Apps won't appear after being downloaded

After I downloaded a few apps, they wouldn't appear on my screen. I went into the App Store and tapped Open but it still would not open or appear on the screen. Any solutions?

If they are "waiting" then:
http://lifehacker.com/5948155/fix-iphone-apps-stuck-waiting-during-installation
Otherwise
Try:
- Reset the iOS device. Nothing will be lost       
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Download the apps on computer and sync
- Restore from backup. See:                                                
iOS: How to back up                                                                                     
- Restore to factory settings/new iOS device.             

Similar Messages

  • Apps won't sync after being updated

    Following the on-screen instructions I downloaded the updates for four apps. Now the updated apps simply won't sync. If I tick the boxes to sync the apps and press apply the other apps sync normally but the ticks just disappear from the updated ones and they don't sync. I've tried all the usual Apple support advice and it still happens. Any ideas anyone?

    I've answered my own question.
    I tried resetting and everything else recommended by Apple and nothing worked. Then, last night, iTunes finally let me download the latest operating system and all the updated apps synced normally. App providers should make it clear if upgrades don't work without the latest operating system.

  • Why wont my purchased apps open after being downloaded"

    Why wont my apps open after being downloaded?

    They appear to be fully downloaded, they just wont open.
    They are mainly games!

  • My i-Pad2 won't charge after I downloaded some new stuff from i-Tunes.  A note appears on the screen "Charging is not supported with this accessory".  I have tried charging through two computers and with the wall socket plug (with another cable).  I have

    My i-Pad won't charge after I downloaded some stuff from i-Tunes.  I have tried charging through two computers and using the wall socket,, with different cables.  I have turned the i-Pad off & on a couple of times but it still won't charge.  Any ideas will be gratefully received.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Pages won't open after I downloaded some of your updates. HELP

    Pages won't open after I downloaded some Apple Updates

    First, we are all just users like yourself so it's not "your" updates. Which updates have you applied & in what order?
    Quite a few users have had problems. From what I've read of those who have had success, this is what I suggest. It all depends on how you obtained Pages in the first place.
    If you bought Pages from the Mac App Store:
    Delete the Pages.app from your Applications folder. You will need to enter your password to do so.
    Launch Mac App Store  & click on Purchases. You should now see an INSTALL button. Click that, enter your password, if necessary, & you should now have the latest version.
    If you installed Pages from a retail box or purchased a license from the downloaded trial:
    First, you must make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. All three applications must be in the iWork '09 folder in Applications. That iWork folder must be named iWork '09. If it doesn't have the '09 Software Update won't find them & the updaters won't work.
    Now, choose Software Update from the Apple menu, from System Preferences or launch the Mac App Store & click Updates. You should get a window similar to this screenshot. Now click the Update button next to iWork 9.2.
    Alternatively, you can download the standalone update here. http://support.apple.com/kb/DL1563

  • MP3 won't open after I download from website

    MP3 won't open after I download from website?

    Are you getting an error message?  What does it say?  Which app are you using to open?  Mac comes w/several options.

  • Problems with syncing Ipad with ITunes: apps won't appear on Ipad and organizing icons won't save

    I have a new Ipad 4 for three weeks. Yesterday I start having some problems with syncing my Ipad with ITunes (earlier all was without troubles):
    - downloaded in ITunes on PC apps won't transfer to my Ipad - I press Apply and sync, it goes successfully, but apps won't appear on Ipad.
    - I tried organizing icons on Ipad from PC, press Apply and sync, it all goes succesfully, but on Ipad icons won't rearrange. But ITunes shows that they are rearranged...
    - also I tried syncing my books adding one new book, press sync all books, and new book won't appear. Only when I've chosen every book separately, they transfered.
    I use USB for this.
    I tried resetting my Ipad, reinstalling ITunes on PC, deauthorizing and authorizing my computer, but it didn't help.
    Apple ID are the same on PC and Ipad.
    I hope that I'm not the only one with this problem. And also forgive my mistakes if there are any - English is not my native language. Thank you!

    I know that it is time consuming and a bit of a pain in the butt to have to do it, but I would backup the iPad, restore to factory settings and then restore from the backup, and sync everything back to the device. It's going to take a while because you have a ton of music on the iPad, but IMO, that would be your best option now.
    You could try unsyncing all of the music, and then resync it all again, but that takes time as well. If you are going to spend that much time trying to fix it, you may as well restore the device ...IMO once again.
    Use iTunes to restore your iOS device to factory settings

  • TS2734 my iphone won't beep after being located with find my iphone

    my iphone won't beep after being located with 'find my iphone' app.
    battery is fullly charged. the phone is not muted

    The phone "beeps" only if "Play Sound" is ON and after clicking "Send" (even if no message).  Just locating the phone doesn't make it beep.

  • My apps won't update after installing IOS 6.0.1. They get stuck. What's wrong?

    Apps won't update after installing IOS 6.0.1. They get stuck. What's wrong?

    You may of had a corrupted install. Connect to iTunes backup then restore. Or update the apps on itunes then sync to the iPhone

  • The Mail app is not working after Mavericks download and recent 'fix' for Mail

    The Mail app won't start after upgrade to Mavericks, and needs force quit to close spinning pinwheel. The recent fix Apple offerered doesn't help. What are my options? Thanks

    I am also getting same problem...................anybody please help.

  • My apps won't load after updating to iOS4.3.2. What to do?

    My apps won't load after updating to iOS4.3.2. What to do?

    Yes, I tried that (thanks for the suggestion, though!). In my music app, when I click on certain songs, the screen moves to try to start the song, but then it bounces back to the menu screen without playing the song. On many albums, when I click on the first song, a song about halfway through the album will start to play rather than that first song. My other apps seems to be fixed, but not the music function.

  • My messages app won't open, after I sent a large iMessage. I think it just has too much data on it. What can I do other then reset my iPhone?

    My messages app won't open, after I sent a large iMessage. I think it just has too much data on it. What can I do other then reset my iPhone?

    Hi everyone, I had this problem but none of the solutions above worked. What happened with me, and with others in other forums, is that a particular thread or message was causing the problem. I'd go to open the message and all I'd get was a white screen with the blue bar at the top. So, I went into contacts, pressed 'send message' to a contact whose message wasn't causing the problem, then I pressed back to messages. You then swipe to the left on the thread that's causing the problem, and delete it. Sadly this means you will lose all that person's messages, but you can try opening it from there and deleting it on the thread. Didn't work for me though. Hope that helps! It was the only thing that worked for me after about three days of total frustration and resetting!

  • What happened to ADOBE workspaces files after being downloaded before retirement?

    What happened to ADOBE workspaces files after being downloaded before retirement?

    I had this problem as well! I was working on one of several projects I had, I'm pretty sure they were saved on the computer, my computer started to chug, I reset it, and they ALL disappeared! I can't find any of the files anywhere on the hard drive, but I also can't sign into the cloud to see if they somehow got moved. I reset again, and still nothing.
    When I try to log into the cloud it tells me the sync failed. Since I only just signed up for the subscription I don't know if it's common for it to go down, or what.

  • Start won't appear after clicking start button or win key on keyboard

    It's happened after update to 9926. First start menu works properly but after reboot it broken-down. Right click works fine. Before reboot i disabled "Windows search" service but i don't think it related.

    Start won't appear after clicking the start button or win key on keyboard on the second user account. It works fine on the administrator account. UAC changes have no effect. Re-booting has no effect. Build is 9926

  • How come my apps won't open after updating to ios5

    how come my apps won't open after updating to ios5?

    Thanks for the feedback.  This is a custom enterprise application.   So there is not an update yet.   It will take our developer a little time to get it IOS 5 compatiable.  So unless I can change the IOS we can't use application until we get upgrade of the custom app.

Maybe you are looking for

  • 23" HD Display with PC, will this work?

    I am looking to get a good deal on a 23" HD Display. It's from a company that is going out of business and they have a few left. A few quick questions, the sooner I can get answers the sooner/most likely I'll be able to get one: 1) is there a serial

  • Event ID 6038 LsaSrv NTLM authentication warning

    Searching the internets we haven't found any other references to this particular Event ID Warning message.  It's likely new in Windows Server 2012, we are part of an Active Directory that is at Forest Functional Level:  Windows Server 2008, but out C

  • BAPI Contract, input structure for "Contract data" ?

    Hi All, I am trying to create contract using BAPI:BAPI_CONTRACT_CREATEFROMDATA. But I am not able to find the structure to fill Header tab "Contract data" like - contract start date - contract end date - Val.period.category - Contractval.period and s

  • Make firefox use Java 5

    My computer uses windows 98se and the latest version of Java that will work on this machine is 5 22. I can not update to a higher Firefox or Java or OS. How can I make my fire fox 3 6 28 work with java 5. It always says that my plug in is blocked and

  • Sales order item 1 values are getting deleted

    HI, when i am creating sales order with material variants the dimension values( legth ,width ) for the first item are getting delted. it is happening after the BAPI_SALESORDER_CHANGE executed for  the second item. where could be the problem. is any f