AQ-Adapter (Interconnect) do not publish

Hello,
I want to use the AQ-Adapter to publish some events. I model the process in iStudio and configured the adapter. The adapter starts successfully and created a reader to my outbound_queue (which means the adapter knows my schema, could connect and knows my queue). Now I enqueue some messages into the outbound_queue but the adapter does nothing. The adapter did not publish an event. The messages are still in my outbound_queue. Anybody know this problem?
best regards,
Colette

Did you create a subscribe on the published event ?
I noticed that when there is no subscribe on the same event, the adapter will not pick up the message from the queue.
I thought this only goes for the AQ-adapter.
The adapter also will do nothing when you don't appoint a queue. But you already said you did.
Hope this helps
Herman Suijs
www.whitehorses.nl

Similar Messages

Ical not publishing to dotmac--new information

Hello, I have been having a hard time with icalendar not publishing on dotmac. It started happening suddenly on my upgrade to 10.5.2.
The dotmac support people have been responding to my inquiries with the following suggestions (eached bumped to a higher level):
1) unpublish and republish--nope doesn't work
2) corrupted file, remake the calendar (which means re enter every entry)
3) the most recent is that my file size (1.9 mbytes) can't be published on ical.
Has anyone heard this before? It is news to me, and google and forum searches have not indication of a limit to ical file sizes for dotmac publication.
Now it seems my choices are:
1) Try to find a way to bulk delete old events (there have been some messed up syncs with missing sync that have created a lot of repeated events). There are literally thousands of individual events that have to be deleted over the 5 years I have been using ical.
2) Re enter my dates in a new calendar going forward and publish that new calendar. Frankly, that seems easiest, but I have to admit being peeved at the undocumented file limit.
It is not a matter of my idisk size or anything like that. According to the tech " and can see that it has a file size of 2 MB. I'm sorry, but your calendar is too large to be rendered on a web browser. iCal publishing is intended primarily for personal use, and not as a means of publishing such a large and complex schedule.
I'm very sorry for any inconvenience this may cause. To decrease the size and complexity of your calendars, you might consider decreasing the event repetition, or splitting the events from one calendar into several smaller calendars."
So, anyone have any pointers?

I'm also having this problem. Lots of things seem to be broken in 10.5.5. I see that iCal last published my calendar in August 2008. Spotlight no longer seems to be indexing iPhoto. I wonder what else doesn't work. Most aggravating is that Apple never seems to acknowledge these problems. As mysteriously as they came, they might go away. It just works => That's just the way it works!

Error in file receiver adapter (Directory does not exist / cannot be create

I have a NFS reiceiver file NFS adapter with target directory:
10.128.68.38\arbo2000\UploadPinfos\arbodev
if I run this line in windows, windows access to this folder.
Full Error log:
Receiver Adapter v2123 for Party '', Service 'BS_0000_ARBO_DEV':
Configured at 2006-04-06 18:08:26 CEST
History:
- 2006-04-06 18:08:35 CEST: Error: Message processing failed: Exception: Message processing failed - configuration error in file receiver adapter (Directory does not exist / cannot be created)
Can somebody help me please??

Hi Alvaro,
If your XI server is running on Unix platform then you'll get the access only after mounting 10.128.68.38 this system as a drive. This is equivalent to the windows network mapping.
Next thing is that once that is done then you can access the path /arbo2000/UploadPinfos/arbodev by mentioning it in your directory path.
To check whether the above mentioned is the problem then pls do try by doing it with FTP protocol. If it works then for acting as a local directory for NFS you need to mount the drive.
Cheers
JK

When using Parallels for Windows 7, I cannot connect to Wi-Fi. I get drop down menu "Real Network Adapter Thunderbolt Bridge used by Virtual Adapter 1 is not connected to the network". How do I fix?

When I try to connect to internet wirelessly (Parallels/Windows 7 on my Mac Pro) I get a drop down that says "Real Network adapter thunderbolt bridge used by virtual adapter 1 is not connected to the network". I can not figure out how to connect - any help is appreciated!

Since you are having trouble with Parallels or Windows, did you ask in their respective support forums? If not, you might want to consider doing so.

Error in AS2 adapter. Object not found in lookup of as2.. Its urgent..!!

Hi AS2 experts,
*When i tried sending an xml to partner system using AS2 adapter.. Mapping is succesfull and message is failing in receiver AS2 adapter.
1. I used the following parameters in AS2 Module.
ModuleName                                                       Module Key
localejbs/Seeburger/solution/as2                              solutionid
localejbs/ModuleProcessorExitBean                          exit
ModuleKey    ParameterName         ParameterValue
exit                JNDIName     deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
Iam getting the following error.
Success     MP: Processing local module localejbs/Seeburger/solution/as2
Error :   MP: Exception caught with cause com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2.
Error : Exception caught by adapter framework: Object not found in lookup of as2.
Error : Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of as2.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2..
2. When i tried by removing Modulename "localejbs/Seeburger/solution/as2"
It is showing the below error like AS2ID is missing.. but its there in party configuration.
Error :
Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing..
Can anyone has idea what might be wrong.
Kindly suggest me asap.
Thank You.
Regards
Seema.

Hi,
Plesae go through below links
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
and
Check with below configuration
Configuration for AS2 or simple file adapter.
We are using this module configuration for converting EDI D96A format to XML:
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
bic destSourceMsg MainDocument
bic destTargetMsg MainDocument
bic logAttID ConverterLog
bic mappingName See_E2X_ORDERS_UN_D96A
bic saveSourceMsg ORIGINAL_EDI
can someone please tell me the module configuration for reverse mapping at receiver end,i.e.,XML to EDI D96A
basically,I need mapping name for this.
Scheme=AS2ID
Name = WAN network no of the partner who is sending the file
Sender AS2 adapter configuration:
Few changes in the module parameter tab.
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_E2X_EDIFACT_ORDERS_UN_D93A which does the conversion of EDI-XML.
Receiver AS2 adapter configuration:
When the adapter is used in a receiver channel, it obtains a message from the Integration Engine and sends it to a business partner. In this case, the following steps are required:
1. Define the channel as a Receiver channel on the Parameters tab
2. The last step ensures the module sequence is complete:
Make sure the module ModuleProcessorExitBean does exist in the module sequence:
Module Name=localejbs/ModuleProcessorExitBean
Type=L
Module Key=Exit
with the following module parameter:
Module Key=Exit
Parameter Name=JNDIName
Parameter Value=deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
File receiver:
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_X2E_EDIFACT_ORDERS_UN_D93A
ONly the mapping program name changes from E2X to X2E. IN ur case it will be See_X2E_ORDERS_UN_D96A
Thanks
Swarup

EJB adapter errors are not catched by the composite fault handler

Hi,
I got a serious problem in soa suite 11g ps3 that ejb adapter failures are not catched by the soa suite fault framework.
for example when I do a persist of an entity on a EJB session bean and I dont provide all required fields I get a rollback error when the BPEL component is finished.
Instance ID bpel:142089
The transaction was rolled back. The work performed for bpel instance "142089" was rolled back, but the audit trail has been saved for this instance
Error Code: 1400
Call: INSERT INTO INFORMATIELEVERINGEN (ID, DATUM_BEWAREN_TOT, BEWAARTERMIJN_IN_DAGEN, GEBRUIKER, ADRES_WAARNAAR_VERSTUURD, OUTPUTPRODUCT_TYPE, INTERMEDIAIR_PRODUKT, INHOUD_VERSTREKKING, RIN_ID, DETAIL_3, DETAIL_1, DETAIL_2, KETEN_OBJECT_TYPE, ORG_ID, TIG_ID, DATUM_SAMENSTELLING, KETEN_OBJECT_ID) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
bind => [314, null, null, null, test, null, null, null, null, null, null, null, null, 1, 1, 2011-09-27, 42]
Query: InsertObjectQuery([email protected])
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
ORABPEL-05002
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the reported exception is: Error committing transaction:; nested exception is: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.1.2.v20101206-r8635): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLIntegrityConstraintViolationException: ORA-01400: cannot insert NULL into ("VSG"."INFORMATIELEVERINGEN"."OUTPUTPRODUCT_TYPE")
what I did is to set idemponent = false on the partnerlink but then the invoke fails instead of the bpel ( same error ) and still no compensate or catch in bpel.
Added the fault policies to the composite and rethrowed the error to BPEL. Still no luck.
But then replaced the EJB adapter with the db adapter which does the same insert as the EJB and I got a nice bpelx:bindingFault which I can catch and handle.
thanks

Here is the total error message
[2011-09-29T19:33:28.316+02:00] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.dispatch] [tid: orabpel.invoke.pool-4.thread-3] [userId: <anonymous>] [ecid: 4af4f9da03d6b2c4:-1e444ff3:132b61dbaea:-8000-0000000000000312,0:1:100000005] [APP: soa-infra] failed to handle message[[
java.sql.SQLIntegrityConstraintViolationException: ORA-01400: Kan geen NULL invoegen in ("HR"."INFORMATIELEVERINGEN"."OUTPUTPRODUCT_TYPE").
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
     at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
     at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1079)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3887)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1508)
     at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:172)
     at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:788)
     at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeNoSelect(DatabaseAccessor.java:863)
     at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:583)
     at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:526)
     at org.eclipse.persistence.internal.sessions.AbstractSession.executeCall(AbstractSession.java:980)
     at org.eclipse.persistence.internal.sessions.IsolatedClientSession.executeCall(IsolatedClientSession.java:131)
     at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:206)
     at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:192)
     at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.insertObject(DatasourceCallQueryMechanism.java:341)
     at org.eclipse.persistence.internal.queries.StatementQueryMechanism.insertObject(StatementQueryMechanism.java:162)
     at org.eclipse.persistence.internal.queries.StatementQueryMechanism.insertObject(StatementQueryMechanism.java:177)
     at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.insertObjectForWrite(DatabaseQueryMechanism.java:465)
     at org.eclipse.persistence.queries.InsertObjectQuery.executeCommit(InsertObjectQuery.java:80)
     at org.eclipse.persistence.queries.InsertObjectQuery.executeCommitWithChangeSet(InsertObjectQuery.java:90)
     at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.executeWriteWithChangeSet(DatabaseQueryMechanism.java:290)
     at org.eclipse.persistence.queries.WriteObjectQuery.executeDatabaseQuery(WriteObjectQuery.java:58)
     at org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:740)
     at org.eclipse.persistence.queries.DatabaseQuery.executeInUnitOfWork(DatabaseQuery.java:643)
     at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWorkObjectLevelModifyQuery(ObjectLevelModifyQuery.java:108)
     at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWork(ObjectLevelModifyQuery.java:85)
     at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.internalExecuteQuery(UnitOfWorkImpl.java:2908)
     at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1291)
     at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1273)
     at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1233)
     at org.eclipse.persistence.internal.sessions.CommitManager.commitNewObjectsForClassWithChangeSet(CommitManager.java:224)
     at org.eclipse.persistence.internal.sessions.CommitManager.commitAllObjectsWithChangeSet(CommitManager.java:123)
     at org.eclipse.persistence.internal.sessions.AbstractSession.writeAllObjectsWithChangeSet(AbstractSession.java:3348)
     at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabase(UnitOfWorkImpl.java:1422)
     at org.eclipse.persistence.internal.sessions.RepeatableWriteUnitOfWork.commitToDatabase(RepeatableWriteUnitOfWork.java:610)
     at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabaseWithChangeSet(UnitOfWorkImpl.java:1527)
     at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.issueSQLbeforeCompletion(UnitOfWorkImpl.java:3181)
     at org.eclipse.persistence.internal.sessions.RepeatableWriteUnitOfWork.issueSQLbeforeCompletion(RepeatableWriteUnitOfWork.java:332)
     at org.eclipse.persistence.transaction.AbstractSynchronizationListener.beforeCompletion(AbstractSynchronizationListener.java:157)
     at org.eclipse.persistence.transaction.JTASynchronizationListener.beforeCompletion(JTASynchronizationListener.java:68)
     at weblogic.transaction.internal.ServerSCInfo.doBeforeCompletion(ServerSCInfo.java:1239)
     at weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:1214)
     at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:116)
     at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:1316)
     at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:2132)
     at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:272)
     at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:239)
     at weblogic.ejb.container.internal.BaseLocalObject.postInvoke1(BaseLocalObject.java:622)
     at weblogic.ejb.container.internal.BaseLocalObject.__WL_postInvokeTxRetry(BaseLocalObject.java:455)
     at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:52)
     at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.handleInvoke(Unknown Source)
     at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:35)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:140)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatchTask.java:88)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:64)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:662)
[2011-09-29T19:33:28.332+02:00] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.dispatch] [tid: orabpel.invoke.pool-4.thread-3] [userId: <anonymous>] [ecid: 4af4f9da03d6b2c4:-1e444ff3:132b61dbaea:-8000-0000000000000312,0:1:100000005] [APP: soa-infra] Failed to handle dispatch message ... exception ORABPEL-05002[[
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the reported exception is: Error committing transaction:; nested exception is: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.1.2.v20101206-r8635): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLIntegrityConstraintViolationException: ORA-01400: Kan geen NULL invoegen in ("HR"."INFORMATIELEVERINGEN"."OUTPUTPRODUCT_TYPE").
Error Code: 1400
Call: INSERT INTO INFORMATIELEVERINGEN (ID, DATUM_BEWAREN_TOT, BEWAARTERMIJN_IN_DAGEN, GEBRUIKER, ADRES_WAARNAAR_VERSTUURD, OUTPUTPRODUCT_TYPE, INTERMEDIAIR_PRODUKT, INHOUD_VERSTREKKING, RIN_ID, DETAIL_3, DETAIL_1, DETAIL_2, KETEN_OBJECT_TYPE, ORG_ID, TIG_ID, DATUM_SAMENSTELLING, KETEN_OBJECT_ID) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
     bind => [7, null, null, null, test, null, null, null, null, null, null, null, null, 1, 1, 2011-09-29, 42]
Query: InsertObjectQuery(nl.justid.verstrekkingen.model.entity.Informatielevering@2499c09)
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
ORABPEL-05002
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the reported exception is: Error committing transaction:; nested exception is: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.1.2.v20101206-r8635): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLIntegrityConstraintViolationException: ORA-01400: Kan geen NULL invoegen in ("HR"."INFORMATIELEVERINGEN"."OUTPUTPRODUCT_TYPE").
Error Code: 1400
Call: INSERT INTO INFORMATIELEVERINGEN (ID, DATUM_BEWAREN_TOT, BEWAARTERMIJN_IN_DAGEN, GEBRUIKER, ADRES_WAARNAAR_VERSTUURD, OUTPUTPRODUCT_TYPE, INTERMEDIAIR_PRODUKT, INHOUD_VERSTREKKING, RIN_ID, DETAIL_3, DETAIL_1, DETAIL_2, KETEN_OBJECT_TYPE, ORG_ID, TIG_ID, DATUM_SAMENSTELLING, KETEN_OBJECT_ID) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
     bind => [7, null, null, null, test, null, null, null, null, null, null, null, null, 1, 1, 2011-09-29, 42]
Query: InsertObjectQuery(nl.justid.verstrekkingen.model.entity.Informatielevering@2499c09)
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:207)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatchTask.java:88)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:65)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:887)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:909)
     at java.lang.Thread.run(Thread.java:662)
]]

Endpoints not published in Service Registry

Hi all,
I have published all the Enterprise services from the Discovery system(ECC) and they are available within the service registry.
But somehow the endpoints are not published to the Service Registry because of which I am not able to consume the services for UI development in VC.
I have the following concerns :
1) The ES are being tested successfully but not being sure why the endpoints were not published when the Services were published from the Discovery System.
2) Can we forcefully create the endpoints in the Service Registry. If so, plz let me know the procedure.
3) SP13 is applied on Discovery System, so I am not able to execute TCode SOAMANAGER to create Endpoints, so is there any other alternative, other than upgrading ECC to SP14.
Points will be rewarded for any help
Regards Brian

Hi Brian,
Maybe the issue is wrt the Service Registry destination definition. The correct system name should be picked from the SLD system name (under http://host:port/sld) definition (I think it CE1 by default). You can also refer other issues I faced in a similar situation that i documented in thread [Endpoints not published in Service Registry;
I take my earlier comment about using the Publish function in Service Registry. I learn it should be not be used.
As regards the ServicesRegistrySi(Proxy Definition) URL, I guess you can use http://localhost:port/ServicesRegistrySiService/ServicesRegistrySiPort?wsdl&mode=sap_wsdl
Regads
Suresh

Sender SFTP Adapter channel is not polling for files

Hello All,
Couple of SFTP sender adapter channel was failing in Developent system with u201Cdirectory listingu201D error.All SFTP sender channels stopped polling for the files in Developent system . We were unable to find the reason for adapter failure, Hence we restarted the j2ee server and adapter started polling files. Later we are facing the same issue in Quality system. THe adapter cahnnel is not polling files in Quality system even.
All lean tool adapters were showing the u201CHost key was not accepted erroru201D on 27th of Feb . As per the other channel trace, the time stamp of last successful polling and error time stamp of lean tool sender channels are exactly same
Eventhough two communication channels access the same SFTP adapter, one communicationchannel is getting 'Host key was not accepted error' but in other communication channel, files are getting picked.
Please let me know the solution if you have come accross this issue previously
Regards,
DilipKumar

Hi Mike,
Thanks for your reply.
Its not a standard SFTP adapter rather its a C-BURGER SFTP adapter.
Sorry I did not mention this in my previous post
Regards,
DilipKumar

How to password protect a site that is NOT published to .mac?

Hi There,
I was wondering if anyone has got a workaround for this in iWeb. I would like to password protect a site but am not publishing it to .mac. Is there a piece of code you can stick into the HTML manually to do this?
Thanks!
s

I am answering my own question! A friend tipped me off — your hosting company may offer password protection. That was the case for me. I went into the site settings and was able to set up a password for the entire site or only certain directories. I hope this helps someone!

In iweb changes not publishing

Since changing from mobileme server to ftp server, changes to website made in iweb do not publish?

If you are uploading your website files using the iWeb FTP, any old, existing files should get overwritten automatically. Try switching to another browser like Google Chrome or Firefox to view your site.
To find the file manager you need to login to your hosting account.
You can use the freeware Cyberduck to upload files and manage files on the server but it doesn't allow you to view the files on your Mac in the same window as the ones on the server...
http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html

IWeb not publishing site updates

Starting today - 5/18/09, A site I have in iWeb is no longer publishing updates. The site publishes to my mobile me account, and is redirected to my domain. This is the page in question - http://www.pitassidesigns.com/Portfolio/Web_Design.html
Besides the code iWeb puts out I have added the favicon code, and Google Analytics Code. For some reason when I made some changes to some images, they do not appear as they should. The first image should be swapped with the second, and now the second image is gone. The google code, and favicon code it still there, and I usually have to re-input it after updates. Also the page in iWeb remains red, as if it was not published. I tried to delete that page and file folder from my idisk, and iweb doesn't publish a new one as it should. I tried restarting and nothing. I tried publishing the whole site, and it remains the same.
Any help would be great, I don't feel like manually writing this page out in Dreamweaver, iWeb is so much easier.

Ignore this. As usual when I decide to post this it works on the 10th try. Not sure what happen there.

Adapter Module is not Invoking

Hi
I have done one adapter module and i have given that in Sender Communication Channel. I have written audit log as well. But its not invoking.I am not getting any thing on Audit Log. My Scenario is working normally. Actually i have to get Host name at destination side but i am not getting
I ave created on jar file. I have extrancted that jar file and i found the following files
<javafile>.class
<javafile>.java
ejb-j2ee-engine.xml
ejb-jar.xml
but i have extract other in built adapter module jar file their i found manifest.mf apart from above mention files.
I have create the jar files using nwds version 7.0
My Adapter module is not working. I have done everything fine.Can anyone tell me the solution
Best Regards
Ravi Shankar B
Message was edited by:
RaviShankar B

Hi,
Ur module name shud b like this
localejbs/<yourEJBClassName>
If you specify an incorrect or non-existing module name, it is simply ignored.
Check the following:
1. Your stateless session bean should implement SessionBean and Module.
2. The bean should have the following method
public ModuleData process()
Try to create a file in XI Server directory from your adapter module code and this way check whether your module is called or not.
<i>[Reward if helpful]</i>
Regards,
Prateek

Adapter Engine is not working

hi all
My Adapter Engine is not working in RWB.
In runtime workbench - message monitoring u2013 message from component - adapter engine is not working
experts provide me the solution
Regards
Raju

Hi
What u r not getting kindly elobrate.
R u using Component MOnitoring r Message Monitoring.
Component Monitoring --> Adapter Eninge --> u can see all CC
Im Message Moniotring --> AE --> u can Set the Sender and receiver System to view the messages
srini

Projects first created in Windows are now not publishing correctly from a Mac

I've been using the Windows version of Captivate for months without issues, putting together a large number of HTML5 courses, non-responsive. Lots of custom javascript via the 'Execute JavaScript' action for smartshapes, etc.
I just purchased a new Macbook Pro and then purchased a subscription license for Captivate. Now my cptx files that were working fine when opened and published from Windows Cp are very not publishing correctly - the javascript does not execute, etc. Everything *appears* fine within Captivate but I get issues upon preview/publish.
Thank goodness I have the 30 days to cancel the subscription and get a refund...but before I do that - has anyone else tried switching to a Mac and run into problems with Captivate projects?
Both machines have 8.01 installed. The only thing I can think of is, after installing 8.0 via the subscription download, I then did the 'Check for updates' and it went and downloaded and installed the 8.01 update. When I did this on Windows I followed the directions on a blog post somewhere (sorry - I forget the name!) that stressed deleting some directories on the machine first before running the update. I assumed the subscription files would be fixed/patched....

After struggling with this last night I took a look again this morning and narrowed down and corrected the problem. Basically, this is what happened to cause the issue and how I resolved it. Hopefully it helps others in the future.
Steps
Create project in Windows version of Cp (I was using version 8.01).
For my client's requirements, which are quite unique and complex compared to the typical Cp project, custom quiz questions/scoring had to be developed. Since these are HTML5 (non-responsive) courses, and Javascript is the fastest/most efficient way to do this, I used Javascript extensively for quizzes via the 'Execute Javascript' action. So for quiz questions, each answer is simply a smartshape (transparent, with answer text in it) that triggers the 'Execute Javascript' on click. In addition, on many of the quiz slides there are Edge Animate/HTML5 interactions embedded.
Worked fine on windows upon publish. But when I opened on a new Mac and published, when a question answer was clicked nothing would happen.
Turns out the problem seems to be with the text in the Javascript window. I think it somehow gets corrupted, though it looks fine. I had to literally delete the javascript, save it, and then copy it back in. Once I did that, it works.
I've invested too much time in this project so far, so don't want to risk any more major issues popping up like this, so I switched back to Windows and canceled my subscription this morning. Fortunately I have a license from my employer for Windows and will just use that with Boot Camp.

TS2167 I am running OS X 10.8.2 and IWeb 3.0.4 (601) and everytime I try to publish my website I get an unexpected error and it does not publish my changes. My website is pretty simple, mostly made up of iPhoto albums in different categories.

I am running OS X 10.8.2 and IWeb 3.0.4 (601) and everytime I try to publish my website I get an unexpected error and it does not publish my changes. My website is pretty simple, mostly made up of iPhoto albums in different categories.

Where are you publishing to? Can you publish successfully to a folder on your hard drive? Have you read this webpage: Publish iWeb site using FTP. It may have a clue to where the problem is.
A quick troubleshooting fix is
Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
However, when you delete the preference file you probably will have to use the app described below to select and open your domain file with iWeb:
In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

AQ-Adapter (Interconnect) do not publish

Similar Messages

Maybe you are looking for