Appsets disappear after UJS_ACTIVATE_CONTENT in NW7.5

Hi experts,
We had a problem in creating new application sets after upgrading from NW 7 to 7.5. So we decided to use report UJS_ACTIVATE_CONTENT to regenerate APPSHELL. After this report all appsets dissappear in administration login screen. In rsa1 I can see cubes, characteristics etc. but I could not start modifying them in administration screen.
Please see screenshot in http://i47.tinypic.com/15y86mh.jpg
Thanks in advance.
Ergin Ozturk

Hi Ergin,
As already indicated, you need to check the security.
Please login to the appsets with an admin ID, and check the security. See, if your ID has been assigned or not. Check whether you have required task profile or not. Check whether the member access profile is maintained properly or not. After making sure these things are fine, then login to the appset with your ID through connection wizard.
Hope this helps.

Similar Messages

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seco

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.

Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored

DNS Host(A) records disappear after a while

Hi all,
a few weeks ago we started to change the TCP/IP configuration of our printers from "static" to DHCP with reservations. The DHCP server is configured to register forward Host(A) and reverse PTR record on DNS on behalf of (all) clients, both are W2K3 with SP2.
This works well for all our Toshiba printers/copiers and most of our HP printers. However, on a handful of HP printers the Host(A) record in the DNS zone get lost / disappeard after some time, leading into a non working name resolution. But only the Host(A) record, the reverse PTR record is still there. Currently we have this issue with Business InkJet 2800 attached via a JetDirect J3258G to our network.
In the past we noticed, that on another printer the Host(A) record re-appears after some hours, only to disappear after a while again. These intervals last some hours up to one day, but seem to follow no period or schedule, like DHCP lease time, DNS scavening etc.
I have intentionally not "listed" all the technical details in this first post. However, if you need specific details I will be happy to share them.
Any hint or comment is appreciated
regards

This is by design.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/afd3c338-1706-4898-b269-550c018073c0/dns-entry-for-dc-not-dynamically-updating-server-2008-r2?forum=winserverDS
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ed97a286-d884-43d6-87e2-5cd5e59cfe9a/windows-2008-r2-domain-controllers-and-static-dns-entries?forum=winserverNIS
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

External hard-drive disappeared after dragging into Spotlight

Dear users,
My external hard-drive under devices disappeared after I dragged it into Spotlight to reindex it to make it searchable.
There was a cloud puff animation when i dragged it from the devices icon on the left of folders to the spotlight privacy box window.
Please help. Thank you!

Hi there,
did you find out what the problem was or how to re-map the ext. HDD?
I have the same problem.
thank you.

Release Tab in purchase order disappear after release using ME29n

Hi there,
We are busy testing support stacks (upgrading from ECC6 SAP_APPL SAPKH60305 to SAPKH60307)and we've come accross a strange problem. When we create a normal purchase order (ME21n) the purchase order does pick up a release strategy. Using the older ME28 transaction to release this purchase order, everything is fine. We can use ME28 to release the purchase order, as well as unreleasing the purchase order, as often as we want (the same purchase order). When we use transaction ME29n the release tab in the purchase order just simply disappears after saving. In the purchase order header changes, the release change is visible, but the release tab is missing. This purchase order is now not subject for release, and a goods receipt is possible without release. I checked in table EKKO as well and the release fields in this table for this purchase order is empty.
Has anybody had a similar experience? Any advise would be greatly appreciated.
Regards
Christo Vermeulen

Hi Christo Vermeulen,
I have detected the same problem as reported by you. Did you solve it? Do you know how can I procedure to solve it?
Thanks in advanced,
Eder Nicoleti

Why ilife disappear after reinstalling mountain lion?

why ilife disappear after reinstalling mountain lion?

The 10.8.3 update should have left your iLife apps intact - did you do a clean install, erasing your drive? If so, then you should be able to go to the Mac App Store and download the iLife apps using the Apple ID with which you registered your computer.
Clinton

My ipod shuffle disappears after I click on the icon in Itunes. I reinstalled Itunes and my computer has been updated. What else can I do?

My ipod shuffle disappears after I click on the icon in Itunes. I reinstalled Itunes and my computer has been updated. What else can I do?

The shuffle icon in iTunes disappears, after you click on the icon in iTunes? If so, if you do not click on the shuffle icon in iTunes, does it remain there indefinitely? Are you looking at the shuffle icon in the iTunes sidebar?

I upgraded to 10.5.1 and all my music disappeared after syncing. How do I get it back?

i upgraded iTunes to 10.5.1 and all my music disappeared after syncing. How do I get it back?

I lost all my music, too - except for 3 pieces!? And I just upgraded, didn't choose sync'ing :-(((
Sure would like to get back my music, videos and playlists!
Most of it was my personal compositions/recordings, not bought at the iTunes store.
(This Mac has OSX 10.5.8)

Make an image appear and disappear after x time

If I have a button on my screen that I want to make a box appear when clicked, how would I go about doing that? It also needs to disappear after 10 seconds. I am not sure if this is an issue, but it needs to appear on the screen while everything else is happening underneath it. So the rest of the animation must continue on as this appears above it.
Thanks in advance.

yourbutton.addEventListener(MouseEvent.CLICK,btnF);
function btnF(e:MouseEvent){
vizF(yourbox,true);
setTimeout(vizF,10000,yourbox,false);
function vizF(dobj:DisplayObject,b:Boolean){
dobj.visible=b;

Blurb Book in Lightroom 5 on my Mac disappeared after 3 days of work. Where can I find a backed up copy via Time Machine or anywhere else?

Blurb Book in Lightroom 5 on my Mac disappeared after 3 days of work. Where can I find a backed up copy via Time Machine or anywhere else?

Welcome to the WD Community.
1) I assume I can just hook the unit up via USB to my Mac and use iPartiion to reformat the drives, assuming each of the 4T drives will be seen by iPartition as a separate drive. That much seems straighforward.
Yes, and in case you ipartition dont see the unit properly, you can use the disk utilities on your Mac and you will be able to reformat the unit to make it compatible with your system.
2) Is my next step to reinstall the WD software and how do I do that? I've downloaded the Drive Utilities and Securities install apps - I assume I just run these with the drive still connected and that's all I need to do?
Yes, just run the applications.
3) What about the firmware update for Mac - when should I run that??
Normally, firmware updates are released to fix any issues that you might encounter on the drive. the latest one was released on 9/24/2014 and it fixed an issue with the drive dropping off of the list after system wakes up from standby mode.
5) And what about the "My Book Live Duo Setup" app for Mac - is that for a completely different model? What's the difference between "My Book Live Duo" and "My Book Duo"? It's these little things that I find so confusing.
Those are different units. The MBL Duo is a NAS (Network attached system) and the My Book Duo is a DAS (Direct attached system)
6) Lastly, when I have all the software installed, is that when I follow the procedure described in the Knowledge Base article ID 5724, "How to install a My Book Live or My Book Live Duo on Windows (8, 7, Vista, or XP) or Mac OSX for the first time"? Or is that procedure only for "My Book Live Duo" but not for "My Book Duo"??
That procedure is for the network units, not for your drive.

Release strategy of contract disappeared after using of MEMASSCONTRACT

Hi All,
May be some one can help me?
I have next problem it tr. MEMASSCONTRACT(ECC6)
Release strategy of contract disappeared after using of tr. MEMASSCONTRACT. I know why it happened, but I don't know how to correct it. Some time ago IN ECC5 we added a field to a table EKKO and used this field as one of characteristics in the release strategy of contracts. In order to transfer value of this field to field CEKKO-USRC1 we used User Exit EXIT_SAPLEBND_002. This User Exit is suitable only for online transactions (ME31K, ME32K). How can I feel field CEKKO-USRC1 in transaction MEMASSCONTRACT?
Regards, Liza

Thank you. Probably I didn't explain my problem clearly. It's section of code from User Exit EXIT_SAPLEBND_002:
ATA: reference(20) TYPE c VALUE '(SAPMM06E)EKKO'.
DATA: it_ekko TYPE ekko.
FIELD-SYMBOLS: <ymm_icl> TYPE ANY.
e_cekko = i_cekko.
*THE "ICL Contract" FIELD IS ONLY RELEVENT IN THESE TRANSACTIONS
IF sy-tcode EQ 'ME31K' OR sy-tcode EQ 'ME32K'
OR sy-tcode EQ 'ME33K' .
ASSIGN (reference) TO <ymm_icl>.
it_ekko = <ymm_icl>.
e_cekko-usrc1 = it_ekko-ymm_icl.
ENDIF.
Program SAPMM06E can only be reffered while using online transactions. Mass transactions does not use these program and it is completely class based. So, may be someone know how can i do the same , but for tr. MASS in ECC6.

Object disappears after pressing enter key

I need to attach the transaction J1B3N to keep the connection objects.
Perform the steps as the help of SAP:
Object links to other SAP objects
You can make an object link to SAP objects that are not shown in the possible entries list. To do this, proceed as follows:
In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140 .
The processing logic must follow that of screen 1204 in program SAPLVC130.
Create function module OBJECT_CHECK_XXXX (XXXX = object name)
If the object can be classified, this function module already exists .
Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
After performing these steps can see the screen with the number of document tab Link Object, but I am having the following problem: I inform the document number field and press Enter this number some of the screen.
Already remade several times but can not find the point I'm failing.
Thank you,

Hi Michely,
could you please check if the necessary object is correctly mainatined in structure MCDOKOB too. Here the following coding part could be useful to analyse why the value disappears after hitting enter:
Main Program     SAPLCVOB
Source code of   LCVOBU02
FUNCTION         KEY_ZU_OBJEKT
SELECT SINGLE * FROM TCLO
       WHERE OBTAB EQ OBJEKT.
IF SY-SUBRC NE 0.
RAISE NO_OBJEKT.
ENDIF.
NAME = 'MCDOKOB'.
IF NAME CP '*# '. ENDIF.
WRITE '-' TO NAME+SY-FDPOS.
IF NAME CP '*# '. ENDIF.
IF NOT TCLO-KEYF0 IS INITIAL.
WRITE TCLO-KEYF0 TO NAME+SY-FDPOS.
ASSIGN TABLE FIELD (NAME) TO <KEYF1>.
DESCRIBE FIELD <KEYF1> LENGTH LEN1 IN CHARACTER MODE.
KEY1 = NAME.
ENDIF.
IF TCLO-KEYF0 EQ SPACE.
KEY1 = ' '.
LEN1 = 0.
ENDIF.
Here the keyfield is read from table TCLO and then the length is read from structure MCDOKOB for example. So it is necessary that the same data is maintained in table TCLO and structure MCDOKOB to grant the correct working for new individual objects.
Best regards,
Christoph

Contacts will disappear after bulk vCard import

Hi all,
After bulk importing multiple 700 vCard contacts to the Address Book application (Version 8.0 - 1371) on Mac OX Mavericks, they disappear after closing and reopening the application, just showing the original 7 iCloud contacts I previously created.
Facts:
I am trying to import (by drag & drop) 700 vCards 2.1 - windows latin 1 (already selected this format in the Address Book Settings), created with Outlook 2002.
Address Book is connected to iCloud
Already tried, unsuccessfully:
Merging previously all vCard into a single one.
Doing the import after disconnecting iCloud, merging the contacts, reactivating iCloud.
Doing the import after disconnecting WiFi and LAN, merging the contacts (even without reactivating them afterwards).
Creating a new contact after the import before closing the application.
The previous 3 combined.
Importing the merged vCard directly on iCloud (getting Error though the file doesn't exceed the limitations)
In any case is that after closing the application the imported contact not be there any more: only the 7 iCloud contacts (or the "on this mac" if iCloud deactivated) will remain in the Agenda. I do not think it has to do with iCloud.
I the only clue I have, is that importing the vCards one by one, or in small groups (>10), they "may" remain recorded in the Address Book.
Does anyone have an idea or workaround to make this bulk import of vCard contacts?
Thanks,

So I had to do it manually... in blocks of 5-15 to see the conflicting vCards, that would not be recorded (and hence not automatically synchronized with iCloud).
Out of the 712 contacts, 8 were not recognized by the Adressbook.
No idea why, because the other 704 vCards were in the same format (v2.1) and codification (Windows latin 1), and where having also special characters in the .vcf filename or in the data inside.
I think there is a codification/import issue that Apple should check.

Badge icon disappears after 2.0 Update

After installing the Podcasts 2.0 update I noticed that the badge icon for the number of unread podcasts had disappeared. I am an experienced iPhone user and went through the normal trouble shooting steps of syncing, uninstalling an reinstalling, but the bange icon always disappears after applicaton of the Podcasts 2.0 update.
Has anybody elso noticed this behavior?

yeah an option would be good.
i'm still not sure myself whether this is intentional or a bug. especially as if you go in to the app and mark a podcast episode as played then go back to the full episode list again and then go back and mark the same one again as unplayed, then exit the app, it then shows that change on the badge app icon count, which as it's not a recent download but just recently marked as unplayed does seem a little buggy to me.

Pictures in iWeb albums disappeared after change location of original files

I created many albums in iWeb by dragging albums from iPhoto. But then I noticed some pictures from my iWeb albums disappeared after the original pictures got removed to another location (or deleted). How can I tell iWeb to make a copy of the pictures in iWeb itself so my iWeb albums can stay the same even when i need to reorganize the original files on the hard drive?
Any suggestions on how to restoring my albums in iWeb? I am having a bit headache now. Thank you very much!

That is not normal behavior. The photos should stay in iWeb even if you delete them from iPhoto. Are you running a "referenced" library or a "managed" one?
Click to view full size
Managed is the default option. If you're running a reference library that may be the reason. If so contact Apple via http://www.apple.com/feedback/iweb.html and http://www.apple.com/feedback/iphoto.html.
Unless you have a backup of your domain file predating the loss of the photos I don't know how you will recover the photos.
OT

Appsets disappear after UJS_ACTIVATE_CONTENT in NW7.5

Similar Messages

Maybe you are looking for