AppV 5 HF5 packages using /appve fail for regular users on Win 7

Hello,
I've been struggling with some App-V packages that fail to start on Win 7 machines provided trough Xendesktop.
All packages in question make use of locally installed Internet Explorer 9 and /appve switch  :
"C:\Program Files (x86)\Internet Explorer\iexplore.exe"  /appvve:D89030F5-436B-4A82-A104-A5E5E8089824_6C521CD6-5116-4587-B9E8-E386075F7A79
All other streamed apps can be started fine (the ones not using /appve switch)
If I run this package as  a regular user I always get an error that "Internet Explorer has stopped working" and a error message in the application log:
Faulting application name: iexplore.exe, version: 9.0.8112.16599, time stamp: 0x5473964b
Faulting module name: AppVEntSubsystems32.dll, version: 5.0.3404.0, time stamp: 0x537e6b1f
Exception code: 0xc0000005
Fault offset: 0x00084444
Faulting process id: 0xecc
Faulting application start time: 0x01d0348e2b754fcb
Faulting application path: C:\Program Files (x86)\Internet Explorer\iexplore.exe
Faulting module path: C:\Program Files\Microsoft Application Virtualization\Client\Subsystems\AppVEntSubsystems32.dll
Report Id: 6adc7087-a081-11e4-96bf-001dd8f22044
If I start the application on the same machine using a domain account user the app starts fine.
Internet explorer works fine for the regular users.
On a machine running  Windows server 2008 R2 the same user can start the packages without any problems.
I've been looking at the permissions needed but can't seem to get to the end of this...
Has anyone seen the issue or has any clue what I can do?
Thanks!

It looks like some others have had issues with the /appvve switch in Citrix environments too:
http://discussions.citrix.com/topic/348733-publishing-app-v-50-app-with-appvve-switch/
I wonder if you've approached Citrix about this? I would assume it's something about the way Citrix pass the command
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

Similar Messages

  • Tacacs authentication fails for one user account for only one switch

    Hi,
    I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
    The same user account works well for other devices.
    The AAA configs are same on every devices in the network.
    Heres the show tacacs output from the switch where only one user account fails;
                  Socket opens:        157
                 Socket closes:        156
                 Socket aborts:        303
                 Socket errors:          1
               Socket Timeouts:          2
       Failed Connect Attempts:          0
            Total Packets Sent:       1703
            Total Packets Recv:       1243
              Expected Replies:          0
    What could be the reason ?
    No errors on ACS server; same rights had been given to the user account.
    Thanks to advise.
    Prasey

    Hi there,
    Does the user get authenticated in the ACS logs?
    reports and activity----> failed attempts
    ro
    reports and activity----->  passed authentications
    That will help narrow it down.
    Brad

  • Gnome won't start for regular user

    I've got Xorg installed, and KDE.  These both work fine for regular users.  I decided to put Gnome on the box and play with it, and it loads fine for root.  When I log in as a regular user and try to start Gnome, it comes up with an ugly desktop, a splash screen, then just an X for the mouse on the ugly desktop.
    I'm assuming this must be a permissions problem, but I'm not sure what needs to be changed.  I checked out the gnome and kde directories, and everything seems to be owned by root, so I know I'm missing something somewhere.
    If permissions, what needs to be changed?  If not, then what?

    I've upgraded to gnome 2.12, it still doesn't load
    As it _tries_ to load, it brings up a message box saying "gnome-settings-handler could not be started" or something to that effect, which basically means nothing can run.
    I tried deleting /tmp, didn't work.
    I'm getting _really_ frustrated
    I dont want to go back to XFCE (I dont want to open another terminal just to eject my dvd drive ever again), and I'm getting insanely sick of KDE.. it's just un-usable..
    Sorry if anyone out there likes KDE.. no offence.. but I just find it un-usable..

  • Check package/procedure level privileges for a user

    hi gurus,
    how to check the package/procedure level privileges for a user? like dba_tab_privs for tables.
    for eg: grant execute on dbms_scheduler to user1.
    now, i need to verify that user1 has execute privilege on dbms_scheduler or not.
    what's the view for this?
    thanks in advance,
    charles

    SQL> select privilege, count(*) from dba_tab_privs group by privilege order by 1;
    PRIVILEGE                       COUNT(*)
    ALTER                               19
    DEBUG                              256
    DELETE                              131
    DEQUEUE                            3
    EXECUTE                           19315
    FLASHBACK                          52
    INDEX                               14
    INSERT                              137
    MERGE VIEW                          36
    ON COMMIT REFRESH                     52
    QUERY REWRITE                          52
    PRIVILEGE                       COUNT(*)
    READ                                7
    REFERENCES                          54
    SELECT                                3752
    UNDER                                3
    UPDATE                              111
    WRITE                                5
    17 rows selected.DBA_TAB_PRIVS is for more than just tables.

  • Policy for using a licence for 2 users and technical restrictions

    Dear All,
    With the 2007 version, my customer was accustomed to using a licence for 2 users.
    Before the migration in 8.81 PL08, I warned him that that would not be possible any more with this new version because that had been said to us by SAP.
    All the users work remotely via TSE and the double login still seems to function properly
    I did not find SAP documentation relating to this question. Does somebody know it?
    Which is the rule for using a ID with two users on two different workstations? Which are the technical restrictions?
    Thanks in advance

    Hi,
    Welcome you post on the forum.
    The rule is: a same user code is allowed to open two sessions concurrently. This is not changed. This function is for the need a user may need both session to complete certain tasks.
    RSP has a new function to detect such case if the same B1 user are from two work stations. That is a sign to indicate this feature may be abused.
    Thanks,
    Gordon

  • ODBC--connection to 'SQL Serverservername' failed for one user but not another

    In Win7, we're linking tables in an MS Access 2010 db to tables in a SQL Server 2008 R2 db. The driver user by the File dsn is SQL Server version 6.01.7601.17514 & we're using SQL Server Authentication.
    For some reason, one user gets the msg "ODBC--connection to 'SQL Serverservername' failed" before they're even asked for a password, but for other users, the prompt comes up and when they uncheck the Windows Auth box, they enter their password
    and connect successfully to the SQL Server db.  Both users have db_datareader access to the SQL Server db.
    I had the user that gets the error msg log onto my PC and they get the same error (yet it works for me.)
    This user was, however, able to successfully relink the tables, but then when we closed the access db and opened it again, the user got the "ODBC--connection..." error agin.
    I'm stumped as to why this is happening for one user.

    Hello Knellen,
    Please help to collect more log information regarding this issue, such as windows event log, SQL Sever log information. They are helpful for us to troubleshoot it.
    Regards,
    Elvis Long
    TechNet Community Support

  • Installation requirements for regular user

    Hi,
    I'm building my first widget with Yahoo Widgets, Eclipse and the SAP Widget Foundation installed.
    I've got my widget working on my pc and can export the widget. Data retrieval from SAP is showing in the widget.
    I wonder what a regular user ( on an other pc) needs to install to use the widget? Only Yahoo widgets or more? Can he/she change the login settings?
    Any help will be appreciated. 
    Regards,
    Bert

    Hi Bert,
    You should install Yahoo widget Engine,SAP widget Foundation individually.
    My suggestion is you can install SAP widget foundation in one system and you can define the service provider in the same system so that it act as a server.
    Then from another PC you need to install only yahoo widget engine and consume the defined services.
    So this will be of  client/server model....
    please refer the below link for more details......I havent test the same scenario in case of  firewalls...
    /people/jaideep.srinivasan/blog/2008/02/09/enterprise-widgets-in-clientserver-environment
    thanks
    jaideep srinivasan

  • What's the best phone app to use on iPad for uk users to make calls with

    I know there's a few apps out there to use and make phone calls with, but which is the best one for uk users/callers.
    I would prefer not to use Skype but if that's the best on the market, that's what I will use.
    As you can probably guess I'm new to the iPad, so all the help I get is appreciated loads.

    Cheers for that, looks like I will have to use Skype then. Unless someone else comes up with an answer.

  • Organizational Forms Library FORM LOAD FAILS for one user

    I have a user who is unable to pull up any of the forms listed in the Organizational Forms Library under the Developer Tab within Outlook
    2010. Any other person on the same PC has no issues with the same thing. The user in question does not have any issues pulling up the same forms on any other PC.
    I suspect it was a profile issue so I logged in as admin then deleted the outlook folder under C:\Users\username\AppData\Local\Microsoft\Outlook
    for the user in question.
    Then logged back in as the user and let Outlook recreate the profile again. Still no go with being able to pull a form up.
    Any suggestions?
    Is there a registry key I should be playing with?

    Hi,
    Did the user get any error message?
    Outlook 2010 caches the names of the forms in the Exchange Organizational Forms Library. The cache expires every 24 hours. If a new form in the Organizational Forms Library has not been cached, Outlook displays an error. Please try to use the following
    registry to lower the timeout or disable it and then check the issue again.
    HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Forms\ClassNamesCache 
    DWORD: Timeout
    Decimal Value (in hours): 1 - 24
    DWORD: Disabled
    Value: 1
    For more information, please refer:
    http://www.slipstick.com/exchange/2010-exs/organizational-forms-library-exchange-2010/
    Regards,
    Steve Fan
    TechNet Community Support

  • Using CieLab Coordinates for Color production of wine

    I realize this may be a somewhat specialized and obscure use of Photoshop but I am a Wine Chemist and have been collecting color spectral data from my experimental wines and would like translate the spectra into a color for a presentation.
    I have all of the data from my wines including L*, C*, H*, a*, and b*. When I create a new lab color document and try to imput my color coordinates Photoshop CS4 has some different options than what I measure. For example the saturation or c* is listed for some reason as a percentage and if I type in a Hue value (which I have to subtract from 360) it automatically recalculates my L*, a* and b* values. Can anyone help?

    You'll need to convert your linear list to a string then save
    it. When
    reading it back you'll need to use the value function to
    convert it back to
    a list. You won't be able to include any entries with quotes.
    You're better off using an Xtra like propsave which is free
    and saves data
    in a binary file.
    Craig Wollman
    Word of Mouth Productions
    phone 212 928 9581
    fax 212 928 9582
    159-00 Riverside Drive West #5H-70
    NY, NY 10032
    www.wordofmouthpros.com
    "Jan Carlo" <[email protected]> wrote in
    message
    news:e2fo0k$n9n$[email protected]..
    > Hello to you
    >
    > I need to get pixel data from linear lists for
    clustering
    >
    > Does anyone have any suggestions on how to auto save
    lists in a text file
    > using the fileIO.
    > Currently I can only save text from a text field (not a
    list of values
    > such as
    > xy coordinates and RGB values) manually , but have
    problems with linear
    > lists..
    >
    > Have a glittering day
    >
    >

  • Aero greyed for regular users

    Hello,
    Aero is activated on my Windows 2008 R2 server, but can only be selected by the Administrator user through RDP, for a regular user through RDP, aero themes are greyed out!  The GP to allow composition is enabled.
    Where is the option that blocks this?  I checked the domain policies, but did not find anything.
    Thanks, Dominic

    Hi,
    You can enable below policy setting for allowing desktop composition for rd session. 
    Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Remote Session Environment
    Allow desktop composition for remote desktop sessions
    On Windows 2008 R2 server, after Aero Glass remoting is enabled, any new user connecting remotely with the proper client settings will automatically get Aero Glass in the remote session.
    Existing users on the server will need to manually change the theme in the remote session once by selecting the Windows 7 Aero theme in desktop personalization. Subsequent connections will automatically get the Aero theme in the remote session.
    Please check below article for more detail.
    Aero Glass Remoting in Windows Server 2008 R2
    http://blogs.msdn.com/b/rds/archive/2009/06/23/aero-glass-remoting-in-windows-server-2008-r2.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Outlook 2013 on terminal server Search failes for all users

    we have a small comany with a new Windows 2012 Fileserver and Terminal Server.
    Office 2013 is installed and we use Office 365 - Exchange Online as our mailserver.
    We use Outlook with the Cached Exchange Mode ON. We have shared our mailboxes with our collegues.
    Indexstatus is complete for all the users.
    So far the information i have.  
    I suspect wrong permissions on the Windows Search Folders are the cause of my problems but where can i find the Windows Search Folders which are indexed (and shoot be accesable for the users).

    Winnie, thank you for your answer. 
    1. Make sure indexing is complete. ==> Index is complete
    2. Make sure Indexing Options are configured correctly ==> Indexing Options are configured correctly for the administrator, Outlook
    isn't configured in de Indexing options for the users (that might be the problem i guess)
    3. Make sure Outlook data is included in indexing==>
    Outlook Data is included in indexing
    See screenshots below:
    First screenshot are the Indexing Options as configured for the users, the seconde one are the indexing options for the administrator. I suspect there is my problem, but can't find the solution the solve this for the users.

  • MAC authentication failed for Wired Users

    Hi,
    I tried to configure MAC authentication for registed users by ACS. But failed. Need help.

    ok ok..i got ur point....please correct me the config steps:
    1. Added switch as aaa client into acs
    2. entered machine mac address into acs user-setup as both usename & password.
    3. in 64,65 & 81 (in bother group & user setup) choosed 64=vlan; 65=802; 81=authenticated_vlan_id
    4. in switch
    aaa new-model
    aaa authentication dot1x default group radius
    radius-server host acs_ip auth-port 1645 acct-port 1646 key ****
    dot1x system-auth-control
    int fa0/1
    switchport mode access
    dot1x mac-auth-bypass
    dot1x port-control auto
    dot1x reauthentication
    dot1x pae authenticator
    dot1x guest-vlan 900
    Note: Whenever i issue the command "port-control auto" the line protocol of the port goes down.
    5. in end machine disable ieee 802.1x authentication.
    I will try this setting tomorrow & update you accordingly.

  • How to access Task details using BPM API for substituting user

    Hi Expert,
    I need one help, we have a requirement, in which I wanted to access the BPM task details of a user which is substituting user using BPM API.
    Substituting user's name is not exist in Potential owner of Task. That’s why Using method "getMyTaskAbstracts(Status)" we cant acess those task which assigned by Substited user.
    Kindly let me know if there is any way, we can get task details of the task which assigned by substituted user to substituting user.
    Regards
    Div

    Pl use this api.
    getTaskAbstractsForMySubstitutedUsers.There are couple of variations u can use.
    Thanks
    Manish

  • How to create a shortcut for all users in Win 7 and Win 8?

    Hi,
    I'll trying to make a script that will create a shortcut in every user profile account in a computer. I stumble upon the script below from
    http://gallery.technet.microsoft.com/scriptcenter/Create-shortcut-in-your-11cfd3de/view/Discussions#content.
    Option Explicit
    On Error Resume Next
    Dim objShell
    Dim objDesktop
    Dim  objLink
    Dim strAppPath
    Dim strWorkDir
    Dim strIconPath
    strWorkDir ="C:\Program Files\Microsoft Office\Office15"
    strAppPath = "C:\Program Files\Microsoft Office\Office15\ORGCHART.EXE"  'you have to use your URL to Interanet site or path to specific program
    'strIconPath = "\\server\Xyz.ico"     'specify the path to the icon please change to your valid path
    Set objShell = CreateObject("WScript.Shell")
    'objDesktop = objShell.SpecialFolders("Desktop")
    Set objLink = objShell.CreateShortcut("C:\Users\%userprofile%\Desktop\Org_chart_test.lnk") 'change here To your shortcut name
    objLink.Description = "this is a test" 'replaec with your description
    'objLink.IconLocation = strIconPath
    objLink.TargetPath = strAppPath
    objLink.WindowStyle = 3
    objLink.WorkingDirectory = strWorkDir
    objLink.Save
    I did some modifications to cater to my need. Now the question is, how can I make the script create a shortcut for every user profile from the script above?
    Any inputs would be greatly appreciated.
    Thanks!

    You could create the shortcut at one machine, then copy it to the target as part of the logon script. Note also that this line contains an error:
    "C:\Users\%userprofile%\Desktop\Org_chart_test.lnk"
    It should read:
    "%userprofile%\Desktop\Org_chart_test.lnk"

Maybe you are looking for