Apps transfer and authorization issues

I have nearly 100 apps on my iPhone 3 that I need to transfer to my iTunes account. Despite authorizing my computer, it keeps asking me to re-enter my details and won't start the sync from my iPhone. Going round and round in circles - what do I do?

Same here, I have an iPhone 6. After updating to 8.3 the phone started to lag, the battery consumption went crazy, the phone started to overheat and the games started to stutter and freeze for short periods of time. From what I've read on the internet this update is good for 5s or lower models but for 6 and 6+ it's a lot worse. This is unacceptable since Apple has only 5 phone models compatible with iOS 8 and they have all the resources and time to make the things bette.

Similar Messages

Can anyone help me with app download and update issue

please see attached link to thread i think i posted my question in the wrong place
https://discussions.apple.com/message/19978622#19978622

You posted in the correct forum last time and this time.
Yes if does seem as though too many users are experiencing these issues. I don't know if any of these steps will help you. At one time or another, all of these have worked for other users, so maybe one will work for you. You already tried changing the date ahead, so I didn't include that in my boilerplate response here - which you can probably find 20 times on the iPad discussion site by now.
I don't know if you have seen this one yet....
Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
If the downloads are stalled or "waiting" - try these suggestions.
Or this ...
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

Lenovo a7000 Messaging app lagging and slowness issue

Hi friends , i do have Lenovo a7000 . since the 1st update i am facing a severe problem of messaging apps lagging and taking too much time to open the messaging app . I found out the Issue of this problem that since they introduced star marke near the name of the thread this problem started and since then this problem persists . so if any one if still facing this issue please do tell me . and lenovo JAMEZ Please provide a solution to this issue as it takes to much time to open banking secure sms which gives us very less time to enter authentication code. Lenovo team please remove that Star near messaging thread nad please help us out as now a days all the banks do send authentication codes with a limited time to enter it. so James and lenovo team please resolve the isse ASAP . and I request other users who have same problem to post here so that we can know how many people are affected.

yes Bhavesh i am totally disopointed its very poor support lenovo people first two days iam happy 3 day starting struggle becouse i updated s142 update. i am great fan of asphalt 8 but gameloft mod apk was not istalling.what necessary about Octocore proccessor 2 gb ram not installing mod apps totally waste of money this is not a mobile just like iron box

App catlog and bluetooth issue

hello sir i m from india ijust brought a palm pre 2 unlcoked p102una version actully i m new wid ths os so i dnt knw how to download aapppss .. And its app caltog is also locked every time i open it it says action could not be completd try again later .. plsss help mee out and pls tell me how to install apps in palm pre and there is also one more prob with its bluetooh cant send or recive file with other phone to my palm pre thnksss in advanceee ...
Post relates to: Pre 2 p102una (Unlocked NA)

The reason that it can not transfer files over Bluetooth is that the profile required for that functionality is not included with the Pre (it's never been included with any webOS device unfortunately).
What is the exact error message you get when trying to access the App Catalog?

Apps crashing and connectivity issues with 8.3

Has anyone else been experiencing these issues after updating to 8.3?
- Multiple apps crashing upon startup of the app (according to release notes it was supposed to improve this but made it worse)
- intermittent Bluetooth connectivity when playing music via Bluetooth in a vehicle
- Touch ID intermittently working in app store
I made the switch back to Apple and am regretting it immensely. They put out numerous betas of this update before release and still couldn't get it right. They make millions but seems they need to invest in software engineers more than watch designers that are just imitating what's already been out. So much for innovation. Please get this fixed ASAP

Same here, I have an iPhone 6. After updating to 8.3 the phone started to lag, the battery consumption went crazy, the phone started to overheat and the games started to stutter and freeze for short periods of time. From what I've read on the internet this update is good for 5s or lower models but for 6 and 6+ it's a lot worse. This is unacceptable since Apple has only 5 phone models compatible with iOS 8 and they have all the resources and time to make the things bette.

Transfer and sms issues

1) How can i transfer music and pictures from my computer (itunes) to my iphone.
2) How can i get delivery messages when i send sms

Sms problem solved on http://www.ardorpes.com/2009/03/02/how-to-change-message-centre-number-on-apple- iphone/comment-page-1/#comment-1114

Sharing and Authorization Issues - Re-Post

I posted this and it was viewed but not responded to. Does anyone have any ideas?
My spouse and I share music that we purchase, but with the use of iTunes, it has been very difficult. Unfortunately, I started using my own ID over a year ago and my spouse started using his own ID over the past 2 months. I say "unfortunately" because it has been extremely difficult merging the ID's and keeping all of the songs in one place on one computer and having them all recognized as music that we have already paid for. We are having all sorts of technical problems within iTunes associated with this issue. We have 2 laptops and 1 desktop. I also changed my ID about 6 months ago.
Here's a summary of the technical issues:
1.) When we try to keep all of the songs on the desktop and sync up our iPods to that computer, some of the songs that I purchased over the last year are not loading into the iPods and are not recognized in the database on that computer.
2.) When my spouse does find those songs on my computer (via network) to play on his laptop, iTunes goes to check if the song is authorized to play on his computer. When he uses my old ID and password, it does not accept it and presents him with my new ID. These songs were purchased with my old ID. Whatever he puts in, the new ID and password or old ID and password, it does not accept it. Uggh!
Anyone have any ideas? Does anyone have a procedure for doing this correctly?

If it was viewed but not replied to, all that means is, whoever looked at it probably didn't know the answer.
This is a user-to-user forum.
Check this out
http://docs.info.apple.com/article.html?artnum=300432

OSX Lion and Preview issue

Hello, recently I've bought Lion on mac app store and a issue of preview is freaking me out.
With Snow Leopard, when I open a .pdf file, edit it (example: deleting a page) and save it, a bar shows the progress of the saving. But when I do the same on Lion, the bar does not appear and the preview crashes. I already sended the report for apple, but I wanna know if someone can try this on your system and see what you got.
Thanks

so do i... same symptoms...
and
my macbook crashed preview, textedit, and the most bad thing is installer....
OMG
what should i do???
somebody help me..

Weblogic 8.1 App Server and IBM MQ Series 5.2 Issue

Hi All,
          I am trying to create a bridge between Weblogic 8.1 App Server and IBM MQ Series 5.2 and i am facing issues.
          Bridge works fine if i use QualityOfService="Atmost-once" and i am getting following error when i use
          QualityOfService="Duplicate-okay".
          Error:
          <Oct 16, 2003 6:03:35 PM PDT> <Error> <MessagingBridge> <BEA-200015> <An error occurred in bridge "MQSeries WebLogic Bridge" during the transfer of messages (java.lang.Exception: weblogic.jms.adapter.JMSConnectionHandle.acknowledge(Ljavax/jms/MessageV).>
          <Oct 16, 2003 6:03:35 PM PDT> <Warning> <MessagingBridge> <BEA-200026> <Bridge "MQSeries WebLogic Bridge" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was weblogic.jms.bridge.internal.MessagingBridgeException.)>
          Any suggestions or comments will be really appreciated.
          Thanks
          Suresh


It is weird that nothing shows up in the log after you turned on the debug.
          Actually I knew somebody has run into the same problem once.
          The problem disappeared after he did something on the MQSeries side (like
          restart the system and something else). I did not know exactly what he did.
          I am not sure if that will help you but worth trying.
          If that does work either, I'd suggest that you contact the BEA Customer Support
          and somebody will look at it for you in depth.
          Thanks,
          Dongbo
          Suresh wrote:
          > Thanks for following up on this.
          >
          > This bridge works with 6.1 app server and we are trying to use the same stuff
          > for 8.1 app server too. No, we are not using XAConnectionFactory.
          >
          > Suresh
          >
          > Dongbo Xiao <[email protected]> wrote:
          > >Is there any chance that the JMS connection factory on the MQSeries
          > >side is a XAConnectionFactory?
          > >
          > >Suresh wrote:
          > >
          > >> I am using the debug options (-Dweblogic.Debug.DebugMessagingBridgeStartup="true"
          > >> -Dweblogic.Debug.DebugMessagingBridgeRuntime="true") in my stratip
          > >script,
          > >> but, thats the maximum stack trace I can get. I am using jms-notran-adp.rar
          > >for
          > >> both QOS. Bridge is working fine when I use Exactly-once and repeatedly
          > >getting
          > >> the same message when I use Duplicate_okay. My destination queue is
          > >not able to
          > >> ackowledge the messge to the sender.
          > >>
          > >> Here I am giving nodes from my config.xml
          > >>
          > >> <MessagingBridge AsyncEnabled="false" BatchInterval="40000"
          > >> Name="MQSeries WebLogic Bridge"
          > >> QualityOfService="Duplicate-okay"
          > >> SourceDestination="MQSeries Inbound Destination" Started="true"
          > >> TargetDestination="WebLogic Inbound Destination" Targets="myserver"/>
          > >> <JMSBridgeDestination
          > >> AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDINoTX"
          > >> ConnectionFactoryJNDIName="jms.InboundMessageConnectionFactory"
          > >> ConnectionURL="t3://myserver:7001"
          > >> DestinationJNDIName="jms.InboundMessageQueue"
          > >> DestinationType="Queue"
          > >> InitialContextFactory="weblogic.jndi.WLInitialContextFactory"
          > >> Name="WebLogic Inbound Destination" UserName="username" UserPassword="pwd"/>
          > >> <JMSBridgeDestination
          > >> AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDINoTX"
          > >> ConnectionFactoryJNDIName="cn=MQ_BROKER_1,ou=inboundConnectionFactories,ou=mqseries,ou=jms,ou=Systems"
          > >> ConnectionURL="ldap://ldapServer:389/o=myroot"
          > >> DestinationJNDIName="cn=queue2,ou=queue,ou=mqseries,ou=jms,ou=Systems"
          > >> InitialContextFactory="com.sun.jndi.ldap.LdapCtxFactory"
          > >> Name="MQSeries Inbound Destination"
          > >> UserName="cn=admin,o=myroot" UserPassword="pwd"/>
          > >> <Application Name="jms-notran-adp"
          > >> Path="C:\bea\weblogic81\server\lib" StagingMode="nostage" TwoPhase="true">
          > >> <ConnectorComponent Name="jms-notran-adp"
          > >> Targets="rdoddapaneni3" URI="jms-notran-adp.rar"/>
          > >> </Application>
          > >>
          > >> Thanks
          > >>
          > >> Tom Barnes <[email protected]> wrote:
          > >> >By the way, if you are looking to improve performance, transactional
          > >> >mode may actually be the fastest. See the JMS Performance
          > >> >Guide white-paper on dev2dev for details.
          > >> >
          > >> >Suresh wrote:
          > >> >
          > >> >> Hi All,
          > >> >>
          > >> >> I am trying to create a bridge between Weblogic 8.1 App Server and
          > >> >IBM MQ Series 5.2 and i am facing issues.
          > >> >>
          > >> >> Bridge works fine if i use QualityOfService="Atmost-once" and i
          > >am
          > >> >getting following error when i use
          > >> >> QualityOfService="Duplicate-okay".
          > >> >>
          > >> >> Error:
          > >> >>
          > >> >> <Oct 16, 2003 6:03:35 PM PDT> <Error> <MessagingBridge> <BEA-200015>
          > >> ><An error occurred in bridge "MQSeries WebLogic Bridge" during the
          > >transfer
          > >> >of messages (java.lang.Exception: weblogic.jms.adapter.JMSConnectionHandle.acknowledge(Ljavax/jms/MessageV).>
          > >> >
          > >> >> <Oct 16, 2003 6:03:35 PM PDT> <Warning> <MessagingBridge> <BEA-200026>
          > >> ><Bridge "MQSeries WebLogic Bridge" encountered some problems in one
          > >> >of its adapters or underlying systems. It stopped transferring messages
          > >> >and will try to reconnect to the adapters shortly. (The exception
          > >caught
          > >> >was weblogic.jms.bridge.internal.MessagingBridgeException.)>
          > >> >>
          > >> >> Any suggestions or comments will be really appreciated.
          > >> >>
          > >> >> Thanks
          > >> >> Suresh
          > >> >
          > >

SharePoint Foundation 2013 - Search Configuration Issue - 2 App Servers and 2 Front-End Servers

Hi,
We have a SharePoint Foundation 2013 with SP1 Environment.
In that, we have 2 Front-End Servers and 2 App Servers. In the Front-End Servers, the Search Service is stopped and is in Disabled state and in the 2 App Servers in One App Server, Search is Online and in another Search is Starting but goes to Stopped sooon
after.
Originally, we had only 1 App Server and we were running our Search Service and Search Service Application in that. Now since the index location became full and we were unable to increase the drive there, we added one more App Server and now the issue is
Search is not properly getting configured in either of these App servers. What we want to do is run Search only in the new App Server, because we have a lot of storage space for Index locations here, but in the older App Server, not run Search at all. We
tried keeping the Search Service disabled and ran the below PowerShell Scripts, but none of the ones are working. These scripts are creating the Search Service Application, but the error of "Admin Component is not Online", "Could not connect
to the machine hosting SharePoint 2013 admin component" is coming up.
http://www.funwithsharepoint.com/provision-search-for-sharepoint-foundation-2013-using-powershell-with-clean-db-names/
http://blog.falchionconsulting.com/index.php/2013/02/provisioning-search-on-sharepoint-2013-foundation-using-powershell/
http://blog.ciaops.com/2012/12/search-service-on-foundation-2013.html
Can I get some help please?
Karthick S

Hi Karthick,
For your issue, could you provide the
detail error message of ULS log to determine the exact cause of the error?
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
For troubleshooting your issue, you can try to run the SharePoint Products Configuration Wizard on your WFE servers and run the script for configuring the search service on SharePoint
Foundation:
[string]$farmAcct = "DOMAIN\service_Account"
[string]$serviceAppName = "Search Service Application"
Function WriteLine
Write-Host -ForegroundColor White "--------------------------------------------------------------"
Function ActivateAndConfigureSearchService
Try
# Based on this script : http://blog.falchionconsulting.com/index.php/2013/02/provisioning-search-on-sharepoint-2013-foundation-using-powershell/
Write-Host -ForegroundColor White " --> Configure the SharePoint Foundation Search Service -", $env:computername
Start-SPEnterpriseSearchServiceInstance $env:computername
Start-SPEnterpriseSearchQueryAndSiteSettingsServiceInstance $env:computername
$appPool = Get-SPManagedAccount -Identity $farmAcct
New-SPServiceApplicationPool -Name SeachApplication_AppPool -Account $appPool -Verbose
$saAppPool = Get-SPServiceApplicationPool -Identity SeachApplication_AppPool
$svcPool = $saAppPool
$adminPool = $saAppPool
$searchServiceInstance = Get-SPEnterpriseSearchServiceInstance $env:computername
$searchService = $searchServiceInstance.Service
$bindings = @("InvokeMethod", "NonPublic", "Instance")
$types = @([string],
[Type],
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool],
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool])
$values = @($serviceAppName,
[Microsoft.Office.Server.Search.Administration.SearchServiceApplication],
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool]$svcPool,
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool]$adminPool)
$methodInfo = $searchService.GetType().GetMethod("CreateApplicationWithDefaultTopology", $bindings, $null, $types, $null)
$searchServiceApp = $methodInfo.Invoke($searchService, $values)
$searchProxy = New-SPEnterpriseSearchServiceApplicationProxy -Name "$serviceAppName - Proxy" -SearchApplication $searchServiceApp
$searchServiceApp.Provision()
catch [system.exception]
Write-Host -ForegroundColor Yellow " ->> Activate And Configure Search Service caught a system exception"
Write-Host -ForegroundColor Red "Exception Message:", $_.Exception.ToString()
finally
WriteLine
ActivateAndConfigureSearchService
Reference:
https://sharepointpsscripts.codeplex.com/releases/view/112556
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Eric Tao
TechNet Community Support

An issue with authentication and authorization on ISE 1.2

Hi, I'm new to ISE.
I have an issue with authentication and authorization.
I have ISE 1.2 plus patch 6 installed on VMware.
I have built-in Windows XP supplicant and 2960 cisco switch with IOS c2960-lanbasek9-mz.150-2.SE5.bin
On supplicant I use EAP(PEAP) with EAP-MSCHAP v2.
I created authentication and authorization rules with Active Directory as External Identity Source. Also I applied authorization profile with DACL.I login on Windows XP machine under different Active Directory accounts. Everything works fine (authentication, authorization ), but only for several hours. After several hours passed , authentication and authorization stop working . I can see that ISE trying authenticate and authorize users, but ISE always use only one account for authentication and authorization . Even if I login under different accounts ISE continue to use only one last account.
I traied to reboot switch and PC,but it didn’t help. Only rebooting of ISE helps. After ISE rebooting, authentication and authorization start to work properly for several hours.
I don’t understand is it a glitch or I misconfigured ISE or switch, supplicant?
What should I do to resolve this issue?
Switch configuration:
testISE#sh runn
Building configuration...
Current configuration : 7103 bytes
! Last configuration change at 12:20:15Tue Apr 15 2014
! NVRAM config last updated at 10:35:02 Tue Apr 15 2014
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname testISE
boot-start-marker
boot-end-marker
no logging console
logging monitor informational
enable secret 5 ************
enable password ********
username radius-test password 0 ********
username admin privilege 15 secret 5 ******************
aaa new-model
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa authorization auth-proxy default group radius
aaa accounting update periodic 5
aaa accounting dot1x default start-stop group radius
aaa server radius dynamic-author
client 172.16.0.90 server-key ********
aaa session-id common
clock timezone 4 0
system mtu routing 1500
authentication mac-move permit
ip dhcp snooping vlan 1,22
ip dhcp snooping
ip domain-name elauloks
ip device tracking probe use-svi
ip device tracking
epm logging
crypto pki trustpoint TP-self-signed-1888913408
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1888913408
revocation-check none
rsakeypair TP-self-signed-1888913408
crypto pki certificate chain TP-self-signed-1888913408
dot1x system-auth-control
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
ip ssh version 2
interface FastEthernet0/5
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/6
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/7
interface Vlan1
ip address 172.16.0.204 255.255.240.0
no ip route-cache
ip default-gateway 172.16.0.1
ip http server
ip http secure-server
ip access-list extended ACL-ALLOW
deny icmp any host 172.16.0.1
permit ip any any
ip radius source-interface Vlan1
logging origin-id ip
logging source-interface Vlan1
logging host 172.16.0.90 transport udp port 20514
snmp-server community public RO
snmp-server community ciscoro RO
snmp-server trap-source Vlan1
snmp-server source-interface informs Vlan1
snmp-server enable traps snmp linkdown linkup
snmp-server enable traps mac-notification change move
snmp-server host 172.16.0.90 ciscoro
radius-server attribute 6 on-for-login-auth
radius-server attribute 6 support-multiple
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 5 tries 3
radius-server vsa send accounting
radius-server vsa send authentication
radius server ISE-Alex
address ipv4 172.16.0.90 auth-port 1812 acct-port 1813
automate-tester username radius-test idle-time 15
key ******
ntp server 172.16.0.1
ntp server 172.16.0.5
end

Yes. Tried that (several times) didn't work. 5 people in my office, all with vers. 6.0.1 couldn't access their gmail accounts. Kept getting error message that username and password invalid. Finally solved the issue by using Microsoft Exchange and "m.google.com" as server and domain and that the trick. Think there is an issue with imap.gmail.com and IOS 6.0.1. I'm sure the 5 of us suddently experiencing this issue aren't the only ones. Apple will figure it out. Thanks.

I did not authorize 2 in app purchases and because my credit card is at its limit, and i dont know how to reverse the in app purchases, i cannot update any app or do just about anything in the appstore or itunes store. I paid for apps, i demand my updates

I did not authorize 2 in app purchases and because my credit card is at its limit, and i dont know how to reverse the in app purchases, i cannot update any app or do just about anything in the appstore or itunes store. I dont care if i owe apple's itunes appstore a few dollars over 2 in app purchases i never meant to download in fact the whole app itself i wanted to delete...but out of the hundreds (maybe lower thousands) fof dollars in music and apps and whatever else, that i rightfully purchased over the passed couple of years....should *NOT* have the upgrades and/or previous purchased songs withheld from me over $3 in accidently purchased add ons through an existing app i deleted an disliked anyway

Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"

When I open Muse, I get a message that a new update is available. When I hit install it just closes and nothing happens. Then I got a message I needed Adobe Creative Cloud App to resolve the issue. I downloaded a copy of Creative Cloud desktop but it

When I open Muse, I get a message that a new update is available. When I hit install it just closes and nothing happens. Then I got a message I needed Adobe Creative Cloud App to resolve the issue. I downloaded a copy of Creative Cloud desktop but it says that my Muse is up to date. It was last updated in May but you have a new update today and it will not update. I thought maybe I am not suppose to have the Creative Cloud update because all I have is the individual app Muse and the photography program. So I uninstalled the CC desktop. Then when I open Muse it says I need the CC desktop to help with the update. So I get stopped either way. Now I also had a Pre-Release Muse on my computer and I don't know if that complicated things. Please advise.

All future installs/updates of Muse (and most other Adobe apps) are through the Creative Cloud desktop app. Thus you do need to have it installed.
Are you on Windows or Mac? What OS version?

TS1702 i have purchaced many apps from the app store, and now after updating my phone to iOS 6, the apps sitting in my library in iTunes wont transfer to my phone anymore? Says that the apps can not be found. The appstore says i have no bought apps either

I have previously bout about 30-40 apps from the app store. After a recent update to the newest version of iOS (and a reset back to factory standards), i find that i cant put any of the apps from my iTunes library, back onto my phone!? When i try, it says that the apps location cant be found!? I tried going into the app store and in the app section going into 'Purchaces', in the hope that i could just re-install them from there (because i have already paid for them), but in there, it tells me that there are NO apps in my purchaces list!? This is quite concerning because i have spent quite a bit of money on these apps, that now seem to be un-usable?! Ican still put all my music on my phone through iTunes liuke normal, but Podcasts are doing the same thing as the apps?! Can someone please help me, or suggest what to do because im really getting frustrated. I really like my iPhone, but if this is what is going to keep happening, i think ill change to an Android phone. . . . .

Thanks too all the people who responded. . . . (noone)
Got it sorted though. Seems that Apple has issues with multiple apple id's.
Seems i had to somehow remember and use the original id i had when i first bought my 1st iPhone. . . .
Even after that it was extremely hard to get my apps back on my PC.
If anyone else has the same problem. . . .email Apple. Cya.

HT1296 When i attempt to sync my iphone it continues to say this computer is no longer authorized for apps and they will be deleted?? I don't understand?? I put my password and authorize but same message comes up. What to do??

When i attempt to sync my iphone it continues to say this computer is no longer authorized for apps and they will be deleted?? I don't understand?? I put my password and authorize but same message comes up. What to do??

I found the solution in another post. By deleting all my apps, I was able to sync the phone. I hope I don't have to delete all my apps every time I want to sync my phone, but at least now I am able to sync my phone.

Apps transfer and authorization issues

Similar Messages

Maybe you are looking for