Appworld does not start... again!

Hey everyone
since I upgraded my BlackBerry Appworld application to version 1.1.0.15 it does not start anymore. Updating to the latest version (1.1.0.19) did NOT solve the problem. Reinstalling doesn't help either.
As far as I know this is a known bug. Does anyone know if a solution exists?
I'm using Appworld in German.
Thanks for help
Seb

OK...well, my German is a bit rusty, so I can't read that. But no matter...I don't know if that's an official RIM source or not...if it's just, like here, users saying what they say, then it can't necessarily be taken as authoritative. Nonetheless, your possible solutions are indeed recommended. I recommend that you do this:
1) Remove AppWorld from your BB (Homescreen > Options > Advanced Options > Applications) -- if it requests that you reboot the BB, do so.
2) Do a proper Batt-Pull reboot (with power ON, remove the battery, wait, replace, reboot).
3) Get a new link and install a fresh copy of AppWorld (I don't know if there is a different link for different regions)
http://na.blackberry.com/eng/services/appworld/download.jsp#tab_tab_download
Again, if it requests to reboot, do so.
4) Do another Batt-Pull reboot
5) See if it now works.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

[Solved]Laptop does not start (not even bios)

Hi all,
I was about to install archlinux on my laptop. When I generate partitions (I used GPT), I saw something like this:
"If you have a BIOS motherboard (or plan on booting in BIOS compatibility mode) and you want to setup GRUB on a GPT-partitioned drive, you will need to create an extra BIOS Boot Partition of size 1 or 2 MiB and EF02 type code. Syslinux does not need one."
So, I was planning to make this. When I run cgdisk, I was that lthere was a 1007kb unusued(?) space. So I thought I can use this space for boot sector. Then I changed its type to EF02. When I did this, my laptop shutted down quickly and does not start again. When I press the power up button; I hear the usual starting noise, and then it shuts down again.
What did I do to my laptop?
What I tried:
Remove battery, wait for 5 minutes, try again
Remove hdd, try again
Unplug&plug bios battery, try again
Edit: Solved with a shame. Wall-charger was unplugged. This topic can be removed.
Last edited by firatakandere (2013-12-24 17:09:56)

firatakandere wrote:Wall-charger was unplugged. This topic can be removed.
Why? Others may learn for your experience
Welcome to Arch Linux.

My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it via internet the first time december 2013?)

My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it from Adobe via internet the first time december 2013?)

Did you download the Basic/Free version?
I also thought the Trial period was as long as you needed!?
What is your Warranty and Return Policy?
You get to use VueScan for as long as you want before you buy it, so we recommend you test it before you buy it to make sure it meets your needs.
All sales are final and there are no refunds.
Isn't this a bit harsh? Naah I actually prefer to solve problems, and if I offer refunds, people give up too easily. If I can't solve your problem after you send a few Problem Reports (see above), I'm happy to give a refund.
http://www.hamrick.com/sup.html#q

My iPhone4 does not start after it was out of charge and recharged again?

My iPhone 4 does not start after it was out of charge and recharged again?

Hi Svedjot,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
Cheers,
Judy

TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
Terrence

Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

Hi,i have a very big problem....i had an accident with my macbook , i poured some champagne and it does not start anymore....it will work again???

hi,i have a very big problem....i had an accident with my macbook , i poured some champagne and it does not start anymore....it will work again???

If you spilled champagne on it, chances are not good. If you haven't alredy DO NOT turn it on or charge it. I would immediately take it to the Genius Bar and see if they can clean it up before.
Had the same problem with a 15" MBP and a tea spill and I did the opposite. Trashed the Logic & Keyboard Assembly. Cost to repair was going to be more than what I paid for a computer so ended up having to replace it.

My imac does not start anymore (stops at the screen with the apple and a rotating circle). An idea what I could try to make it start again?

My Imac does not start anymore.
==> What I have already done:
1) I tried with the tigger dvd to reinstall. It didn't succeed.
2) Via the single mode, when starting I got the message "disk0s2: I/0 error" several times. After that I got "Root device is mounted read-only"
3) Nevertheless, I tried the "fsck -yf" function. After checking "Journal HFS Plus volume", "extends overflow file", "catalog file"... and invalid record count
==> /dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8
Can someone advices me? I red on the internet I could reformat the disk... loosing all the data I didn't backed up. How am I suppose to reformat?
Thanks in advance,
Fred

Reset the SMC: http://support.apple.com/kb/HT3964
Reset the PRAM: http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
Restart the computer while holding down your mouse button which if you hold it down long enough (5 minutes at most) should eject the disk
If the disk still doesn't come out at that point then you need hardware evaluation;
contact Apple, contact an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.

Itunes does not start and i cannot sync my iphone 4

I have installed Itunes 10.1.1.4 on my computer running Windows XP but it does not start. This prevent me to sync my new iphone 4.
Previously I had other versions of itunes on the computer and sometimes the same problem happened.
I did a search on Apple support and I followed the instructions (itunes disinstallation and reinstallation) but it didn't work.
I tried also to disable all the startup app but itunes using msconfig (as again suggested by apple) but it din't work as well.
Somewhere on internet I found that Bonjour could create the problem: using services.msc I disabled it but it din't work as well.
I would appreciate very much if someone could help me.
Thanks in advance.
Regards
Giovanni

Hello tomcat.vdm,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Best of luck,
Mario

Can not update tiger and safari does not start

Hi everybody,
I have actually two but probably interrelated problems: First, safari does not start and second, I can not update tiger.
It all started a few days ago on my MacBook (Intel). Somehow, Safari produced an error (I only guess that it was Safari because I was downloading a movie clip) and Tiger was frozen. After rebooting, the whole system had problems (e.g., Safari and Skype were not starting). I tried to reinstall and archive mac os x but with no success. The problems were growing actually even worse (e.g., slow) and at some point in time, Tiger was not even starting. Thus, I did a full new installation of 10.4.8 (delete and install). Afterwards, it worked first but after the automatic software update, the system told me that their was an input/output error (???) during the 10.4.10 update. Afterwards, the whole system had again problems (slow and problems with even booting)!! Thus, the software update made it even worse. So, I did again a full installation (delete and install).
I have to update my 10.4.8 system, because I also have iLife08 that needs at least 10.4.9. However, I don't know what to do to avoid again these update problems??
In addition, despite the full installation, Safari is not starting. Thus, there is still some problems but I have now clue where this comes from as it is newly installed?!
Any ideas?? Thanks...
Crobus

Crobus, welcome, since you are starting from scratch with each re-install why not try Kappy's Extended Hard Drive Preparation.
http://discussions.apple.com/thread.jspa?messageID=5203987&#5203987
Do all steps from 1 thru 6, it is by far a more maintenance oriented than an Erase and Install. After the preparation, install OS 10 from your DVD, then download the OS 10.4.10 Combo Updater.
Joe

Zune Software does not start on WIN 8.1 PRO

whenever I need to run ZUNE software to update my phone or just edit my music collection my Zune software does not start. I only get a window alert saying [Windows cannot find 'C:\Program Files\Zune\Zune.exe'. Make sure you typed the name correctly,
and then try again.]
Troubleshoot performed:
-uninstall software, reinstalled with administrative privileges, run the program and does not start, end up with same message. (many, many times)
- Installed it in different directory, installed all windows updates, run program and same symptom
- installed the MUSIC app from windows Store, helps but does not let me edit mysong collections app really is not the appropiate one
-cannot download my photos or videos, please HELP!
*** Is there a way I can download my pics and videos without ZUNE? Is there a FIX IT program for Windows 8 PRO, just in case there might be a problem with registry entries? ***
Machine DELL XPS
Windows 8.1 PRo
Intel Core i7 - 16 GB RAM 64 bit Operating System, x64 based processor

Whaaaaaat...???????
It is not compatible? How do i transfer my music, pictures, videos.??? Cant beleive it..!!
HELP HELP

MacBook pro does not start. How can I back to Mac OS X Lion?

I have a MacBook Pro. On my MacBook i made three partition, then I installed window 8. After that I started windos and try to delete third partition by Administrator tool from windows operating system. After that my MacBook does not start. How can I back to Mac OS X Lion?
After that I again install windows 8 from a DVD. Windows start well, but I can not start Mac OS system, may be it was 10.6. Sever times I tried to install OS X Lion 10.7 thought DVD, I could not. On MacBook I have a lot of important data.
What can I do. I want to a complete suggestion. Please help me to solve the problem.
My MacBook Pro model no. A1286.

You installed Windows improperly the result of which was to wipe out the bootloader for OS X. You can give this a try:
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select the OS X disk icon from which you want to boot.
5. Click on the arrow button below the icon.
If you are still unable to boot from the OS X volume then you will need to reinstall OS X:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
This will destroy the Windows bootloader so you cannot boot into Windows. The solution is to remove all the partitions on the drive except the OS X partition, then expand the OS X partition to take up the entire drive.
Use Boot Camp Assistant in the Utilities folder to create a Windows partition on which you can install Windows. You cannot have any other partitions on the drive besides these two.
Now given all the above you may be able to install a third-party bootloader that would work with the setup you now have: Boot Runner 1.4.

My database does not start automatically

i am using windows 2000 server and oracle 9.0.1, my database does not start automatically when i am booting the system.
in regedit autostart is there, my service is getting started automatically and i used startmode auto in my oradim command but still i have to manually log in to start the database, PLS help!!!
another issue is that i want to startup/shutdown the database using a user other than sysdba, pls tell which permission shud i grant as dba, connect, resource permissions are not doing the required job

spfile concept is introduced from Oracle 9i. You can call it system parameter file. Benefits of having spfile concept is that what ever changes u make to system through commands
alter system set ??? = ????
get automatically saved in the spfile???.ora which is managed by Oracle.
Main idea behind that as thought by Oracle is that previously u needed to change that parameter in init.ora file then start the database again after shutdown. Now u are doing everything online. spfile???.ora takes priority in the new Oracle concept.
If u delete spfile???.ora file, then it needs some specific init.ora which need to told to Oracle which can be through command like
startup pfile='complete patah .............'
Bansal

Oracle does not start automatically ORA-01031: insufficient privileges

Hi,
OS WS2008R2.
ORACLE 11gR2.
Oracle Instance does not start with oracle services but if i stop and restart the services it comes up clean.
Moreover if i change service ownership to Domain\Administrator it again works well.
Checked registery and all ok. No error in alert.log. Only clue found in Oradim.log.
ORADIM.LOG....
C:\Oracle\Ora11g\bin\oradim.exe -startup -sid ptdb -usrpwd * -log oradim.log -nocheck 0
Thu Nov 15 15:16:15 2012
ORA-01031: insufficient privileges
Please help
Thanks

1- startup type- Auto
2- Group to user- ORA_DBA
3 - you can check log on tab in the service properties and set the username and password who responsible about this services
As i already stated 3 works. but i want it to work under Local System and not under any user.
Thanks

PIA service does not start

Hi,
my webserver is Weblogic (9.2, Tools 8.49 , HRMS90). PIa service does not start automaticaly when I start/boot the server. I should run startPIA.cmd. And then I can connect in 4/3.
Do you have any idea for that ?
In windows Evenetlog it says Event Type: Warning
Event Source: beasvc
Description:
peoplesoft-PIA service stopped
Thank for help.

after u install PIA , u can start the server from the cmd by issuing a command called StartPIA.cmd ,
or u can tie the domain to a service type called NT service, and schedule the service to be automatic. it keeps running as long as ur box is up. once u reboot it , service stops for a while and start again. this is automatic type of bringing up the server.
ur bEA weblogic when installed sets the path for jdk and jre which are used by the server to come up properly.
even after this if u have trouble, please paste the logs. logs are found under PS_HOME\webserver\domain_name\logs
bea logs are under bea DIR.
Thnks!

Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

Hi,
I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
Tried manually start services, it started successfully but again goes down within few seconds automatically.
Reboot server. but no luck.
Any help.
MD

Hi,
I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
Thanks.
Niko Cheng
TechNet Community Support

Appworld does not start... again!

Similar Messages

Maybe you are looking for