AR/AP Customer line item report.
Hi Gurus,
how can i add the reference 3 field to the dynamic display of the FBL5N report .
Please advice
many thanks
Cecile
Hi Ekove,
I have just added this field in FBL5N, Dynamic selection:
1. so please just go to SE36
3. Extra menu to select Selection View, Click on copy and copy it from SAP standard to CUS
4. After copying SAP to Customer view, save it to your local package, then please click on next page to get the Table BSID, then double click on the table BSID,
Double Click on BSID
5. Then you can see the Table Fields/Nodes Fields of BSID table, Scroll down the pages to XREF3 field
6. Please inter 05, as shown above, against row XREF3, and select this field and press save button and save it, and exit,
7. Go to FBL5N and you can see the Reference 3 Field in Dynamic Selection of FLB5N.
I hope this will help you.
Regards
Javed
Similar Messages
-
Customer line item report with GL account display
Hi
Please guide some customer reports for the following
Client need a Customer Line item reports with Customer number and repective gl account for each line items.
for ex: Product A/c xxxxxx
To Sales A/c xxxxxx(recon A/c)
Thanks in advanceHi
1.FBL5N - Customer Line item Display (Customer Line item reports with Customer number )
2.FBL1N - Vendor Line item Display
3.FBL3N - General Ledger Line item Display
The sales entry will be
DR Customer - to view this entry FBL5N
CR Sales - to view this entry FBL3N
Hope this will be usefull -
Business Area wise Vendor & Customer Line item report
Hi
We are on SAP ECC 6. Can I get Business Area wise Vendor & Customer Line item report (as like FBL1N)
Regards
DebojyotiHi,
In FBL1N in dynamic selections you can give the business area as the selection parameter otherwise after execution of report with the help of layout you can set filters for business area.
Go to FAGLB03 give the vendor or customer reconciliation account along with business area. So after you execute the report you can choose vendor code and business area.
Check once it may help you
Regards,
Sankar -
Profit Center wise Vendor & Customer Line item report
Hi
We are on SAP ECC 6. Can I get Profit Center wise Vendor & Customer Line item report (as like FBL1N)
Regards
SandeepHi,
Please Try using "S_ALR_87013343 - Profit Center: Receivables " and "S_ALR_87013344 - Profit Center: Payables"
Reports
Best Regards,
Ravi Reddy -
Adding fileds to customer line items report (RFITEMAR)
Hi all,
I am modifying a customer line items report<b>(RFITEMAR).</b> I have to add two fields to a structure <b>(rfposxext).</b> I have completed this task. But the problem is how to populate these two fields. I am not able to find the select statements in this report to add these two fields. Any one can help me in this issue.....Thanks in advanceHi Kalyan
In the include "RFITEM_INC",
Routine "reate_performance_tables" exists where they are assigning "fposxext" to a field-symbol.
Add you fields after:
gd_pos_reduced-bukrs = <lfs_pos>-bukrs.
gd_pos_reduced-belnr = <lfs_pos>-belnr.
gd_pos_reduced-gjahr = <lfs_pos>-gjahr.
gd_pos_reduced-buzei = <lfs_pos>-buzei.
gd_pos_reduced-budat = <lfs_pos>-budat.
add:
gd_pos_reduced-xxx = <lfs_pos>-xxx.
regards,
Dharitree -
Noted Items in customer line item report
Hi Friends,
What is noted items? what is this use ?
i have seen in fbl5n screen ( customer line item report) in type selection.
please give u r reply on this i will assign points to you.
Thahnks
KSRHello
Noted items are single line items and basically payments due from the customer/vendors. These transactions do not affect the balances of the company.
Example of noted items are post dated cheques from customers/vendors.
Hope this helps.
Kavitha -
Grant number in customer line item report
Is it possible to bring in the grant number in the customer line item report, fbl5n? I tried expanding the fields in the report, but grant does not seem to be one of them.
Please help!!!
Thanks,
MJHi, check this Add new field in output of FBL1N
-
RE: COPA report and customer line item report not matching
Hi All,
COPA report and customer line item reports (fd10n) are not matching please let me know the reason.ok
-
Profit centre needs to be updated in Vendor and Customer line item reports
We are using ECC 6.
Profit centre is updating for vendor and customer line items in document level. But the same is to be reflected/updated in profit centre field in FBL1N and Reports.hi
Use this T codes you will get Profit center wise S_AC0_52000888 Paybles (vendor balances )
Tcode for Profit center wise receviables S_AC0_52000887 (customer balances )
Regards
Babu.k -
Tax Column on the Customer Line Item Report
Hi All
We need a report for AR that has the fields : Business Area, Customer, Document Type, Document Number, Clearing Document(if any), Currency, Posting date, Amount, tax amount, payment amount, due date, payment date..
I tried the standard report (FBL5n) but it doesnt have the fields 'tax amount' and 'cleared amounts' - so I tried to join the BSID
and BSAD table in a query - which again times out...
Is there another table I can map and or when using table(s) BSID and BSAD - what should be my join conditions..?
Thank you
RukshanaPlease search the forum before posting your question. This question has been asked several times.
BSET does not maintain the values with respect to the Line Items. So it is not possible to combine the values from BSET with line item reports. You'll have to write a custom (Z-Report) report to cater your needs.
Ravi. -
FBL5N --customer line item report
Dear all,
our clients want to see "customer name" in FBL5N report, vendor name in FBL1N by each line items when selecting all customers or vendors .
I wonder how you guys could make it possible to meet this requests?
Sincerely,
J.Dear Jimmy,
the Customer Name may be displayed in the Header Data via the following
Menu path in FBL5N : Settings > Display Variant > Current Header Rows.
The attached OSS note 181592 and 181697 explain more in detail how to
set up the headers.
Should you require the same to be on line item basis, I am sorry to
tell you that the same is not possible as per the standard, as
customer name is not saved on document line item tables. It can only
be visible in the header lines of FBL5N as explained.
For the line items, you can only see values of tables: BSIK, BSEG, BKPF,
BSED, PAYR, BSEGC and BSEC (the last one is only for one time vendors).
The table KNA1 is not a permitted table.
I hope this helps.
Mauri -
Sales order doc and item fields in customer line item report(FBL5N)
Hi All,
We have some billing documents and the accounting docs are created as well. However, in the FBL5N report, we are not able to display the sales order doc and item info even though the columns are avaliable in the layout.
Anyone can help?
Thanks,
TeoHiya,
You said you had the Order/Sales Doc field on the layout already.
Have you ever been able to view the Order? All I can view is the Billing Doc, and I would think that is logical, since the Order is not the immediately prceeding document for the Accounting Doc. The Accounting Doc is created off the Billing Doc and that is what is updated in BSEG. The Sales Order is not updated in BSEG (I haven't seen that happen).
In the event of a GR into stock posting, the Product Cost Collector or PO is the immediately preceeding document and hence updated in BSEG.
Cheers. -
Customer line items ...dispute case
Friends,
when i go into the customer line item report (FBL5N) and click on a record it opens up a page where we see a button for 'Dispute Case'and i went there and changed the reason for case and saved it and came back to the fbl5n customer line item screen and checked the record against which i changed the reason for case, but it didnt changed the reasion on the record but when i go into the record and try to view it in additional details it shows me the one i have made changes. not able to understand why it is not showing in the list of line items when it is showing inside the record details that it has been changed,even i did refreshed it . Our end user wants to see the changed reason code on the line items page wich is on the AR side when we change the reason for case on the dispute side.
its kind of urgent please put some light onto it, any help would be highly appreciable...
Thanks
Jaysounds like changing the ALE from system 1 to the other system.
However I doubt it will be that easy.
I believe that could should contact SAP SLO to work out the best route for data migration. -
Line item report with Customer number
Hi all,
I am facing the following issue:
I need a line item report to analyze an accrual account by customer.
Since the customer is not captured on the accrual account itself, but on the recon. account (which is not defined as line item display), I did not find a way to present the customer and the accrual on the same line.
I can always go to BSEG and vlookup and match by document number the accrual account and the customers from the customer recon. account, but I thought maybe someone has a better idea.
Thanks,
Yoel.If the recon account line items have al lthe info needed I'd suggest using a query (SQ01).
1. Create an Infoset in SQ02 with logical database "BRM". Choose the fields from BSEG that you need
2. Create the Query in SQ01 using that Infoset.
If you want to see individual line items, include the fields you want in the "basic list" of the query. If you want totals by customer, don't include anything in the basic list, but make a "statistics" with customer and amount.
Selections would habe to be made for account no and period. -
Offsetting account in Vendor, Customer and GL line item report
Hi All,
There is one requirement from our client. They want offsetting account in Vendor, Customer and GL line item report.(FBL1n, FBL3n and FBL5n).
As this field is there in selection screen in lay out setting but field coming as blank no off setting account is coming. It was coming in old SAP 4.7 system but same is not coming in ECC6.0.
Kindly let me know if any development is requirement, if yes than which tables we have refer for the same.
Thanks and Regards,
Abhinav SharmaHi Abhinav,
There is a SAP not and you can refer to that - SAP OSS note 112312
T.Code: FIBF
After entering in above T.code
Follow Path
Settings Products of a customer
Product : XXXX
Text : XXXX
Active : Tick it
Click on Back i.e. F3
Follow Path
Settings >P/S Function Modules > of a customer
Event: 00001650
Product: XXXX
Function Module: LINE_ITEMS_GET_GKONT
Now Go to FBL3N display of any account
After opening the account display click on Change Layout i.e. CTRL+ F8
And Select
Offsetting A/C Type & Offsetting A/C no.
Regards,
SAPFICO
Edited by: SAPFICO on Dec 1, 2010 8:26 AM
Maybe you are looking for
-
Getting *Not all values are bound* error while creating the VO
Hi When i create a VO with the following query i am getting ORA-01008: not all variables bound error after giving apply. The Query is: SELECT emp.full_name CSA, COUNT(*) "Total # disputes", SUM(rac.total_amount) "Total Dispute Amt", (SELECT COUNT(jtb
-
ITunes 10 will not run on Windows 7, 64 bit
I have upgraded to itunes 10 and now it will not run. In task manager the process is running but no programme. i uninstalled all itunes, quick step, bonjour and apple folders. Then tried a clean instal of itunes 10. Still didn't work. Uninstalled aga
-
''duplicate - locking - https://support.mozilla.com/en-US/questions/861730'' The only way I can describe the problem is, the word Firefox appears on top with a drop down arrow. The next line is the backward/forward button with the address bar. Next i
-
XMLImporter completes successfully but I don't see the personalization
Hi, I have created an OA Extension to add the charge account to the Notification Details page. I am now trying to export from source env. and import into target env. The extension part works fine but when I use XMLImporter to import the personalizati
-
Hi, I build a check with sapscript but i have a big problem. The amount is being printed below as it should. Anyone know the command to set the top margin in lines in SPAD transaction "Printer Initialization" action? I need to set the top margin but