Apps won't sync after windows 7 install

Everything else seems to sync just fine.
Apps show up in itunes but when I try to click on them and apply it goes through the motions but won't put them on the phone.
Anyone have a clue of what I am doing wrong?

Does your music, if you have any, sync?

Similar Messages

  • Some Apps Won't Sync After Restore

    I ran a restore on my iPod Touch, and after it completed most of my apps will not sync.
    Everything worked prior to the restore (Facebook, Netflix, Twitter, etc), but none of these will sync to the iPod at all. Some of my apps (Angry Birds, ESPN, Solitaire) sync just fine.
    Music and Podcasts sync fine.
    I deauthorized and reauthorized my PC (running Windows XP)
    I ensured the Sync Apps box is checked
    Restrictions on the iPod are Off
    There is over 600MB of space available on the iPod
    I checked for App updates, none were available
    I rolled back from iTune 10.7 to 10.6.3
    I reset the iPod using the power & home buttons
    I ran another restore
    None of these were successful.
    The iPod Touch is running version 4.2.1 (this the latest this generation of Touch will update to)
    I attempted to download both the Facebook and Netflix apps directly onto the iPod via wifi, and they say iOS 5 is necessary; this was not the case previously.
    Any ideas? Thanks

    As Ingo2711 said, the developers have updated many or their apps and the updated apps are no longer comnpatible with earlier iOS.
    FB now requires:
    Requirements: Compatible with iPhone, iPod touch, and iPad. Requires iOS 4.3 or later. This app is optimized for iPhone 5.

  • Z580 won't boot after Windows 7 Install

    Hi,
    After a clean install of windows 7 on the hard drive, Lenovo Z580 wont boot up but when hard drive it put into my old Acer laptop, boots fine. 
    Initially had to remove the hard drive from the Lenovo and put into another laptop to install windows 7 as lenovo wouldnt boot from usb or CD. And then after install tried putting hard drive back into Lenovo and just doesn't boot at all. Just goes to boot manager sceen and then blank in a continous loop.
    Please help! 
    Thanks in advance!

    Welcome to the forum!
    "remove the hard drive from the Lenovo and put into another laptop to install windows "
    You stated the exact reason for your problem.  You can't install Windows 7 on one laptop and expect it run on another by swapping the hard drive.  It doesn't work.  During the installation Windows inventories the installed hardware and configures itself accordingly.  Since they are two different machines, Windows won't boot.  You are going to have to resolve the USB or Optical drive boot problem on the Lenovo laptop you wish to install Windows on.  
    During bootup have you tried using the Boot Menu to boot the machine specifically from the optical drive?
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • Apps won't sync after being updated

    Following the on-screen instructions I downloaded the updates for four apps. Now the updated apps simply won't sync. If I tick the boxes to sync the apps and press apply the other apps sync normally but the ticks just disappear from the updated ones and they don't sync. I've tried all the usual Apple support advice and it still happens. Any ideas anyone?

    I've answered my own question.
    I tried resetting and everything else recommended by Apple and nothing worked. Then, last night, iTunes finally let me download the latest operating system and all the updated apps synced normally. App providers should make it clear if upgrades don't work without the latest operating system.

  • IWork apps won't launch after new HD installed

    My hard drive was failing so all files were backed up to an external hard drive (don't know what method - the Mac store did it for me) then moved to the new hard drive. Now the iWork apps won't launch. Doesn't matter which account I use and makes no difference if I boot in Safe Mode. I've updated iWork and still no difference. The icon flashes a couple of times on the dock, then disappears. Any suggestions would be greatly appreciated.

    When you say you updated iWorks are you talking about the update a few days ago? How about just reinstalling the applications?

  • Apps won't sync after restore

    I have been fighting one problem after another for two days. Finally got my ipod touch restored. I have synced everything but my apps. Progress line indicates apps are being installed but when finished there are no apps. I am overwhelmed by the responses when I search for the problem. Sorry to ask for help without thoroughly researching but it is late and I'm frustrated. Thanks.

    All that seemed to be OK but next attempt to sync worked. However, several of my apps stored data and all of that is gone. I can reenter some of it but a lot of it is historical info that is simply gone unless I can find it somewhere. Any chance of getting my data back? Thanks.

  • Computer won't boot after windows 7 install.... :( [Solved]

    I have 2 hard drives. The first drive is my main arch linux install. The second drive I use to install various operating systems. My school was selling windows7 for $30...I couldn't resist the cheap price...now I'm paying for it ><
    I unplugged the hard drive with my arch linux install from my computer. (sda) Then installed windows 7 on the second hard drive. I reattached the first hard drive to my computer. (this was so i could avoid having to re-install grub)
    My computer would not boot. I decided to install linux mint -- something I was going to do anyway -- that way I could boot into arch linux and fix things. Mint installed fine. But my computer STILL won't boot. I get grub error 22. What's up with that? Is this something to do with windows7?
    Hard Drives:
    /dev/sda1 ext2 /boot 100 MB
    /dev/sda2 extended
    /dev/sda5 ext3 arch / 130 GB
    /dev/sda3 ext3 arch /home 166 GB
    /dev/sda4 swap 1.72 GB
    /dev/sdb1 ntfs windows7 65 GB
    /dev/sdb4 ext3 mint / 19GB
    /dev/sdb2 swap 1GB
    /dev/sdb3 ext3 media 900 GB
    Should I install grub to the MBR?
    I checked to make sure that nothing in my arch linux install was erased using the arch install cd... I really need to get this fixed before classes on monday so any help would be appreciated.
    Last edited by Meskarune (2009-10-31 04:26:39)

    Xyne wrote:Then again, when you buy Windows, I suppose you're looking for the authentic Windows experience.
    I was going to say, even at $30 you still managed to get the full windows experience at first boot!
    Meskarune wrote:PS. I heard that windows will override the MBR when it updates... so consequently it is bad to install grub to the MBR in a dual boot system. Will I have to be reinstalling grub all the time?
    God i hope not.  just stay away from windows if that happens
    just thinking about tihs is giving me headaches.
    Last edited by toxygen (2009-10-31 03:06:12)

  • Lenovo Easy Cam Won't work after Windows 10 install

     I have a V570 Lenovo laptop on which I just installed Windows 10. After the install, I found that my camera no longer works -- it's the Lenovo Easy Cam. I tried driver updates. Apparently the drivers were downloaded but failed to install. I can't figure out HOW to get them to install. I tried the device manager. I also took a look with Lenovo Solutions. It says the camera is disabled, but it doesn't tell me how to re-enable it. I'm at a loss. How can I get my camera to work with Windows 10? Thanks.

    Hi Swahili1,I have a Lenovo Ideapad Y570 and I have also recently upgraded from Windows 7 Professional to Windows 10. In fact I had the same problem as other persons i.e., the easy camera of my laptop was disable and I couldn't manage to update the drivers correctly and make it function. I did as you described, with the difference that in my case I couldn’t enable the camera from Device Manager. What I did is that I have only uninstalled the program of the easy camera going to: Control Panel\Programs\Programs and Features and then I have restarted my laptop. As you said most probably, Windows 10 detected the camera and installed the appropriate program and now my camera is functioning. Thanks a lot Swahili1.

  • Lenovo EasyCam Won't work after Windows 10 install

    I have a V570 Lenovo laptop on which I just installed Windows 10. After the install, I found that my camera no longer works -- it's the Lenovo Easy Cam. I tried driver updates. Apparently the drivers were downloaded but failed to install. I can't figure out HOW to get them to install. I tried the device manager. I also took a look with Lenovo Solutions. It says the camera is disabled, but it doesn't tell me how to re-enable it. I'm at a loss. How can I get my camera to work with Windows 10? Thanks.

    Hi Swahili1,I have a Lenovo Ideapad Y570 and I have also recently upgraded from Windows 7 Professional to Windows 10. In fact I had the same problem as other persons i.e., the easy camera of my laptop was disable and I couldn't manage to update the drivers correctly and make it function. I did as you described, with the difference that in my case I couldn’t enable the camera from Device Manager. What I did is that I have only uninstalled the program of the easy camera going to: Control Panel\Programs\Programs and Features and then I have restarted my laptop. As you said most probably, Windows 10 detected the camera and installed the appropriate program and now my camera is functioning. Thanks a lot Swahili1.

  • Lost Use of App Manager and Updates after Windows 8 install

    I recently purchased Windows 8 and now the Adobe Application Manager will not run on my computer.  In addtion, I am unable to update photoshop and several other CS6 programs.  Does anyone have a fix for this?

    A lot of security updates along with .NET 4.5 should be installed before all programs run correctly on your computer. When Windows updates shows no more updates, then you should be good to go as far I'm guessing.

  • Widi won't work after windows 8 install

    Hi,
    I have a Portege R700-S1322W and I just recently downloaded windows 8. I'm trying to install WiDi (it worked before I upgraded to windows 8). I have downloaded all the most recent drivers listed (including 15.5.6.0 Intel® PROSet/Wireless WiFi) and ran the intel driver update utility (the driver I have installed is 8.15.10.2858 and it says "An Intel device was detected but your operating system is not supported by this utility. Please visit Download Center to look for available software."). when I try to install the most recent widi driver, 3.5.41.0, it says "this platform is not compatible with intel(R) Widi or the application is in use". I was successful in installing version 3.0.13.0 of the WiDi driver but when I try to run it there's a message "Intel My WiFi Technology not enabled. Restart the computer and try again", I already checked and My WiFi is enabled. Could you please help? is there any older drivers that i could run to allow my WiDi to work or is there anything I could do with my settings? Will you be coming out with any WiDi updates for my system?
    Thanks

    Apparently you didn't check the Toshiba Windows 8 Upgrade Assistant. That machine is not supported for Windows 8 so Toshiba is very unlikely to issue a WiDi driver for it.
    C.B.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • IPhone won't sync after Windows 7 operating system upgrade

    I have upgraded my operating system of Windows 7. I reinstalled Itunes and now I can't get it sync with my IPhone 3G. I can manually drag files to my IPhone but when I sync it appears to sync but now music or video files are copied over to it. However applications and photos do copy.
    Further, I have an Ipod Nano that does sync just fine. Any ideas on what is wrong? Anyone?
    Thanks.

    If you're running Win 7 x64 then you most likely need to update the bios...the biggest issue is with Gigabyte Mother boards running intel chipsets...
    Updating bios resolves 99% of those machines...others depending on their configuration don't resolve with the bios update and the only known work around right now is to run is Vista or XP compatibility mode when opening iTunes

  • My apps won't update after installing IOS 6.0.1. They get stuck. What's wrong?

    Apps won't update after installing IOS 6.0.1. They get stuck. What's wrong?

    You may of had a corrupted install. Connect to iTunes backup then restore. Or update the apps on itunes then sync to the iPhone

  • PLEASE help! Apps won't sync!

    my computer crashed a while ago. I got a backup thing and re-installed iTunes, and i'm having various problems, but my main problem is that my apps won't sync. I go to check the box so I can sync it and it won't allow me to. There is no app store app on my ipod, either. I'm not sure what happened but its really frustrating.

    runsararun wrote:
    okay, that's what I thought. I think she didn't quite understand how much it would mess it up. So does it get complicated after the password?
    My experience, is that Mom's understand way more than you ever give them credit for.  But you don't really find that out until much later in life.  Never discount anything your Mom says.

  • Applications tab doesn't work - apps won't sync

    I'm starting to go a bit bonkers. It's been a while since I updated iTunes, and the Applications tab still doesn't work right. Is it just me? I can't click on anything/manipulate anything in that part of iTunes. And when I download new apps through the app store and tell my iPhone to sync, it doesn't sync the apps, even though "Sync Applications" under the Applications tab is checked.
    I've uninstalled iTunes and reinstalled it. I've restored my iPhone. I've done both things a few times and you know what? Sometimes that makes it work. But if so, it only works one time. I can use the Applications window to check which apps I want synced and move things around onto different screens. But then if I click on another tab/navigate away from that window, it stops working. And I have to restore my iPhone again just to sync my apps.
    Any suggestions? Help? Is it just me that's having this problem? Thanks...
    iTunes version: 9.0.2 (25)
    iPhone software version: 3.1.2

    Wouldn't I lose all my paid apps if I go under a different account?
    Still not working... only when I restore my iPhone to factory settings and reupload everything do I get my new and updated apps and have a working Applications tab. Then, if I quit iTunes and open it again later, I can't manipulate/change anything under the Applications tab, and my apps won't sync with the rest of the stuff on my iPhone. So maybe the solution is to leave iTunes open and my computer on FOREVER.
    I'm seriously getting ticked that this isn't working right. Anyone else have this problem? Or just scuttlebutt and me?

Maybe you are looking for