Après chargement d'adobe premiere elements 10 pb .

Après chargement d'Adobe premiere elements 10, j'ai chargé le film créé avec premiere elements 2.0
Dès que je veux utiliser des photos à partir d'un fichier , un écran bleu apparait avec message d'erreur. Que faire ?

Hello--can you please repost your question in English?

Similar Messages

Supprimer "creation avec la version d'essais d'Adobe premiere elements" après achat de licence

Bonjour,
j'ai fais des montages avec la version d’évaluation d'adobe premiere elements 12 pour tester le programme et je viens d'acheter sur adobe store la licence.
J'espérais que les projets déjà créés n'auraient plus la bande de marquage au milieu après avoir entré le code, mais sur mes anciens projets, le marque est toujours là. Y-a-t-il moyen de supprimer ce bandeau sans devoir recommencer tout le projet à zéro?
Merci
Damien

Bonjour,
J'ai eu le même problème, j'ai trouvé la solution sur les forum en anglais.
Il faut supprimer le fichiers de rendu
Montage --> Supprimer les fichiers de rendu pour tous les projets.
Tu refais un rendu et il n'y a plus le bandeau.
Pas besoin de tout refaire !
A+

Adobe Premiere Elements 10 And Flip MinoHD Generation III Compatibility

I am considering buying Adobe Premiere Elements 10 to edit my videos and I want to know if it is compatible with the video from the Flip Mino HD Generation III camera?

Okay, I think I have found what you are asking:
LCD screen - 2"
Resolution - diagonal 320x240
Type - Transflective TFT (for bright daylight)
Video Quality And Performance
Resolution - 1280 x 720
Sensor - 1/4.5 inch, 1.6 megapixel CMOS sensor (2.2 x 2.2 µm square pixels)
Light Sensitivity - Ultra low-light sensitivity (>1.4 V/lux-sec) with automatic low light detection
Frame Rate - 50/60 frames per second (constant frame rate, progressive scan)
Average Bit Rate - Variable, 8.8 Megabits on average
Video Format - MP4 file format
White Balance and Exposure - Automatic white balance and black level calibration & Automatic exposure control with dynamic exposure compensation
OPTICS
Lens Type - Fixed Focus (1.5m to infinity)
Apeture - f/2.4 (fast lens for great results in low-light environments)
Zoom - Smooth multi-step 2x digital
BATTERY
Type - Sealed internal Li-Ion rechargeable battery (3.7 Volt, 1300 mAh) – Rechargeable through USB
LIfe - Up to 2 hrs of use between charges
There's more if this isn't enough. LOLOL :-D
TY for helping, Bill.

Une bande indiquant ''Création avec la version d'essai d'Adobe Premiere Elements'' apparaît lorsque j'ouvre mes extraits vidéos... Disparaîtra-t-elle une fois que j'acheterai le logiciel?

Bonjour,
J'ai téléchargé sur mon MAC le mois passé la version gratuite de 30 jours d'Adobe Premiere Elements 12. Avec cette version, j'ai pu créer plusieurs extraits vidéos pour mon assistanat de recherche à l'école.
Maintenant, la version d'essai a expiré et une bande (avec les mots: Création avec la version d'essai d'Adobe Premiere Elements) apparaît à chaque fois que je fais jouer l'un de mes extraits vidéos. Je ne pourrai pas me servir de ces extraits si cette bande ne disparaît pas... et je ne veux pas recommencer tout mon travail! Pourtant, lorsque j'utilisais la version d'essai, aucune bande n'apparaissait lorsque je faisais jouer les extraits....
Ma question est donc la suivante: Si j'achète la version Adobe Premiere Elements 13... y a-t-il ainsi une chance que cette bande disparaisse et que je puisse à nouveau me servir de mes extraits?
MERCI!

saramv
I do not believe your question has been answered if you are inquiring about how to remove the Adobe watermark from video that you have exported from the Premiere Elements tryout.
You cannot remove the Adobe watermark from exports from the tryout, be the export a file saved to the computer hard drive or a burn to disc. Does not matter if you purchase the product later.
You can remove the Adobe watermark from a project file (project.prel) from the tryout Premiere Elements after you purchase the program.
When you open a project.file (project.prel) from the tryout Premiere Elements in the purchased product, there are two possibilities for removing the Adobe watermark from that project file...
a. Go to Timeline Menu/Delete Rendered Files...click on that.
or
b. Let the purchased program do it for you automatically...some of us have found this to be the case.
Please see which one works for you.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Exporting for Adobe Premiere Elements

Hello-
I need to send a few HD (1440x1080) clips to someone who will edit them using Adobe Premiere Elements. My sequence is ProRess422 HQ. Does anyone know if I can export a .mov file leaving it in ProRess? If not, can anyone suggest a good encoding method.
Thanks

If he is on a PC he can read the pro res files but not create prores files
same true if he's on a mac and does not have FCP on that machine.
apple makes available the decoder free of charge on their website for mac or PC
If they have to come back to you for you to edit further there will be an issue.
the cleanest way for him to output to you if they need to come back is animation codec.
they will need to be rendered in FCP. The other is sequential files tiff or targa if he's on a PC
drop them into a sequence that is set up for pro res and render that out which will get you back inpro res fairly cleanly

Je ne trouve pas l'effet Suivi de trajectoire dans Adobe Premiere Elements 11.

Bonjour, je ne trouve pas l'effet Suivi de trajectoire dans Adobe Premiere Elements 11. Quelqu'un saurait-il m'aider? Merci

Antoine wrote in French
(Google Translate)
Thank you very much for the information. It was good << Motion Tracking'' I wanted to talk. I am very disappointed that this feature is not in Adobe Premiere Elements 11 because I take care to create music videos with this program and it would have served me well, there is no way to fix this error for users do an update? I'm trying to specialize in special effects, but I'm not an expert. I really want to have Adobe Premiere Pro CS6 and Adobe After Effects CS6 but I do not have the budget. Thank you.
Antoine
My Reply In English
(Google Translate)
Antoine
La fonction de suivi de mouvement de la version antérieure est définitivement disparu de Premiere Elements 11. Il ya une nouvelle version de Premiere Elements doit être publié prochainement, et personne ne connaît les caractéristiques (neuf ou ancien) qui seront en elle. Je doute Motion Tracking sera de retour, mais c'est juste une supposition.
Selon la nature de l'effet spécial, vous voudrez peut-être explorer et expérimenter avec le Masque des effets (Menu Clip / Effets Mask) caractéristique de Premiere Elements 11, et keyframing la propriété de mouvement / de position du masque - après application des effets de masque, s'il vous plaît voir les effets appliqués / effets appliqués Palette / Motion panneau développé propriété / Position.
Nous espérons que pourrait fonctionner pour vous.
S'il vous plaît mettre à jour nous sur votre progrès.
Je vous remercie.
ATR
English Version Of My Reply
Antoine
The Motion Tracking feature of earlier version is definitely gone from Premiere Elements 11. There is a new version of Premiere Elements due to be released soon, and no one knows the features (new or old) that will be in it. I doubt Motion Tracking will return, but that is just a guess.
Depending on the nature of the special effect, you might want to explore and experiment with the Effects Mask (Clip Menu/Effects Mask) feature of Premiere Elements 11, and keyframing the Motion/Position property of the Mask - after applying Effects Mask, please see Applied Effects/Applied Effects Palette/Motion Panel expanded/Position property.
We hope that might work for you.
Please update us on your progress.
Thank you.
ATR

Concerne ADOBE PREMIERE ELEMENT - Vidéo en MP4 émanant de ADSL-TV non supportée bien qu'en MP4 ???

Bonjour,
J'ai installé la version d'évaluation de ADOBE PREMIERE ELEMENT 13 afin de tester la possibilité de supprimer certains éléments d'une vidéo acquise avec ADSL-TV en MP4. Or lors du chargement de la vidéo il y a un message m'indiquant "erreur générique"... Je suis donc contraint de faire transiter ma vidéo par Windows Movie Maker qui traite la vidéo toujours avec une sortie en MP4, et ensuite de reprendre celle-ci sur ADOBE PREMIERE ELEMENT. Pourquoi ADOBE ne prend pas la video d'origine qui pourtant en déja en MP4, censée prendre en charge ce logiciel....???
Si je n'obtient pas de réponse à cette demande je n'achèterai pas le produit car je le destine exclusivement à la suppression des publicités(et des parties d'émission antérieures et postérieures aux films) contenues dans les vidéos émanant de ADSL-TV. C'est ma seule et unique application. Je précise qu'il est très fastidieux de procéder comme actuellement avec de surcroit une déperdition de qualité du fait de ce double transcodage.
Je constate également qu'il ne m'est pas possible de contacter avant l'achat du produit le service technique d'ADOBE susceptible de me renseigner ce qui est fort désagréable...
Merci de votre réponse
Daniel92350

Error message when downloading Adobe Premiere Elements 11

When attempting to download the Adobe Premiere Elements 11 from the cd, I'm getting an error message that reads: "The installation process has encountered an error while installing Shared Technologies. Please restart your system and try again".I'm using a Windows 7 Operating System. When I attempt the download again, I get the same error message.

Curtis Baughman
Many of us have encounted this issue. The problem is not confined to a particular version or computer operating. Many homemade remedies and scientific ones have worked for some and not others. The most recent fix was offered by an ID by the name of Maud Barbara and seems to have been the answer for that user and at least one more.
Maud Barbara's fix can be found at the end of the very long thread on the subject found
http://forums.adobe.com/thread/1121947?start=40&tstart=0
The rough Google Translate went
Hello
I had the same problem as you and I just d have the solution:
go to C / program files (86) / common files/OOBE
Rename OOBE by OLDOOBE
and your problem is resolved
You can reinstall the software
What worked for me in this case was none of the above. How I and others navigated this installation problem is documented in the thread cited.
We look forward to your results to see what turned out to work for you.
Thanks.
ATR

No Disk Error for Adobe Premiere Elements 12

I installed Adobe Premiere Elements 12 to my PC. Everytime I load the software, I get this annoying alert saying that there is no disk located error. I can get it to go away if I click on try again a bunch of times, but I want to get rid of this problem. It should NOT be happening. SOME BODY TELL ME WHAT TO DO PLEEAASE!

Blue Mask
Please check out recent thread which sought to solve the disc error message that appears to be similar to what you are reporting
http://forums.adobe.com/message/6246049#6246049
There was no definitive answer. Still waiting for follow up to the latest line of questions in that thread.
Suggestions about this being a long time issue are a bit misleading. In versions of Premiere Elements earlier than 12, there was a SmartSound/Sonicfire Pro 5 feature which appeared to be linked to the disc error message. And, updating SmartSound/Sonicfire Pro 5 was claimed to be the cause and remedy for the disc error message.
http://forums.adobe.com/thread/1300410
However, SmartSound/Sonicfire Pro 5 is no longer a feature in Premiere Elements 12. Premiere Elements 12 does have a Music Score feature, similar in principle to SmartSound soundtracks, but the SmartSound feature is gone in version 12.
Please review that information in the link above and let us know if any of it works for you.
Thank you.
ATR

Problem with Adobe Premiere Elements 11

Hello
Need your advice .
Problem Description:
Adobe Premiere Elements 11 (BOX)
After adding any the timeline material ( pictures or music or video) , 2-3 seconds hanging.
Then closes without any notification.
This program gave me a friend, not for need. He used it to me.
By not knowing at first I installed a Pr, and then my friend temporarily deactivate the license .
In the "Help" menu is available only " Deactivate" ...
It is a problem with the activation or something else?
Hardware:
Operating system Windows XP 32bit sp3
3GB RAM
Processor Intel Q8300 ( 4 cores )
motherboard Asus P5P41TD
video card nVidia GT220 - Latest drivers
Direct X 9.0c
Software:
last QuickTime
microsoft visual c + + 2008 redistributable
microsoft visual c + + 2010 redistributable
net framework 4
net framework 3.5
net framework 3.5 language pack
k-lite codec pack full
Help please .

-What model of camcordder is your video coming from and what format and resolution is it?
I tried to add a video with the two devices.
Samsung HMX-H300
Video settings added to the project:
Video: MPEG4 Video (H264) 1280x720 50fps 12009kbps [V:
HMX-H300 [eng] (h264 main L4.1, yuv420p, 1280x720, 12009 kb / s)]
Audio: AAC 48000Hz stereo 127kbps [A:
HMX-H300 [eng] (aac, 48000 Hz, stereo, 127 kb / s)]
Used settings:
PAL-AVCHD-AVCHD LITE 720p50
The same thing happens and another video.
Sony DSC-H5
Video settings:
Video: MPEG1 Video 640x480 30fps 104857kbps [V: mpeg1video, yuv420p, 640x480, 104857 kb / s]
Audio: MPEG Audio 32000Hz mono 64kbps [A: mp2, 32000 Hz, mono, 64 kb / s]
Used settings:
DSLR-480p-DSLR 640x480p50
the same result.
-How did you get the video from this camcorder to your computer?
Files are copied to the flash card to the HDD.
-Have you ensured that a video clip from this camcorder is the first clip on your timeline so that the program can match its project settings to your video specs?
Yes. Video clip from this camcorder is the first clip in the timeline.
Parameters of the project and the video above.
-When your project settings match your video specs, you will NOT see a yellow orange line along the top of the timeline, above your video clips, in Expert mode. Is this the case with your project?
No. I suspect that the problem occurs in the video is displayed on the timeline.
Because the assets of the project and put the video thumbnail is displayed on this video.
at the time of the drop on the timeline displays only rectangular frame that meets the duration of the video itself. let go of the mouse button. Displays only the blue rectangle.
Thumbnails of the first and last frames do not appear. takes 2-3 seconds and Pr closed.
I believe that until you see the yellow line is not reached.
-Have you ensured that any photos you use are sized to no larger than 2000x1500 pixels in size?
Yes, size is not more than 2000x1500
- You're using a somewhat antiquated 32-bit operating system that can make limited use of your RAM load (which may explain why you only have 3 gigs of RAM), so you'll need to optimize your workflow by matching project settings to your video as closely as possible in order for the program to work effectively and stably.
yes, you're right. need to upgrade to 64bit. so I put 4GB of RAM, but I can not install 64bit Vindovs. no time. and available only 3.25 GB.
I would add, I hope it will help isolate the problem.
I've been tracking work in process monitor Pr. the very moment when it closes when you move the video on the timeline.
begins after the closing lines
Registry
RegOpenKey
HKLM\Software\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\ContentAnalysisData.dll
Before doing so, refer to
File System
C:\Documents and Settings\All Users\Application Data\Adobe\Premiere Elements\11.0\Online\DVD Templates\All_Lang\General\(A) Fun\it_IT_FUN_PAL_S_SM_OUTPUT_s_prv_sm.png
and the like ...
I turned drvatson. now the error appears as a window.
System disk, and on which stands Pr error checking. there are no errors.drive on which stands Pr error checking. There are no errors.

Adobe Premiere Elements 10 with Photoshop Elements 9

Is it possible to use both Adobe Premiere Elements 10 with Adobe Photoshop Elements 9?
I don't want to upgrade Adobe Photoshop Elements 9 because has not enought new functions but need new Premiere with Organizer.
Does Adobe Photoshop Elements 9 will work correctly with Organizer of Premiere 10?

Hi,
It is possible to use both of them, seperately though. If you wish to do use some interoperable feature, that wont be possible, since, as Steve said, they both use thier respective organizer.

Adobe Premiere Elements 9 has encountered a problem and needs to close.

Adobe Premiere Elements 9 has encountered a problem and needs to close. Asked to be debugged no response an then the program don not respond.
If i Run an old project direct from the file PE 9 it works and then go to a new project it works but from the start up it just closes down.
Bridge is also starting to do it

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Are you using an account with Administrator Privileges?
Run as Administrator http://forums.adobe.com/thread/969395 (Encore + "All" Premiere)
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Adobe Premiere Elements 11 - install on new computer

I have previously purchased Adobe Premiere Elements 11 and have the serial number available. How do I install it on a new computer using the serial number?

jzd
The important question is "Is this Premiere Elements 11 Mac or Windows?" If Mac, did you purchase it as the Adobe Premiere Elements 11 Editor from the Mac App Store?
If it is Premiere Elements 11 Windows or Premiere Elements 11 Mac from Adobe, then you can download installation files at this late date from the following web site and then insert your purchased serial number during installation.
http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
If you do decide to go this route, make sure that you read Note: Very Important Instructions on that web site page, otherwise you will run into an Access Denied message.
ATR

I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning

I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning but it never ends up doing anything. Please help me with this issue. I really need to get this project started like yesterday. Thank you.

dplum12
What computer operating system is your Premiere Elements 12 running on? Did you have the opportunity to update 12 to 12.1 Update yet using an opened project's Help Menu/Update? If not, please do so when you get the opportunity.
For now I will assume that your computer is Windows 7, 8, or 8.1 64 bit. Please try the following suggestions to overcome your Premiere Elements Sign In issue.
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
and, if you get any messages about Internet connect and the computer clock, please review the following
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
Please let us know the outcome.
Thank you.
ATR

I am trying to install Adobe premiere elements 8 on my new computer (Windows 7). The program ansvers with "the program not installed or can be damaged".

I am trying to install Adobe premiere elements 8 on my new computer (Windows 7). The program ansvers with "the program is not installed or can be damaged". Then aborts the installation.
It`s right, the program is not istalld, it is what i`m trying to do. And there is no problem whit the DVD. Any suggestions?

"Error 1303: Installer has insufficient privileges" or "Error 1304: Error writing to file" | Install | CS3, CS4, CS5 pro…
this link FIXED MY PROBLEM! i did the steps to the programdata\adobe folder and it installed FINE!

Après chargement d'adobe premiere elements 10 pb .

Similar Messages

Maybe you are looking for