AQ/MGW clob issue - strange message

Oracle version 9.2.0.4
Solaris 8
I am using AQ with the Message Gateway to write to MQ , I am getting the following error/warning (?) in the mgw.log file
2004-09-06 04:07:15 MGW AQD:MsgConsumer 3 TRACE worker0 non-temporary CLOB: size=1420 for class:
oracle.mgw.drivers.aq.AQMsgConsumer$MgwBasicMsg_Dequeuer@26f75b
The message writes to MQ, and I can receive confirmations back into AQ. However
nothing is removed from AQ when dequeued ... this is machine specific as it runs
just fine on a different machine. Does anybody have any idea what this message means ?
I have looked high and low but cannot find an explanation/documentation

The way I have this transformation setup, I'm assuming it's
being run during the dequeue. Would this cause the message to be moved
to the AQ exception queue on the 9i instance? Am I creating the
transformation as the correct user (the one adding the subscription and scheduling the propagation th MQ)?
Dennis..............

Similar Messages

System.log flood by strange messages

Hi all, I've see this strange messages on my system.log it is a real flood:
Feb 27 00:50:58 Melchior-1 kernel[0]: m71482545 0
Feb 27 00:50:58: --- last message repeated 2 times ---
Feb 27 00:50:58 Melchior-1 kernel[0]: m407168d8
Feb 27 00:50:58 Melchior-1 kernel[0]: m71482545 0
Feb 27 00:50:58: --- last message repeated 2 times ---
Feb 27 00:50:58 Melchior-1 kernel[0]: m407168d8
Feb 27 00:50:59 Melchior-1 kernel[0]: m71482545 0
Feb 27 00:50:59: --- last message repeated 2 times ---
Feb 27 00:50:59 Melchior-1 kernel[0]: m407168d8
Feb 27 00:50:59 Melchior-1 kernel[0]: m71482545 0
Feb 27 00:50:59: --- last message repeated 2 times ---
Feb 27 00:50:59 Melchior-1 kernel[0]: m407168d8
Feb 27 00:50:59 Melchior-1 kernel[0]: m71482545 0
Feb 27 00:50:59: --- last message repeated 2 times ---
Feb 27 00:50:59 Melchior-1 kernel[0]: m407168d8
Feb 27 00:51:00 Melchior-1 kernel[0]: m71482545 0
anyone known which process is doing that ?

Yup. Same issue here. It's quite disconcerting.

Wism occur strange message on management log

Hi there,
I got the strange messages on my wism(v4.1.158.0)
Jul 03 14:41:24.148 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:1a:70:a6:b9:fe
Jul 03 14:41:22.821 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:18:39:0b:93:04
Jul 03 14:41:22.820 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:18:39:0b:93:04
Jul 03 14:41:21.618 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:16:b6:92:d1:1e
Jul 03 14:41:21.601 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:16:b6:92:d1:1e
Previous message occurred 2 times.
Jul 03 14:41:21.600 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:16:b6:92:d1:1e
Jul 03 14:41:19.698 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:16:b6:92:d1:1e
Jul 03 14:41:19.688 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:16:b6:92:d1:1e
Previous message occurred 2 times.
Jul 03 14:41:19.687 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:16:b6:92:d1:1e
Jul 03 14:41:19.300 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:1a:70:a6:b8:ff
And the clients have the MAC on the log couldn't forward any packet to the network.
I couldn't find any idea on the CCO.
Do you have any idea about this message?
regards,
Jongkwan

Found this.... Might help hopefully, but its just a brief description, but at the end, of course.... call TAC
Error Message %APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on
MSCB. [chars]. Address:[hex]:[hex]:[hex]:[hex]:[hex]:[hex]
Explanation Could not Register IP Add on MSCB.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Search for REGISTER_IPADD_ON_MSCB_FAILED
http://www.cisco.com/en/US/docs/wireless/controller/message/guide/msgs2.html

IMac - strange message

I have an iMac DV G3 with OS9 and OSX 10.0 was working fine until the other day - it had question mark flashing I started it with software install disc OS9 and didn't realize my daughter had borrowed OSX from school to work on the school newspaper. I bought OSX from the internet and after backing up my photos to a flashdrive last night, installed the OSX 10.0 it said installation was successful then I got this strange message on the screen it starts with "panic(cpu0): unable to find driver for this platform: "PowerMac2,1" bunch of other stuff then ends with panic: We are hanging here...
Can someone please help me with this. Thanks much.

Hi Kenichi & Marie,
It strikes me that a good option at this point, given the OS issues and kernel panics at start-up, may be to beg or borrow another Firewire equipped Mac if possible, to boot the iMac CRT into Target Disc Mode, and to copy across the data from the iMacs HD to a folder on the other computer.
THis might save a lot of time if the kernel panic is actually occurring because of a hardware problem of some kind. Once you had done so you could go on to steps like erasing the HD etc much more safely.
That way the data would be "safe" and people could then try and sort out the other problems with less concern about losing things that matter.
Marie, just about any Mac from the time of the iMac G3 onwards would be able to do this, as long as it has enough free HD space to cope with your data. Know anyone with an iBook or a MacBook or such who would be prepared to help you with such a thing? Is there a local Apple user group, or perhaps a school, who could perhaps help out in this fashion?
Cheers
Rod

Strange message when paying online

Hi, For about the last month I have been getting a strange message when paying for stuff online. It usually works the second time I try! The message isYour authentication could not be completed because of a system error. If this happens consistently, please contact your CSR. I first thought virus/malware but scans have not found anything (Avast & Malwarebytes). I was using Firefox but have tried IE today as an experiment and I got the message on that too. I also tried a different c/card the other day and still got it! I have googled the message which seems to indicate card issuer problems but none of the occurances I've looked at are not that recent so I'm a bit unsure where to look and was wondering if it might be something to do the Sky site filtering software? Any thoughts would be appreciated.Nick

Claudio,
Fingers (well-chilled fingers) are X'ed for you.
At least you have not received the dreaded "4" error message...
Good luck to us all.
Hunt

HT1926 Installing iTunes 11.1.4 on windows XP issues warning message: Service "Apple Mobile Device' failed to start. starting iTunes shows MSVCR80.dll not found.

Normal update of iTunes to 11.1.4 fails. Suggests installing from web site
I install from iTunes.com. Install issues the messages:
Service "Apple Mobile Device' failed to start.
Verify that you have sufficient privileges to start system services
I do have necessary privilegs. I hit ignore. See window with successful install come up and finish with launch. I get the messages:
iTunes was not installed correctly.
Please reinstall iTunes
Error 7 (Windows error 126)
Tring to start iTunes from desktop gives:
This application failed to start because MSVCR80.dll was not found
Re-installing the application may fix the problem.
Further repair or remove/reinstall does not fix the problem (including after reboot)
Thie is the first time this has happened. I'm not sure where to go from here
Thanks for any help.

Earlier suggestion worked. That is, Use software add/remove to delete all 5 iTunes applications:
Apple Application Support
Apple Mobile Device Support
Aple Sortware Update
Bonjour
iTunes
Reboot and install/

Issue error message in a pop-up window

Hii experts,
How do I issue a message in a pop-up window in a normal report programming? For eg if i click on particular box in SAP graphic, a message window should come up with some information about that box.
Thanx in advance

Hi ,
First track the event let say at line selection(in case of reports)
then use
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
      EXPORTING
        endpos_col         = 80
        endpos_row         = 25
        startpos_col       = 1
        startpos_row       = 1
        titletext          = text-300
IMPORTING
    CHOISE             =
      TABLES
        valuetab           = l_return
     EXCEPTIONS
       break_off          = 1
       OTHERS             = 2
Append the errors in l_return.
l_return is of type below:
DATA: l_return LIKE bapireturn OCCURS 0 WITH HEADER LINE.
Thanks & Regards
Ruchi Tiwari

String Literal too long / CLOB Issue

I have a table with a "Clob" column called Message. This is where I store the message of an email. We have an internal email app. What is happening is I can't insert anything bigger then around 3990 or something around there. In my procedure I have the parameter coming in as clob and I use a TO_CHAR() around the table column and my parameter or my procedure gives me this error
PL/SQL: ORA-00932: inconsistent datatypes: expected - got CLOB
But when it runs and I put in a 9000 character message it says
Oracle.DataAccess.Client.OracleException was unhandled by user code
Message="ORA-01704: string literal too long
I'm using C# with
Oracle.DataAccess.Client.OracleConnection to create my oracle connection and Oracle 10g.
I'm calling this procedure from my app. By doing this am I causing it to only hold 4000 characters?
Here is a scaled down version of my code on just that column
CREATE OR REPLACE PROCEDURE EMAILINS (
P_MSG IN CLOB
AS
varT VARCHAR2(10000);
varSQL VARCHAR2(20000);
varTemp NUMBER;
BEGIN
-- SEE IF STRING EXISTS
SELECT 1 INTO varTemp
FROM tblEmail
WHERE TO_CHAR(MESSAGE) = P_MSG
EXCEPTION
WHEN TOO_MANY_ROWS THEN
varSQL := varT||CHR(10)||'***Multiple Rows Exist in Table tblEmail***';
DBMS_OUTPUT.PUT_LINE(varSQL);
WHEN NO_DATA_FOUND THEN
varT := P_MSG;
varSQL := 'INSERT INTO TBL_EMAIL( MESSAGE)'||CHR(10);
varSQL := varSQL || 'VALUES (tblEmail_SEQ.NEXTVAL,'||varT||')';
EXECUTE IMMEDIATE varSQL;
END EMAILINS;

In the first place, you don't need (and surely don't want) dynamic SQL to do the insert. Replace
varT := P_MSG;
varSQL := 'INSERT INTO TBL_EMAIL( MESSAGE)'||CHR(10);
varSQL := varSQL || 'VALUES (tblEmail_SEQ.NEXTVAL,'||varT||')';
EXECUTE IMMEDIATE varSQL;with the simpler
INSERT INTO tbl_email( <<primary key column>>, message )
VALUES( tblEmail_Seq.nextval, p_msg );Secondly, you want to use the DBMS_LOB.COMPARE function to determine whether the contents of the LOBs match. So replace
SELECT 1
INTO varTemp
FROM tblEmail
WHERE TO_CHAR(MESSAGE) = P_MSG with
SELECT 1
INTO varTemp
FROM tblEmail
WHERE dbms_lob.compare( message, p_msg ) = 0Of course, it is going to be relatively expensive to run this query every time you insert a new message unless the table is always going to be very small, which seems unlikely. It also doesn't prevent duplicate entries if there are multiple threads executing at the same time.
Justin

Strange message when logged in to bpel console

Hi All!
I just installed bpel on my linux machine. After starting the bpel server and logging into the console I saw this strange message:
Cannot find instances.
An attempt to fetch the instances using the where condition " ( ci_state = 1 OR ci_state = 2 OR ci_state = 3 )order by ci_modify_date desc " from the datastore has failed. The exception reported is: ORA-00942: table or view does not exist.
Please check that the machine hosting the datasource is physically connected to the network.
Also I created a pl/sql helloworld webservice, and a bpel process to invoke it through a partnerlink. After deploying it to the default domain I see only name of the bpel process in the deployed processes list unlike both the bple process name and the webservice name.
The linux flavor I am using is fedora red hat. The database is oracle 10g on the localhost itself. The bpel version is 10.1.2.0.2.
What could be the cause of these problems. I feel the second problem is because of the first problem that is there. Any suggestions and solutions please.
Thanking in advance,
Regards,
Deepika.

Hi All!
Ran the script for the view generation. Found it in domain_oracle.ddl. Granted dba privilege to orabpel to execute the script. Redeployed the bpel process. Now no error is there and the bpel process works fine.I think to successfully install bpel on linux box orabpel needs admin privileges.
Regards,
Deepa.

I am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in teh dynamic link library SQLite3.dll"

I am having trouble updating my operatI am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in the dynamic link library SQLite3.dll" Any ideas what my problem is?

Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy

Foreign Character Issue in Messages sent to MQ Series Queue

Hi Experts,
We are having a IDOC to JMS Scenario.We receive the IDOC and Convert it into a Single Line Flat File using a JAVA Mapping.We send the flat file message to MQ series 6.0 Queue using a JMS adapter.
We are facing issues when message contains foreign character like Chinese , German and Greek.
The Input\Output payload looks fine in SXMB_MONI and in the JMS Channel payload. when the message is put in the MQ Series Queue. When we open the messages in the JMS Q, the Foreign Character looks as "?????".
PFB some details on the Java Code and other Config Settings.
1. We read the messages from the Input Stream as UTF-8 and do the Transformation and Write the Output as UTF-8
we use writer class to write the output after conversion (shown below).
Writer osw = new OutputStreamWriter (osOutput,"UTF-8");
2. The MQ series is in UNIX box and CCSID of the Queue Manager is 819.
we have set the CCSID of the JMS channel 819.
can you please clarify in case any transformation is happening before placing the message in the queue and how to we handle this case from the channel or in the Java code.
Some Sample Character are u0395u03A3u03A4u0399u0391u03A4u039Fu03A1u0399u0391-u03A4u0391u0392u0395u03A1u039Du0395u03A3-u039Au0391u03A6 , u039Au039Fu039Du0399u039Fu03A1u0394u039Fu03A5 u03A7u03A1u03A5u03A3u0391 , and some Chinese Characters too

Hi All,
Thank you all . My problem is not resolved yet
I have one more useful info.
I set the Transport Protocol as TCP\IP and Kept the JMS Compliant as WebsphereMQ (Non-JMS) in JMS Channel Parameters TAB. In additional Parameters TAB i have set "JMS.TextMessage.charset" as ISO-8859-1.In this Setting, The Characters looks perfectly fine when i browse and view the messages in MQ Series Q. Messages are sent in MQSTR format, where the message has no header value.
Intially i had set JMS Compliant Field as "JMS Compliant" with additional param TAB set as ISO-8859-1, where the message is sent in MQHRF2 format containing header details. i also configure dynamic header values using AF_Modules to this header. Special Chars didnt work.
Now in MQSTR due to missing Header values the messages are not being identified and routed properly by the end system from the MQ series.
Now i need to find the missing loop, what happens when message is sent using WebSp MQ API's (MQSTR) and Java API (MQHRF2). I need to have MQHRF2 format with Messages body sent exactly as it is in MQSTR. Is there any parameter, which i need to set.
can anyone help me in this regard.

How to issue warning message in BADI ME_PROCESS_PO_CUST

Hi Guys,
I have already checked the forum regarding this. There are lots of threads. Unfortunately none of them helped me. I must be missing some thing in my code.
I tried issuing warning message in BADI ME_PROCESS_PO_CUST and method PROCESS_ITEM.
First i tried with normal message statement
MESSAGE w001(00) WITH text-001 text-002.
Didn't worked.
Next tried calling standard macros
DATA:mmmfd_cust_01 TYPE mmpur_metafield VALUE 90000000.
call method cl_contextfield_mm=>set_current_field
exporting im_field = mmmfd_cust_01.
mmpur_metafield mmmfd_cust_01.
mmpur_message_config 'W' 'X' ' '. "Tried all permutations here
mmpur_message_forced 'W' '00' '001' text-001 text-002 '' ''.
Still no solution
Tried with macro mmpur_message also
Can some one helpme out to solve this issue.
Thanks,
Vinod.

Hi all,
Thanks for the responce.
Not sure whether you have looked into BADI documentation or not. Please check below.
"Further notes
The above-mentioned macros are defined in the program MM_MESSAGES_MAC. Please include this program in your own application.
Never issue messages in BAdI ME_GUI_PO_CUST! This is the task of the business logic and must therefore be done via the BAdI ME_PROCESS_PO_CUST.
"Never use the ABAP statement MESSAGE in the BAdI ME_PROCESS_PO_CUST. Please use the macro mmpur_message_forced only. This macro only writes a message in the message collector.
If you wish to mark the business object as invalid in order to prevent posting, you must additionally use the INVALIDATE ( ) method of the relevant interface. In this connection, see also the code example in the PROCESS_ITEM method of the BAdI ME_PROCESS_PO_CUST.
I have tried almost all macros including mmpur_message_forced 'E' 'ME' '083' l_text ' ' ' ' ' '.
Not sure where i am missing:(
If i give error using MESSAGE statement it is working perfectly i.e. give error and save the PO. Only wanted to know if there are any implications.
Thanks,
Vinod

Strange message while booting up.

I get this message while booting and am wondering if anyone knows how to correct the problem.
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
I haven't found any solutions or much explanation of what it is using google.

When I read the message I felt brave enough to try installing this mysterious tomoyo-tools, system boots fine like I didn't have it and it's happened about for a week. I forgot to have installed that.
Today my machine have had strange message and didn't boot, I've tried the fallback and the first time has worked. From fallback I have reinstalled tomoyo-tools, thinking some upgrade could have broken the package.
Well, reboot the machine and system still not booting, neither fallback this time. WTH!
I've used the livecd to move the binary /sbin/tomoyo-init (yes of course I can chroot and pacman -R but moving the binary was enough), booting correctly and pacman -R it.
The last message written was about kernel start etc, and the system stuck.

Safari Crash - Problem with doodle (planer) app - doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings!

Safari Crash - Problem with doodle (planer) app - doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings! Works fine with an older Safari Version. Web link, call doodle app. You could see the website in the backround working but safari crashes after clicking on the error window. Any suggestions?

Turn off Private Browsing.
Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.

Strange messages

Lately I've been seeing what look like email messages coming across the upper corner of my monitor.
The only one I was able to remember part of read, "Pioneer working on after market car".
Couldn't read the rest as it disappears quickly.
The little box is exactly the same as when an email is coming in.
I also recall one having to do with iTunes.
I've looked in my mail box and download folder, but these messages don't appear in either.
I don't recall these happening in the past, seems as though they started about couple of weeks ago.
I have my download preference set to Mac App Store.
I only change it when I'm downloading an application that requires me to change to Anywhere.
I then go back to Mac App Store.
Can anyone shed any light on these strange messages that can't be viewed after they disappear off the screen?
Thank you.

It sounds like you are seeing Notifications. In the top right corner of your screen do you see the icon in the graphic below:
If you click on it it should show the various Notifications you have received. Dragging down from the top of the grey panel allows you to turn it off, if you wish:

AQ/MGW clob issue - strange message

Similar Messages

Maybe you are looking for