AppUser configuration for AXL Serviceability

Since there's no role for AXL Serviceability and the AXL role doesn't seem to cut it, I tried defining my own role based on the Serviceability Admin role and I assigned read and update for the following services:
SOAP Backup and Restore APIs
SOAP CDR on Demand APIs
SOAP Control Center APIs
SOAP Log Collection APIs
SOAP Performance Informations APIs
SOAP Realtime Informations and Control Center APIs
SOAP SNMP Config API
However, that doesn't seem to cut it - does anyone know what other properties are required to access the various axl serviceability services?

Hi Stephan
Do you have any update to this problem? I am trying to run an application without the superuser rights, but I was not successful. The error message is: Server returned HTTP response code: 403 for URL: https:///realtimeservice/services/RisPort
Regards
RenÃ©

Similar Messages

When trying to access one website, Firefox says " This domain is not configured for this service. Please add it to your account."

I am trying to access a fabric website I have used before and when I try to type in the domain name, a message appears saying "This domain is not configured for this service. Please add it to your account". How do I fix this?

That message sounds like an address might have changed on the server...
Are you trying to access the site directly using a bookmarks, or by typing into the address bar, or by following a link in a search engine? Sometimes links change making bookmarks and search engine entries obsolete, or Firefox's autofill feature suggests an address that no longer works, so if one approach doesn't work, you might try one of the others.

What accounts need to be configured for a service tax 10%,a balance sht a/c

This below error occurred while clearing the entries.
"Ex.rate diff.accts are incomplete for account 0003260423 currency INR"
I have gone through this and found that, we should need to configure gain/loss accounts in OB09.
I am not sure, what accounts need to be configured for a service tax account(3260423), Its a balance sheet account.
Can someone guide me on this.
Thanks
Sudhir Krishna Kumar Singh

Hello Sudhir,
regarding to your incident, could you please try the following:
   1.The problem is probably caused by the settings in transaction OBA1.
     The system checks OBA1, if there is an entry for process KDF and
     the relevant G/L account 135090. If there is none -> F5 063 is
     created. Also the exchange rate difference accounts have to be
     maintained in OB09
     If you make a dummy entry in OBA1 & OB09 this account will be
     selected when trying to make an exchange rate difference posting.
     Please also check the documentation to field "No forex rate diff.
     when clearing in LC" in transaction OBY6.
   2.Basically solution is to create the mentioned account for exchange
     rate difference, in order to avoid error F5063.
     But, if you don't want to post that difference, I ask you to check
     the solution proposed into OSS note 546997.
Hope this could help.
regards
Ray

Roles needed for AXL Serviceability access on CCM5+

So far, unless I add my application user to the superuser group, I'm unable to make any risport queries.
Has anybody figured out what role controls access to the AXL Serviceability interface?

Hi Stephan
Do you have any update to this problem? I am trying to run an application without the superuser rights, but I was not successful. The error message is: Server returned HTTP response code: 403 for URL: https:///realtimeservice/services/RisPort
Regards
RenÃ©

SSL and custom domain configuration for cloud service

Hi,
I am doing custom domain mapping and SSL configuration for a cloud service web role. Another important aspect is Cloud service web role uses ADFS in between for authentication.
I have custom domain mapped, SSL uploaded on cloud services Certificates
tab in management portal, certificate .pfx and chaining certs .CER are added as below -
<Certificate name="UATCert" thumbprint="A" thumbprintAlgorithm="sha1" />
<Certificate name="Certificate1" thumbprint="B" thumbprintAlgorithm="sha1" />
<Certificate name="Certificate2" thumbprint="C" thumbprintAlgorithm="sha1" />
I see these certificates getting added properly to Azure cloud service web role instance VM.
The problem is, when I access the custom domain,
https://mysite.com/default.aspx in the browser ultimately after ADFS login I see
https://cloudservice.cloudapp.net/default.aspx. My understanding is, cloudapp.net should not be seen in the browser to the client. Also I keep getting error of certificates stating "There is
a problem with this website’s security certificate" when browser shows cloudapp.net url.
How can I avoid display of cloudapp.net in browser and show only custom domain Url. Also how can I avoid this certificate error ?
Thoughts?
http://sanganakauthority.blogspot.com/

Hi kunal,
Based what you described, I understand that you want to use the custom domain for cloud service web role and apply azure active directory authentication to the web role application.
>>>The problem is, when I access the custom domain,
https://mysite.com/default.aspx in the browser ultimately after ADFS login I see
https://cloudservice.cloudapp.net/default.aspx.
As for above issue, I think you should make sure you have registered the web application in azure AD both "SIGN-ON URL" and "Reply URL" are
https://mysite.com/default.aspx
>>>Also I keep getting error of certificates stating "There is a problem with this website’s security certificate" when browser shows cloudapp.net url.
Try to upload a valid certificate (provided by CA) to cloud service for your custom domain.
Best Regards,
Fuxiang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Automated Runtime Configuration for External Services

Hello,
in relation to my bachelor thesis I was wondering if there is API or another way to set the backend systems destinations for external services dynamically and not by entering the information in CAF Runtime.
Thanks,
Petromil

Hello Bonnie,
Here is some documents which will help you to setup External Service Management.
http://help.sap.com/bp_bblibrary/500/documentation/U42_BB_ConfigGuide_EN_BR.doc
<a href="http://help.sap.com/bestpractices/BBLibrary/documentation/J24_BB_ConfigGuide_EN_UK.doc">SD/MM Services</a>
Regard,
Arif Mansuri

Type of configuration for web service in SOA manager

Hi Experts,
could you please let me know while creating logical port for Web sevice security which type of configuration should I select in SOA manager. There are three types of configuration. 1> WSDL Based Configuration2>Manual Configuration and 3>Process Integration Runtime.
As per the below link I am going to apply web service security but I dont have authorization to create logical port using t-code lpconfig. So I am trying to create it using SOA manager.
http://help.sap.com/saphelp_nwpi71/helpdata/EN/b8/cb1141e109ef6fe10000000a1550b0/content.htm
Regards,
Sari

Hi Krishna,
Thanks for your reply. But here I am not creating any consumer proxy. I want to create only logical port for CO_WSSEWSSPROCESSOR_VI_DOCUMEN as mentioned in above link. I dont have any wsdl link for the same.Here I want to create logical port where I can mention the RFC for the integration server as per defined by below link.
http://help.sap.com/saphelp_nwpi71/helpdata/EN/b8/cb1141e109ef6fe10000000a1550b0/frameset.htm
When I am creating logical port by manual , its not allowing me mention any HTTP destination. By default its showing me as 'unknown' HTTP destination.
Please let me know if I have missed out any configuration. As per above link Java part configurationI have done successfully. But for ABAP part I am confussed while creating logical port.
Regards,
Sari

Best practice MPLS design/configuration for small service provider

We are a small regional service provider and did not have MPLS supported on our network. To start supporting MPLS, I’d like to get opinions and recommendations on the best practice configuration.
Here is what we have today –
We have our own BGP AS and multiple /24s.
We are running OSPF on the Cores and BGP on the Edge routers peering with ISPs.
We peer with multiple tier-1 ISPs for internet traffic. We do not provide public transit.
What we want for phase one MPLS implementation –
Configure basic MPLS /vpn functionality.
No QoS optimization required for phase 1.
We have Cisco ME 3600X for PE. Any recommendations will be appreciated.

Not sure what kind of devices or routers you have in your network but looks for if you have support for labeled multicast for MVPN support. That will avoid other complexity of using other control protocols (like PIM) in core.
PE redundancy can be obtained by BGP attributes, CE-PE connectivity can be tunned using IGP or VRRP/HSRP...
You can have mutiple RSVP TEs for various contract traffic and you can bind various kind of traffic to different RSVP Tunnels based on contract or service with your customer.
RSVP-TE with link/node protection design will be of great help to achieve quicker failover.

The LDAP configuration for Oracle Service Registry 11g(OSR 11.1.1.2.0)

Hi All,
Please teach about user management in Oracle Service Registry(OSR).
We want to manage all users in LDAP(OID).
Questions
Q1) How can we manage the user in OID?
Q2) OSR default user(admin) will not be displayed on the security realm in WebLogic.
Can we configure security realm in WebLogic?
Regards & Thanks
yoshida.

Refer to this doc http://download.oracle.com/otndocs/tech/soa/OSR103ProductDocumention.pdf
Section 6. External Accounts Integration

Configuration details for releasing service entry sheet

Dear all
Kindly let me know the step by step procedure in configuration for releasing service entry sheet,
regards
M.Chandra mohan

Identify the characteristics that you will use for determination of release strategy. Create characteristics for each of these - ensure that the reference table name is CESSR and reference field name is the appropriate field name. If the field name is not found in CESSR you will need to use an user exit - better not to get into that for now.
Create a class (of class type 032) and assign these characteristics to the class.
Then create one Release Group and link the class to the release group.
Create Release Codes for the release group
Create release indicator
Create release strategies.
You will configure this in the golden master client. However you will need to maintain the classification in all clients using CL20N or CL24N.
Lakshman

How to Publish a Webservice for a service definition in PI 7.1

HI ALL
I am trying to get the WSDL URL to provide to Enterprise portal.
Can you please help me with steps on how this can be done using PI 7.1 Service registry.
Currently I am assuming we can use the PI 7.1 Service registry to publish web Service.
If my assumption is true, how do I get the WSDL URL from PI 7.1.So, that I can provide this WSDL URL to enterprise portal and using they can get to PI using this WSDL URL for specific service interface created on PI 7.1.
Your help is greatly appreciated!!
Thank you,
Ritu

Hello
Please make sure in your PI Netweaver Administration Destination Template has [UDDI_DESTINATION and CLASSIFICATION_DESTINATION|http://help.sap.com/saphelp_nwce711/helpdata/en/eb/20b86b96b1494faec272c34f100635/content.htm] created and has configuration for [central service registry|http://help.sap.com/saphelp_nwce711/helpdata/en/47/d391d7b8fc3c83e10000000a42189c/content.htm] done.
Also make sure in your service registry (http://<host>:<port>/sr) that these services do not exist before you try to publish it.
HTH
Jinal Shah

How to configure solution manager service desk knowledge base for customer?

Hi Expert,
How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Please advice,
Thanks
regards,
ng chong chuan

>
Chong Chuan Ng wrote:
> How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
>
> Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Hi,
It's a good idea, but currently it's not yet supported.
In Work Center, there is no predefined (nor a hidden) link shipped by SAP to access the Solution Database for key users.
With a future EhP for Solution Manager, you might get an integration of the Solution Database into the message processing Web UI.
Best regards,
Ruediger

How To Configure TREX Name Server&Port for UDDI Service Registry Settings

Hello Experts,
we are using CE 7.1 SP 4 and I would like to use the trex service in the Service Registry.
I use \NWA\Service Registry Configuration\Service Registry Settings\Keyword Search and want to test the TREX Communication using the Test Connection Button.
If I do so, I receive "Connection to TREX not successful".
When I press the Update TREX button I receive this exception:
com.sapportals.trex.TrexException: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
I tried to configure the trex.service with the two parameters: nameserver.address and nameserver.backupserverlist -> tcpip://myhostname.mydomain:30001 (Instance 00).
I am not sure if the port number is correct -> is there a way to lookup the correct port number?
Is there something else I should configure?
Thanks for help, best regards
Thomas

Hi Ganesh,
In order to access the Visual Administrator, go to Start > Programs > SAP J2EE Engine > Visual Administrator. After you login, you will see 2 nodes i.e. Dispatcher and Server. Expand the Server node. Then go to "Services" and expand it. Then go all the way down to "TREX Service". Then on the right hand side, go to the property "nameserver.address" where you will key in "tcpip://<nameserver>:<port>". Then hit "Update" and click on the "Save" button. Then when you go to TRex Monitor, you should be able to see the Name Server running. Hope this helps.
Thanks,
Sri
P.S Please rewards points if you find this helpful. Thanks.

Web service URL configuration for Xcelsius in BO XI3.1

Currently we can evaluate the BOE R2 and BOE XI3.1, and we are facing such a problem:
In R2, we configure the Web service URL for Tomcat in "...\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\WEB-INF\web.xml
", there is a parameter called "crystalxcelsius.webconnectorurl", we configure it like this:
<context-param>
        <param-name>crystalxcelsius.webconnectorurl</param-name>
        <param-value>
             http://XX:8080/dswsbobje/qaawsservices/queryasaservice
        </param-value>
</context-param>
How can we do the same configuration in BOE XI3.1?
We cannot find the same web.xml because the folder structure has changed.
After we deployed the Xcelsius dashboards from BOE R2 to BOE XI3.1, it failed and the error message shows:"Unable to load URL...".

The Xcelsius team is investigating this issue. We'll update you when possible. Meanwhile here is a suggestion from another user.
"The web service url setting was removed from XI R3 due to the changes in InfoView/CMC client action framework in XI R3. In XI R3, there are multiple web.xml files instead of just one web.xml. The parameters defined in Xcelsius' web.xml cannot be accessed by Crystal Report or WebI...
Anyway, I have a workaround might work (I never tried it myself). In Xcelsius design time, add a flashvars range name "CEWebServiceURL" and bind the value of this range to a cell that has the url of the web service you want to use at run-time. The SWF should use this url to refresh LiveOffice at run-time."

SAP J2EE engine for configuring Java mail Service.

Hi
I am experiencing following exception when trying to use JAVA mail API.
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
javax.mail.SendFailedException: 554 <email@ddress>: Recipient address rejected:
Relay access denied
email address above is valid..
I have to use SAP J2EE engine for configuring Java mail Service.
But is does not hav any such access permissions to check....!!

Relay access denied
To send mails from SAP system through the mail server which you have configured, SAP server should be permitted to relay through the mailserver. Then only you will be able to send mail to external email address. Otherwise, you will get the above message.
You must contact the mail server administrator and ask him to add the ip of SAP server into the allowed relay list.
If you are using MS exchange server as your mail server and if you have administrative access to the Exchange box, you can do it yourself by following the below steps:
1.Verify that your Exchange computer is not an open mail relay. To do this, follow these steps:
a.      Click Start, point to Programs, point to Microsoft Exchange, and then click System Manager.
b.      In Exchange System Manager, expand the following object:
Servers\Your_Exchange_Server_Name\Protocols\SMTP
c.      Right-click the virtual SMTP server where you want to prevent mail relay, and then click Properties.
d.      Click the Access tab, and then click Relay.
e.      By default, open relay is blocked. The default settings are as follows:
u2022     The Only the list below check box is selected.
u2022     The Allow all computers which successfully authenticate to relay, regardless of the list above check box is selected.
f.      If you must permit a single computer, a group of computers, or a domain to relay through the server, click Add. In the Computer dialog box, click the appropriate selection for the computers you want to relay through the server. Then, type the required information.
Note Enabling access by IP address or by domain name is helpful for users who do not authenticate with the Exchange computer.
g.      In the Relay Restrictions dialog box, click OK.
h.      Click Apply, and then click OK in the Default SMTP Virtual Server Properties dialog box.
hope this helps you out...
Cheers,
Jazz

AppUser configuration for AXL Serviceability

Similar Messages

Maybe you are looking for