Drives, I decided I'd painted myself into a corner by renaming the Server.
So I bit the bullet and re-installed my Notebook too. This did get rid of the unwanted old Mapped Network Drives - BUT NOT THE ERROR!!
I’ve been through all the troubleshooting procedures in:
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Method 1
It had none of the symptoms reported in
http://support.microsoft.com/kb/973455
but I scanned for ‘reparse’ points anyway. Found several “Junction Points” but none that were “Mounted Volumes”, just ordinary ‘File Folders’.
Method 2
Check a drive for errors.
Looked at:
http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors
Checked
both boxes. I closed machine down, to check for errors when it re-started.
It didn’t seem to find anything.
I say seem, because I did not actually see it finishing checking the empty space, but stages 1-4 found no problems and Windows 7 restarted normally.
It did detect 66 ‘Reparse’ Points, which is more than it found when I scanned for them earlier.
Method 3
Yes, I am an administrator or my own machine and, as such, I have ‘Full Access’.
I downloaded an ran the Process Monitor, filtering for Process Name “Wbengine.exe”, but did dot get a single event.
So I’m not sure what’s going on.
HELP - I'm out of ideas!
I have a WORD Document that documents all the Settings I've used on both the Server and the Clients, together with the reasoning behind those settings, but
I cannot find a way of uploading it.

I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks.

Installing 11i apps on windows xp and Red Hat linux AS 3.0

Hi,
I am a newbie to Oracle E-business suite............i will be very helpful if anybody could help me with the full procedure on how to install Oracle apps on windows on Windows XP and Red Hat linux AS 3.0.........starting with configuring ip.....i would really appreciate if somebody helps me out...........well thanks in advance..waiting for a optmistic reply...
Thanks again,
Virendra

I have done installation on XP and 2000 servers are heres the steps... detailed ones. I also request those who install Oracle Apps 11i to first read the installtion pdf's which helps you understand clearly the prerequisites overall.
You cannot find the Pre installtion steps(such as Mks Toolkit and GNUMake config) in more clear terms from those documents.Which are explained here.
The Must PDF's to refer before installation
1)r1152ins.pdf
2)11iconcepts.pdf
According to the 11iconcepts PDF you can decide your business needs the N-Tier Architecture and Database Server and Application Tier Server File System in a very clear terms.
The installation process can be divided into
Pre Installtion,Installation and Post-Installation stages.
I would caution everyone to concentrate more on Pre Installation stage and which is more critical for a successfull installtion of Oracle Apps and to be free with later cropping up problems.
Further before moving into Installtion stages i have to Explain the Number of CD's and Installtion type's in Oracle App's.
In many places you may need to wait patiently even more than 10 minutes for screens(Dialog Boxes) to appear dont conclude prematurely some problem on system.
In oracle Apps 11.5.1 it consist of 12 CD's.
1) Start Here CD(RAPID Installation Wizard)
2)1-11 CD's
1-3 Application Top information
4th Oracle DB
5-6 IAS and other tools
7-11 Oracle Apps DB.
You have to decide whether you are going to do a Single Node Installation(No Post-Installation Task) or Multi Node Installation. Refer(r1152ins.pdf)
While installing for Multi Node you can see the Installation locations to be mentioned as
Appl_Top,Common_Top,Data_Top etc.Try to install Appl_top and common_Top in one drive and Data_Top in another Drive(Single Node) and in different nodes in Multi Node installation.
Installation Types
Production ==>Real time Env implementation's
Test ==>For test Env Purposes
Vision Demo==>R&D or learning Purposes.
Pre-Installation steps
======================
Space Requirement for types of installtions
Install VC++
How to Download and install MKS tool Kit
How to Download and Configure GNUMAKE
Env path setting
Create Applmgr user in Win2000
Space Requirement for types installtion:
Memory Requirement
1 GB of RAM(512 Fine for initial Installtion)
but planned for more user connections another 1 GB of Ram and according to the number of user's and Application needs you have to Increase the Memory.
HDD capacity
APP_Top(A)
COMMON_TOP(C)
DATA_TOP(D)
Test DB : 22 + 20 GB (60 GB recommended)
Prod DB : 22 + 20 GB (60 GB recommended)
Vision Demo DB: 22 + 35 GB (80 GB recommended).
Plus space for ur staging area.
This are the actuall space required for the Oracle Apps Alone plan for more space for future needs etc.
Softwares on System
Win2000 server with Patch1,Winzip and Acrobat Reader Latest version etc.
Install VC++:
Install a clean installtion of VC++ of Visual Studio Family 6.0
It should be first installed before installing MKS or GNUMAKE
NOTE: When Visual C++ is installed, let the installer register all environment variables. This will allow executables to be linked from the command line.
How to Download and install MKS tool Kit:
Note:Try to purchase the MKS tool kit from the below site.
or try to download the trial version valid for a months time.
http://www.mkssoftware.com/products/tk/ds_tkio.asp
Evaluation copy from
http://www.mkssoftware.com/eval/
Choose "MKS Toolkit for Interoperability " Download it in C:\
Again you have to click the downloaded kit to start the actual download of 38 MB of MKS tollkit Evaluation version.
You will be sent a Demo serial number to your mail id==>copy the same to a Notepad on your desktop.
Now start the installtion of the MKSToolkit on your system by clicking on the MKStoolkit downloaded.
It will prompt you for the Demo serial number which has to be provided.
The MKStoolkit will be successfully installed.
How to Download and Configure GNUMAKE:
1) HOW TO GET AND INSTALL GNUMAKE ON WINDOWS2000
This can be done by performing the following steps:
NOTE: Please, be aware that you must install Visual C++ BEFORE installing GNUMAKE, because its installation process involves linking executables.
1) Before downloading GNUMAKE, you will need to acquire some utilities which will be used for unpacking files. You can obtain the required utilities at the following
URL: ftp://ftp.gnu.org/gnu/windows/emacs/utilities/i386/
The directory contains the following files:
README
djtarnt.exe
gunzip-1.2.4-i386.exe
gzip-1.2.4-i386.exe
tar-1.11.2-i386.exe
tar-1.11.2a.exe
Only two of the files are required:
gunzip-1.2.4-i386.exe and tar-1.11.2a.exe
2) After downloading the above files, rename them as follows:
gunzip-1.2.4-i386.exe => gunzip.exe
tar-1.11.2a.exe => tar.exe
Place them into a directory that you can set in you PATH environment variable.
3) Point your browser to the following
URL: ftp://ftp.gnu.org/gnu/make
The files needed from this directory are:
make-3.77.tar.gz
make-3.78.1.tar.gz
make-3.79.1.tar.gz
make-3.79.tar.gz
Development requires to install version 3.77 or above. Downloading the latest version is perhaps best decision, but there are advantages to downloading the version required by development (3.77). (This document assumes that version 3.77 has been downloaded) (NOTE: AVOID USING SPACES IN
DIRECTORY AND FILE NAMES. GNUMAKE,VISUAL C++, ETC. DO NOT ALWAYS DEAL WELL WITH SPACES)
4) For instance, suppose you have downloaded file make-3.77.tar.gz on a directory called C:\GNUMAKE, unpack this file using gunzip.exe from a Command Prompt Window
Example: C:\GNUMAKE>gunzip make-3.77.tar.gz This last action, will expand file make-3.77.tar.gz and the extension .gz will be removed.
5) On the same Command Prompt Window, you should UnTAR the file, with the following
command: C:\GNUMAKE>tar -xvf make-3.77.tar This will create a new subdirectory called MAKE-3.77 under C:\GNUMAKE, the original directory.
6) In the new subdirectory, there is a batch file
called build_w32.bat; run the batch file to generate GNUMAKE.EXE
Try this from Command Prompt more than once if succesfully not built message appers till you get Generated successfully.
Note:If Possible run all the bat files in the MAKE-3.77 and also config.bat in the sub directory by double clicking it.
WARNING: There is a known issue with this last step, "GNU make fails to build regardless of chosing build_w32 or nmake"
See [NOTE:115937.1]
for work around. RELATED DOCUMENTS ----------------- For Microsoft Visual C++, MKS Toolkit and
GNUMAKE support, you should contact their respective vendors Microsoft Visual C++, MKS Toolkit
and GNUMAKE are registered trademarks.
http://support.microsoft.com/ http://msdn.microsoft.com/ http://www.mks.com/
http://www.gnu.org/ Note:104010.1: Release 11i on NT: Software Requirements
Note:115937.1: GNU Make won't make on windows NT
Important:All the downloaded files from GNU makes web sites shall be put in a single folder called gnumake under c:\ .Try to search for config.bat file inside this folders just click and
run it.
Env path setting:
Try to search make.exe generated in c:\program files\mkstoolkit\mksnt and copy and paste it
c:\gnumake\MAKE-3.77\windebug and c:\gnumake\MAKE-3.77\winRel also paste both this paths in the
My Computers==>Properties==>Advanced==>Environment variables==>Path setting's
After all this check as follows from CMD mode.
1)execute make at c:\>
2)execute gnumake at c:\>
In win2000 it may return error messages or Target wrong ignore it.If it is on Win NT then it will return proper status.
Create Applmgr user in Win2000:
Create a Applmgr user account in win2000 .
Installation:
=============
What here you require is the Patience .
Load the START HERE CD and run the C:\> cd \cdrom\rapidwiz
For Test and Prod it will ask for the location of Appl_Top,Common_Top and Data_Top location. Mention there path and ensure if more than one installtion say eg.Vision and Test or Prod to check the Path in all the tab pages its corresponding values and path's.
In Vision Demo many of the Options are not propmted from the user.
It will then do the system checking for Host Name and other details.All the checking should have been passed or if failed it will mark it in RED cross mark.Rectify the mistake and then onceagain proceed or else you will have problem after installation.
The Installation time takes around 5 to 6 Hrs of time.
For info on Post installation or on Multi Node follow the pdf's i have mentioned above.
The most tedious of all is succesfully crossing the Apps system checking it does for all
installed products it requires without any failure.
The GNUMAKE configuration or steps were nowhere given and it was all our trail and error exp.
This is possibly the most elaborate steps to install Apps on Win. post for further help. email me at [email protected] or [email protected]
Rajeev.

[solved] OpenGL apps in window do not obey window manager

Hello,
I have another X related problem, the first one resulted in downgrading my X
(see http://bbs.archlinux.org/viewtopic.php?id=44460 )
Now I am finally able to run both xv (video rendering) and dri (3d rendering), but
I have a problem, that when I run an opengl app in window (for example glxgears, but also game emulators and games in Wine), it does not move or resize when the window manager tells it to, e.g. when I move or resize the window. This makes 3D in window nearly unusable.
In my previous linux (suse) this worked normally; DRI was on and I was able to resize or move the 3D apps windows
card:
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev 01)
X version:
[danny@zdroj ~]$ X -version
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux zdroj 2.6.24-ARCH #1 SMP PREEMPT Wed Feb 27 01:15:32 CET 2008 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "IgnoreABI" "True"
Option "AIGLX" "False"
EndSection
Section "Extensions"
Option "XVideo" "enable"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/artwiz-fonts/"
EndSection
Section "Module"
Load "xtrap"
Load "dbe"
Load "GLcore"
Load "extmod"
Load "record"
Load "dri"
Load "glx"
Load "drm"
#Load "xv"
Load "freetype"
#Load "type1"
#Load "v4l"
#Load "drm"
#Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "us,cz_qwerty"
Option "XkbModel" "pc104"
Option "XkbOptions" "grp:alt_shift_toggle,grp:switch,grp_led:scroll"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
DisplaySize 380 300 # mm
Identifier "Monitor0"
VendorName "BNQ"
ModelName "BenQ FP91G+"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 83.0
VertRefresh 43.0 - 76.0
Option "DPMS"
UseModes "Modes[0]"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "HWcursor" # [<bool>]
#Option "PciRetry" # [<bool>]
#Option "SyncOnGreen" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "Overlay" # [<str>]
#Option "MGASDRAM" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "ColorKey" # 
#Option "SetMclk" # <freq>
#Option "OverclockMem" # [<bool>]
#Option "VideoKey" # 
#Option "TexturedVideo" # [<bool>]
#Option "Int10" # [<bool>]
#Option "AGPMode" # 
#Option "AGPSize" # 
#Option "DRI" # [<bool>]
#Option "OldDmaInit" # [<bool>]
#Option "ForcePciDma" # [<bool>]
#Option "AccelMethod" # [<str>]
Identifier "Card0"
Driver "mga"
VendorName "Matrox Graphics, Inc."
BoardName "MGA G550 AGP"
BusID "PCI:1:0:0"
Option "HwCursor" "off" #protoze jinak tam neni
Option "DRI" "on"
Option "AGPMode" "4"
#Option "OldDmaInit" "true"
#Option "ShadowFB" "on" # 1
#Option "TexturedVideo" "on" # 2
#Option "VideoOverlay" "on"
#Option "AccelMethod" "EXA"
#Option "Overlay" "24,8"
#Option "NoAccel"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync
-vsync
ModeLine "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
glxinfo:
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig
OpenGL vendor string: VA Linux Systems Inc.
OpenGL renderer string: Mesa DRI G400 20061030 AGP 4x x86/MMX/SSE2
OpenGL version string: 1.2 Mesa 6.5.2
OpenGL extensions:
GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_texture_compression,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_program, GL_ARB_window_pos,
GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_logic_op, GL_EXT_clip_volume_hint,
GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_multi_draw_arrays,
GL_EXT_packed_pixels, GL_EXT_polygon_offset, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_stencil_wrap, GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_texture_env_combine3, GL_IBM_rasterpos_clip, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_light_max_exponent, GL_NV_texture_rectangle,
GL_NV_texgen_reflection, GL_NV_vertex_program, GL_NV_vertex_program1_1,
GL_OES_read_format, GL_SGIS_generate_mipmap, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x23 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x24 16 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x25 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow
0x26 16 tc 0 16 0 r . . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow
0x27 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x28 16 tc 0 16 0 r . . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x29 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
0x2a 16 tc 0 16 0 r . . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
0x2b 16 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x2c 16 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x2d 16 dc 0 16 0 r y . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow
0x2e 16 dc 0 16 0 r . . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow
0x2f 16 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x30 16 dc 0 16 0 r . . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x31 16 dc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
0x32 16 dc 0 16 0 r . . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
can anyone please help me?
Last edited by danielsoft (2008-03-04 16:22:32)

solved with unofficial drivers http://forum.tuxx-home.at/viewtopic.php?t=153

Unable to view files from windows share

Hi guys,
I am wondering if you can help me out. I have 10 mac ocnnected to a windows domain. Five machinies are OSX 10.5.8 and five are OSX 10.6.8. The problem I am having is I can connect to the windows share via smb but I am unable to view the files. I can connect the server and see the folder listings but I am unable to view the contents of each directory. The users permissions are fine as they can log into a windows PC an are able to access the files as needed. I have tried different user accounts and all are getting the same issue. Each account has admin rights as well. I was wondering if anyone else has seen this issue before?
Thanks in advance!

files like movies or pdf files. Under the apps section, I can't see any way to transfer files.
Also do I need to completely sync my ipad, if i click sync then after a while it says can't sync all the apps present on the ipad

Easy Windows Share Connecting

Hello forums!
I have recently convinced our "hardware guy" at work to buy a new MacBook for work use. He had been interested in trying out OS X for a while and when the opportunity came up to get one, he jumped at it. I am sorry to say that he is less than thrilled with the level of control that he has over the operating system and is less than flexible in learning new ways of doing things. One of the ways that he is used to connecting to Windows shares is by opening a new Explorer window and just typing "\\NameOfShare\SharedVolume". He knows that he can browse through the network, but REALLY wants a way to quickly and easily open up a share. Does anyone know of any apps out there that will accomplish something similar, possibly even allowing a Windows convert to type "\\NameOfShare\SharedVolume"?
Thanks in advance!
15" PowerBook G4 1.25GHz Mac OS X (10.4.5) 3 years old and still going strong!

From the Finder, choose Go, Connect to Server. In the Server Address: space type in:
smb://NameOfShare/SharedVolume
Note forward slashes, not backslashes. In *nix variants backslash is an escape character. Type in your password, and the share will be mounted on the desktop.

Mount a windows share

Hi everybody...I have a simple question...how can I mount a windows
partition on a sparc solaris system?
are there any program like smbmount on linux?would be better if could be free...thanks a lot..David

as far as I know, the (simple) answer is: no.
Linux kernel supports a file system called smbfs, which is required to mount windows shares.
There is no smbfs under Solaris, so smbmount isn't available.

Auto-mounting Windows shares at login?

When I bring my PowerBook to work, there are five different Windows shares I need to connect to in order to access all my files. I've added the shares to my Login Items under my account in System Preferences, so they connect automatically every time I log in.
The only problem is that this opens a separate Finder window for each connection. I'd like to just have it connect to the shares in the background without opening any new windows. Is there any way to do this? I tried checking the "hide" checkbox in Login Items, but it didn't make a difference.

I discovered a better solution - if you make an Automator action (get specified servers > connect to servers), it won't open any new Finder windows.
So I created the action, filled it in with the 5 servers I need to connect to, saved it as an application, and added it to my login items. Now when I log in, I just get a dialog for each server asking for my username/password, and it connects to each in the background without opening any windows.

Hi, I am using my icloud on my iphone but am unable to find it on my mac book pro. It's not under my system preferences like it shows under the setup. Can I download it again? Or something. I just need to backup some files on my computer and am unable.

Hi, I am using my icloud on my iphone but am unable to find it on my mac book pro. It's not under my system preferences like it shows under the setup. Can I download it again? Or something. I just need to backup some files on my computer and am unable.

The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is now non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

Outlook 2013 - Password change breaks S/MIME Certs "An error occurred in the underlying security system. Key not valid for us in specified state."

AD password change comes up, user changes password.
Tries to send signed or encrypted email with a Comodo S/MIME certificate, and gets the following error:
""An error occurred in the underlying security system. Key not valid for us in specified state."
I now have two reports of this error - one on Windows 7, and one on Windows 8.0 (remote user).
The one on Windows 8.0, we tried removing their S/MIME cert from Outlook/Windows and re-adding, this did NOT resolve the issue.
Plan was originally to have the 8.0 user ship their machine in, and wipe it, since nothing else could fix it and I wasn't finding anyone else with the same issue. Now that I've got a second user with the same issue, its looking like a bug/issue and
not a random glitch.
Thanks in advance for any and all help with this!

Hi,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Apps to Windows share under unsecure system/workstation objects

Similar Messages

Maybe you are looking for