Apraisal action log - without action "display"

Hi,
we are using the standard action log for apraisals. But it's very large and so we don't want to save all "display" actions.
Is there a BADI or a customizing table where we can switch out the looging of the display of an apraisal?
Thanks in advance
Jürgen

Hi
You can do the same. It can be done, you need to call in the following struture in your BOL layer CRMT_ACTION_GRID which coantins all your required data. You need to craete a Z implementation class where in you need to code in for fetching the values from the structure and fill in your view.
Regards,
Pranay

Similar Messages

SM35P - Logs without sessions

Dear All,
In SM35P (Batch Input - Log Overview), there are two options,
1. Logs with session
2. Logs without session
To my understanding, Session will be created with BDC (Session method). Please explain me what is meant by "Logs without session" & in what scenarios, these will be used & so on. Please throw some light on this query.
Thanks,
Vamsi

Thanks guys.
Not sure how to use RSTS0030 - there appears to be no way to select individual entries once the list has been displayed, and clicking 'delete selected' doesn't do anything...
However, we have managed to clear these by doing the following:
Go to the "Logs without sessions" tab. Double click on each item and make a note of the TemSe ID.
Now open a new session (don't close this one) and run transaction SP12. Select Goto-> TemSe contents from the menu and enter the TemSe ID from before. Make sure that the date is set to a valid date. Click 'list objects'. Select the object and click 'delete'.
Now go back to your SM35 screen. Come back out so you are on the 'logs without sessions' tab then right click and choose to APQL consistency. It might take quite a long while to bring up.
Search for the TemSe ID(s) in the list, click the tick box for each one, and then delete selections.
Go back and they should have gone (may need to refresh).
Ross

I just brought Macbook pro(without retina display) on 15 june 2013 and since then put it on 6-7 hours of charging but still my macbook pro is not 100% charged. but why? (green light is displayed on the adapter pin)

i just brought Macbook pro(without retina display) on 15 june 2013 and when i switched it on the battery was 72 % charged and now the battery is charged to 62%, i used the charger that came with it and kept it for 6-7 hours on charging but it is not charged to 100% but why? also the green light is always on when i plug the charger with my mac book pro.Please tell me the meaning of Green light on power cord lid (mac book pro not charging or charging?) and also the other light if there like amber or any other colour.

Hello Shailendras33,
Congratulations on your new MacBook Pro! Thank you for providing all the information about what is going on with the charging issue.
Firstly, I found some information on page 11 of the MacBook Pro User Guide about what each color of the LED means on the Power Adapter:
When you first connect your power adapter to your MacBook Pro, an indicator light on the
MagSafe connector starts to glow. An amber light indicates the battery is charging. A green light indicates that the battery is fully charged.
You can find the MacBook Pro User Guide here (this is not for the latest MacBook Pro, but the information about the MagSafe adapter is true for the newest model):
MacBook Pro User Guide
http://manuals.info.apple.com/en_US/macbook_pro_15inch_late_2011.pdf
It sounds like you are not getting the amber light indicating your computer is charging, and you are noticing that the battery level is depleting. I recommend resetting your System Management Controller when something like this is occurring:
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign

Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign (circle w line through it) when attempting to login from guest account it takes me to screen that says that the computer will restart to a safe safari system for the guest user. I waited for a longer time and the grey denim screen comes up. By the apple in left upper corner it said I think LSA? Then safari menu bar. The page it loads to us file:///System/Installation/CDIS/Mac%2005%20X%20Utilities.app/Contents/Resource s/English.iproj/GuestLoginInfirmation.html
Can someone HELP? I'm afraid I might do something wrong

What backups do you have?

HT201263 I have restored my iPad (first generation without retina display) and it finishes restoring software but will not stay on for me to restore the data and then shuts off whenever I try to turn it on. I don't believe that it is charging! HELP!

Long story about what happened but basically I was using the iPad (first generation without retina display) to watch TV at one point it had 20% battery so I plugged it in then it wasn't charging and I didn't realize so it got to 5% and shut off. I plugged it in to charge it but it just kept shutting down and showing the apple logo, then briefly showing me my home screen before shutting off again. I waited a while to see if it would charge, while it continued to turn off and on by itself. Finally, I unplugged it to see if it had gotten any charge but it just told me to plug it in again. I plugged it into a different charger, same thing. I decided to try connecting it to a computer and it stopped turning on but it did not seem to charge. I tried restoring it as it said in the article. It worked until it got to restoring the iPad from the backup that I had because it immediately shutdown before I could continue. I tried to restore it a second time but still it shut down! I'm so frusturated and I cannot afford to get a new iPad, I need it for school and there is no Apple store for 80 miles nor do I have any insurance or warranty on it! (Obviously considering it's the first iPad to ever come out.) I really don't know what to do! HELP

Try this Support Article > http://support.apple.com/kb/HT1808

Using PowerMac G4 without any display

Hi!
I have PowerMac G4 867/QS whith 17" Apple Studio Display (ADC). It is very noisy, so It are sitting in my closet , and I manage them from my main iMac using ARD.
Can I disconnect Apple Studio Display and run PowerMac without any display?
Thanx!

I'm trying restart the PowerMac (monitor is disconnected) from ARD , but it shuts down! Then I press the Power button, PowerMac start up and ARD restore the connection, but the ARD Desktop window is now no more than 800x600 !
mage: !http://grab.by/Vd7!
In fact, I could then set my screen resolution:
!http://grab.by/VdF!
Is it possible to restart a PowerMac without a display via ARD and preserve the high resolution screen?
Perhaps there is an emulator display (plug in to DVI or VGA output).
Thanx!

Run iPhoto slideshow on 2nd display without 1st display going black?

Hi there,
I can't seem to find a clear answer on this one. I have just connected a 2nd display to my mac mini via the thunderbolt connection. When I put iPhoto 11 onto the 2nd display desktop and run a slideshow it plays on the 2nd screen but my 1st screen goes black, which isnt ideal as I want to be able to carry on working on my 1st screen.
Is iPhoto 11 able to run a slideshow on a 2nd display without 1st display going black? If not, is there a way around this by using other software?
I have the 2nd display set up in extended mode not mirror.
I am running OSX 10.9.2.
Many thanks,
Andy.

Is iPhoto 11 able to run a slideshow on a 2nd display without 1st display going black?
No.
There may well be, but it's not possible with Aperture either.
Alternatives to iPhoto's slideshow include:
iMovie is on every Mac sold.
Others, in order of price:
PhotoPresenter $29
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
Final Cut Pro X $299
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Pro X is the most capable app of them all. You get what you pay for.

I am planning on purchasing an Apple 13in MacBook Pro through AAFES online (Army and Airforce Exchange). Do all MacBook Pro computers without retina display come with a SuperDrive?

Do all MacBook Pro computers (without retina display) come with a CD/DVD drive?

Up to the Mid-2012 models, yes.

Log Out causes display distortion

Hi folks
I currently have two user accounts on my MacBook Pro because of a recent attempt to use Migration Assistant. While trying to sort out the mess this has left me with, I have been switching between the 2 accounts.
I have noticed that when I log out the displayed in shortened in the vertical direction, leaving me with black bars about 1cm wide on top and below. In addition, the clarity of the display is blurred slightly. Switching back to the other account does not fix the issue, though if I restart and login from there everything is normal.
Something about logging out is causing the issue. Any ideas?
Thanks

Well my problem did NOT go away either. At the Apple Store, I had 3 geniuses help and no one could figure it out. AppleCare top support people as well. No one knew. Hardware checked out. Software seemed fine. Solution? They gave me a new machine. Not what I was hoping for as I wish they found the answer. However, the unit is said to go to Apple diagnostics and they will trouble shoot it. Hopefully, someday we will get an answer. Until then, I wish everybody well and hope this doesn't happen to everybody's MBP 15 i7.
One question - how did all of you bring in your user (home) files, if you did. I had dragged over my home folder so there was POSSIBLY an issue in there that the new i7 doesn't like?
If one of you above, did NOT bring in a home folder, that would get rid of one culprit.

Report Execution time in NQQuery.log should be display in Milliseconds

Report Execution time in NQQuery.log should be display in Milliseconds.
For Example :
--- Logical Query Summary Stats: Elapsed time 0, Response time 0, Compilation time 0 (seconds)
Can we see the logical Query Summary Stats in milliseconds?
If so Where should i cofigure to populate this.

No. If you query comes in less that 1 second then you got nothing to worry about. I haven't seen a single DWH where users would worry about queries returning in milliseconds.

Capturing Batch Input Log without keeping BDC session

Hi all -
Would like to capture the Batch Input log and keep it persistent in some manner (for example using an application log) without keeping the corresponding BDC session. The reason for this is that any manual corrections to data interfaces through BDC sessions MUST be logged indefinitely for audit purposes. The actual BDC sessions are HUGE and therefore precludes saving the entire BDC session. My thoughts are user-exit'ing in BDC session either as a Batch Input Log is being created or when a Session is being deleted (NOTE: running ECC 6.0 which has new enhancement concept permitting extremely flexible user-exit'ing so exit points are NOT an issue and repair/core mode not required). Anyone see any flaws with this approach or can recommend perhaps a simpler or standard approach so that Batch Input Logs are retained indefinitely whereas the Session is deleted?
Many thanks,
Pat

Hi Pat,
Why dont you try archiving?
For archiving, archive object BDCLOGPROD can be used. if archived, then you can read the archived logs using program RSBDC_ARCHREAD (also accessible from SARA->Read).
See some notes if it is helpful:
147354, 18319, 24438, 18307
Also have a look at the Data Management Guide available at service.sap.com/data-archiving.
Hope this helps,
Naveen

Load image data into array collection without ever displaying it

Hi all,
I am starting with a String that is a path to a local file. I
need to add that image (png) to an array collection without ever
displaying it on screen. What would be the most direct process to
get it into the type BitmapData.
No matter what i try, i cant seem to get the image to
actually load into memory so it is available without displaying it
on the screen. Thanks in advance,

Hi Jed,
In AIR, you can simply use FileStream's readBytes() call to
read the contents of the image file into a bytearray. Now when you
want to display the image, simply use Loader.loadBytes().
Once the loadBytes() call completes, you will be able to get
bitmap data. Till then it would be in JPG/PNG/GIF format.

Firefighter Config change logs / SOD logs are not displayed..

We are on GRC 5.3, SP8. I have configured the SUP and firefighter id's are working fine. However, I am getting the message " No match nor conflict found " when I execute the 'Configuration Change Log report' and 'SOD Violations Report' even though the we changed the configuration and FF id's executed conflicting transactions defined in RAR. ' Log data changes ' box is already activated in the following tables:
1. Configuration (/VIRSA/ZFFCONFIG)
2. Controllers (/VIRSA/ZFFCNTRL)
3. Critical Tcodes (/VIRSA/ZVIRTCODE)
4. Firefighters (/VIRSA/ZFFUSERS)
5. Owners (/VIRSA/ZVIRFFIDS)
6. Reason Codes (/VIRSA/ZFFRCD)
7. Security (/VIRSA/ZVIRFFPWD)
Still the logs are not displayed. Thanks for your help.
Regards,
Raj

Hi Raj,
Can you check the SM37 background job../VIRSA/ZVFATBAK is running or NOT???
Regards'
Gangadhar

Log of table display

Dear All,
Is there any facility of audit for checking who has looked into the SRM tables through SE16 or through function modules. As bid prices are very sensitive in nature and nobody should see it through tables etc, this log/audit becomes important.
If there is no facility provided by SAP, can a functionality be developed for putting the audit trail for display of tables?
Regards
Amit

The System Log is available for at Data Base (SE11->Table->Technical Details) Object level and you can see the details using transaction SCU3.
Here are more details:
The logging flag defines whether changes to the data records of a table should be logged. If logging is activated, every change (with UPDATE, DELETE) to an existing data record by a user or an application program is recorded in a log table in the database.
Note: Activating logging slows down accesses that change the table. First of all, a record must be written in the log table for each change. Secondly, many users access this log table in parallel. This could cause lock situations even though the users are working with different application tables.
Dependencies
Logging only takes place if parameter rec/client in the system profile is set correctly. Setting the flag on its own does not cause the table changes to be logged.
The existing logs can be displayed with Transaction Table history (SCU3).

I need to reinstall my OS without a display

I have a new iMac and will be selling my G5. Rather stupidly I sold my cinema display first, so have nothing to view the G5 in. I've wiped the drive clean using a Firewire 800 in to the iMac. I have the originall install disks, and have inserted the first one and started up, holding down 'C'. As I can't see what's going on, will this have reinstalled the system, or are there things I need to do with the keyboard to make it happen.
Also, I upgraded to Leopard at some point and have the disc. Will I just need to send this with the machine, or is it possible also to install that without my display?
Thanks.

And lastly, Id pull the HD and keep it.
Thanks very much folks. I think I'll just sell it with the discs. Do you know if I can also give the new owner my Leopard disc (startup discs are Tiger) even though I registered it?
Simply because just selling it with your data on there is just stupidity (take no offense) This can lead to various problems in the future especially as this economy goes to **** in a handbasket. I would put it in a nother Mac and reformat it, or simply sell the Mac without an HD unless of course, you use Target Disk Mode to reformat it
Regards.
Message was edited by: Matthew Knice

Nokia E73- Call log does not display entries

I recently purchased a E73 by itself.
For some reason the call log does not display any telephone numbers or activity in recent calls; missed calls, received calls, dialed numbers. It would show that I have a missed call but when I enter it, it says (no missed calls).
Any ideas? Please let me know...
Thanks

Enable and set log duration to 30days.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Apraisal action log - without action "display"

Similar Messages

Maybe you are looking for