AppStore Stopped working when trying to reinstall mac osx

I was trying to factory renew my computer because i didn't bother to delete all my files one by one, but after i erased my old files my app store stopped working D:.
It said that this item is temporarily unavailable. Try again later.

I'm not completely clear how you are doing this, so my suggestion may be what you are doing.
Do a backup. Try booting from the Recovery Volume (command - R on a restart), run Disk Utility repair disc and repair permissions, then reinstall the OS.

Similar Messages

5235 stopped working when tried to reinstall devic...

Please Help.
I was trying to reinstall the device software through ovi suite and when it was installing it said
"15 minutes total" but ovi suite closed after few minutes and there was only white light on my
phone.It stopped working. I disconnected and checked but its of no use.It does not display anything when i switch it on and I cannot switch it off.
Please Help.
What do I do to fix it?
Thanks.

first try remove the battery for ten minutes ,if nothing happens check to pool of knowledge section and look at how to recover from a failed firmware update .
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Lost data when trying to reinstall Mac OSX 10.5 (Leopard)

Hi,
Today, during the reinstall of my OS I got a message (in the 'about a minute to finish' part) that the installation couldn't be completed and that my old files (which I chose to keep intact - option 'Archive and Install') were in a folder called "Previous System". Well, turns out that OS kept only a few files (like 1 music from over 2000) and all my photos are gone, as well as all my documents!
Now i'm looking for some recovery data apps, but I would appreciate some help in my next steps.
Thank you for all help
Fábio

Hi FboO. There are a number of data recovery applications out there. [Data Rescue|http://www.prosofteng.com/products/data_rescue.php] is one of them.
After you've gotten all the data back that you can get (make sure you have at least two backups) you can then attempt to repair the file system using Disk Utility when booted to the install disk. If repair fails, erase the drive and try again. Further failures would indicate hardware issues requiring a repair.
Best of luck.

HT4864 My outgoing email as stopped working when using Outlook for mac 2011. Any suggestions?

My outgoing email as stopped working when using Outlook for mac 2011. I have deleted and reinstalled the account twice. I have 11 gig free on my iCloud account. The outgoing server is set at smtp.mail.me.com using port 587. If I was able to reinstall the account, I am positive I have the correct password. I can log into my iCloud accout using the same credentials.
Any suggestions?

I called Microsoft to fix my problem...for those maybe having the same issue, I was told by the Tech to use this outgoing server setting - p06-smtp.mail.me.com
All is working fine since doing so.

Iphoto stopped working when trying to export to facebook. iphoto is froze open with flip down for exporting. Neither will respond. Any ideas on how to fix this?

iphoto stopped working when trying to export pictures to facebook - iphoto page and export flip down froze open - cannot do anything with them - any idea what's wrong or what I can do to fix this?

Force Quit iPhoto (Use Force Quit under the Apple Symbol in the upper left of this page). If you continue to have problems please re-post in the iPhoto's forum, it's located at:
https://discussions.apple.com/community/ilife/iphoto

I am trying to reinstall Mac OSX, but my computer does not read installation cd

Hello, I am trying to reinstall Mac OSX, but my computer does not read installation cd. After restart, I hold C but either eject cd or doesn't read and computer boots up normally. I even ordered a new pack of installation cd, but still the same problem. Is there anybody can help me fixing this issue, because my Macbook pro has lots of software problem and when I spoke to tech, they said it needs to reformat and reinstall the OSX to solve all my problems. Please help me to reinstall my OSX!

Possible solutions:
You need to hold the c key down before booting
You need to use the built in keyboard, you have other hardware connected
You need the machine specific 10.6.4+ disks for that machine, the retail 10.6.3 disks won't work
There is a firmware password on the machine preventing the at boot key command functions
Try the option key for Startup Manager to boot from the disk, right after the "bong"
Your Superdrive lense is dirty or not operating, other hardware issues
You have malware of some sort

HT1430 For some unknown reason my Apple ID password does not work when trying to down load books from the IBook or Nook Apps. It also has stop work when trying to down load new Apps. Any suggestions out their???

For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps. Everything else seems to work. Any suggestions out their???

I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working. My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads. I have checked into my ITunes account and the ID and password are correct and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work. My problem seems to be just with trying to use my ID and password when wanting to download new books or apps. I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel. This message appears usually ten minutes after I have tried to make a purchase. At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen. Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.

Trying to reinstall Mac OSX

I'm trying to reinstall Mac OS X. I am installing it from the start up screen becasue it won't even go into the computer. The only problem is that after I installed it and restarted my computer nothing happened and it went back into the grey start up screen. It did not even offer me a chance to put in disk 2. What do I have to do to make this ibook work it is driving me crazy.

I fixed it after an extremely long time

Itunes has stopped working when trying to open store

I have gone through the uninstall/reinstall many times. Redid host file. Flush dns. Have tried many things. I noticed on one conversation on here. To go to the Action Center and click on itunes. It is saying a fault in the webkit.dll. I have no clue what that means or what I need to do to fix the problem.
I did notice that when I uninstalled the last time that when I reinstalled I no longer had Quicktime. So installed that, but still no luck
I have Norton 360 and Windows 7 64 on my laptop. We also have a desktop with the same, but the desktop is able to open the store. I am a tad confused on why mine is not. I can open itunes see the library then when I hit the itunes store it sits for awhile then it comes up with itunes has stopped working. Please if someone could help.

It shows in my downloads, starts downloading, and when it gets to the end of a song, I get the message "iTunes has stopped working" and choices to close or debug, etc.
Head into your Problem Reports and Solutions control panel (or the Windows 7 equivalent) and open your Problem History. Look for iTunes Problems reports that seemed to occur at the time that you had the Store troubles.
Open the reports and have a look through them. Do they all seem to say the same thing? If so, paste the contents of a typical report into a reply here. (Fingers crossed, that may give us a heads up on the cause of the errors.)

"Adobe Encore (encore 5.1 in cs 5.5) has stopped working" when trying to create blue ray

Newly installed machine with Windows 7 and Premiere Pros CS5.5. I've googled the error and have reset the preferences and updated the sonic driver. But when I start and create a blue ray project, as it's trying to create it, it gives the error "Adobe Encore has stopped working" and crash's. Any help is extremely appreciated. Thanks

>updated the sonic driver
As far as I know, that was for Version CS4
More information needed for someone to help http://forums.adobe.com/thread/416679
Some specific information that is needed...
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
Also be sure you have legal files
Premiere Import Formats http://help.adobe.com/en_US/premierepro/cs/using/WSd79b3ca3b623cac97fa024001235833a568-800 0.html
Premiere Export Formats http://help.adobe.com/en_US/mediaencoder/cs/using/WS725e431141e7ba651e63e3d1267818bc51-800 0.html
CS5 Encore Files & Formats http://help.adobe.com/en_US/encore/cs/using/WS5C9E1CF8-B5BC-436f-89D3-61DDC02A2C47a.html

HT1808 Itunes stops working when trying to restore and IPOD touch. (tried support for touch)

I have tried the directions on "If you can't update or restore your iOS device" page, but every time I try to restore the IPOD it crashes the program. Any suggestions on how to restore this to factory settings?
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues or iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
Thank you for the information, but the program still crashes about 1 min into the restore process. I have removed and reloaded the entire Itunes program thinking that it was corrupted, but that has not worked either. Any other suggestions?
What is listed in the status bar in iTunes when it crashes (what iTunes doing when it crashes). Try another cable Try on another computer to help determine if you have an iPod or computer problem
Has a few errors.
iOS 6.1.5 Fixes an issue that causes FaeTime calls to fail for some users on iPod touch (4th generation). As soon as that window pops up another window pops up and states
iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Did you Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
I have reinstalled the software 3 times.

Did you
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Adobe Reader stops working when trying to print

When I try to print something from Adobe Reader 9, I get a message saying that Adobe has stopped working. I un-installed the program, downloaded and re-installed it, but still get the same message. I am using a Medion PC running Vista, with 4GB memory. Any help would be much appreciated.

I have the exact same problem, with complications. I have Adobe 8, which was I think a pirated copy put on my laptop when a local technician uninstalled and reinstalled Windows XP. It worked fine until recently. Suddenly it stopped printing for me -- same message that it can't find the printer. I tried uninstalling and reinstalling. I even uninstalled and reinstalled the printer, which works fine for any other kind of document. I also tried installing Adobe 9. It said it couldn't uninstall Adobe 8 and so couldn't install. I couldn't delete Adobe 8 myself, either -- Windows message said that a certain patch was missing that it would need to proceed. So now I have found the same workaround mentioned above -- open the document in Word and print from there.
This could be a new problem in printer settings for Adobe, or the issue could lie with my copy -- which is probably pirated and which has never updated. I can't even get more than a blank page when I click on "Beyond Adobe Reader."
I'd be glad to start over with a fresh copy or a fix from Adobe, even if I had to pay for it. I would need the ability to delete the bad version 8 and an aborted version 9 so that I could start fresh and install. (Version 9 install now says that now it can't proceed because it has already half installed a version 9 -- which is, however, invisible when I look for it to get rid of it.) Help!
I am stuck.

Windows explorer stopped working when trying to open a specific folder...and solution

I have had a problem with a specific folder or two on my computer, when I open the folder I get the error message that windows explorer has stopped working. It only happens with specific folders and everything else works fine.
I did a lot of reading to figure out a fix.
I finally tried right clicking the program explorer.exe located in C:Windows and chose "run as administrator" and this fixed the problem.
Note that the error message details list an application crash of windows.exe
I thought I would post this to help others. I don't know if this is the same problem some folks describe with a continual loop of the error message, problems opening the control panel or problems upon start up. But if you have a similar problem to the one I described try this very simple fix.
Cheers

I don't know what OS you are running, but under Windows 7 RC build 7100 the selection was ghosted to "run as administrator".
I was able to stop the problem from happening by right clicking the folder I was having problems with, selecting properties>customize tab and changing the "Optimize this folder for:" from Videos to General Items.
I know that this particular folder was optimized for general items from the beginning as I had just folders inside which were filled with videos. When I started to move videos into this parent folder to separate them later, this parent folder switched by itself
to being optimized for Videos. I'm not positive but I think that this was the time I started to have a problem with this folder until I did what I described above.
This is my very first post, so I hope I explained things well enough to be of help to someone.
Thanks
That's fixed my problem. Stopped responding every time I opened My Videos, changed the file properties to optimized for general and now the icons aren't thumbnail big but it doesn't crash now... Thank you, it was really starting to bug me.

ITunes stops working when trying to play purchased video

Hey Everyone,
For some reason whenever I try to play a video or TV program that I purchased from the iTunes store it causes iTunes to shut down and it won't play the video. It does bring up the player for a few seconds then just hangs and a few seconds later it pops up a message that iTunes has stopped working. HELP PLEASE. I'm on 7 64 bit.
thanks

many thanks.
Fault Module Name: QuickTime.qts
Fault Module Version: 7.66.71.0
Okay. let's first try uninstalling and reinstalling your QuickTime. We'll also take a few other explicit precautions, just in case. Best to print out a copy of these instructions, because at one stage of proceedings you won't be able to use a web browser.
Preliminaries
Download and save a copy of the QuickTimeInstaller.exe file from the Apple Website. (Don't run the install on line and don't start the install just yet. get the installer that doesn't mention iTunes.)
http://www.apple.com/quicktime/download/
*Uninstall phase*
Head into your Uninstall a program control panel and uninstall QuickTime.
Next, we'll remove any leftover program files and folders.
In Computer, open your C drive.
Open the "Program Files (x86)" folder.
Right-click on the "QuickTime" folder (if it still exists) and select "Delete".
Go back into your C drive (or whichever drive your operating system is installed on).
Open the "Windows" folder.
Open the "SysWOW64" folder.
Right-click on the "QuickTime" file (if it still exists) and select "Delete".
Right-click on the "QuickTimeVR" file (if it still exists) and select "Delete".
Empty your recycle bin.
*Reinstall phase*
Restart the PC. After the PC restarts do not open any applications. Disconnect from your network and/or the internet. Now switch off all your security software (firewall, antivirus, antispyware).
Now start the reinstall by doubleclicking the QuickTimeInstaller.exe file you downloaded earlier.
Reenable all security software prior to reconnecting to the internet and/or your network.
Does the QuickTime reinstall seem to go through smoothly? If so, try launching iTunes again and trying to play one of the affected videos. Do you still get the same iTunes error, or are the files playing properly now?

Elements 11 organizer has stopped working when trying to edit an album?

Has anyone run into this?
The only place I've had the problem is when trying to edit an album. After it stops working, elements 11 just shuts down.
Operating system is Windows 7 Ultimate.
Thanks...

Great.. you figured that out
Just a thought, if you want to continue using Roboform as well as PSE and the two conflict.. you can Add PSE to Roboform's blacklist. That should stop the interaction between the two.
Steps to do so-
If PSE is running, close it now.
In Roboform 7, go to Options / Applications Integration.
Select Add to the Black List (the list of applications RoboForm will not attach to).
Browse to the location of the PSE executable <Organizer in your case, possibly Editor too>
Thanks
Andaleeb

AppStore Stopped working when trying to reinstall mac osx

Similar Messages

Maybe you are looking for