AppStore past purchases not Showing up after updating to IOS6

After I go into my iphone 4s and I go to Appstore and check my purchased items non of my purchases show up.
When i click in appstoreI> updates> purchased it either starts loading or crash.
I can see my purchased items in my ipod 4G and my syster Iphone 4S

I'm not sure if there exactly the same or not. I'll illustrate with an example.
Let say I have device 1 and device 2, both with iCPL turned on. I take 5 pictures with device 2, and they show up on device 1 under "All Photos". If I later turn off iCPL on device 1, I don't know if those 5 photos will will be shown in "Camera Roll" on device 1 or not. To be clear, I'm not saying they won't, I'm saying I haven't tested it and I don't know what happens.

Similar Messages

HT4623 itune is not showing iphone after updateing to IOS6

itune is not showing iphone after updateing to IOS6

Have you tried the Basic Troubleshooting Steps...
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Camera Roll not showing up after updating to 8.1

I know the 8.1 update was supposed to bring the Camera Roll back to the photos app, but it is not showing up for me after updating. I am looking in Albums section of the Photos app. All I see are All Photos, Videos, Slo-mo, Recently Deleted, and my personal albums. Anyone else having this issue or knows how to fix it?

I'm not sure if there exactly the same or not. I'll illustrate with an example.
Let say I have device 1 and device 2, both with iCPL turned on. I take 5 pictures with device 2, and they show up on device 1 under "All Photos". If I later turn off iCPL on device 1, I don't know if those 5 photos will will be shown in "Camera Roll" on device 1 or not. To be clear, I'm not saying they won't, I'm saying I haven't tested it and I don't know what happens.

Calendar not showing up after update?

I just did a software update and now my events aren't showing up on my mainscreen. I have it set on the "Today" theme so that my events show up on my mainscreen. After my update, they aren't showing up. I have a Pearl 8130. Any ideas?

Not sure if this is related but...(and I am on a MAC)
I just updated my BB9000 (running 4.6.0.167) to the new Desktop Manager Software v. 1.0.3 and when I completed my sync all of the data that HAD been in iCal has been wiped. Thankfully it is all still on the BB but I am stumped as to what has happened? I had been successfully using the two way sync mode by making sure I made NO updates to my desktop since for SOME reason RIM refuses to have an "overwrite (or replace) MAC data with BB data" option when syncing.
Is there something fundamental that I am missing here? Why won't the BB data show up on my iCal Calendar?
Thanks
Theo
Studio City, CA

IDevice not showing up after updating iTunes?

This issue has popped up for me (and my iPad Air device) a few times whenever a new version of iTunes is released & I've gone and updated to it. Just another little bug for Apple to fix at some point, I guess.
If it happens to you, Follow these simple steps below:
1. Close iTunes fully
2. Download the latest version of iTunes from here: http://www.apple.com/uk/itunes/download/
3. Open the iTunes Setup downloaded.
4. Click REPAIR, and next.
5. Once it is finished, restart your computer.
6. Open your iTunes, and plug in your device.
Done. Your iDevice should now show up as normal.

And if that doesn't work try Andrei Cerbu's post here or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
tt2

Safari does not show favicons after update to 6.0.3

Hello,
today I updated my safari browser and after that all my favicons are delated (only the blue sphere is there) and after a whole reset of safari and restart of the system the icons are still missing . Help me please!!!
current version of Safari: 6.0.3

Hello:
You almost assuredly reset Safari.
The favicons do not disappear as a result of installing the OS X 10.8.3 update (which includes that latest Safari.
When you click on the web site the first time, the favicons will reappear.
Barry

Analyser not showing results after update

Can someone please view the below and help me to determine why the results are no longer being downloaded. Or point me in the right direction of support or a support online chat.
We just did an upgrade of the Adobe Captivate Quiz Results Analyzer 1.5, before the update i could successfully download to disk all of the quiz results and access all of the .xml files. After the upgrade I cannot download the results to disk or generate report. I have deleted the internal server locations and tried readding these and haven't had any success. I get a message when trying to download report which says "Data is not present on local file system. Downloading Course Data...." and then "Download could not be completed" When i try to save to disk I get an error message which says "Downloading Course Data...." and then "Download could not be completed"
The client is also having the same issue accessing the results on their end.
Any ideas or help will be greatly appreciated

Hi there,
Welcome to Adobe Community,
Please remove Quiz results analyzer from the systems where it is giving problems. Then reinstall it and reconfigure the internal server. If that also doesn't work then try to install Quiz results analyzer on a new account and check under that. Also try to do Acrobat.com reporting just to test and see if that's working or not.
Thanks!

Boot fails due to /dev/sdb not showing up after update

For some reason, my secondary hard disk has stopped being detected after I updated my Arch Linux machine today. This machine has not been updated for about a year (I have been away). Basically, /dev/sdb* is not in /dev/. There is only /dev/sda*.
The current kernel installed is 2.6.39.
The error I get on boot is when it tries to detect the hard drives. I would try to provide a log file, however every time I try to plug in a USB stick, it says that it is disabling IRQ #10, and it won't start the network so I can't ssh the information to any other computer. I can log in by removing sdb from the fstab, so I will try to get /var/log/messages on here later.
I am using udev to detect my hard drives on startup.
Anybody know how to fix this problem?
I can log in perfectly fine if I remove any mention of sdb from my /etc/fstab.
Thank-you in advance for your help,
kev717.
Last edited by kev717 (2011-07-17 01:49:12)

Assuming you have a BIOS based computer, have you tried the BIOS configuration program to see if the drive is detected by the BIOS ?

[SOLVED] Volume groups not showing up after update

nunikasi wrote:
Hello!
I run a arch linux setup with LVM volumes on a LUKS encrypted drive /dev/sda. The header resides in the initramfs-linux-ck.img (So kernel and header are on a USB stick and my hard drive is completely encrypted).
Everything worked nicely with this setup until today. I ran a
pacman -Syu
and the kernel was updated as normal and made a new initramfs-linux-ck.img on the usb stick (mounted in /boot). This is the way I always updated the kernel, and it always worked, but for some reason, after the reboot, and after typing my passphrase I got an error
ERROR: device '/dev/mapper/nunikasi-root' not found. Skipping fsck.
This was strange, so I booted the latest arch live-cd and did a
cryptsetup luksOpen /dev/sda nunikasi --header (pathToHeaderFile)
and entered the passphrase and still there are no volume groups in /dev/mapper. Am I wrong in thinking that this command should load my volume groups as
/dev/mapper/nunikasi-root
and
/dev/mapper/nunikasi-home
Running
vgscan
also reports no volume groups.
Additional information:
Last time I updated the kernel was around 24th of June.
I did run pacman -r linux before the update, assuming there is no need for it since I run linux-ck. I hope this is not relevant.
Do you know what went wrong?
What was the problem?
As I saw that dm-crypt had a problem with finding my logical volumes, I fired up
cryptsetup luksOpen /dev/sda nunikasi --header (pathToHeaderFile)
dhex /dev/mapper/nunikasi
and found that the lvm metadata was cut in half. So I ran
dhex /dev/mapper/nunikasi /dev/sda
and quickly saw that there was an attempt to make a MBR on /dev/sda (I saw the boot signature 55 aa on offset 1FE-1FF). I remembered that I tried to use GParted some days earlier to format a memory stick, and I probably forgot to change from /dev/sda before creating a MBR. This is most probably what happened, and now I had to restore the metadata in some way.
What was the solution?
As I had never made a backup of the metadata, I knew that LVM makes one for you and puts it in /etc/lvm/backup/. So I fired up dhex on /dev/mapper/nunikasi and searched for it. Found the offset and did:
dd if=/dev/mapper/nunikasi count=2148 skip=8928722944 of=lvm-metadata.txt iflag=skip_bytes,count_bytes
Now I had the metadata backup and the right UUID for my physical volume. Only steps left were:
pvcreate -ff -u [UUID] —restorefile lvm-metadata.txt /dev/mapper/nunikasi
vgcfgrestore -f lvm-metadata.txt nunikasi
vgchange -ay
And my setup is working again!
Have a nice day,
nunikasi
Last edited by nunikasi (2014-07-07 20:30:16)

nunikasi wrote:
clfarron4 wrote:Hmm... Have you tried breaking out an Arch installation disk and having a look with that?
Yes, I wrote that in the original post.
Sorry about that. I've just read it again.
OK, based on the information you've given us (LVM on LUKS, VG=nunikasi and LVs=root,home, backed up header), I would have thought that the commands you issued in your original post would have unlocked it. I'm not going to make any assumptions about the header of the actual LUKS partition though.
nunikasi wrote:I remember core/filesystems and some other core packages were updated.
I've had a look through my pacman.log and I can't think of anything that might upset it (that said, I am quite tired). I run 5 (maybe 6) different kernels (3.10, 3.12, 3.14 and 3.15 branches) and I haven't had any problems with finding PVs, VGs and LVs on either of my systems.
I'm at a loss as to what could be up right now and I'll this thread for tomorrow (because sleep beckons).
EDIT: Wow. That's quite something.
Last edited by clfarron4 (2014-07-08 11:21:46)

HT1918 Purchases not going through after updating credit card details.

I recently updated my credit card details, when I try to make a purchase now I am directed to iTunes support.

We are just users here and can not help you. Do as directed and contact iTunes Support.

Bonjour printer not showing up after update

I have a Canon MX860 printer that - until this morning - was hooked up to my Mac via an Airport Express and Bonjour.
Yesterday I used Software Update to apply a Canon printer driver update. Since then, I have not been able to use my MX860.
I tried deleting the printer and adding it back, but it does not appear in the "Default" pane of the Print & Fax preferences "Add printer" dialog box. In fact, no printers appear there at all.
The Airport network the printer is on is working fine.
Any ideas?

Could this have anything to do with my problem? I have no printers in the list either and I'm unable to add them:
https://discussions.apple.com/message/15868039#15868039

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

It is hard to exactly understand what you have done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
Updating a Chart Copied from a Numbers Document
If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
Select the chart on the page and click the Refresh button that appears.
Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
I hope it has helped you.

Lacie Rugged external drive will not show up after Yosemite update.

Lacie Rugged external drive will not show up after Yosemite update. It show up in disc utility I can't access it.

I have the exact same issue. Have you had any luck with a solution?

HT1338 I am still with 10.5.8 and my macbook does not show any software updates, i am willing to pay for a new software if it is needed, because i can't connect mi iPhone 5S or iPad mini to iTunes. PLEASE HELP!!!!!

How do i update 10.5.8 if my macbook does not show any software updates?

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Syching my iphone4 after updating to ios6 and now half my photos aren't showing up in my phone.

syching my iphone4 after updating to ios6 and now half my photos aren't showing up in my phone.

Did you restore from backup on iTunes or did you use iCloud?
Did you sync with iTunes? Is iTunes section for photos checked to sync all your photo locations?
Also, with photo streaming sometimes you need to switch from Album to photo stream to see some photos.
If your photos are on your computer still, they can be added back. if not and you depended solely on iCloud, then they may be gone.

AppStore past purchases not Showing up after updating to IOS6

Similar Messages

Maybe you are looking for