AppTRK wont install after firmware upgrade (N95)

Hello i have recelntly updated to the newest firmware and im having trouble whilst installing apptrk on the mobile i transfer it to the phone and when i start the installation i get to the part where you choose where to install the app but when i choose either the phone mem or the memory card i get an error saying that the component is built in and i need the trk app to be installed in order to install some other aplications that i also need very much
Thanks in advance...

You can't do anything.
The new firmware stops these sorts of programs working.
Mainly because they can be used to install illegal applications etc.
There is no way of downgrading your firmware either before you ask.

Similar Messages

Content Copier wont restore after firmware upgrade

I upgraded my N95 8GB to the latest firmware this morning (30.0.018), took 2 complete backups using Contect Copier V4 prior to doing so, but after the upgrade every attempt to restore contacts, settings, etc has failed.
I've tried doing the recommended re-formatting procedure, followed by a restore, which did not help. I've tried restoring individual items only, instead of the whole lot, which also didn't work.
According to the log at the end of the restore, the restore completed successfully. Reality suggests otherwise though.
Could anyone please help?
Thanks,
Adriaan

Right, I've tried using OVI, which did NOT resolve the problem. In fact, it gave identical results to the content copier included with the nseries suite.
I've written to Nokia support who have replied as follows:
"In this instance, allow me to suggest a few workarounds in order to rectify the issue on hand.
First, I suggest that you delete any data not needed from your Nokia N95 8GB to free up the internal memory of your phone before restoring the backed up file. I would like to also suggest that you select the content files that you want to restore to the Nokia N95 8GB. Once you have connected your Nokia N95 8GB to the PC and launched the "Content Copier" application, please select the content file types that you want restored on the phone.
However, if you are still unable to restore the backed up file to your Nokia N95 8GB, there may be inherent issues with your Nokia N95 8GB that may prevent you doing so. In this case, please take your phone to your nearest Nokia Care Point for an assessment. The Nokia Care Point will assess if a repair is required and advise if this may be covered under warranty."
So it looks as if I'm going to have to take it in for repair...

T1000 wont boot after firmware upgrade if SCA6000 is connected

Hi guys,
as u may have guessed from the topic, I had a T1000 server with a sun SCA6000 crypto card mounted in the PCI slot. All worked fine until i tryed to upgrade the firmware on the server to the last available release (6.7.8 with patch 139435-06 ) . After the upgrade procedure, the system did not boot anymore. This is the console output with POST after the poweron command:
sc> poweron -c
Enter #. to return to ALOM.
0:0:0>
0:0:0>Sun Fire[TM] T1000 POST 4.30.4.a 2010/01/06 15:23
       /export/delivery/delivery/4.30/4.30.4.a/post4.30.4-micro/Niagara/erie/integrated (root)
0:0:0>Copyright 2010 Sun Microsystems, Inc. All rights reserved
0:0:0>VBSC cmp0 arg is: 0fff0fff.00000211
0:0:0>POST enabling threads: 00000000.0fff0fff
0:0:0>VBSC cntl arg is: 0fff0fff.00000211
0:0:0>VBSC selecting POST MAX Testing.
0:0:0>VBSC setting verbosity level 2
0:0:0>Start Selftest.....
0:0:0>Master CPU Tests Basic....Done
0:0:0>Init MMU.....
0:0:0>L2 Tests....Done
0:0:0>Test Memory....Done
0:0:0>Setup POST Mailbox ....Done
0:0:0>Extended CPU Tests....Done
0:0:0>Scrub Memory....Done
0:0:0>Functional CPU Tests....Done
0:0:0>Extended Memory Tests....Done
0:0:0>IO-Bridge Tests....Done
2010-06-17 17:45:02.383 0:0:0>INFO:
2010-06-17 17:45:02.399 0:0:0>     POST Passed all devices.
2010-06-17 17:45:02.433 0:0:0>POST:     Return to VBSC.
2010-06-17 17:45:02.449 0:0:0>Master set ACK for vbsc runpost command and spin...
SC Alert: Host system has shut down.
SC Alert: Host System has Reset
JUN 17 17:45:22 ERROR: HV Abort: <Unknown?> (217f14) - PowerDown
SC Alert: Host system has shut down.
sc> Guessing an hardware compatibility problem, i tried to remove the SCA6000 board and the system booted again without an hassle.
Unluckily, I need the SCA6000, and I don't have any other server in which to mount it, so I tried to downgrade the firmware to the release I had before the upgrade:
firmware version: 6.6.7
patchid: 136928-05
but the system does not boot anymore with the SCA6000 connected. I even tried an older fw release just to be sure (fw 6.6.1, patch 136928-01), with the same result.
I did not find mention of any incompatibility in T1000 or SCA6000 documentation.
Any help would be REALLY appreciated
Many thanks in advance.

Hi,
This looks similar to the bug 6630313 :: http://sunsolve.sun.com/search/document.do?assetkey=1-1-6630313-1
As described in the bug document, it is due to lower f/w rev. on the SCA6000 and solution is to upgrade the crypto card f/w to 1.1.0 /1.1.0 (bootstrap/operational )or later.
Another workaround would be to install system f/w 6.2.4 or 6.2.8 which works well with crypto card f/w 1.0.4/1.0.7.
Copying relevant part of the document for ref.
=======================
Work Around: The card is recognized by obp and prtdiag with firmware 6.2.4, so at this point customer is using firmware 6.2.4 as workaround.
Customer's crypto card is currently running 1.0.4/1.0.7 bootstrap/operational firmware. Customer can upgrade the card to newer firmware such as 1.1.0/1.1.0 by moving card to a system that boots successfully such as Ontario T2000. After such upgrade, install the card back into T1000 which should boot successfully with sysfw 6.4.0, 6.5.5 or 6.5.11 posted on Sunsolve.
Another workaround is customer can downgrade the T1000 sysfw to 6.2.8 so they can boot with the crypto card. After the T1000 is up and running with sysfw 6.2.8, customer can upgrade the crypto card fw to the latest 1.0 patch on the T1000 itself, then upgrade the T1000 sysfw to the latest
version posted on Sunsolve. This workaround does require customer to have access to an Ontario T2000 system.
Another workaround is customer can downgrade the T1000 sysfw to 6.2.8 so they can boot with the crypto card. After the T1000 is up and running with sysfw 6.2.8, customer can upgrade the crypto card fw to the latest 1.0 patch on the T1000 itself, then upgrade the T1000 sysfw to the latest
version posted on Sunsolve. This workaround does not require customer to have access to an Ontario T2000 system.
========================
HTH
-Mehul

No power after firmware upgrade on nomad jukebox zen xtra

I have the nomad jukebox zen xtra 30gig that froze up over a year ago after i tried to install the firmware upgrade. After the unsuccessful attempt, the mp3 player stopped working.... I mean no power at all. I've changed the battery and recharged the battery from an outside source...still no luck. I can't even try any of the suggestions anyone gives on this site because I have no power.Does anyone have this problem? More important, does anyone have this problem and know of a solution?I've already set my pc back to wmp 0, I have the firmware on the desktop waiting. Now all I need is some power on this unit so that i can try some of the suggestions that seems to be working for people. Thank you

I have the same problem too, but my unit is a?Creative Normad Junebox Zen Xtra 40GB. I was trying to find a solution to my problem when I read about your problem. I have pressed the reset button, on / off switch, removed the battery, reinstalled the battery, and nothing seems to work. I was hoping you?might get a solution to this problem, so that I might be able to fix my MP3 player. If I hear of a solution, I will let you know, thanks for sharing. Issue:? While updating the firmware to the Zen Xtra 40 GB, the unit powered down and?has never came on again. There seems to be no real reason why the unit should not power up. The battery and the AC adapter are working correctly. I am very disappointed in Creative...

ZenV Plus STILL stuck in recovery mode after firmware upgrade

=Hi there,
My ZenV plus opened in recovery mode for no apparent reason... I have tried every option to try to fix it, including downloading and installing the firmware upgrade - this generated a message saying the upgrade was successful but the player will still only start in Recovery Mode after trying to reboot it. So what do I do next? Thanks in advance for any and all helpful suggestions.

AHi,
Can you please try resetting the ZEN V Plus to see if it helps?
To reset the player, use a pin to press the reset button.
Did this happen out of the blue?
Do you have any contents in the player? If you do, please remove them to see if the player is booting up properly.

PC-Suite sync fails after Firmware upgrade of E65

After firmware upgrade of E65 PC-Suite stops syncing Calendar & Contacts from outlook. No error messages, just "0 entries has been updated".
- PC-Suite updated to 7.0.9.2
- Outlook 2003
- XP Prof.
Any ideas?
Solved!
Go to Solution.

The funny thing is - the notes are synced???? If I restore some old contacts they'll double up in outlook, so I think the problem is, that the sync app doesn't see the outlook contact & calendar folder.
Does somebody has an idea?

Crippled 192.168.1.1 page after firmware upgrade

hi,
i recently upgraded the firmware of my WRT160N V2 to 2.0.03.
but since then when i login i get a crippled page on 192.168.1.1 with not even a menu. so i cant even downgrade. is there something i can do?

It is good to know that the issue is resolved
After firmware upgrade it is always recommended to reset and reconfigure the router and I think that is why you were unable to see the menu on the setup page of your router.

Wireless B router woes after firmware upgrade

I downloaded and installed the firmware upgrade for my wireless B ver.4 router and now it's not transmitting a wireless signal. Computers plugged into the wireless router get internet connection, but it doesn't seem that the the router is broadcasting wireless. I tried to go to my routers set-up by using the default router IP...but it won't connect...any thoughts?

Since you have upgraded the firmware on your Router, You need to Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

T410i SSD user and master password problem after firmware upgrade

Hello.
I have problem with my Corsair Force 3 120GB SSD. After firmware upgrade of SSD my master and user HDD passwords are no longer valid. I'm stuck on BIOS screen and cannot unlock my SSD. After firmware upgrade procedure i got BSOD. Same happened during firmware upgrade on my previous SSD (INTEL X25-M 80GB) but after restart everything was OK. Please help!
Previous firmware version: 1.3
Current firmware version: 1.3.3
SSD connected to another computer shows RAW partition data, but firmware version is 1.3.3 - seems like update was successful.

My X301 Intel x18 got bricked also after a BIOS update then secure erase (was going to sell it). I plugged it to a USB kit and onto a desktop and it was recognised and able to format. But plugging it back to the lenovo it is still a brick. My lucky star there was warranty it was replaced by lenovo.
You may want to try it and extract the data, if it works. And hopefully you can still format it and made it work pluggin back to the lenovo.

HP Laserjet p1102w - after firmware upgrade / Smart Install update - down to 1MB free memory

Hello,
I have a Laserjet p1102w running off a laptop with Windows 7 64-bit. Just bought the printer this month.
After updating the firmware to 20120814 version and updating the SmartInstall update utility for the 20120814 version as well, I am now down to 1 MB free memory (out of 8MB originally). [Another LJ p1102w updated prior to these updates has 3MB free memory.]
Because I have 1MB free memory, the printer is almost a brick. It can print simple text based pages - however, printing any page with a graphic or a PDF file will cause the printer to take forever to receive data - essentially preventing printing a page on my new printer (while printing the same page instantaneously on my older nonupdated p1102w).
Is there any way to fix this problem, given there is no memory upgrade option? Otherwise, this printer is a brick.
Thank you in advance for a reply - especially from HP.

Hi cyskim,
Did you tried turning the printer off and on after updating the firmware? This should clear its memory, including any memory may affected during the firmware upgrade proccess .
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Iphoto wont open after system upgrade and iLife install

I installed Leopard and reallized i had to also buy iLife because the old version of iphoto was not supported by the the new operating system. Installed iLife and everything works exept iphoto. It acts as though it is "loading library" and then a pop-up window shows up saying:
"The photo library needs to be upgraded to work with this version of iphoto. Your photo library will not be readable by previouse versions of iPhoto after the upgrade. The upgrade process may take several minutes depending on the number of photos in the library."
I have hit "upgrade". But it still does not open.
I have about 9000 photos saved on an external drive.
I have repaired permissions as well as trashed iphoto and re-installed.
I read similar posts and am tempted to create a new library with library photo manager but am affraid i will lose some of my pictures.
I should include that because I couldn't open after the os update, I went into the my photo folders through finder and added new pix that I needed to get off of my camera. I've sinced trashed those folders.
Any ideas?
THanks in advance.
x

Welcome to the Apple Discussions. Thanks for the heads up on the out of date screenshot of BatChmod. It's been updated now. If all you your efforts to get your library updated and running fail you might try rebuilding the library with iPhoto Library Manager. It creates a new library based on the data in the AlbumData.xml file and leaves your current library untouched. Here's how that would work:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 -Download iPhoto Library Manager and launch.
2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be untouched for further attempts at fixing or in case the rebuilt library is not satisfactory.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

IPod Touch is frozen after firmware upgrade

Hi, I have a 2nd gen iPod Touch, running firmware 2.2 with Windows XP.
Yesterday I upgraded the firmware to 3.1 from the iTunes store. After downloading the installing the firmware, I got the itunes error 1601 and now, the iPod is perpetually frozen with this screen:
http://km.support.apple.com/library/APPLE/APPLECAREALLGEOS/HT1808/HT180803.png
The iPod device is not detected in iTunes anymore. Also, the 'Found New Hardware Wizard keeps popping up and then it tries to search for the driver but cannot locate it, whenever it tries to search it comes back saying "The hardware was not installed because the wizard cannot locate the necessary software". I checked the Device Manager and it is not listed under one of the "Universal Serial Bus controllers" either.
I have tried the restarting Windows and using a different USB port, but to no avail. Attempts to restore the iPod also leads to iTunes error 1604.
Would appreciate any help! Thank you!

Welcome to the discussions,
make sure your security software is not blocking the USB connection to your ipod, see this article for more info: http://support.apple.com/kb/TS3125
Here's more info about reinstalling the USB drivers: http://support.apple.com/kb/TS1538

HP 5524 Wireless does not work after firmware upgrade

HI,
I have just purchased an HP5524. After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully.
However, ever since wireless will not work. Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum. The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
Thank you

Hi,
Thank you for posting you query,
In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen instructions.
If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Fans And Voume after FirmWare Upgrade

Hey there!
I have two very positive pieces of information, some repeated:
1) The volume of my speakers and "line out" was weak at best prior to the FirmWare upgrade. Now, it is positively explosive! I mean, the volume control works just like I would have expected. Perfect...
2) The fans are coming on more consitantly. I can actually hear them now, which makes me wonder... The temp on the Hard Drive has not gone above 92 since I upgrade the firmware (not that I have noticed however).
Bob

Hi Bob!
What did you use to check the temperature?
I installed the 10.4.6 and the firmware, and now I could cook an egg on the keyboard. I didn't have the heat problem before, now after the updates, I am fried (literally).
Gus

Iomega Storcenter ix4-300d stuck at 95% after firmware upgrade

Hi,
I upgraded my device after I got an email that there is a new firmware:
An update to version 3.2.10.30101 of the Iomega StorCenter ix4-200d software is now available
I installed the update but now it is stuck at 95% after rebooting.
Never had any problem before the firmware upgrade.
Any advice?

Hello BelgianTomas
I recommend that you first power down the unit if the unit has not completed the boot process. Then re-seat all disks and try booting the unit again. Please do not try to access the web interface until the power led is solid white.
Next would be to try moving the internal disks to different bays to see if a different drive order wil allow the unit to boot.
If that does not help, LenovoEMC suppor should be contacted for more advanced options.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

AppTRK wont install after firmware upgrade (N95)

Similar Messages

Maybe you are looking for