AR Aging - FAGLL03 - BP Names not available in Layout Column Fields list

Hi friends,
For AR Aging we use FAGLL03 [G/L Account Line Items] for some listed AR GL Accounts with the Baseline Date as the basis to manually age in four periods at the end of Month closing. In the FAGLL03 extract, though BP Number under Vendor Column Name is available, I am wondering how I can get the BP First Name, Last Name and off course active addresses as well which I believe are equally important ingredients of the AR Reports. To populate the AR Report, I am now trying to use the Vendor BP Number but I am struggling to find a simple BP TCode that can extract me the First and Last name. So appreciate any quick tips on this.
Whereas we use another TCode ZARAGING specifically for Non-Staff AR GL Accounts of entities like UN Agencies, Governments & Dignitaries. The extract of this report comes with the name and as well calculated arrears days. I am not aware about the SAP technical team as why the Staff Advances AR GL Accounts cannot be tracked with the TCode ZARAGING.
Shall be grateful for comments and help.
Regards,
Javed @ UN RSC, Entebbe

Hi
I wonder if you need a report that display the vendor code and name and address as you mentioned above ..
you may depend on this report S_ALR_87012082 - Vendor Balances in Local Currency and add small modifications .. as below
open T-code S_ALR_87012082 and choose company code and in output control section click on vendor address check box. and then click onm configure bottom as below
and then in the configuration layout add city and street and region and then save the layout
Run the report and and the layout name in the configure field as shown in pic 1 and you will have the vendor code and address ..
Regards
Mahmoud EL Nady

Similar Messages

HT1338 After migration from MacBook 13' running OSX 10.6.8 to MacBook Pro 15' Retina OSX 10.8.2 using Migration assistant, the Bluetooth assistant mentions "name not available" and it cannot detect my Magic trackpad. There is no mention of any mishap.

I just migrated from MacBook 13' OSX 10.6.8 to MacBook Pro 15' Retina OSX 10.8.2 with the use of Migration Assistant. When attempting to install my Magic Trackpad, the Bluetooth Assistant mentions "name not available" so that the device cannot be detected. In have disconnected the firewall.Thanks for assistance.

Create a new, temporary admin account and see if you can set it up in that account.

Bluetooth turned off - Name not available

I have a no-name bluetooth usb device for my iMac, which installs fine without drivers etc.
However, every time I reboot or put the computer to sleep, the bluetooth device is set to OFF, and I cannot turn it on in the Bluetooth control panel (option grayed out with status "Name not available).
I can, however, get it to work by opening Bluetooth File Exchange, which then gives me the possibility to "Turn Bluetooth On" (the solution is from http://discussions.apple.com/thread.jspa?messageID=7854265).
How come it won't stay turned on?

Create a new, temporary admin account and see if you can set it up in that account.

Favorites exported from Internet Explorer are not available in Bookmarks drop down list as they should.

Favorites exported from Internet Explorer are not available in Bookmarks drop down list as they should. Where can I find them?

You can usually find the imported IE Favorites in a folder ("From Internet Explorer") at the bottom of the Bookmarks Menu folder (Bookmarks > Organize Bookmarks).
If you can't find them in the "From Internet Explorer" folder then try this:
Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export<br />
Import the HTML file in Firefox 3: Bookmarks > Organize Bookmarks > Import & Backup > Import HTML: From File
http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file")

This operation is not available for read only field 'Type MVF'

Hi All,
We are using OrderToCash PIP and we are on Siebel 8.1X.
While Synching the customer from Ebiz to Siebel facing the following issues:
Method 'WriteRecord' of business component 'Account' (integration component 'Account') for record with search specification '[Row Id] = "2d3434313239353"' returned the following error:"This operation is not available for read only field 'Type MVF'.(SBL-DAT-00402)"(SBL-EAI-04451)
Please suggest us what steps to be done in Siebel.
Thanks
Maanasa

First check the process why this is calling Account BC WriteRecord(). The field "Type MVF" might be read only and this sync process is trying to update this field which is read only. This is the reason for the error. Check the OM log / EAI Obj Manager Comp log (set log level to 5) and check.
Joseph Arul Dass

Smtp gateway name not available

hi folks
I use a cm2320nf mfp printer and like to email directly from the printer. The printer is installed in a small private network with a centro grande router
As gateway to send emails from the printer I use the same server as I use in the emails. When I ping this server, I get feedback.
When I send an email from the printer, I get the answer SMTP Server is not available.
How can I check wether the Networkcontroller in the printer is ok or not? I changed also the port numbers, used different SMTP Servers, nothing works.
And HP Switzerland is not reachable with phone.
Thanks for your help.
greets
Henryman

Have you installed the latest sound card driver?or,has it started after updating the driver.If it has started after updating the audio driver then roll back the driver.If not,try the latest driver.
[To Roll Back Driver:
Open Device Manager by clicking the Start button , clicking
Control Panel, clicking System and Security, and then, under
System, clicking Device Manager. If you're prompted for
an administrator password or confirmation, type the password or provide confirmation.‌
Double-click the category containing your device driver, and then double-click the name of the device that you want to restore to a previous driver version.
Click the Driver tab, and then click Roll Back Driver.]
S.Sengupta, Windows Entertainment and Connected Home MVP

"Finnish with street names" not available in the p...

Hi all! I just bought a Nokia 5230. I used the Nokia Ovi Suite to upload one additional voice to the phone: Finnish with street names (Suomi katujen nimillä). The upload was successful ( I even checked the memory card). However this voice option is not available on the phone in the Ovi Maps Settings (not for walking or driving). Help!
Solved!
Go to Solution.

I got it working by accident. I have the maps 3.0.4 beta and the finnish voices with street names work with it. I don't if it needs 3.0.4 beta or if the maps needs some kind of reset.
I had speeding camera problems with maps and installed the maps several times, see
/t5/Maps-Navigation-and-GPS/Nokia-5230-Safety-Cameras/td-p/679555
I checked the cities/diskcache/voices directory and the finnish_tts directory had contents, but I was unable choose it from the menus. There is some kind reset problem, when new data is downloaded.
I can't test if following works, but try it. If it does not work try reinstalling the software after you have deleted the cities-directory and qf file as described in the other post with link above.
Turn off the driving and walking guidance. Close the map application. Start the map application and use the navigation with a target. Close the navigation and maps application and restart the maps and see I you can find the driving navigation language finnish with street names (suomi - katujen nimillä).
If that does not help then try the delete/install procedure. I don't know if it works with 3.0.3 or if you need the 3.0.4 beta.
I think the maps application needs some kind of refresh or reset or factory settings function.
BTW, the swedish location names pronounced in finnish (like in motorway exits) are sometimes funny, Mikko's (the voice) swedish is even worse than mine.

Field 'Version' not available as a source field in COPA derivation

HI,
I don't see the field 'Version' as a source field in CO-PA derivations (KEDR). Wondering why it is not available for derivation when I can see it as one of the fixed characteristics. Am I missing something in configuration?
Thanks in advance.

HI Pradeep,
I am sorry for the delayed response. Please go through note 134889 for your query.
Best Regards,
Abhisek

Why some pages are not available offline in Safari reading list?

From time to time I experience surprises that some web pages are not available offline in reading list of Safari - link is stored, but content - no.
I was thinking that I was closing Safari too fast before pages downloaded.
But I rechecked - I gave safari enough time and it still not downloaded.
When internet connection is available pages are readable, but not in offline.
And related to issue:
Should I open Safari to allow to download page, when I add page to reading list from other applications by selecting "Add to reading list"?

YEs, it's totally frustrating... I'll never again just go along with an upgrade. After upgrading to IOS8 the reading list feature no longer works.
I even tried the factory reset, clearing out everything and making my iPad 2 like it was originally. And I didn't restore from backup either, afraid whatever bug it is would come back. I even installed iCab Mobile, and Readability... nothing works!
I Really, really, regret upgrading. I want my fully functioning IOS7 back!!
IS there any way to get IOS7 back, 'coz this IOS8 is for the birds?!

Date picker is not available in date/time field

Hi there,
I'm wondering while using a date/time field. Since I made some changes on this field the date picker (Arrow down right next to the field to show up a calendar) is no longer available. Has anybody got a clou what the problem might be or how I can bring the date picker back to this field.
Thanks in advance.
Best,
Maja.

Hi there,
I'm just wondering about the following settings/patterns:
As you can see this field is from the type "Date/Time Field". So far so good, but when I'm opening the dialog "Patterns", this dialog is just for a "Date Field" and not for a "Date/Time Field". No trouble so far, but the confusion thing is that the date picker is available in this field. Has anybody a clou how this is working? Or can anybody help me to convert a "Date/Time Field" to a normal "Date Field" which provides this date picker?
Thanks in advance and kind regards,
Maja

Why is 'Get track names' not available with my iTunes purchase?

I have just purchased a song from the iTunes store and it has been downloaded into my music folder. All is well so far. However, when i create a playlist and add the new song along with others from my music folder so that i can burn them to a CD the track name is not shown on the purchased track (all the others, yes but not the new one). If i look at 'get info' all of the information is shown but when i try to 'get the track name' i am told that iTunes can only get track names for tracks imported from iTunes...which is exactly where i got it from! What's going wrong. Why can't i get this track name? Any suggestions??? D/.

Hi,
Thanks very much for your reply. Although it was very good at explaining how the system works it doesn’t really help me to solve the problem.
I rip all my CD’s into iTunes and then make a copy of them to play in my car. It saves getting the originals lost or damaged and it also means that when I play them on my car audio system the track details are displayed; which is good.
With the disc I am trying to burn now most of the tracks were already ripped into iTunes and when interrogated they all display the track name, with the exception of the track I bought via iTunes store yesterday which although it shows the track info it does not show the track names. All I get is this message:
So, is there any other way I can import this track into my library so that when I add it to my playlist and burn to a CD it will show the track name? This is most of what is shown in track info:
I would say that when I look at the track in my music folder on my pc it is showing as an mp3 (MPEG layer 3 audio) file if this helps.
Thanks, coxmeister

Transformers: Age of Extinction rental not available in HD

Transformers: Age of Extinction doesn't appear to be available to rent in HD - any ideas why? Sure, I can buy it in HD, but I don't want to buy it.
Why make the rental option SD only? Really annoying.

bburke429 wrote:
Why is the new episode of true detective only available in SD on demand?
Apologies for the delay. It looks as though this was recently corrected and the HD version is also available. Thanks for your patience.

Data not available for a particular field - when exectuing report on MP

hai sdn,
I am executing a report on multiprovider where 3 ods's are linked.i'm getting data into all the fields except for one field.(sales doc type).I have checked all my linking in the identification also. i cross checked by using the Tcode : listcube and executed the report - here i'm getting the data but in the report i'm not getting.Can any one help me out with this.
Itz urgent..................
Thanks in advance.

Hi Sunita,
0DOC_TYPE has key and text in the (business explorer Display), but you are saying you have it as text and key. Make it inline with what is there in the info object definitione.
Note you have 2 options in Extras of the multiprovider.
1. Key and Text
2. Text and Key.
Hope this helps you.
Regards
Ananth

User name not displaying correctly in history fields in Sharepoint on Office365

The issue is for this one user on any form with history instead of the display name it shows his SharePoint user ID. Everywhere else for that user it shows correctly. For all other users they show correctly in the history as displayname
date/time comment. I know that somehow a field on his user got changed and we need to know what field it is under that user's account so either we can manually change it back or the correct procedure to correct this issue.
I can recreate it by simply creating a new list and select multiple lines of text and select append text to yes
Then in InfoPath select that list item and drag it on the page along with a submit button that writes the data and closes the webpage.
Then open a new item on that list with any other user it creates that item and shows their name time/date and the comment that they made. With the user that is having an issue it shows his user ID time/date and the comment.

Got it.

Artists with numbers at front of name not appearing at top of library list

When i transfered my iTunes library from an external hard drive to my new iMac, artists whose names begin with a number, i.e. 2 Live Crew, .38 Special etc., no longer appeared at the top of the list of artists in the music library. They did before on my previous iMac. They would appear alphabetically as to where they would be if the numbers were spelled out instead. Any ideas how to change them back?

ciccone39 wrote:
Any ideas how to change them back?
If you Get Info on any song, you'll see a Sorting pane. That will permit you to tell iTunes how to alphabetize the track. If the Artist field is "2 Live Crew", you might enter "AA 2 Live Crew" to sort it with the AA's — i.e., at the beginning of your library. You can then control-click the track and use "Apply Sort Fields..." to copy the sorting data to all other tracks by that artist.

AR Aging - FAGLL03 - BP Names not available in Layout Column Fields list

Similar Messages

Maybe you are looking for