Appt entry/edit question: want tips for ease of use

Hi all, I use iCal on my iMac and iPhone, and have run across these issues, and wondered if there is a trick or tip I am missing.
Adding an appointment on the desktop:
When the event edit screen pops up, I try tabbing through each field to enter the relevant data. This entire window seems to be difficult to navigate, in that I would expect to tab through every field. After "location", the tab jumps to either the minutes or the AM/PM field. I then have to back tab to where I need to be. Entering the times can be a trick. I try to enter a 12:30 pm appointment, and in the hour field I type a 1 and a 2, which works sometimes, but sometimes moves me from a 1:00 display to a 2:00. then my noon appt is misscheduled for 2:00, if I don't catch it. Am I missing something?
When I am done editing a calendar entry, I can't hit return to save, I have to click done. Again, am I missing something, or is this just how it works?
thanks for any tips you have!

i believe , the configuration should work fine...one thing you need to ensure is , both the devices need to have latest firmware ..

Similar Messages

My partner and i have seperate i tunes accounts,can these be merged into 1 account for ease of use ?

My Partner and i have seperate i tunes accounts,can these be merged into 1 account for ease of use ?

This is not possible.
From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

Thinking of purchasing an Apple Time Capsule to work with my new iMac. I only want it for general family use. Any comments?

Thinking of purchasing an Apple Time Capsule to work with my new iMac. I only want it for general family use. Any comments?

It should work just fine. You can see user reviews on Apple's web site, here is the URL:
http://store.apple.com/us/product/MD032LL/A/Time-Capsule-2TB?fnode=MTY1NDA0Mg

Question relating tips for 2 DFF segments within the same group

Hi All,
I have a requirement where in I need to display a tip message for two of the DFF flexfield Segments within the same group. Currently we are displaying a tip for one of the DFF flexfield segment by placing it at the end of the Segment List and creating a normal tip message just below it. The shortfall of the above approach is when I add new segments to the DFF, the tip for the former segment is out of place.
Also, I currently have a requirement to create another tip for another Segment which is part of the same DFF. Could anyone of you please suggest how both the tips for the 2 DFF segments of the same group can be shown on the same page?
Thanks,
Sowmya.K
Edited by: user770244 on Nov 5, 2009 12:54 AM

Hi experts,
I am trying to find some solution that way:
- Maintain field catalog (FBRC008): setting field Segment as "secondary organisational unit" and setting field parter segment as "Secondary partner unit"
- Setting up a the reconciliation display (FBRC003) with the flag "Use Primary and Secondary org units and partner units in hierarchy display"
But when I launch the reconciliation display, the following dump arises :
"ITAB_ILLEGAL_COMPONENT"
In the current ABAP program "CL_FBRC_PRESENTATION==========CP" the internal
table "<LT_TOTAL>" was to be
processed with "SORT".
At the same time, a component "SEGMENT " was dynamically specified as content
of the field "ME->MD_SECONDARY_ORGUNIT_FIELD".
Do you have any explanation for that dump?
Thanks!

Tool Tip for VO attribute using Groovy

Hi All,
I was wondering how to use groovy for Tool Tip of a view object attribute.
What I am basically looking for is return the String from a RowImpl class method and set it as a Tool Tip text.
my method:
public String applyToolTip(){
return "This is my Tool Tip";
Groovy used for Tool Tip Attribute
adf.object.applyToolTip()
also tried with,
adf.object.viewObject.applyToolTip()
None of them work. Also I tried writing the same method in VOImpl class. No luck.. Please help with explanation.
Thanks.

Hi,
Groovy is not used throughout ADF BC. It can be used in validation and to define default values to an attribute but not for UI hints. For tool tips you would use message bundles (assuming your question is towards internationalization). Tool tips are defined on the AttributeDef of a View Object attribute and thus not defined per VO instance.
Frank

Multiple Libraries for ease of use.

This topic may be a deadhorse (no offense to horses) but I was wondering if there is a way to have multiple libaries within iTunes?
Here is what I would like to do:
1. Be able to have all of my "purchased" music stored on on an ext HD. I currently have my entire library on an ext HD, but the reason I ask, is that in Backup there is no selection to backup purchased music from anywhere other than the home folder, which is on the primary HD.
2. Have a preference solution to "choose" where to store PURCHASED music, movies, music videos, audiobooks, & podcasts in different locations (independently) but still organized withing the library files in the iTunes folder that is located in the music folder.
I understand that this is mostly wishful thinking. I will submit this as feedback to Apple, but when using Feedback there is usually no response.

Thanks, I understand about using the option key when launching, but what would be most helpful is to be able to control the locations from within iTunes and not have to "switch" during startup..... I just sent the feedback to Apple, I hope that it is taken into consideration. It seems simple and something that would make iTunes more powerful. The backup feature within iTunes does not have a selection for other than burning to disk (which with my library would take many DVD-R's and even with Blueray it will take multiple disc's....)

Tip for Photo Stream use, Online Bill pay conformation.

When you pay bills online and get the conformation screen with a conformation number saying please print for your records. Take a screen snapshot instead and import into iPhoto. With Photo Stream turned on the snapshot will be on all your devices. If there is ever a problem with a payment your conformation is right there on iPad/iPhone. I think it's a great way to save records of certain payments.

So I will replace Safari with Firefox? I was reading somwhere on these posts the other day that I can set Firefox to be my default browser, but then I thought someone said that it caused other problems on their computer (locking up?) Again, maybe I am getting 2 different posts confused. Could this happen if I change from Safari to Firefox?
Don't replace Safari; just try Firefox for the bank site that doesn't work with Safari. You can leave Safari as the default browser, and use it for everything other than the bank site.

I want program for bom explosion

hi
i want program for bom explosion

Hi,
   Using the function module below.
FM. CS_BOM_EXPL_MAT_V2
The required fields for this function module are :
Material
Plant
Date
Application(CAPID)
Values for CAPID can be found in table TC04
For production BOM it is PP01 .
The return parameter STB of type STPOX will contain all the BOM sub components. Using field IDNRK field of the STB table retrieve the subcomponents you need.
Else there is alternate approach too.
Chek the code below.
report zppprm_1087_bom.
include zbom_data_declarartion.
include zbom_selection_screen.
include zform_used.
*initialization
initialization.
prm1 = 'SELECTION'.
prm2 = 'Materials'.
     START-OF-SELECTION
start-of-selection.
Get the data from data base tablees
perform get_data.
*Format the final data
perform final_data.
*Display the final data
perform display_final.
*& Include           ZBOM_DATA_DECLARARTION
T Y P E - P O O L S
tables: mara, "Material Master
        mast, "Material to BOM Linkage
        stpo. "BOM item
type-pools: slis .
types: begin of ty_mara,
        matnr type matnr,
        mtart type mtart,
       end of ty_mara.
types: begin of ty_mast,
        matnr type matnr,
        werks type werks_d,
        stlan type stlan,
        stlnr type stnum,
        stlal type stalt,
       end of ty_mast.
types: begin of ty_header,
       matnr type matnr,
       werks type werks_d,
       end of ty_header.
types: begin of ty_stpo,
        stlty type stlty,
        stlnr type stnum,
        stlkn type stlkn,
        stpoz type cim_count,
        idnrk type idnrk,
        meins type kmpme,
        menge type kmpmg,
        preis type cprei,
        peinh type peinh,
       end of ty_stpo.
types: begin of ty_bom,
          matnr type matnr,
          werks type werks_d,
          idnrk type idnrk,
          meins type kmpme,
          menge type kmpmg,
        end of ty_bom.
Internal tables used in the code
data: it_stpo type standard table of ty_stpo,
      it_mara1 type standard table of ty_mara,
      it_mara2 type standard table of ty_mara,
      it_mast type standard table of ty_mast,
      it_bom   type standard table of ty_bom,
      it_header type standard table of ty_header.
Work Areas used in the code
data: wa_mast type ty_mast,
      wa_stpo type ty_stpo,
      wa_mara type ty_mara,
      wa_bom   type ty_bom,
      wa_header type ty_header.
data: v_matnr type mara-matnr.
data: col_pos type i.
data: sortcat type slis_t_sortinfo_alv,
      sortcat_ln type slis_sortinfo_alv,
      fcat type slis_t_fieldcat_alv,
      s_fcat type slis_fieldcat_alv.
data: obj_hieralv type ref to cl_salv_hierseq_table.
data: it_binding type salv_t_hierseq_binding,
      wa_binding type salv_s_hierseq_binding.
*& Include           ZBOM_SELECTION_SCREEN
*-Declaration of selection screen forthe program-*
selection-screen begin of block blk1 with frame title prm1.
selection-screen begin of line.
selection-screen comment (10) prm2 for field so_matnr.
Selection Option.
select-options : so_matnr for v_matnr.
selection-screen end of line.
selection-screen end of block blk1.
*& Include           ZFORM_USED
*&      Form GET_DATA
      text
form get_data .
*LOADING FINISHED MATERIALS INTO AN INTERNAL TABLE
select matnr
         mtart
    into table it_mara1
    from mara
    where matnr in so_matnr
      and mtart = 'FERT'.
if sy-subrc = 0.
    sort it_mara1 by matnr.
endif.
*LOADING CORRESPONDING FROM Material to BOM LINK TABLE
if it_mara1 is not initial.
    select matnr
           werks
           stlan
           stlnr
           stlal
      into table it_mast
      from mast
      for all entries in it_mara1
      where matnr = it_mara1-matnr .
    if sy-subrc = 0.
      sort it_mast by stlnr.
     loop at it_mast into wa_mast.
       move-corresponding wa_mast to wa_header.
       append wa_header to it_header.
     endloop.
    endif.
endif.
*LOADING CORRESPONDING BOM COMPONENTS FRON BOM ITEM TABLE
if it_mast is not initial.
    select   stlty
             stlnr
             stlkn
             stpoz
             idnrk
             meins
             menge
             preis
             peinh
        from stpo
       into table it_stpo
       for all entries in it_mast
       where stlnr = it_mast-stlnr.
    if sy-subrc eq 0.
      sort it_stpo by stlnr.
    endif.
endif.
*LOAD SEMIFINISHED MATERIAL
select matnr
         mtart
         from mara
         into table it_mara2
         where mtart = 'HALB'.
if sy-subrc eq 0.
    sort it_mara2 by matnr.
endif.
endform.                    " GET_SELECT
*&      Form FINAL_data
      text
form final_data .
loop at it_stpo into wa_stpo.
    clear wa_mara.
    read table it_mara2 into wa_mara
                       with key matnr = wa_stpo-idnrk
                       binary search.
    if sy-subrc ne 0.
      continue.
    else.
      read table it_mast into wa_mast
                         with key stlnr = wa_stpo-stlnr
                         binary search.
      if sy-subrc eq 0.
        clear wa_bom.
        wa_bom-matnr = wa_mast-matnr.
        wa_bom-werks = wa_mast-werks.
        wa_bom-idnrk = wa_stpo-idnrk.
        wa_bom-meins = wa_stpo-meins.
        wa_bom-menge = wa_stpo-menge.
        collect wa_bom into it_bom.
        move-corresponding wa_mast to wa_header.
        append wa_header to it_header.
      endif.
    endif.
endloop.
          sort it_header by matnr werks.
          sort it_bom by matnr werks idnrk.
          delete adjacent duplicates from it_header comparing matnr werks.
endform.                    " FINAL_data
*&      Form display_summary
      text
form display_final.
wa_binding-master = 'MATNR'.
wa_binding-slave = 'MATNR'.
append wa_binding to it_binding.
*Process of binding the header and BOM info in hirarchial form
try.
      call method cl_salv_hierseq_table=>factory
        exporting
          t_binding_level1_level2 = it_binding
        importing
          r_hierseq               = obj_hieralv
        changing
          t_table_level1          = it_header
          t_table_level2          = it_bom.
    catch cx_salv_data_error .
    catch cx_salv_not_found .
endtry.
*to dispay the info
call method obj_hieralv->display.
endform.
Hope this will help you,
With best wishes,
Rama.

Any Tips for editing Live Event 2 camera shoot?

I need to quickly edit a 2 DV camera recording of a live multi-scene performance (duration of 90 minutes), with audio additionally recorded on a good quality remote mic.
I have used FCE for some time, but not for several months. I have managed to forget many of the lessons learnt through trial and error, as well as by reading Tom wolsky's FCE Editing Workshop! So shortcut tips would be very helpful.
I am also using FCE 3.5 for the first time after my upgrade.
1
I want to make a safety copy of the synced rushes, as well as keeping the original camera sound recording as a back-up guide track.
2
I am worried about making sure I am working with Master clips, so that when I edit I don't mess up any of the source material. I am a little confused.
3
I would appreciate anyone with any suggestions or tips for the best edit process, and any warnings or other guidance. Speed is of essence. (ie there is no budget).
4
I am considering making separate sequences for each scene (14 scenes in all of varying length and complexity). Is this advisable rather than creating one programme length sequence?
5
I am considering making the audio into one mono track for simplicity, as the auditorium acoustics have "mixed up" the sound, with little stereo separation. Should I then duplicate the track to build the sound quality at the end?
Any other general Tips always welcome.
Thank you in advance. I appreciate all the unsung contributors to this group.
Freesh

I am a pretty good source for basic sound info - you can email me if you like
[email protected]
you are right about the link - I am sorry - i checked the website before I typed the link in too! A blond moment
A low shelf filter - as included in FCE and soundtrack cuts the bottom off a soundmix. 20hz is a low frequency - not many speaker systems can reproduce this frequency, and most speaker systems can't even get to 40hz - even you high fi system or speakers which say they may be able too present sound for 20hz to 20khz - well unless you have spent an aweful lot of money and have a sub bass speaker the size of a car probably may only go down to 40hz, and the production of any 20hz sounds is more likely a feeling - a psychoacousticc effect. The thing about cutting off the bass is that practically it can make the recording sound less muddy, and you can make the recording sound louder. Most recordings for CD play have the bass started to roll of pretty heavily at 40hz and nothing present at 20hz... theirs this thing called narquist theory which talks about frequency responce - but it is this math heavy thing - so basically cut out a good amount of the sub bass. A low shelf filter does this and If you want to be conservative cut below 20hz, and if you want to be real give it a good cut below 35hz.
Now I was sure that their was a mac version of that monofilter that I saw on the web page - I have a PC and do most of my audio work on a PC as that is what I have used the most. If you can get the mono filter work it will make the bottom end sound much better - more natural - less clicky and perhaps abnoxious.... those of us who like trip hop are always striving to get a nice warm bass that represents itself well on a range of speakers. something smooth - it is a bit of a trick - monofilter is one of those tricks.
If you put the bass in mono (below 250hz ish) and keep the phase right speakers find it easier to work with the signal. Also stereo bass is not something that translates well on speakers... Bass tends to just flood the room where as the more mid and trebbly sounds give the audio a feeling of distance and space and left and right. The monofilter has a bass compression/limiting and phase correction built itno it, and implimented on a slider called 'trim'. Listen to your recording on good speakers and probably just bring the trim down a touch (my guess)... as complex as it sounds the monofilter is very easy to use, and is super clever. Now I thought that nugen had a mac audio unit plugin - that is a pity if they don't and kind of makes my advice seem irelevant unless you are prepared to download an application that can use VST's.
Amy
be careful using an eq as most eq's disrupt the phase of the signal and can reek havok on live recordings. but do give it a low shelf filter at least below -20 but probably below -40 to -80 for practicalitys sake
This is a bit over my head, I am afraid. Do you know a source of basic info for sound recording to help explain such things? It could be a book or an online resource?
lol, what i meant was 20hz or 40 too 80hz - their is a low shelf filter in soundtrack that works well - I am talking about cutting off the low frequency bits of the recording here. Nugen audio has a little pdf that comes out with the monofilter talking about bass signals... I know it is geared towards music and perhaps music that you want to have a nice bass feel - however it translates to the real world too - You will be suprised at how great your audio will sound if you cut off a chunk of the sub bass, and put the low bass in mono.
then you could look at exciting the signal - but that is another story....

HT2486 I am new to apple - sorry for ease of question. With my HP I have a label tab for email. I can create any title. How do I do this in apple

Sorry for ease of question - I am new to apple/MAC. With my HP I can label my emails and keep all from a certain person. How do I do that with mac pro?

Create a new smart mailbox. Details in Mail's help files. Once you straighten that out, see these:
Switching from Windows to Mac OS X,
Mac Basics—Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mountain Lion Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

I have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

i have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

You just need a powered hub.. if you already use one then fine.
Plug in just about any external hard disk will work fine. Format has to be readable by the TC.. ie fat32.. or much better HFS+.. plug it into a Mac to prepare the drive.
Pick whatever size suits.. nowadays 2TB are most economical.
WD, Seagate have goobled up all the minor players.. so pick one.
Whatever suits your budget and asthetics.
NOTE.. The USB on the TC is fine for printers.. IMHO it is the wrong way to go with USB disks.. use the internal disk of the TC.. USB is less than half the native speed plugged into a Mac.. TC to USB is slow.. far slower than internal drive.. or using external drive as external.

I've had this iPad computer thing for a few months now. I used to just put in my password when I downloaded an app or such like. Now it wants me to set up 4 further questions and answers "for added security". How can I return to the old system?

I've had this iPad thing for a few months. It used to just ask me for my password, but now it is demanding I set up four questions and answers for
"added security". I don't want to do that, I just want to carry on as I was but the machine is preventing any app downloads etc.
Seems the stupid machine is in control.
How do I get it to listen when I threaten it with a good thrashing and a one way trip to the garbage unless it does what I say?
Thanks

Chick3597 wrote:
Regardless of apple updating something or another. I have no need for the additional questions and really don't want to allow them to bully me into compliance.
You may have no need for additional but Apple does. They don't want your iTunes account to be hacked and then go complaining to them that their security procedures are not up to standards.
Chick3597 wrote:
So how can I continue in the good old fashioned way?
Its really absurd to even ask this in light of the information that you have been given already. The "old fashioned" way is gone. It's Apple's store, Apples's rules and IMO - its a wise decision on Apple's part.
You do not have to comply at all, but you will not be able to purchase from iTunes anymore, but nobody is going to force you to do something that you do not want to do.

I've just bought an ipod touch. I cannot get beyond the question asking me for a network name. I don't have a mobile telephone which I think this question is referring to. All I want from an ipod is to listen to music. What should I do?

I've just bought an ipod touch but I cannot get beyond the question asking me for a network name. I don't have a mobile telephone which I think this question is referring to. All I want from an ipod is to listen to music. What should I do?

You have to activate a new iPod by either setting it up via wifi network that has an internet connection on to connect to a computer that has iTunes and an internet connection.
You can go to an Apple store or or to a friend's house if necessary

HT5312 I want to know the questions and protection for my account because my account is locked I can not buy please help

I want to know the questions and protection for my account because my account is locked I can not buy please help

The page that you posted from tells you how to reset them i.e. if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 half-way down that page should let you reset them.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

HT1918 plz i want help , how can i use credit card visa , im try to fill blank no. card information when i finish appear me msg ( the payment card you entered is not valid in israel p;ease provide avalid payment card for israel , im from palestine ) plz s

plz i want help , how can i use credit card visa , im try to fill blank no. card information when i finish appear me msg ( the payment card you entered is not valid in israel p;ease provide avalid payment card for israel , im from palestine ) plz solutio?

Oh thank god i am not the only one with this problem. It started with me on Saturday (aug 28) and still, no solution.
I live in the border with the USA so i’ve been using my itunes account with a USA debit card and then it started with that **** declined CC problem =S
The funny thing is that i’ve been trying to change countries, setting my account to Mexico and it would still say that the CC are declined. Tried 2 USA cards and 2 Mexican cards, no results =S
Wanna read something funny. I even tried to create a brand new account based in Mexico, with another email address and it still wouldn’t let me, tells me my cards are not valid……..the **** apple!!! i cannot update any app and i just got my iphone 4 on friday last week and i am dying to try new apps.
So far I’ve sent 2 emails and still no **** solution. At least i am not alone =’(

Appt entry/edit question: want tips for ease of use

Similar Messages

Maybe you are looking for