AQM Not Recording Call

I have faced issue with one system that calls are not recording on that system but when agents used any other system calls are recording. I have tried to uninstall AQM client on that system and re-installed again but still got no luck. Can some one guide any specific setting required on that system to make this system capable of recording?
Regards,
Muhammad Ali

Similar Messages

IPhone 4S does not display call log. "Recents" blank.

My iphone 4s does not record call log in the "Recents". I can not see who called me and whom I called. The list is blank.
Please help me to fix it.

Reject and Answer buttons only show up if the phone is not in standby. If the phone is in standby and /or the screen is locked, you will see swipe to answer instead.
Visual Voicemail is a carrier function. Facetime may not work with an unsupported carrier.
What country are you in and who is your carrier?

Cisco AQM 8.5 not recording : wav files are deleted from client side

Daer Networkers,
We do have Cisco AQM 8.5 SR2 ES1 installed with UCCX 8.5
The issue is that when accessing the Web interface of AQM and try to look for calls, I can't find any one.
When checking the client side, I can see that the call are being recorded : The FROM and TO files are there. But once the call is terminated, the wav file appear for some seconds and then it dissappears asi fi it's deleted.
The wav files are not in the server too;
I don't know what is the issue. Can you please help ?
Thanks in advance.

Hi,
This issue was resolved by doing a repair to the QM Base services, then run postinstall as if it was run for the first once.
The Proxy Gateway program was missing for some reason. After doing the repair the issue was resovled and calls are uploaded to the server.
Now I am facing another issue ! : I can hear the client voice only. Agent's voice couln't be heard in the recorded files. As if the agent's voice is not recorded. Can you please advise ?

SkypeViewLog not recording one caller

I have SkypeviewLog, and it has records of all incoming calls except those from one caller. Are there certain calls it will not record?

I have SkypeviewLog, and it has records of all incoming calls except those from one caller. Are there certain calls it will not record?

Calling all sound wizards: webcam not recording audio

Hey guys so I just bought a Creative Live! HD 1080 webcam to record video on my computer, and for some odd reason, the audio does not record with the video when I use the webcam's software. I experienced the same issue using ManyCam, but I did find that SmartPixel webcam software recorded audio when I used my headset, however it did not record audio with just the webcam mic.
I've tried just about everything in the control panel that would be related to sound, and that doesn't seem to be solving the issue. I also went to accessories: sound recorder to see if the audio would record from there, and it did.
I want to also note that the same issue occurred while using the Logitech c920. I returned that one because I could not get the audio OR video to record.
I am currently using Realtek High Definition Audio and Windows 7 Ultimate 64-bit. I've updated all drivers.
There must be a solution to this - anyone have some bright ideas?

Are you launching Captivate with Run As Administrator privilege?
If one of your co-workers logs onto your PC with their user profile, does the same microphone that doesn't work for you work OK for them?

HT4085 I Phone 5 started not recording phone call messages! How do I correct this?

IPhone 5 started to not record phone messages, how to fix

You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

BDC OK CODE FOR ENTER NOT RECORDING

I m creating a BDC Programme for uploading OLD PO date from excel to SAP System.
All PO's are Service PO.
PO's date and Delivery Date is in back date.
My programme working fine.
But i have to press enter manually due to PO Date = back date and Delivery date is also back date.
SHDB unable to record this event.
How to record this event.
Is there any way to disable system messages during BDC Programme.
When I press enter two times my programme runs very well.
Kindly help me.
Its very much urgent.
Code is give below.
REPORT zbdcme21n
 NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : l_file TYPE rlgrap-filename.
DATA: e_group_opened.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
*DATA : session RADIOBUTTON GROUP ctu.
DATA : group(12). "group name of session
group = 'BDC'.
*PARAMETERS: user(12) DEFAULT sy-uname. "user for session in batch
DATA : user(12).
user = sy-uname.
*DATA : keep AS CHECKBOX. "' ' = delete session if finished
DATA : keep TYPE checkbox.
keep = 'X'.
*PARAMETERS: holddate LIKE sy-datum. "'X' = keep session if finished
DATA : holddate LIKE sy-datum.
holddate = sy-datum.
PARAMETERS ctu RADIOBUTTON GROUP ctu. "call transaction
DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF i_tab OCCURS 0, "excel data stored in this file.
row TYPE alsmex_tabline-row,
col TYPE alsmex_tabline-col,
value TYPE alsmex_tabline-value,
END OF i_tab.
DATA : BEGIN OF wa_line1 OCCURS 0, "excel data stored in this file.
row TYPE alsmex_tabline-row,
col TYPE alsmex_tabline-col,
value TYPE alsmex_tabline-value,
srno TYPE i,
END OF wa_line1.
DATA : wa_line2 LIKE wa_line1 OCCURS 0 WITH HEADER LINE .
DATA : wa_hdr1 LIKE wa_line1 OCCURS 0 WITH HEADER LINE .
DATA : wa_hdr LIKE i_tab OCCURS 0 WITH HEADER LINE .
DATA : wa_line LIKE i_tab OCCURS 0 WITH HEADER LINE .
DATA : w_cnt TYPE i . "store total no of pos
DATA : w_hdr_counter VALUE 1. "for header line count
DATA : w_line_counter VALUE 1. "for Line Item Counter.
w_cnt = 0.
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
PARAMETER: dataset TYPE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR dataset.
PERFORM upload_file.
*include bdcrecx1.
START-OF-SELECTION.
PERFORM process_itab.
*include bdcrecx1.
START-OF-SELECTION.
PERFORM open_group.
**********************start for header
w_hdr_counter = 1.
WHILE w_hdr_counter <= w_cnt.
 PERFORM bdc_dynpro USING 'SAPMM06E' '0100'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RM06E-BEDAT'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 READ TABLE wa_hdr1 WITH KEY col = 2 srno = w_hdr_counter.
 PERFORM bdc_field USING 'EKKO-LIFNR'
 wa_hdr1-value. "'800000'.
 READ TABLE wa_hdr1 WITH KEY col = 3 srno = w_hdr_counter.
 PERFORM bdc_field USING 'RM06E-BSART'
 wa_hdr1-value. "'ZS'.
 READ TABLE wa_hdr1 WITH KEY col = 4 srno = w_hdr_counter.
 PERFORM bdc_field USING 'RM06E-BEDAT'
 wa_hdr1-value. " '14.01.2008'.
 PERFORM bdc_field USING 'RM06E-LPEIN'
 'T'.
 READ TABLE wa_hdr1 WITH KEY col = 13 srno = w_hdr_counter.
 PERFORM bdc_field USING 'RM06E-EEIND'
 wa_hdr1-value. "'14.01.2008'. "Delivery Date
 PERFORM bdc_field USING 'RM06E-LPEIN'
 'T'.
 READ TABLE wa_hdr1 WITH KEY col = 6 srno = w_hdr_counter.
 PERFORM bdc_field USING 'EKKO-EKORG'
 wa_hdr1-value. "'serv'.
 READ TABLE wa_hdr1 WITH KEY col = 7 srno = w_hdr_counter.
 PERFORM bdc_field USING 'EKKO-EKGRP'
 wa_hdr1-value. "'dce'. Purchase Group
 READ TABLE wa_hdr1 WITH KEY col = 8 srno = w_hdr_counter.
 PERFORM bdc_field USING 'RM06E-EPSTP'
 wa_hdr1-value. "'d'. Item Category
 READ TABLE wa_hdr1 WITH KEY col = 9 srno = w_hdr_counter.
 PERFORM bdc_field USING 'RM06E-KNTTP'
 wa_hdr1-value. "'p'. Account Asign Category
 READ TABLE wa_hdr1 WITH KEY col = 10 srno = w_hdr_counter.
 PERFORM bdc_field USING 'RM06E-WERKS'
 wa_hdr1-value. "'1001'.Plant
 READ TABLE wa_hdr1 WITH KEY col = 11 srno = w_hdr_counter.
 PERFORM bdc_field USING 'RM06E-LGORT'
 wa_hdr1-value. " '1101'. Store Location
 READ TABLE wa_hdr1 WITH KEY col = 12 srno = w_hdr_counter.
 PERFORM bdc_field USING 'RM06E-MATKL'
 wa_hdr1-value. "'c003'. Material Group
 PERFORM bdc_dynpro USING 'SAPLMLSP' '0200'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
********************end of Header Data*******************
data i type n value 1.
data bfield type string.
 LOOP AT wa_line1 WHERE col = 1 AND srno = wa_hdr1-srno.
 READ TABLE wa_line2 WITH KEY COL = 14 SRNO = wa_hdr1-srno ROW = wa_line1-ROW.
 PERFORM bdc_field USING 'RM11P-HEADTEXT'
 wa_line2-value. " 'Earthwork text'.
 concatenate 'ESLL-SRVPOS(' i ')' into bfield.
 PERFORM bdc_field USING 'BDC_CURSOR'
 bfield. " 'ESLL-SRVPOS(01)'. "increase counter
 PERFORM bdc_field USING 'RM11P-NEW_ROW'
 '10'.
 READ TABLE wa_line2 WITH KEY COL = 15 SRNO = wa_hdr1-srno ROW = wa_line1-ROW.
 PERFORM bdc_field USING bfield "'ESLL-SRVPOS(01)'
 wa_line2-value. "'5000000000'.
 concatenate 'ESLL-MENGE(' i ')' into bfield.
 READ TABLE wa_line2 WITH KEY COL = 16 SRNO = wa_hdr1-srno ROW = wa_line1-ROW.
 PERFORM bdc_field USING bfield "'ESLL-MENGE(01)' "qty
 wa_line2-value. "'15'.
 concatenate 'ESLL-MEINS(' i ')' into bfield.
 READ TABLE wa_line2 WITH KEY COL = 17 SRNO = wa_hdr1-srno ROW = wa_line1-ROW.
 PERFORM bdc_field USING bfield "'ESLL-MEINS(01)'
 wa_line2-value. "'ft3'.
 concatenate 'ESLL-TBTWR(' i ')' into bfield.
 READ TABLE wa_line2 WITH KEY COL = 18 SRNO = wa_hdr1-srno ROW = wa_line1-ROW.
 PERFORM bdc_field USING bfield " 'ESLL-TBTWR(01)'
 wa_line2-value. "'150'.
 PERFORM bdc_field USING 'BDC_OKCODE' "Manually added
 '/00'.
 PERFORM bdc_dynpro USING 'SAPLMLSK' '0200'.
 concatenate 'ESKN-PS_PSP_PNR' i ')' into bfield.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'ESKN-PS_PSP_PNR(01)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'VRTKZ1'
 'X'.
 concatenate 'ESKN-SAKTO(' i ')' into bfield.
 READ TABLE wa_line2 WITH KEY COL = 19 SRNO = wa_hdr1-srno ROW = wa_line1-ROW.
 PERFORM bdc_field USING 'ESKN-SAKTO(01)' "GL Account No.
 wa_line2-value. " '6010010'.
 concatenate 'ESKN-PS_PSP_PNR(' i ')' into bfield.
 READ TABLE wa_line2 WITH KEY COL = 20 SRNO = wa_hdr1-srno ROW = wa_line1-ROW.
 PERFORM bdc_field USING 'ESKN-PS_PSP_PNR(01)'
 wa_line2-value. " 'HR/KMP-KU'. "WBS Element
 PERFORM bdc_dynpro USING 'SAPLMLSK' '0200'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'ESLL-INTROW'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=BACK'.
 PERFORM bdc_field USING 'VRTKZ1'
 'X'.
 PERFORM bdc_dynpro USING 'SAPLMLSP' '0200'.
 i = i + 1.
 ENDLOOP.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=BACK'.
 PERFORM bdc_field USING 'VRTKZ1'
 'X'.
 PERFORM bdc_dynpro USING 'SAPLMLSP' '0200'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
*perform bdc_field using 'RM11P-HEADTEXT'
 'Earthwork text'.
*perform bdc_field using 'BDC_CURSOR' "Start Service Line 2
 'ESLL-SRVPOS(02)'.
*perform bdc_field using 'RM11P-NEW_ROW'
 '10'.
*perform bdc_field using 'ESLL-SRVPOS(02)'
 '5000000006'.
*perform bdc_field using 'ESLL-MENGE(02)'
 '10'.
*perform bdc_field using 'ESLL-MEINS(02)'
 'kmk'.
*perform bdc_field using 'ESLL-TBTWR(02)'
 '500'.
*perform bdc_dynpro using 'SAPLMLSK' '0200'.
*perform bdc_field using 'BDC_CURSOR'
 'ESLL-INTROW'.
*perform bdc_field using 'BDC_OKCODE'
 '/00'.
*perform bdc_field using 'VRTKZ1'
 'X'.
*perform bdc_dynpro using 'SAPLMLSK' '0200'.
*perform bdc_field using 'BDC_CURSOR'
 'ESKN-PS_PSP_PNR(01)'.
*perform bdc_field using 'BDC_OKCODE'
 '/00'.
*perform bdc_field using 'VRTKZ1'
 'X'.
*perform bdc_field using 'ESKN-SAKTO(01)'
 '6010010'.
*perform bdc_field using 'ESKN-PS_PSP_PNR(01)'
 'HR/KMP-KU'.
*perform bdc_dynpro using 'SAPLMLSK' '0200'.
*perform bdc_field using 'BDC_CURSOR'
 'ESLL-INTROW'.
*perform bdc_field using 'BDC_OKCODE'
 '=BACK'.
*perform bdc_field using 'VRTKZ1'
 'X'.
*perform bdc_dynpro using 'SAPLMLSP' '0200'.
*perform bdc_field using 'BDC_OKCODE'
 '/00'.
*perform bdc_field using 'RM11P-HEADTEXT'
 'Earthwork text'.
*perform bdc_field using 'BDC_CURSOR'
 'ESLL-KTEXT1(01)'.
*perform bdc_field using 'RM11P-NEW_ROW'
 '10'.
*perform bdc_dynpro using 'SAPLMLSP' '0200'.
*perform bdc_field using 'BDC_OKCODE'
 '=ESB'.
*perform bdc_field using 'RM11P-HEADTEXT'
 'Earthwork text'.
*perform bdc_field using 'BDC_CURSOR'
 'ESLL-KTEXT1(01)'.
*perform bdc_field using 'RM11P-NEW_ROW'
 '10'.
*perform bdc_dynpro using 'SAPMM06E' '0120'.
*perform bdc_field using 'BDC_CURSOR'
 'RM06E-EBELP'.
*perform bdc_field using 'BDC_OKCODE'
 '=MALL'.
*perform bdc_field using 'RM06E-EBELP'
 '10'.
 PERFORM bdc_dynpro USING 'SAPMM06E' '0120'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RM06E-EBELP'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=KOPF'.
 PERFORM bdc_field USING 'RM06E-EBELP'
 '10'.
 PERFORM bdc_dynpro USING 'SAPMM06E' '0101'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'EKKO-EKGRP'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=TXK'.
*perform bdc_field using 'EKKO-EKGRP'
 'DCE'.
*perform bdc_field using 'EKKO-PINCR'
 '10'.
*perform bdc_field using 'EKKO-UPINC'
 '1'.
*perform bdc_field using 'EKKO-WAERS'
 'INR'.
*perform bdc_field using 'EKKO-WKURS'
 ' 1.00000'.
 PERFORM bdc_dynpro USING 'SAPMM06E' '0103'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RM06E-LTEX1(01)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=BU'.
 PERFORM bdc_field USING 'RM06E-LTEX1(01)'
 'Old PO no.'.
*perform bdc_transaction using 'ME21'.
 w_hdr_counter = w_hdr_counter + 1.
ENDWHILE.
CALL TRANSACTION 'ME21' USING bdcdata MODE 'A'.
PERFORM close_group.
***************forms************
FORM upload_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
*def_filename = ' '
*def_path = ' '
*mask = ' '
mode = '0'
title = 'Choose the Appropriate excel sheet for service PO upload'
IMPORTING
filename = dataset
*EXCEPTIONS
*inv_winsys = 01
*no_batch = 02
*selection_cancel = 03
*selection_error = 04
l_file = dataset.
PERFORM read_exceldata.
ENDFORM. "UPLOAD_FILE
*& Form READ_EXCELDATA
 text
FORM read_exceldata.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = l_file
i_begin_col = 1
i_begin_row = 2
i_end_col = 25
i_end_row = 4
TABLES
intern = i_tab
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
ENDFORM. "READ_EXCELDATA
create batchinput session *
(not for call transaction using...) *
FORM open_group.
IF session = 'X'.
 SKIP.
 WRITE: /(20) 'Create group'(i01), group.
 SKIP.
open batchinput group
 CALL FUNCTION 'BDC_OPEN_GROUP'
 EXPORTING
 client = sy-mandt
 group = group
 user = user
 keep = keep
 holddate = holddate.
 WRITE: /(30) 'BDC_OPEN_GROUP'(i02),
 (12) 'returncode:'(i05),
 sy-subrc.
ENDIF.
ENDFORM. "OPEN_GROUP
end batchinput session *
(call transaction using...: error session) *
FORM close_group.
IF session = 'X'.
close batchinput group
 CALL FUNCTION 'BDC_CLOSE_GROUP'.
 WRITE: /(30) 'BDC_CLOSE_GROUP'(i04),
 (12) 'returncode:'(i05),
 sy-subrc.
ELSE.
 IF e_group_opened = 'X'.
 CALL FUNCTION 'BDC_CLOSE_GROUP'.
 WRITE: /.
 WRITE: /(30) 'Fehlermappe wurde erzeugt'(i06).
 e_group_opened = ' '.
 ENDIF.
ENDIF.
ENDFORM. "CLOSE_GROUP
*& Form BDC_DYNPRO
 text
 -->PROGRAM text
 -->DYNPRO text
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
****bdc field************
FORM bdc_field USING fnam fval.
IF FVAL <> NODATA.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDIF.
ENDFORM. "BDC_FIELD
FORM process_itab.
APPEND LINES OF i_tab TO wa_hdr .
DELETE wa_hdr WHERE col > 13 .
APPEND LINES OF i_tab TO wa_line .
DELETE wa_line WHERE col <> 1 AND col < 14 .
DATA : w_sr TYPE i.
w_sr = 0.
LOOP AT wa_hdr.
 IF wa_hdr-col = 1.
 w_sr = wa_hdr-value.
 ENDIF.
 wa_hdr1-row = wa_hdr-row.
 wa_hdr1-col = wa_hdr-col.
 wa_hdr1-value = wa_hdr-value.
 wa_hdr1-srno = w_sr.
 APPEND wa_hdr1.
 w_cnt = wa_hdr-row.
ENDLOOP.
w_sr = 0.
LOOP AT wa_line.
 IF wa_line-col = 1.
 w_sr = wa_line-value.
 ENDIF.
 wa_line1-row = wa_line-row.
 wa_line1-col = wa_line-col.
 wa_line1-value = wa_line-value.
 wa_line1-srno = w_sr.
 APPEND wa_line1.
ENDLOOP.
w_sr = 0.
CLEAR wa_line2.
LOOP AT wa_line1.
 wa_line2-row = wa_line1-row.
 wa_line2-col = wa_line1-col.
 wa_line2-value = wa_line1-value.
 wa_line2-srno = wa_line1-srno.
 APPEND wa_line2.
ENDLOOP.
ENDFORM. "PROCESS_ITAB
***************forms************

Hi Pradeep
I find there is a problem in your code
When ever you use
PERFORM bdc_field USING 'BDC_OKCODE'
you should follow it up with
PERFORM bdc_dynpro USING <prg name> <screen number>
Please find code below with changes from a part of your code
PERFORM bdc_field USING 'RM06E-MATKL'
wa_hdr1-value. "'c003'. Material Group
* comment this statement is not needed now.
* PERFORM bdc_dynpro USING 'SAPLMLSP' '0200'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
READ TABLE wa_line2 WITH KEY COL = 14 SRNO = wa_hdr1-srno ROW = wa_line1-ROW.
* Put the bdc_dynpro for the prg name and screen number (I might be wrong with prg name and
* Screen number
PERFORM bdc_dynpro USING 'SAPLMLSK' '0200'.
Reward points as this will definitely help you
Edited by: Sriram Chandran on Mar 15, 2008 4:39 PM

Server side function not get called after dispatching cairngorm event second time on same page

Hi All,
I am facing a urgent issue regarding cairngorm event. Actually my page contain 3 button add,delete,save
and clicking of any button I do the respected functionality. For ex:
I click the add button & on clicking of add button I fire a cairngorm evnt & after getting response from server side that the record is added
I displayed a message that the record is added & update the data source.
After addition of the record , with out going to other page if I perform the same functionaly(Like adding another record) on same page the cairngorm
event not call the server side function - after debugging I find out that cairngorm event reach to the corresponding excutecommand function & called that function but it is not calling my server side function & I also din't get any error message .
I dont know why the server side function not get called?. similarly if I try for delete or update case the same things happend. Only for the first time it works properly but not for the second time.
Could any of you please tell me why the cairngorm event not calling the server side function.
Thank you for your kind assistance.
Regards,
Ujjwal

Okay, well I think I've worked out the problem.
In ASP.NET we would typically bind repeating controls such as DataLists and Repeaters manually using Control.DataBind(), because we're usually using a separate class library containing collections for our objects. Seems the SAP Table control doesn't like this approach.
I changed the code so that the databinding is specified on the control, and call the Page's DataBind() method and it all worked fine.
One tip: because the collection I used to bind to is in a separate class library, I receieved a BC306523: Reference required to assembly MyAssemblyName... message, even though I had a reference to the assembly in my project and the DLL is being properly deployed. To fix this, you must include the following directive at the top of the component's ASCX file:
<%@ Assembly Name="AssemblyName" %>

ReturnEvent not get called after search more than 10 times in LOV page

hi there,
I using ADF and Jdeveloper 10.3.1.2
In my project I have a form which called a LOV page for selecting multiple records and submit button sumup the values of each selected row of LOV and return to the main form and display added value on text field.
problem is when I search records more than 10 times or more I put search criteria and select row on each time. After click on submit the value of each row is sum up return on the main form but it not reflected on main form because ReturnListener not get called .
But when I select many rows more than 10 without searching then the ReturnListener get called when it returning on main form.
So should I do so that ReturnListener get called.
Is it any bug of ADF or Jedeveloper .

Hi,
depends on whether you control the BPM task flow or not. If you do, have a look at this thread for how to debug the problem
How to debug "Attempt to validate an already invalid RegionSite"?
Otherwise, post it to the SOA forum if this is initiated by their generated code. The most common reason though is that the task flow lacks a default activity. So if the default activity is somewhat calculated dynamically in your application then this may be a reason
Frank

Module Function not being called by the planning function

Hi all,
I am having a problem with the MF assigned to the planning function of my planning level. It's not being called when executing the layout using Planning Folder. This action is suppose to be taken when saving the entries of the layout (I have made the proper setting in planning folder)
When I execute the planning folder and manually introduce data in the layout and save, the MF is not executed but data is loaded in the infocube anyway. I have put a breakpoint in the MF but never stops, as never has been called.
Please, could anyway let me know his comments?
Best Regards!
José.-

Hi Jose,
There could be two reasons why the FM might not work.
1. The level selections for which the FM runs and the Layout gets executed might different and the FM is not getting the Requisite Data set to read data from .
The solution could be check the level selections and execute the FM .Also after you save the Data ,please do an F9 to check the display message.Chekc if oyu Function module is reading any data set at all(ifit says 0 read ,0 changed statement i mean).
2. The second reason could be that the FM is not initialised at all.To initialise the FM you need to write an initialisation FM and place it in the INIT part of the Exit function.This creates dummy records if your data set is initially empty which is the case here.Here is a sample code you might get reference from .
Create one dummy combination
If we don't do this, the upload won't work since the second function
will not be executed at all in case no transaction data exists so far.
The combination must be a subset of the planning level!
" >>> BEGIN INSERT
IF l_count = 1.
 EXIT.
ELSE.
 CLEAR ls_chas.
 CLEAR: ls_chasel.
 LOOP AT ito_chasel INTO ls_chasel.
 CLEAR: ls_charng.
 READ TABLE ls_chasel-t_charng INTO ls_charng INDEX 1.
 IF sy-subrc = 0.
 ASSIGN COMPONENT ls_chasel-chanm OF STRUCTURE ls_chas TO <f>.
 IF sy-subrc = 0.
 <f> = ls_charng-low.
 ENDIF.
 ENDIF.
 CLEAR: ls_chasel.
 ENDLOOP.
ENDIF.
" <<< END INSERT
COLLECT ls_chas INTO lto_chas.
eto_chas = lto_chas.
ENDFUNCTION.
Hope this helps.
regards
Sai Vishnubhatla

Feature request: record calls and messages on iPhone

I'm trying to generate interest for some features I think should be introduced. What do you think of this one...
The iPhone should be able to record calls and messages to save as an audio file on your computer. Aside from providing the ability to keep a personal archive of important or meaningful calls and messages, this introduces another revolutionary new feature:
Imagine if every call you made on your phone was recorded automatically, so you could review what someone said even after hanging up the phone. Each call could be saved in a temporary location, and recordings could be saved permanently by clicking "Save" on the corresponding entry in the call log. This way, you wouldn't ever have to worry about forgetting what someone said, and you can forever save the memorable phone calls that impact your life. This feature would also be extremely useful for recording phone interviews for later review and transcription.
This feature would likely be relatively easy to adopt, and would certainly be a revolutionary addition to a revolutionary device.

Thanks, I already did give Apple feedback though. I was just posting it here to try to generate some more support for the idea. I'm new to the forum, so I'm not sure if this is an appropriate type of thing to post, so please let me know if it's generally not appreciated to put feature suggestions up for discussion.

My iphone is not recording voicemail messages that callers said they left for me-how to fix?

My iphone is not recording voicemail messages that callers said they left for me. The calls are showing up in voicemail list (no notification sound, but the discussion length is zero seconds. How do I fix this?

Most voicemail issues are dealt with by the cellular carrier and that is where the recording resides rather than on the phone. The following has some things you may troubleshoot in addition to contacting your carrier: http://support.apple.com/kb/TS4430

Audio file not recorded through network

Hi All,
I am trying to capture audio (wave) file from audio recording device and recording that.
I am able do that successfully in single computer, but when i am trying through network audio file is not created at server.
I am using file protocol for file location. and my JMF version JMF2.1.1e
Is RTP is required to solve above issue?
i used RTP also am able to transit audio, but its not recording....
Is there any other way to solve this problem?
Please provide me any code samples or reference documentation regarding this.
Thanks in advance
jbreddy

below mentioned code used in an applet to create audio file
===================================
import javax.media.protocol.DataSource;
import javax.media.protocol.FileTypeDescriptor;
import javax.media.protocol.ContentDescriptor;
import javax.media.control.TrackControl;
import javax.media.control.FormatControl;
import javax.media.rtp.event.*;
* Title: 
* Description: 
* Copyright: Copyright (c) 2004
* Company: 
* @author not attributable
* @version 1.0
public class Media {
public Media(String fileName, int timeInterval) {
System.out.println(" Media fileName="+fileName);
CaptureDeviceInfo di = null;
Processor p = null;
StateHelper sh = null;
Vector deviceList = CaptureDeviceManager.getDeviceList(new AudioFormat(
"linear", 8000, 8, 1));
if (deviceList.size() > 0) {
di = (CaptureDeviceInfo) deviceList.elementAt(0);
else {
// Exit if we can't find a device that does linear,
// 44100Hz, 16 bit,
// stereo audio.
System.exit( -1);
try {
p = Manager.createProcessor(di.getLocator());
sh = new StateHelper(p);
catch (IOException e) {
e.printStackTrace();
System.exit( -1);
catch (NoProcessorException e) {
e.printStackTrace();
System.exit( -1);
// Configure the processor
if (!sh.configure(10000)) {
System.exit( -1);
// Set the output content type and realize the processor
p.setContentDescriptor(
new ContentDescriptor( ContentDescriptor.RAW_RTP));
TrackControl track[] = p.getTrackControls();
boolean encodingOk = false;
// Go through the tracks and try to program one of them to
// output gsm data.
/*for (int i = 0; i < track.length; i++) {
if (!encodingOk && track[i] instanceof FormatControl) {
if (((FormatControl)track).
setFormat( new AudioFormat(AudioFormat.GSM_RTP,
8000,
8,
1)) == null) {
track[i].setEnabled(false);
else {
encodingOk = true;
} else {
// we could not set this track to gsm, so disable it
track[i].setEnabled(false);
if (!sh.realize(10000)) {
System.exit( -1);
// get the output of the processor
DataSource source = p.getDataOutput();
// create a File protocol MediaLocator with the location of the
// file to which the data is to be written
String rtpPath="rtp://192.168.101.29:49150/audio";
MediaLocator dest = new MediaLocator( rtpPath +fileName);
// create a datasink to do the file writing & open the sink to
// make sure we can write to it.
DataSink filewriter = null;
try {
filewriter = Manager.createDataSink(source, dest);
filewriter.open();
catch (NoDataSinkException e) {
e.printStackTrace();
System.exit( -1);
catch (IOException e) {
e.printStackTrace();
System.exit( -1);
catch (SecurityException e) {
e.printStackTrace();
System.exit( -1);
// if the Processor implements StreamWriterControl, we can
// call setStreamSizeLimit
// to set a limit on the size of the file that is written.
StreamWriterControl swc = (StreamWriterControl)
p.getControl("javax.media.control.StreamWriterControl");
//set limit to 5MB
if (swc != null) {
swc.setStreamSizeLimit(5000000);
// now start the filewriter and processor
try {
System.out.println("filewriter="+filewriter);
filewriter.start();
catch (IOException e) {
e.printStackTrace();
System.exit( -1);
// Capture for 5 seconds
double time = timeInterval * 0.7 * 1000;
System.out.println("TIME INTERVAL ="+time+":INT ="+(int)time);
sh.playToEndOfMedia((int)time);
//sh.configure((int)time);
sh.close();
// Wait for an EndOfStream from the DataSink and close it...
filewriter.close();
public static void main(String args[]) {
System.out.println("in side main method");
String fileName = "QQ";
for (int count = 0; count <= 10; count++) {
Media m = new Media(fileName+count+".wav", 2);

NotifyCB notification procedure not being called.

Hi.
I'm running on an 11g (11.2.0.2.0) database and trying to get my notification procedure called in advanced queues.
I followed the example by asktom here:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:8760267539329
I completed the same steps except for the creation of the table he inserts his de-queued message into (instead I redirected the insert to another pre-existing table).
Everything works fine upto a point. The message is placed into the queue ( and I can query on it to confirm it's there)
However the dequeue routine ins't being called.
I've included logging code into it and confirmed it's not being called.
Is there an extra step that needs to be performed to enable the de-queue routine to be called ?
Regards,
Greg.

Hi Paul.
Thanks for staying with me on this.
Currently, my job_queue_processes is set as:
select value from v$parameter where name='job_queue_processes';
14The sql queries you have are slightly different from the doc id, so hadn't run them before.
The first returned no result, so I checked entries in dba_scheduler_jobs and found no lower(job_actions) records that were like '%register_driver%'.
Should an entry be there at least? If so, is that part of a normal install of the database where AQ is concerned ?
As for the second query, no results either.
With that in mind, I checked entries in sys.aq_srvntfn_table_1 to look for the msgid of the message that was enqueued.
I can confirm my message is listed in my app_queue_tablename (which in my code is AQ_MESSAGE_QTAB) however,
it's not listed at all iin sys.aq_srvntfn_table_1 (I checked by outputing the msgid parameter of the dbms_aq.enqueue call and looked for that)
Would the %register_driver% dba_scheduler_jobs entry have created that record in sys.aq_srvntfn_table_1 if it was there and running?
Regards,
Greg.
EDIT: I can't see any trace files being generated nor any items in the alert log when a message is enqueued.
As for the emon process, sorry I'm not sure what that is. I see it mentioned on the metalink site but wasn't sure what it was.
EDIT2: I'll be away for the next 2 weeks so thank you for your help albeit I wont be able to respond until then.
Edited by: Greg Block on 27/06/2012 14:55

CommandButton actions not getting called when "disabled" element present

MyObjectForm.jsp contains commandButtons for "add", "update" and "delete" that are enabled/disabled according to the value of the bound id field.
MyObjectForm.jsp
<html>
<body>
<f:view>
<h:form id="create">
<h:inputHidden id="id" value="#{myObjectBean.id}" />
<h:panelGrid columns="3" border="0">
Name: <h:inputText id="name"
requiredMessage="*"
value="#{myObjectBean.name}"
required="true"/>
<h:message for="name"/>
// other fields
<h:commandButton id="add"
value="Add" disabled="#{myObjectBean.id!=0}"
action="#{myObjectBean.add}"/>
<h:commandButton id="update"
value="Update" disabled="#{myObjectBean.id==0}"
action="#{myObjectBean.update}"/>
<h:commandButton id="delete"
value="Delete" disabled="#{myObjectBean.id==0}"
action="#{myObjectBean.delete}"/>
<h:commandButton id="delete2"
value="Delete (no disabled element)"
action="#{myObjectBean.delete}"/>
</h:form>
</f:view>
</body>
</html>In its managed bean, MyObjectBean, if an id parameter is found in the request, the record is read from the database and the form is populated accordingly in an annotated @PostConstruct method:-
MyObjectBean.java
public class MyObjectBean {
private int id;
/** other properties removed for brevity **/
public MyObjectBean() {
LOG.debug("creating object!");
@PostConstruct
public void init() {
String paramId = FacesUtils.getRequestParameter("id");
if(paramId!=null && !paramId.equals("")){
getById(Integer.parseInt(paramId));
LOG.debug("init id:"+id);
}else{
public String delete(){
LOG.debug("delete:"+id);
MyObjectVO myObjectVO = new MyObjectVO();
ModelUtils.copyProperties(this, myObjectVO);
myObjectService.removeMyObjectVO(myObjectVO);
return "";
public String add(){
LOG.debug("add");
MyObjectVO myObjectVO = new MyObjectVO();
ModelUtils.copyProperties(this, myObjectVO);
myObjectService.insertMyObjectVO(myObjectVO);
return "";
public String update(){
LOG.debug("update:"+id);
MyObjectVO myObjectVO = new MyObjectVO();
ModelUtils.copyProperties(this, myObjectVO);
myObjectService.updateMyObjectVO(myObjectVO);
return "";
public void getById(int id){
MyObjectVO myObjectVO= myObjectService.findMyObjectById(id);
ModelUtils.copyProperties(myObjectVO, this);
/** property accessors removed for brevity **/
}When no parameter is passed, id is zero, MyObjectForm.jsp fields are empty with the "add" button enabled and the "update" and "delete" buttons disabled.
Completing the form and clicking the "add" button calls the add() method in MyObjectBean.java which inserts a record in the database. A navigation rule takes us to ViewAllMyObjects.jsp to view a list of all objects. Selecting an item from the ViewAllMyObjects.jsp list, adds the selected id to the request as a paramter and a navigation rule returns us to MyObjectForm.jsp, populated as expected. The "add" button is now disabled and the "update" and "delete" buttons are enabled (id is no longer equal to zero).
Action methods not getting called
This is the problem I come to the forum with: the action methods of commandButtons "update" and "delete" are not getting called.
I added an extra commandButton "delete2" to the form with no "disabled" element set and onclick its action method is called as expected:-
commandButton "delete2" (no disabled element) - works
<h:commandButton id="delete2"
value="Delete (no disabled element)"
action="#{myObjectBean.delete}"/>Why would "delete2" work but "delete", not?
commandButton "delete" (disabled when id is zero) - doesn't work
<h:commandButton id="delete"
value="Delete" disabled="#{myObjectBean.id==0}"
action="#{myObjectBean.delete}"/>The obvious difference is the "disabled" element present in one but not the other but neither render a disabled element in the generated html.
Am I missing something in my understanding of the JSF lifecycle? I really want to understand why this doesn't work.
Thanks in advance.
Edited by: petecknight on Jan 2, 2009 1:18 AM

Ah, I see (I think). Is the request-scoped MyObjectBean instantiated in the Update Models phase? If so then the id property will not be populated at the Apply Request Values phase which happens before this, making the commandButton's disabled attribute evaluate to true.
Confusingly for me, during the Render Response phase, the id property is+ set, so the expression is false (not disabled) giving the impression that the "enabled" buttons would work.
So, is this an flaw in my parameter passing and processing code or do you see a work around?

AQM Not Recording Call

Similar Messages

Maybe you are looking for