Aproblem with db console

dear all
i have a serious problem with the restarting of a db console (ORACLE Enterprise mannager 10 g) the emctl file is some way un useful
plz if u have a copy of a running enterprise manager emctl file plz under redhat linux plz send it to [email protected]
THIS WILL BE SO KIND OF U
THANKS ALL

I think you can even use the Universal Installer (so maybe no need for the CD) to disinstall selectively a component and reinstall it. I did that with emctl once and it was quick and painless.
Launch Universall Installer and check the Installed Products - Browse to the emctl and disinstall it - then reinstalll it.
Note that chances are it will likely be assigned new ports.
Enrico

Similar Messages

Ihave aproblem with imessege my country is not listed

guys ihave aproblem with imessege my country is not listed so when i add one of my friends phone number without the country code and he call me his name shows but in the imessege ican just his numbers without the name but when i add the country code when they call me the numbers shows but without the country code number but in the imessege the name shows plz help me with this dilema becouse alot of people here having the same problem and ithink becouse you havent but our country code in the face time and in imesseges by the way my country is kuwait and the same problem is saudia arabia

It seems that this problem is happening everywhere not just Arabian gulf companies! I've done some research and I've seen posts and blogs complaining about the same issue.
I've spoken to apple care representatives and was escalated to a supervisor who advised that apple is well swear of the issue and that they expect an update with in one to two weeks from now that hopefully will address the problem.
Mean while, I've tried restoring twice but I've used the same update that I've downloaded from iTunes. Sadly no good results. However I've read somewhere two points:
1. That if you down load the iOS 5 manually from a different source and use that to RESTORE your device to iOS 5 that this will resolve the issue.
2. Some friend tell me that apple made a statement to their customers to wait at least one week before downloading and updating to iOS 5
Im going to try the two approaches and see what happens.
I'll keep guys posted ;)

Initializing with the console doesn't set indexes

Hi,
We want to change the basedn of a suffixe, from o=isp to o=Courrier,dc=domcomponent,dc=com. I exported my data using a db2ldif -U and modified my ldif with a sed. It seems that after I initialized my new suffixe with the console or the ldif2db.pl script, my indexes are not set. It takes many seconds (60) to receive the response of a basic ldapsearch. (e.g.:uid=tom) The db/Courrier/files has been generated during the initialization. After a reindex with the console (it takes 4 hours), the ldapsearch took 0 second to respond. How can I, index while initializing.
I'm running version Sun ONE 5.2 (Sun-ONE-Directory/5.2 B2003.143.0020)

Hi,
Ive experienced the same sort of problem, but have sorted it using either db2index or the console to re-index after initialisation.
According to the docs, re-initialisation should copy down indexes from the MAster server but this does not happen either.
Regards,
g8

Booting x86 with serial console by default

Let's say I have a x86 box with no monitor and no keyboard. I'd like to boot the x86 Solaris 10 installation dvd and have it booted with the 'serial console' option. However, it's not selected by default and I can't select it without using the keyboard.
Is it possible to have the x86 installation DVD boot with serial console support by default?

Well, https://wiki.archlinux.org/index.php/Re … nstall_ISO doesn't help, genisoimage created iso is still not bootable.
The iso created with Archiso boots but - it creates an x86_64 kernel only...
Last edited by piwwo (2013-06-14 13:55:31)

Nexus 1000V. problem when working with the console VMWare

I have a problem when working with the console VMWare.
Sometimes it is impossible to connect any of the hypervisor to the guest OS managed by them.
I get the message: "Unable connect to the MKS: Host address lookup for server <name of the hypervisor> failed: No such host is known."
This message always appears in conjunction with the reconfiguration of virtual switch: "Reconfigure vNetwork Distributed Switch .... Initiated by Cisco_Nexus_1000V_ ....."
Upon completion of the reconfiguration, Communication console, with guest OS is restored, or on its own or after a reboot srv-vc.
In this time, I do not see any message in Nexus 1000v log.
What is this?
Thanks in advance.

Smells of a DNS issue. Are you sure your ESX hosts are reachable from your client via DNS hostname? Try pinging them from a command prompt/terminal. You may have DNS server issues.
As a temp fix, edit your [windowspath]/system32/etc/drivers/hosts file and manually add the ESX host name and IP, then re-test.
Regards,
Robert

Problem creating mailing list with Server Console

Hi,
when I create a new mailing list, I do the following:
1. Right click on groups folder in Console
2. Choose New->Group
3. Entering all data and checking "Mail Account" under Account
The documentation sais, that a Mail-tab should now appear. But this is not the case for me!?
I can only create the group like this and have to add the attribute "mail" - to enter an email address - manually..
Is this normal? Am I doing something wrong or missing something? Also disallowing posting on this group can only be set manually. Shouldnt all this be done using a nice GUI dialog?
I'm using Directory Server 5.2 Patch 2. Also tried 5.2 Patch 4. Both same problem.
Thanks in advance
david

got the instructions from the "Sun Java System Messaging Server 6 2005Q4 Administration Guide", chapter "Managing Mail Users and Mailing Lists with the Console Interface"-"Managing Mailing Lists":
http://docs.sun.com/app/docs/doc/819-2650/6n4u4du0e?q=messaging+server&s=t&a=view
Step 6 sais: "Click the Mail Account box. -> The Mail tab becomes visible in the Create Group window."
Thanks,
--David

DPM console not connecting . Error- Cannot connect to Data Protection Manager. This version of DPM is not supported with Central Console Client (ID : 33345) DPM console not connecting

I am having problem connecting the DPM console to ther server. It gives me following error -
"Cannot connect to Data Protection Manager. This version of DPM is not supported with Central Console Client (ID : 33345)"
The server is DPM R2 and the same console is working on one other computer.
Any idea how to solve the problem?
Thanks

Hi
Please make sure you have both versions of Microsoft Visual C++ 2008 Redistributable installed..
Also make sure you have .netframework 2 installed. If you look at the dpm logs it should say what is missing.

Booting with mode CLI and not with the console.

hi,
On a SF300-08, is anybody knows how to work with CLI and not with the Console Menu Interface ?
Thank you for your help.
Pascal Linglin

Hi Pascal.
Firstly make sure your switch is using the most recent firmware, which is now as of yesterday 1.1.2.0 .
When that firmware is running on the switch, a textview CLI option should be seen on the main menu as per the following screen capture;
to get back to the menu, just type menu from the cli interface.
Hope i answered your question?
regards Dave

How To grant Permission on Filter with a Console (not with MaxL)

Hello,
i am new to V11.1.2.1 (in V9 we use Essbase standalone mode and move to Shared Services security mode in V11)
With MaxL i can do a "gant filter MyApp.MyDB.Myfilter to MyexternalUser;"
now i want to do this with Shared Services Console (or with Essbase Administration Web Console).
With the EAS Web Console i can create the MyApp.MyDB.Myfilter.
With Shared Services Console i can give MyexteralUser the permission "Filter" for the Essbase App "MyApp".
But i found no way to grant the Myfilter to MyexternalUser.
What are the steps (other than user MaxL) to do this with a console app ?

Take a look at this thread, 4th post:
http://www.network54.com/Forum/58296/thread/1300291022/hiding+level+0+dummy+members+with+filters
Regards,
Cameron Lackpour
P.S. I think it's odd that this isn't documented anywhere particularly well. Has anyone seen it/have I just been my usual totally blind self?

OIM 9.1 Time-out problem with Design Console

If I leave the design console running for any length of time, making updates result in the following error:
17:36:52,578 ERROR [ACCOUNTMANAGEMENT] Class/Method: tcDataBase/getUser encounter some problems: Invalid user found: xelsysadm
java.lang.RuntimeException: Invalid user found: xelsysadm
at com.thortech.xl.server.tcDataBase.getUser(Unknown Source)
at com.thortech.xl.dataobj.tcSVP.isOperationAllowed(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.isUpdatePermissible(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPreUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcSVP.eventPreUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source) ...
Closing the Design Console and re-launching produces similar errors. I must stop and restart the JBOSS server to get access again. My environment is Windows 2003 with JBOSS and an 11g database.
Any help on what to look for would be appreciated.
KC

You are correct. If you pre-populate, it will be the requester. The requester would need to manually populate the field during the request with the requestee information. And there is only one form available. You can however, after submission of the request, get the request data, parse the Consolidated Request Data to determine the id's in the request field, and then return appropriate responses to trigger the tasks needed. This will still be a problem in the long run because you can't change the requestee information for each approval task. You're pretty much out of luck on this one.
-Kevin

Problem with admin console

Hai Folks,
I have installed Weblogic8.1 SP5.I have created mydomain with user name,password,and all other portdetails host.
When I start server it is running properly with out any errors..the out put window shows the below message..
Starting weblogicserver with Java HotSpot(TM) Client VM Version 1.4.2_0
Inc.>
2006 11:14:55 AM CDT> <Info> <Configuration Manageme
r is being started as the administration server.>
2006 11:14:55 AM CDT> <Info> <Management> <BEA-14110
8.1 SP5 Mon Sep 19 23:06:54 PDT 2005 641358
XMLX Module 8.1 SP5 Mon Sep 19 23:06:54 PDT 2005 6
2006 11:14:56 AM CDT> <Notice> <Management> <BEA-140
ration from configuration repository at C:\bea\user_
config.xml.>
2006 11:14:59 AM CDT> <Notice> <Log Management> <BEA
e C:\bea\user_projects\domains\mydomain\myserver\mys
ver side log events will be written to this file.>
2006 11:15:02 AM CDT> <Notice> <Security> <BEA-09008
ing security realm myrealm.>
2006 11:15:03 AM CDT> <Notice> <WebLogicServer> <BEA
Admin Server "myserver" for domain "mydomain">
2006 11:15:11 AM CDT> <Notice> <WebLogicServer> <BEA
dmin Server "myserver" for domain "mydomain" running
2006 11:15:11 AM CDT> <Notice> <WebLogicServer> <BEA
RUNNING mode>
2006 11:15:11 AM CDT> <Notice> <WebLogicServer> <BEA
ad.Default" listening on port 7001, ip address *.*>
But when i try to open admin console through browser giving the url as
http://localhost:7001/console the page is not displaying its giving page not found error.I tried it again by restarting the system,but again the same problem..Please help me regarding this problem.
Thanks,
Sai

mmm, it could be CPU, it could be a network-related issue... are you using multicast or unicast?
can you reproduce the issue?
if yes, can you run "top" to verify the CPU usage,
and do a thread dump on the admin server?
or at that point the box is entirely unresponsive?
in that case, running a scripts which periodically does a thread dump, and running top to sample every 10 seconds, could help...
jm2c

Slim, a problem with virtual consoles and a question about reboot

hi, just installed slim but now when I switch to the virtual consoles my session on X starts firing keyboard events on the consoles I have there, how can I fix that?
I'm using xmonad, my terminal is sakura and I'm starting slim from /etc/inittab and xmonad from ~/.xinitrc
also, it seems slim uses special usernames to halt and reboot however those ask me for the root password, is there a way to avoid that?
thanks all.
Last edited by Samus_ (2008-11-23 18:19:49)

Samus_ wrote:hi, just installed slim but now when I switch to the virtual consoles my session on X starts firing keyboard events on the consoles I have there, how can I fix that?
this http://developer.berlios.de/bugs/?func= … up_id=2663 might be related. out of curiosity, why are you starting slim from /etc/inittab and not as a daemon in /etc/rc.conf?
Samus_ wrote:also, it seems slim uses special usernames to halt and reboot however those ask me for the root password, is there a way to avoid that?
the flippant answer is, "yes, fix slim." but so as not to be a jerk, 'man slim' turns up this:
The 'halt' and 'reboot' commands need the root password, this may change in future releases.
so i was about to say, "no." then i decided to hit google with 'slim "special usernames" password'. unfortunately, your post here is the fourth result, so no love there.
*but* there's this:
http://developer.berlios.de/bugs/?func= … up_id=2663
and this:
http://developer.berlios.de/patch/?func … up_id=2663
and the abs.
so if you really want it, read the wiki page on the abs, add the patch to the pkgbuild, makepkg, and pacman -U. if you don't want pacman to replace your patched version when there's an update, add slim to the IgnorePkg line in /etc/pacman.conf. you'll have to re-makepkg and re-pacman -U whenever there's an update, but it ain't that hard.
if it works, i might like a copy of yr pkgbuild. hth!

Upgrading to PT 8.49.14 - PermGen problem with weblogic console

All Peoplesoft domain Comes you fine in our env setup (Admin, PIA1, and PIA2).
When we try to bring up the console, we're able to get the initial signon screen.
We enter the account and password, hit the signon button, and it never comes back.
The log ends up showing a PermGen error:
hrdmo@peo1asdv-z1:/psa1asdv/apps/hrdmo/hr890/webserv/hrdmo/servers/WebLo
gicAdmin/logs> more WebLogicAdmin_stderr.log
Exception in thread "VDE Replication Thread" java.lang.OutOfMemoryError:
PermGen space
Exception in thread "[STANDBY] ExecuteThread: '6' for queue:
'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError:
PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '0' for queue:
'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError:
PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '7' for queue:
'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError:
PermGen space
Changed Java heap from Solution:
from:
JAVA_OPTIONS_SOLARIS="-server -Xms512m -Xmx512m -XX:MaxPermSize=256m
-Dtoplink.xml.platform=oracle.toplink.platform.xml.jaxp.JAXPPlatform"
To:
JAVA_OPTIONS_SOLARIS="-server -Xms1024m -Xmx1024m -XX:MaxPermSize=256m
-Dtoplink.xml.platform=oracle.toplink.platform.xml.jaxp.JAXPPlatform"
Changed the adminserver:
from:
JAVA_OPTIONS_ADMINSERVER="-Xms256m -Xmx1024m"
to:
JAVA_OPTIONS_ADMINSERVER="-Xms1024m -Xmx1024m"
still getting PermGen space error, any thoughts?
Env setup: Solaris 10, WLS 92 MP3 patch1, PTools 849.14
Thanks

Increasing PermGen size doesn't solve problem at all. Source of the problem is related with class loader. After you web app is undeployed class loader can not unload all classes from PermGen memory. This leads to extra memory consumption after every undeploy, deploy cycle. Make sure every class can be released and undeployed after undeploy.
Regards
Remis B
Remigijus Bauzys
Java EE freelancer
IT Consultant.

Not able to connect with xm console

Oracle VM server release 3.1.1
Hypervisor running in 64 bit mode with Hardware Virtualization support.
Hello All-
I am using VM 3.1.1 and while trying to connect xm console #, getting below. I can connect using OVM console/VNC option. But xm console always gives below error for all the virtual machines.
[root@ovs ~]# xm list
Name ID Mem VCPUs State Time(s)
0004fb0000060000116ceee73ef79c84 2 4096 2 -b---- 21.3
0004fb00000600001f96fd5ece5ea463 3 4096 2 -b---- 133.3
Domain-0 0 814 4 r----- 280.9
root@ovs ~]# xm console 2
xenconsole: Could not read tty from store: No such file or directory
I hint to diagnose and resolve the issue will be appreciated.
Regards,
Js
###### Log output from last qemu-dm-.............log
Using file /OVS/Repositories/0004fb0000030000a3529151cc87155a/VirtualDisks/0004fb0000120000fa9effa32c9cdf48.img in read-write mode
Watching /local/domain/0/device-model/3/logdirty/cmd
Watching /local/domain/0/device-model/3/command
Watching /local/domain/3/cpu
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 0004fb00-0006-0000-1f96-fd5ece5ea463
Time offset set 0
char device redirected to /dev/pts/3
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/3/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/0004fb00-0006-0000-1f96-fd5ece5ea463/vncpasswd.
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
vcpu-set: watch node error.
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xs_read(/local/domain/3/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/3/log-throttling'
medium change watch on `/local/domain/3/log-throttling' - unknown device, ignored
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
cirrus vga map change while on lfb mode
mapping vram to f0000000 - f0400000
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
Unknown PV product 3 loaded in guest
PV driver build 1
region type 1 at [c100,c200).
region type 0 at [f3001000,f3001100).
squash iomem [f3001000, f3001100).
region type 1 at [c200,c300).
region type 0 at [f3001100,f3001200).
squash iomem [f3001100, f3001200).
[root@ovs xen]#
############################

All-
Any hint on the solution will be appreciated !
Thanks

Problem with amadmin console

i am deploying my own portlet using the pddeploy command with amadmin as login.
it is also allowing me to create new channel using the identity server.
But when i am trying to login on portal server desktop as amadmin it gives me error as confoguration error.
You are not having access rights.

Hello Delali97,
Both the console and the script you mentioned seems tell us you have a question more related to programming or anything else. This is not related to Visual Studio Setup and Installation forum. That is forum talks about Visual Studio Installation.
Please reopen your post to a related forum or you can post back and clarify your project details so that we will give you a direction.
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Aproblem with db console

Similar Messages

Maybe you are looking for