AR 8 Professional

Recently, I have noriced that I can not add DOC files to create a PDF file. I have to convert the DOC files to PDF and then marged them together. This creates two files for same subject. My Doc files are created in 2003 MS Office pro. What is the problem?

I am soryy - it is Acrobat.
I start with combining files.
Then go thru Add files .
Added DOC files.
It starts combining and then comes with a message "Please check to see if you have Read permission for the above files."
The DOC files under the Attributes "Read Only" and "Hidden" not checked.
This problem started a few months ago.
I do not have any problem in combining XLS files. The combining process does not require creation of PDF file first. The settings in Attributes in XLS are exactly the same as DOC files.

Similar Messages

Is there a limit of how many resources can be shared via a single Resource Pool in Project 2010 Professional standalone?

We have a single master project resource pool of over 150 resources that are shared across let's say 10-15 sub projects or sharer files.
We are using Microsoft Project Professional (standalone no project server)
Are you aware of any limitations outside of project server with resource pool and sharing, or should we be using Project server (as I have read a lot of articles about resource pool sharing working better in project server)
I'd like to get clarification on:
1. I read that the calendars for resources (of which there could be many shift patterns etc.) should always be created in the master project only, not in the sharer files. In my testing I see that a shared resource also brings the additional calendars from
the Master Project file - and can be chosen in the calendar column from Resource sheet.
2. Each sharer file can have it's own specific project calendar, but the resource calendar (used by the assigned resources from the pool) will drive the scheduling (as per normal), unless;
3. A specific task has a 'Task Calendar' applied to it AND "scheduling ignores resource calendars" is ticked.
I am trying to find an article that addresses, in detail, the limitations or 'look out fors' in this area. I have found plenty about how to create and share resources, but this is more troubleshooting.
Any advice or direction that can be given would be appreciated. Thanks.

No limit to resources, but linked master and resource pools are at high risk of file corruption if you rename, over-write or move a linked file without removing it from the master and pool first. Files will corrupt, its when not if.
Master files should never have any resources or tasks in them, only inserted projects.
I much prefer creating master files with the Link option deselected. This copies all data and consolidates resource info (so no pool needed). I record a macro to create new masters each week. This method has no corruption risk.
Your alternative now is to experiment with Project Server. By far the best way to prototype a system is to get Project Online through Microsoft, ProjectHosts or Bemo. It will give you access to a vanilla project server very quickly and cost for a few months
testing is trivial for a few users.
If you go ahead with a full implementation I strongly recommend getting a qualified Project Server partner to help you implement the full system.
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

"HP laserjet professional utility" does not work in osx 10 (Yosemite)

All the major functions of this printer work fine in Yosemite, but not the "HP laserjet professional utility"The driver shown in System Preferences/Printer for my Laserjet P1606dn is version 6.9 (I am unable to knowif this is the version provided by the latest HP printer update, which was installed via the App Store.) I note this exact issue was raised for OSX7 in November 2014, but for a diiferent model printer. My printer is on my local wifi network, and that earlier case seemed to invove a direct USB connection. The solution offered in that thread, 4694464,may not be applicable now, so I seek advice In the panel for my 1606dn within System Preferences/Printer offers a button to launch the "HP Professional Utility", but when clicked an app launches called the "HP Professional Utility" but then nothing. I am trying to access the printer controls that will keep it from turning itself off when idle, and the documentation says the "HP Professional Utility" will allow that change. Please advise

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having some issues with adjusting the power save mode settings on your Laserjet P1606dn. I can help with that. First make sure the printer is plugged directly into a wall outlet and not a surge protector. If the printer is connected with an ethernet cable to a router then you may be able to do this instead:On the printer hold down the button that looks like a sheet of paper with an arrow on it for about ten seconds. This should print out a report.On your Mac open a browser and enter the printer's IP Address in your Address bar exactly as it appears on the page. When you are finished click on enter/return.This will open the printer's Embedded Web Server. In here you may be able to find some options to adjust the power save settings.If the above does not work then this troubleshooting may assist you with the utility:Go to Applications, and if you have it open the Hewlett-Packard folder.Run HP Uninstaller to remove any existing software from you system.On the Mac go to the Apple icon and Sytem Preferences.Open Printers and Scanners.Hold down the Command key and click on the picture of your printer on the left.Click on Reset Printing System.Go to Applications and Utilities.Open Disk Utility.Click on Macintosh HD on the left.Click on Verify Disk Permissions. This should take about ten minutes.Click on Repair Disk Permissions. This should take about ten minutes.Restart your Mac.Plug in the USB cable between the printer and the router.Check for Product Updates on your Mac.Try running the tool again.If this resolves everything please let others know by clicking on Accept as Solution below my post.
I hope this helps and I hope you have a great day!

RE: X1 Carbon windows 7 Professional 64bit error message

Hi, Good Morning Everybody, I wish somebody here would advise me of my problem, Thanks.
Problem of Laptop
=================
[Message 01]
Hi, I bought X1 Carbon and found an error message when right click on the
1st page after startup. The error message reads
Microsoft Visual C++ Debug Library
Debug Assertion Failed!
Program: C:\Windows\System32\igfxsrvc.exe
File: D:\Program Files\Microsoft Visual Studio 9.0\VC\ATLMFC\INCLUDE\
atlcom.h
Line:2475
Expression: 0&& "Release called on a pointer that has already been
released"
For information on how your program can cause an assertion failure, see
the Visual C++ documentation on asserts.
(Press Retry to debug the application)
By right, right click should show the menu of View, Sort by, Refresh,
......Screen resolution, Gadgets, Personalize, but just cannot access
into the right click menu immediately. I have to wait more 3 minutes and
get out of the error message, then the right click menu appear. Why is
this so?
Please advise how to eliminate the message and have the right click menu
immediately. Should I bring the laptop to your service center for repair
or you can email me the steps to solve this problem.
Regards, Simon.
[Message 03]
hi, head of customer service,
below is a chat log i had online for your review. My concern is that
everybody work for a living - if u r the specialist in this field, i
respect that u can foresee what is going to happen if u tell somebody who
is not a specialist to do a specialist's job. U should be able to provide
advice n the possible outcome if things do not work out right, because it
is the end user who needs to face it n live with it. Take for example, if
the office building was on fire n the human instinct is to fight fire
first. But the workers do not have the proper knowledge of fire n also
not equipped with good PPE. This worker probably called the fire
department to report a fire, n at the same time the fire department
specialist at the other end of the line told that worker to
"troubleshoot" the fire without giving him the possible outcome if the
fire blown out of scale, what price this worker will have to pay.
My questions are:
a) what is the goal of having on-line chat service? Is it to resolve
simple technical issues, that's why an average IT worker can do the job?
b) if the end user already knew the problem he is facing and he is
expecting the best advice/solution from an expert rather than from an
average IT worker, would it be better for the end user to go straight to
email? Or straight to the service center?
c) Is there a team work spirit between your chat section and service
center? Is it going to take a long time to communicate among themselves
when they face the same problem real time - meaning they can't talk to
each other over the phone to resolve the same problem which the end user
is facing? If they can discuss over the phone, and possibly the service
center also share the same steps to resolve the problem but could not be
sure if something goes wrong, the os of the laptop need to be
re-installed. Then, the end user would not have to do a double job - to
chat online and go down to the service center only find out that it is
the same answer. Would it be better for the chat person to do the double
job internally for the end user?
[Hi, I bought X1 Carbon and found an error message when right click on the
1st page after startup. The error message reads
Microsoft Visual C++ Debug Library
Debug Assertion Failed!
Program: C:\Windows\System32\igfxsrvc.exe
File: D:\Program Files\Microsoft Visual Studio 9.0\VC\ATLMFC\INCLUDE\
atlcom.h
Line:2475
Expression: 0&& "Release called on a pointer that has already been
released"
For information on how your program can cause an assertion failure, see
the Visual C++ documentation on asserts.
(Press Retry to debug the application)
By right, right click should show the menu of View, Sort by, Refresh,
......Screen resolution, Gadgets, Personalize, but just cannot access
into the right click menu immediately. I have to wait more than 3 minutes and
get out of the error message, then the right click menu appear. Why is
this so?
Please advise how to eliminate the message and have the right click menu
immediately. Should I bring the laptop to your service center for repair
or you can email me the steps to solve this problem.
Regards, Simon.]
[Message 02]
[GoToAssist (10:11:53):
Connecting...
GoToAssist:
Dear Customer,
Thank you for contacting Lenovo and showing your interest in Lenovo
instant support program. I see you have a question on your product. I am
going to take few moments to review the information of your product and
message you back, right here, very soon. Please add this page to your
favorites, in case you get disconnected or close your browser, so you may
come back to this conversation.
Saraswati (10:12:25):
Thank you for contacting Lenovo Technical Support. My name is Saraswati.
I will be happy to assist you with this issue.
Saraswati (10:12:30):
Hello Simon.
Saraswati (10:12:35):
Good Morning.
Saraswati (10:14:47):
Simon , Have you checked with the steps I have provided in the earlier
session ?
SIMON (10:14:55):
hi, i just lost the session chatting with u. Can u show me all that again
here?
Saraswati (10:16:14):
Sure , Let me paste the conversation in this session.
Saraswati (10:17:26):
Saraswati (06:54:46):
Thank you for contacting Lenovo Technical Support. My name is Saraswati.
I will be happy to assist you with this issue.
Saraswati (06:54:59):
Hello Simon.
Saraswati (06:55:05):
Good morning.
Saraswati (06:55:35):
Please be connected to the session while I check with the query.
Saraswati (06:59:38):
It appears we may have been disconnected. Please respond so that I can
confirm our connection.
SIMON (07:00:27):
Hi, yes I can see u r writing....
Saraswati (07:00:58):
May I know the operating system installed? Windows Xp, Windows Vista,
Windows 7 or Windows 8? Is it 32-bit or 64-bit?
SIMON (07:02:20):
it's windows 7 64bit, the laptop is i5-3rd gen with 4gb ram
Saraswati (07:03:36):
http://www.intel.com/support/graphics/sb/cs-003927.htm please click on
the link to fix the issue.
Saraswati (07:05:49):
Let me help you with the latest graphics driver
Saraswati (07:08:14):
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/g1d625ww.exe
Intel HD Graphics Driver for Windows 7 (64-bit)
Saraswati (07:08:25):
Please install this link.
Saraswati (07:09:01):
Before installing uninstall the same form the device manager under the
display adapter option.
SIMON (07:10:21):
hi, the link u recommended mentioned something like reinstall graphics
drivers. I don't have the drivers n think it's pre-installed inside X1
Carbon. My concern is what is the worst case it could be if I execute the
link file n something goes wrong?
Saraswati (07:12:28):
Simaon , I would like to inform you that it is only the driver
reinstallation. It will hamper the system performance. It is the driver
provided with the preloaded OS. Hence it should not cause any issue.
SIMON (07:12:48):
btw, the os is windows 7 professional, hope i get it right.
Saraswati (07:13:09):
However please check by uninstalling and reinstalling the Microsoft
Visual C++ .
Saraswati (07:13:31):
Yes , I have provided the link for the Windows 7 OS 64 bit.
Saraswati (07:13:58):
Please check with the above steps. This should fix the issue.
Saraswati (07:16:32):
Please feel free to get back to us at any moment , we will resolve all
the issues related to the Lenovo Machine.
Saraswati (07:17:32):
It is been my pleasure assisting you with the issue.
SIMON (07:18:06):
ok, i take some time to do this, how to get back to u? do i need to
re-boot the laptop during the process? Please don't tell me i need to
re-install the os again if everything fail, because there r some
3rd-party software which i do not have the original serial
Saraswati (07:19:18):
Please reinstall the drivers from the driver link. Then restart the
machine and check if the issue persists.
Saraswati (07:19:57):
If still the issue persists then reinstall the Microsoft Visual C++.
Saraswati (07:20:12):
Hope this information is helpful
Saraswati (07:20:27):
Thank you for choosing Lenovo's chat Support. Kindly note, that there
will be a customer satisfaction survey once you close this chat session.
Please provide your valuable feedback for the chat session with me on a
rating scale between 0 to 10, where 9 to 10 being satisfied with the
service provided.
Saraswati (07:20:33):
Please note that the survey is only for current interaction. If you have
any comments or feedback, please mention same under customer comments.
Our team will take actions based on these comments to help us to serve
you better. Thanks for your understanding & Support.
Saraswati (07:20:44):
Thank you again for contacting Lenovo and have a great day Simon.
Saraswati (07:22:00):
You may close this chat session now.
SIMON (07:22:06):
hi, have any of your specialist face with this problem before?
Saraswati (07:23:22):
We donot remember , but we would have assisted in the similar manner.
Please check with the steps.
Saraswati (07:23:45):
Thank you for choosing Lenovo and have a great day ahead.
SIMON (07:24:48):
my worry is as i mentioned that i dont have the serials n it will be a
great price to pay for me if i miss some steps or something just not
right, then i would rather leave it as it is.
Saraswati (10:17:51):
Saraswati (07:25:43):
You can visit the nearest service center , so that the service technician
will help you further.
Saraswati (07:26:29):
Please contact on "800 6011 343 (Local number only) +603 8315 6856
(DID)"-- singapore
Saraswati (07:27:03):
Contact on the above numbers the concerned team will provide you the
address of the service center.
SIMON (07:27:55):
do u think the technician is more capable than any on-line chat engineers
because they can see the real problem of the laptop?
Saraswati (07:28:54):
The steps I have provided should fix the issue. If you need any further
assistance please visit the service center.
SIMON (07:30:37):
if they r just feedback to me with the possibilities i already perceived,
then it's not worth the trip for me to take time off work n travel
2 hours to n 2 hours fro your repair center.
SIMON (07:33:51):
My question is that "is it very difficult to comm between u and the
service technician side, then feedback to me online? so i dont have take
time off work n i also have to face my boss n it will look bad on me.
Please be more considerate?
Saraswati (07:36:02):
Simon , I understand your concern. Please check with the steps I have
provided and get back to us if the issue is not fixed. if you are
doubtful that the above steps might delete any of your files then you can
visit the service center , so that the service technician will check with
the issue personally.
Saraswati (07:36:47):
Thank you for choosing Lenovo and have a great day ahead Simon.
Saraswati (10:23:17):
Is there anything else that I can assist you with, at this moment ?
SIMON (10:23:26):
ok, I will take your advice n talk to some IT guys b4 i act on it, to be
sure that i made an informed decision. if i really have doubts, then i
would have to suffer in silence n just live with that error message for
the time being.
Saraswati (10:23:53):
Alright.
Saraswati (10:24:23):
Thank you for contacting Lenovo and have a great day Simon.
Saraswati (10:25:09):
You may close this chat session now.]
Regards, Simon.

Dev environment - i mean Visual Studio
But fist try to check in Event viewer if there's any error message that could help to find what the actual problem is.
Regards
Bartek

Why does captivate hang when it is closed in window 8.1 professional ? How is it solved?

Why does captivate hang when it is closed in window 8.1 professional ? How is it solved?

Hi,
Do you see the issue every time you close captivate or is it only in some scenarios? Does it show any error messages? What captivate version are you using (64 bit or 32 bit)? Can you provide some more information or screenshots which can help us reproduce the issue.
Tamish

Can I install Oracle 8.1.7 Enterprise Edition on Windows 2000 Professional

Sorry if this is a stupid question, but I have Windows 2000 professional edition loaded on my PC and I'm not sure what it allows. Can I load Oracle 8.1.7 Enterprise Edition of the database on this operating system, or do I need to load windows 2000 server software.
Thanks
Ryan

Its a problem with oracle and pentium 4 processors actually. The solution involves renaming or deleting the symcjit.dll in the 8i installation package after you've copied the whole Cd onto your HDD!
I've tried this and it install OK, with a few errors along the way, now I can't get the apache server working, nor on the 9i AS that I've installed as well. Let me know if you get anything useful please?
Michael.
[email protected]

Can I install Oracle 8.1.5 on Windows 2000 server or Windows 2000 professional

Hi,
Can I install Oracle 8.1.5 on a Windows 2000 server or Windows 2000 professional server?
Regards,
Zurvaan

Yes, of course. Both versions works but you have to be prepared for lots of RAM.

My hard drive failed and I can't afford the professional data recovery. Do I have any other options?

I have a 13" Early 2011 Macbook Pro. Last week the hard drive failed (for the second time), and when I took it to the Apple Store I was told it would cost $177 to replace the hard drive and the cables. I intend on going through with this and getting it fixed, however the man I talked to said I should hold on to it a little longer before giving it to them for repair in case I want to recover my data. When I researched how to recover the data, my answers mostly consisted of taking it to a professional to do so. I found a local authorized service provider who said they could do so, however I was told it would cost at least $400 to recover my data (possibly more depending on how much data there is to recover).
I can afford to pay $177 to fix the hard drive. I cannot, however, afford to pay an additional $400+ to get all of my data back. Yes I realize I should have backed my files up onto an external hard drive (I'm not the most computer-savvy person), but honestly, all I really need is my photos. When my hard drive was in the process of failing, I got a flash drive and put a lot of my files onto it so I would at least have some of them when I got my Macbook fixed. At this point, I can't even turn it on, so I am not able to go into iPhoto and get my pictures.
Is there any way I can do this myself? There is no way I can get this done professionally. I would love to be able to all of my data and files back, but if I can just get some that is better than nothing. Any help would be appreciated!

obesity wrote:
It was really empty. Clicked on, nothing.
But no prohibited signs, like these:
Get info on folder, zero kb. Just one user account on each mac.
I did navigate back several days prior to my Mac dying. Still nothing.
Sounds like it may have been excluded, or perhaps damaged.
Just for future reference, it's always a good idea to keep "secondary" backups. See #27 in Time Machine - Frequently Asked Questions for some suggestions.

HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
my bootcamp version in windows 7 is 2.1..

Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only

Creating Expandable fields in Abobe Acrobat 9.0 professional

Hello,
I am in the process of converting a standard PDF file to a interactive one. The problem I am having is that some of the fields need to be expandable to accommodate needs of the application. I am using Adobe Acrobat 9.0 to convert the standard form into a PDF file to PDF interactive file.
I have looked in Adobe Acrobat 9.0 Professional but I have not been able to find any documentation on how to expand the fields in the 9.0 Professional version.
Can you tell me if the LiveCycle Designer has the ability to expand fields and if so how can I set up the document to create the expanded fields. I have reviewed the help documents but it not very clear as to how to go about accomplishing this task.
I have attache the form that I like to expand.
I would really appreciate some guidance in this area
Thank you for your time
Gary

Hi,
Yes, LC has expandaple fields.
First you have to make your field multiline
Second - make it expand:
But you shaould remember tha field will be expanded only after you type smth in it and lost focus.
BR,
Paul Butenko

Error when starting Mercury Quicke Test Professional

Hello,
I am executing the QTP scripts through eCATT. During execution I got an error ' Error when starting Mercury Quick Test Professional'.
Does anybody knows how to resove this?
Thanks,
Mahantesh

Hi,
This is a common problem if scripting is disabled either on server or on ur sapgui client.
for enabling at server got rz11 tcode and enter sapgui/user_scripting profile and enable scripting there.
Refer my sdn weblogs which shows minimum config for QTP and ECATT and also how to create and run the scripts.
/people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
/people/community.user/blog/2007/01/15/integrating-ecatt-mercury-qtp-part-2
Please reward points.

Adobe Acrobat 7.0 Professional in Macbook Pro

After installation of Adobe Acrobat 7.0 Professional, running the software freezes the whole system. Updating of Adobe Acrobat Professional to version 7.07 doesn't help.. Full reinstallation of Mac OSX doesn't help. Running disk utility doesn't help either. Problems occurred after installing of Apple Security Update 2006-003(intel). Adobe Acrobat 7.0 Professional can run smoothly before installing Apple Security Update 2006-003(intel). Any comments?

Actually, there are two major hiccups out there. This link indicates Quicktime's update is the source of the inability to restart machines, fixed by deleting startup items, I believe.
http://www.macworld.com/news/2006/05/24/cs2quicktime/index.php
Accrobat's freezing the system is a result of the Security Update, fixed by rolling back to a pre-Security Update state using Archive & Install re-installation of the OS. Archive & Install does not erase your files or network settings.
Apple has released two products that fouled these systems. Bad Quality Assurance I think.

Time Machine Failure due to Adobe Acrobat Professional & Adobe Bridge CS3

Console reports failures with some files deep within the 2 folders..
Copy stage failed with error:11
Backup failed with error: 11
Every time.... so with Adobe Acrobat 8 Professional and Adobe Bridge Folders both on my exclude list... Time Machine marched on and finished back ups.
Hope this helps others with Adobe CS3 Packages installed.

Console reports failures with some files deep within the 2 folders..
Copy stage failed with error:11
Backup failed with error: 11
Every time.... so with Adobe Acrobat 8 Professional and Adobe Bridge Folders both on my exclude list... Time Machine marched on and finished back ups.
Hope this helps others with Adobe CS3 Packages installed.

Unable to download Flex Builder 3.0.2 Professional Eclipse Plug-in Trial

Since yesterday I am unable to download the Flex Builder plugin for eclipse, having tried all the combinations of Language/OS available for this product, browsers and two different PCs at my home.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=flex_eclipse
Using the link above the case is always the same no matter what browser/computer. After the "Download" button is pressed the website "freezes" for about 30 seconds, then it refreshes and soon an email message arrives with the title
"Helpful links and resources for your Flex Builder 3 Professional Trial".
Furthermore when I visit a link provided in the email Getting Started - Flex 3 Getting Started - Adobe Learning Resources, all the hyperlinks such as Watch, Full Tutorial, Download Project, PHP and Java will simply redirect me to the very same page (i.e. the one provided in this sentence).
I'd appreciate any help given on this matter, thanks.

Moving this discussion to the Flex Builder plug-in forum.

Issues with Creative Cloud/Flash Professional? (Performed system restore, Flash was removed...)

I had done a system restore to restore my computer the way it was 24 hours ago to fix some PC issues (couldn't uninstall some programs that I was going to reinstall to fix performance issues); I have three other Adobe programs of my computer that are still there, but where Flash was my most recent acquisition, it was removed when I performed the system restore. When I tried to re-download the program, CC still thinks Flash is still on my computer; I have uninstalled and reinstalled CC, gone through the program files for traces of Flash (didn't delete or alter anything, but also didn't find anything pertaining to Flash), deleted the Temp folder, attempted to download Flash Professional CC directly from the CC website, but none of these made any changes. Is there any way to manually download Flash, or "reset" CC to get it to notice Flash isn't on my computer anymore?

It still didn't help - it removed CC from my computer, and I reinstalled it, but I've already tried that. It still says Flash Professional CC is still there (I installed Flash CS6, too, as a substitute in the meantime, but I still need Flash CC). Flash Professional CC isn't on my computer anymore - it was deleted in a system restore, but CC says it's still there, so I can't reinstall it. Is there a direct download I can use?

DPS Professional o Enterprise

En vista de que no existe o no he visto un foro en español pongo aquí me pregunta en español pues es más fácil explicarme así que tratando de traducir.
Estoy a punto de suscribirme al DPS pero quiero saber si la contratar y pagar los 5490USD ya pudo hacer uso de las 5000 descargas de publicaciones incluidas o si debo comprar un paquete de 25000 descargas para activarlo, luego de esto puedo generar varios visores, es decir, tengo 3 publicaciones diferentes quisiera saber si en esta versión (professional) puedo hacer por ejemplo 3 visores distintos que muestren solo las publicaciones que le corresponden y compartir los folios. Todas mis publicaciones son gratuitas, y actualmente estoy solicitando la inscripción en la apple store en modo de Developer Enterprise pues las publicaciones son para uso y distribución interna en la organización.
Agradezco la información y respuesta o que me informen si hay algún foro en español.
Gracias.
Now translate by google =)
I'm about to subscribe to DPS but I want to know if the hiring and pay 5490USD and was able to usethe 5000 downloads of publications included or if I should buy a pack of 25000 downloads to activate it, after that I can generate multiple viewers, ie , I have 3 different publications would like to know ifthis version (professional) I can do for example 3 different viewers that show only the corresponding public and share the pages. All my publications are free, and am currently applying for enrollment in the apple store in Enterprise Developer mode because the publications are for internal use and distribution organization.

Hola de nuevo,
No sé si entiendo muy bien la primera cuestión.
Una descarga equivale a cada vez que un cliente consume un folio.
Con respecto a la segunda pregunta, es posible hacer tantas actualizaciones como se deseen con el modelo profesional pero el visor no es necesario modificarlo.
Se crea la primera vez y posteriormente cuando existan modificaciones de versión, de características, etc. El contenido es el que puede variar regularmente y puede ser cambiado, actualizado, etc.
Los paquetes de descargas son el número de folios que se consideran que serán vendidos en un año. No son descargas ilimitadas como en una web. El concepto es parecido a la edición en papel, si se piensa vender 10.000 ejemplares hay que prever hacer una tirada con, al menos, esa cantidad. En DPS funciona igual, si la previsión es vender 10.000 folios hay que contratar ese tramo de descargas.
Un saludo
El 25/04/2013, a las 23:02, tapatio1979 <[email protected]> escribió:
Re: DPS Professional o Enterprise
created by tapatio1979 in Digital Publishing Suite - View the full discussion
Muchisimas gracias por la otientación recibida.
abusando de su confianza tengo una duda más; una descarga equivale a: cada modificacion que puedo hacer en un visor multi folios por lo tanto si sonn 10 mil descargas son 10 mil actualizaciones o, cada descarga es un cliente que consume mi folio, por lo tanto son 10 mil clientes que consumirian mi app en un año.
otra pregunta que me surge de esto... con un visor multifolios yo puedo hacer todas las actualizaciones que se necesiten por dia gratis, ya que al ser un periodico hay noticias al momento que tendremos que actualizar el visor o son limitadas las moficicaciones? tardan mucho la actualizacion en apstore o es al momento? se que en una single edition tarda de 1 a dos semanas las actualizacion de la misma por eso tengo la duda...
creo que lo que no me queda claro es que es una descarga? que es lo que estoy pagando con los paquetes de descargas?, porque tenia la impresion de que las app son como las web, que son de acceso ilimitado, pero parece que no es asi?
le agradesco mucho su tiempo y paciencia en estas dudas, saludos y abrazos desde México... gracias
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5268131#5268131
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5268131#5268131
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5268131#5268131. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

AR 8 Professional

Similar Messages

Maybe you are looking for