[apvlv] mouse scrolling doesn't work anymore

Hello guys,
it occured with some newer version of apvlv that mouse scrolling isn't working anymore. Is there any chance to activate that feature again?
Best regards

Hmm It sounds like a problem with apvlv. Does another mouse work with it? Email one or both of these telling them the problem:
[email protected]
[email protected]

Similar Messages

Mouse Scroll doesn't work somtimes only in firefox

My mouse scroll stop working in firefox after a few minutes of surfing on the internet, on other browsers or software programs I do not have this problem ! When I close and reopen firefox the scroll function works again a few minutes..
I removed and reinstall firefor without result.
Thanks for helping me

I apologize in advance if you receive multiple replies from me - I'm dealing with this problem so it might take a couple of shots at it :^)
gclauwaert:
I just posted something similar today (user: cispang, date: 12/14/2011, subj: "Firefox frequently loses almost all navigation..."). When this occurs to me, I also lose the use of the page up/down keys and the arrow up/down keys, but I am able to drag the scroll bar up and down to navigate the page. When you have a chance, could you read my post to see if you have the same set of conditions, and post a reply to my post?
Thanks,
cispang

Magic Mouse - scrolling doesn't work on some web pages

The scroll function on my Magic Mouse isn't working on some web pages. The main ones it struggles with are news sites (e.g. The Telegraph), or things that regularly update (e.g. BBC Sport live commentaries). When this is a problem the page won't scroll at all, even if you enable the scroll bars at the side of the page and try to drag manually. The majority of web pages do work however. Thoughts?

Hello Halifax:
Are you really running OS X 10.3?
These are the requirements for a magic mouse:
Minimum Requirements
A Bluetooth-enabled Macintosh computer
Mac OS X v10.5.8 or later with Wireless Mouse Software Update 1.0* or Mac OS X v10.6.1 or later >with Wireless Mouse Software Update 1.0
Barry

Mouse clicks, scrolling doesn't work in applications from start screen (let's call it "tile application")

Hello!
I need help.
2 days ago the mouse worked fine. Yesterday I noticed that the mouse scroll does not work in the "Book Bazaar Reader". Now I found that the right mouse button and left mouse button does not work in some applications, but scrolling work in these applications.
In mail application clicks work in some panels, scrolling doesn't work.
In desktop mode, the mouse works perfectly.
Please help!

Hi
Since at desktop mode everything fine, i suspected some application or 3rd party SW change your mouse setting
Go to run, msconfig, run as administrator, within the System Configuration dialogue box find startup tab, find KHALMNPR (if you using logitec mouse) and uncheck it
click ok and restart
or try to do clean boot to eliminate 3rd party SW issue

BAD TV effect doesn't work anymore.

Hi friends.
My BAD TV effect in Final Cut Pro X (release nr. 10.1.3) on my iMac (iOS 10.9.5 Intel Core 2 Duo 3.33 GHz, 6 GB ram ddr3, 1 TB hd) doesn't work anymore.
Clicking a clip and then moving the mouse over the effect does't make it previewing the effect; applying the effect results in a black clip in the Viewer.
It's the only effect not working.
Anyone knows how to solve this problem?
Thanks in advance.

Project is 1280 x 720 at 50 fps.
Media Spec are 1280 x 720 at 59,94 fps (Gopro) and 1920 x 1080 25 fps with a photographic camera (don't know name and model, it's of a friend of mine).
I tried the effect on both media specs. And... sometimes in preview mode (media selected, scroll on effect) it works, but when applied the clip goes completely black. If I uncheck the effect, clip works ok.
It's like FPCX could not render the clip...

IMac freezes & Time Machine doesn't work anymore

Hello,
For several days now my trusty iMac (two years old) keeps freezing without a recognizable pattern. Programs like iTunes, iPhoto or maybe even the Finder just stop working and display only the rotating ball - the only thing left to do for me after that is to manually terminate that process or (in the case of the Finder) to restart the whole iMac. I'm really clueless as to where this behaviour suddenly comes from, up until about a week ago the iMac worked perfectly. And now something like this happens every single time I start it.
Another thing that doesn't work anymore is Time Machine. My last automatic backup is from September 17th. After that it just stopped working. Every time an automatic or manual backup is initiated it just says "Searching for backup volume" but doesn't find it, even after several hours of looking. The Time Capsule itself works perfectly, no errors whatsoever.
My iMac is up-to-date, I also already ran the disgnostics of the hard drive program - everything seems to be fine. Can anyone help me?
Thank you in advance,
Paul

When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Horizontal scroll doesn't work.

I have recently updated to the Firefox 5. After update my A4Tech X6 mouse horizontal scroll doesn't work in Firefox, but at the same time it works fine in other applications. I had no such problems with scrolling in Firefox 3.6.*. Please help me.

sticksen,
I'm glad that it is user specific. Now I only know of one file you are going to need to remove to fix this problem, but keep in mind some basic setting in other programs are going to be rest by the removal of this file, you will just have to change them back when you run across them. Example in My Mail program I had to turn of the show thread feature again.
Ok here is what you have to due in order to delete the file. First off close all running programs including (System Preferences) but excluding (Safari). you will be perfectly fine having it running. The file is a hidden file so you need to show the hidden files on your computer to do so open (Terminal) and type in exactly as follows:
defaults write com.apple.finder AppleShowAllFiles TRUE
Hit return and then follow it by typing:
killall Finder
Hit return finder will reset and all you hidden files with show, after which Open finder and go into (Your User Name)/(Library)/(Preferences) and find the file named (.GlobalPreferenes.plist) and Delete it. Don't do anything after you delete this file just log out. Now log back in open Terminal and type exactly as follows:
defaults write com.apple.finder AppleShowAllFiles FALSE
killall Finder
Now test to see if you can scroll horizontally. And just for your comfort I did this myself after disabling the Horizontal scroll and it toggles it back on. (I have a white macbook not the new unibody macbook).
Do note that Mac keeps all settings files in (.plist)s and by removing them in your user folder will not harm your computer or the stability of your mac. These files are there just to hold settings files so that your experience can be the most pleasing for you.
Hope that helps.

The touchpad scroll doesn't work in visual studio?

Hello,
As I mentioned in the title, the touchpad scroll doesn't work or affect visual studio community. The scrolling works very well with other software but it doesn't with visual studio community. This same button worked with VS 2010, VS 2012 (It stopped sometimes
but still functioning correctly most of the time), and stopped with 2013 versions. Why?
Take a look at the video to see the problem in action: http://youtu.be/Qt20pM6ZQAo
Thank you for your comments!

Scroll button on what? Are you using a mouse with a scroll wheel, or is this a laptop touch pad?
If the latter, please read here:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/295553a2-80c0-4608-8b57-32c0422de3d4/visual-studio-2013-community-touchpad-scroll-doesnt-work?forum=visualstudiogeneral

Choosing start volume with [alt] doesn't work anymore

Hi there,
On my MBP (15" early 2011). Normally I can choose from what volume I want to boot by pressing the [alt] key right after switching on my MBP. I have OSX Snow Leo and Win7 (64bit) installed.
However since I installed the latest software updates several days ago, including a firmware update for the thunderbolt connection, the choosing of the start volume by pressing [alt] on startup doesn't work anymore: I can move the mouse, but the two volumes don't appear on the screen. All I can do is to switch off. I can however boot under both, OSX and Win7 by choosing the "restart under Win7/OSX" option in the other system respectively.
I now found out, that it works perfectly fine again when I have my 27" Apple Cinema display (mini display, not thunderbolt) connected to my MBP. When it's not connected I am having the issue.
My guess is that the thunderbolt firmware update causes this.
Anyone got an idea? It's quite a pain in the *** that I always have to start one system at first to get in the other one at the moment.
Thx

Hi Fortuny,
thx for your answer! I just have reseted this NVRAM as described in the support page, and think I have done it right. It worked as said there, I just didn't have to set any time or resolution things afterwards, as it is written there that it might have to be.
Sadly it didn't seem to help. Anyway, I do have news:
When the two volumes didn't appear again on the startup screen, I sat back and thought about what the issue could be. After approximately one minute starin on the screen, suddenly the two volumes appeared! So in fact it DOES work, just it takes about a minute now when I don't have the cinema display attached.
Does this additional info say anything to the experts out there? It's still not solved, as it is rather inconvenient to wait a minute untill I can choose the startup volume.
Thx for any sugestions!

Auto-scrolling doesn't work when JFrame is not visible

Hi, I have auto-scrolling implemented for my JTextPane that sits in JScrollPane - which lives in JInternalFrame. It works as excepted - as long as my application's JFrame is visible. When the JFrame becomes invisible, auto-scrolling simply doesn't work anymore.
I've overcame this by scrolling down in "windowShown", but it's ugly because the user can visually see the scroll down when using this workaround (it jumps).
I guess this is Swing's optimization, but I would really like to overcome it in someway. But it seems I'm not enough a swing hacker to do it.
One thing to note is thtat, the auto-scrolling works fine when the JInternalFrame is NOT visible, but frame is.
I've tried to override the isShowing-method of JInternalFrame, with no luck.
Here's my scrolling method:
public static void scrollDown(JScrollPane scroll) {
          JViewport port = scroll.getViewport();
          Rectangle rect = new Rectangle(0, port.getViewSize().height, 1, 1);
          port.scrollRectToVisible(rect);
          JScrollBar bar = scroll.getVerticalScrollBar();
          bar.setValue(bar.getMaximum() - bar.getModel().getExtent());
     }Anyone have ideas?

At some point I had really hard time getting the auto-scrolling to work, as I got these weird little bumps after scrolling down.
Adding scrollBar.setValue() seemed to 'just fix it'. It actually seems to be superfluous now.
The scrolling is already wrapped in SwingUtilities.invokeLater() - in conjuction with printing text into the JTextPane and it works OK.
I had some wrong info in the first post, the viewport actually does get scrolled down even when the JFrame is not visible. And by visible I mean JFrame.setVisible(false) - my application has a minimize-to-tray feature, which hides the JFrame.
So I think the problem is 'just' a repainting problem. When the frame is shown, the previous scroll location is first displayed, and then a repaint is triggered that causes the 'jump down'.
I'm not still sure how to fix it though.

Touch Pad of Satellite P50-A-M13 doesn't work anymore - Solution

Hello *,
before someone should have the same problem, I wanted to share my problem and my solution here:
Information about my system:
I have installed Windows 8.1 Professional and Scientific Linux 6.5 in Dual Boot on my Toshiba Satellite P50-A-M13.
_*Problem:*_
The Touch Pad suddenly doesn't work below Windows 8.1 Professional anymore, the mouse pointer vanishes after a reboot. You can't deactivate/activate the Touch Pad with the F5 key (without pressing the FN-button) anymore. The white LED of the Touch Pad doesn't work anymore. Another operating system (in my case: Scientific Linux) in Dual Boot doesn't recognize the Touch Pad anymore after a reboot, too. So it isn't working below the other operating system anymore, too. It looks like a hardware defect since it affects more than one operating system.
_*Additional information:*_
If you attach an external USB mouse to your Toshiba notebook, the Touch Pad will work again, you can activate/deactivate the Touch Pad via the F5 key (without pressing the FN-button) below Windows 8.1 again, but the white LED of the Touch Pad still doesn't work and doesn't turn off or on. Same below another operating system in Dual Boot. The BIOS doesn't offer a feature that you can activate or deactivate the Touch Pad there.
Reason:
I had the problem that the feature "automatic driver installation" below Windows 8.1 Professional was activated. The driver for the Synaptic Touch Pad got replaced by a Microsoft driver in the background automatically.
_*Solution:*_
_Keep the external USB mouse attached and start Windows 8.1 if it isn't started already. Then deactivate feature "automatic driver installation" below Windows 8.1. Then reinstall the Synaptic Touch Pad driver from the download page of Toshiba website again. Then reboot Windows. The Touch Pad should work then again. And never, never activate the feature "automatic driver installation" below Windows 8.1 again!_
Many thanks, Jana

Thanks Jana for this post!
I also noticed that sometimes Windows updates could break the driver functionality...

Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore. What settings should my computer be on and what settings should my tv be on?

Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore. What settings should my computer be on and what settings should my tv be on?

TarahCurrie Sep 10, 2014 3:48 PM
Restore From Time Machine Backup
Reinstall OS X
Get Help Online
Disk Utility
MacBook Pro, Mac OS X (10.5.8)
You are running 10.5.8
Did you try booting off your Install disk holding the c key down. From here you can get to the drop down menu just a few clicks in (you are not going to install) and run the Disk Utility>Repair Disk. See if it will let you do this.

Efi Express doesn't work anymore so I can't print

I Use Efi Express as RIP and colormanagement software to print to my Epson Pro 4900 printer. Now I need prints and this doesn't work anymore.
I installed Maverick so that is most likely to be the problem, because just before I did this the pritner and software worked fine. I installed Efi Express again but I keep getting a message aboutr a system extension that isn't properly installed.
I looked in the system folder for this .kext file, but it doesn't exist at all.
Please help.

We use the Fiery Express driver with our Canon copiers that use the optional EFI print controller and have no issue with this driver on 10.9. In fact, at this point in time, it is the only EFI driver we have for 10.9.
The Express driver plugins should be located in /Library/Printers/efi and the PPD will be in /Library/Printers/PPDs/Contents/Resources/en.lproj and is called Fiery Express. So trash these files and check the EFI web site for the latest version of the driver.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues. I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?

Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck!

Su doesn't work anymore but sudo works

Hi all,
I normally use my standard user account but when I'm installing with macports I routinely "su" into root to do things.
Today I went on my machine and noticed that "su" wouldn't work. Before anyone decides to tell me that I don't need to use "su", I realize that but I use it for my own purposes.
From the system log I am seeing this each time "su" fails:
su[1376]: pam_authenticate: Permission denied
What is interesting is that doing a "sudo su" works, and I'm able to do all of my admin duties that way.
I have a feeling something messed up my bash profile but not totally sure. Has anyone else run into this issue?

Hi all,
Thanks for the help on this issue.
I'll clarify: I'm using this install as a server and this is why I have 2 admin accounts on it. The original account is my own; the one I created when I first installed OS X. I then enabled System Admin (root) so that is the other admin account. After installing MacPorts I have been running the system as a multi-user webserver. I occasionally log in as root to do maintenance and upgrades. I have found that it's easier to use the SysAdmin account in certain situations because of permissions issues and ease of installing upgrades.
I'll often log in under my username and then su to root. Recently (yesterday) I noticed that "su" didn't work anymore when I used my normal username.
There are sometimes that I will log onto the machine as System Admin and usually via the terminal (console) I can log in as any of the other accounts by doing
su <username>
this also doesn't work anymore. I get the error:
shell-init: error retrieving current directory: getcwd: cannot access parent directories: Permission denied
I have two servers set up this way. One works the way it should, the other one has this problem. The only difference I can see is in roots bash profile but I'm not sure why they are different on each machine.
Also when logged in as System Admin, I should be able to turn off "allow user to administer computer" on my regular account but it's grayed out. On the other similarly configured machine, under the same conditions, I can. I'm not sure why I can do it on one and not the other.
I've tried turning off enable root via Directory Utility but that didn't fix the issue.

[apvlv] mouse scrolling doesn't work anymore

Similar Messages

Maybe you are looking for