AR CUSTOMER AGEING REPOrT

Hi All,
I have a requirement to get a report that will show all aged debtors for collection purpose after 90 days . The report S_ALR87012178 shows all that is 0-30, 30-60, 60-90. Is there a report just to show just one range
Regards
Me

Hello
In the same report, just give the following inputs at output control tab against the due date sorted list where you can give the 90 days, then report will come with upto 90 days and more than 90 days whatever u want.
I hope it will suffice your requirement.
Regards
Madhav

Similar Messages

SGD Exchange Rate Difference JE appears in Customer Aging Report

Dear Experts,
SAP Version: 8.81
Local Currency: SGD
We perform Exchange Rate Difference for a USD BP to calculate the unrealized gain/loss during month-end, JE created successfully.
Next, we go to Customer Aging Report and select this USD BP.
When i choose to view the Aging Report in Local Currency, the USD Invoice will appear in SGD + Exchange Rate Difference JE in SGD, the total balance can appear in SGD with no problem.
When i choose to view the Aging Report in BP Currency, the USD Invoice will appear in USD + Exchange Rate Difference JE in SGD, i can't see the total balance as it is appeared as xxxxx.
Above is the behaviour in 881.
Last time in SAP 2005, when i choose to view the Aging Report in BP Currency, the Exchange Rate Difference JE in SGD will not appear, therefore i can see the total balance in USD.
What is your opinion about the behavior in 881? Will you consider it as design or issue?
Thanks.
Regards,
Lay Chin

Dear all,
This problem is no longer there when upgrade to 881 Patch 08.
Regards,
Lay Chin

Asking Exchange rate at the time of Customer aging report

Dear All,
I am facing one problem, when I am asking customer aging report the system is asking to enter exchange rate.but at the time of vendor aging is working fine does not asking any exchange rate,this problem happens only one specific user, not for other users.
In other users it is working fine.Do we need to do any configuration for that user for working this customer aging report.
Please give solution as soon as possible
Thanks advance.
Regards
Komanduri.

We faced the same problem today.
Finally, we found out the user accidentally selected the currency which we didn't set the exchange rate in the aging report.
After the aging report is generated, we can change the currency in the upper left corner.
If we didn't set the rate of that currency, it will keep asking.
Even if we close the aging report and open again, it will still ask for that currency before it could generate the report
When we set the rate of that currency, it will not ask exchange rate again

Customer Aging Report Query (without invoices offset by incoming payment)

Hi All Experts,
May I know is there any field from JDT1 mention which invoices is already offset by the Incoming payment or AR Credit note? Because I do not want those invoices that already offset by incoming payment appear at the Customer Aging Report. Meaning, the data appear in the Customer Aging Report is only show those invoices that yet to pay by the customer. Kindly give some advise on it. Thanks a lot.
Thanks and regards,
Angie Ng

Hi David,
Thanks for your suggestion. I have try it, but all of my JDT1.IntrnMatch is in 0 value. Meaning in my situation it is none of any reconcilliation making. But from my SBO window, i manage to see that actually this incoming payment is pay for which invoices. Problem is it is difficult for me to do the possiblity logic that might be happen in my Customer Aging Report Query. Please give some advise that how to show only those invoices yet to pay? The current query will show all the data no matter the invoices or credit memo has been offset.
select OCRD.cardcode 'Supplier Code',OCRD.cardname 'Name',sysdeb 'Debit GBP',syscred 'Credit GBP',
case JDT1.transtype
when '13' then 'INV'
when '14' then 'AR CN'
when '24' then 'INCOMING'
else 'Other'
end 'Type',
Ref1,
fccurrency 'BP Currency',
CONVERT(VARCHAR(10), refdate, 103)'Posting Date' ,
CONVERT(VARCHAR(10), duedate, 103) 'Due Date',
CONVERT(VARCHAR(10), taxdate, 103) 'Doc Date' ,
CASE
when (DATEDIFF(dd,refdate,current_timestamp))+1 < 31
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "0-30 days",
case when ((datediff(dd,refdate,current_timestamp))+1 > 30
and (datediff(dd,refdate,current_timestamp))+1< 61)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "31 to 60 days",
case when ((datediff(dd,refdate,current_timestamp))+1 > 60
and (datediff(dd,refdate,current_timestamp))+1< 91)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "61 to 90 days",
CASE
when (DATEDIFF(dd,refdate,current_timestamp))+1 > 90
then
case
when syscred= 0 then sysdeb
when sysdeb= 0 then syscred * - 1
end
end "90 + days"
from JDT1,OCRD where JDT1.shortname = OCRD.cardcode and cardtype = 'c' and intrnmatch = '0'
ORDER BY OCRD.CARDCODE, taxdate

Customer Aging Report(without reconciled transaction)-what types of documents are considered?

Hi Friends,
As per my knowledge,Customer Aging Report consider only those documents(ar invoice,ar downpayment,incoming payment-payment on a/c,ar credit memo) which are open and showing balance due and standalone JE against Customer.
As I cross checked,I found those standalone JE where Customer and round off account are considered as debit,credit are not considered by 'Customer Aging report'.
So,I just want to know what are all the logic based on which SAP B1 standard report 'Customer Aging ' (without reconciled transaction ) consider the documents????

Which SAP B1 Version and Patch is under use at your end ?
There were issues in SAP B1 regarding reconcilliations in versions prior to 2007 series.
Samir Gandhi

Customer ageing report for fbl5n

hi all,
I want to develop an customer Ageing Report in abap to calculate the net due date which is similar to the Tcode fbl5n but the problem is functional consultant told me about this tcode and there is no such information regarding the specified tables which are to be used. I had searched in SDN also but i did not got the desired information.
regards,
karthik
Edited by: k.vinu.karthik on Jul 23, 2010 7:21 AM

Use the development tools available to you - the transaction and a sample account is all you need. Debug, ST05, SE30, etc....

Problem in Logic for Customer Ageing Report

Hi,
I am developing a Customer Ageing Report in which i am facing a problem i.e. i am taking tables BSID,BSAD in which i ham taking the open items first and then i am using for all entries in it on the open items and i had debugged it and data picking is correct .
But the MAJOR problem comes when the data is stored in the respective coloumns i.e. 0-30 ,31-60-61-90 etc.. Currently i am comparing the code with the Standard Report i.e.S_ALR_87012126 it is not coming accurate...
Is there any way to solve this problem ....
Edited by: nav009 on Jan 8, 2010 11:39 AM

Hi,
First you need to calculate the Due date of the Transaction with the help of FM 'NET_DUE_DATE_GET'.
Once you get the Due date calculate the value wf_nod as wf_nod = p_budat - wf_due_date where p_budat is the date on which you want to run the ageing report and wf_due_date is due date of the transaction.
once you get this wf_nod write the following logic :
      IF wf_nod < 0.
        wa_tab-ndue = wa_data-dmbtr.
      ELSE.
        IF wf_nod <= pnod1.
          wa_tab-amt1 = wa_data-dmbtr.
        ELSE.
          IF wf_nod > pnod1 AND wf_nod <= pnod2.
            wa_tab-amt2 = wa_data-dmbtr.
          ELSE.
            IF wf_nod > pnod2 AND wf_nod <= pnod3.
              wa_tab-amt3 = wa_data-dmbtr.
            ELSE.
              IF wf_nod > pnod3 AND wf_nod <= pnod4.
                wa_tab-amt4 = wa_data-dmbtr.
              ELSE.
                IF wf_nod > pnod4 AND wf_nod <= pnod5.
                  wa_tab-amt5 = wa_data-dmbtr.
                ELSE.
                  IF wf_nod > pnod5.
                    wa_tab-amt6 = wa_data-dmbtr.
                  ENDIF.
                ENDIF.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDIF.
Collect wa_tab into it_tab.
where pnod1.......pnod5 are the aging period as 30,60,90,180,365 etc.
by this you will get correct results.
Please get back to me if you need some more help on this.
Regards,
Nikhil

Customer Aging Report

Hi all,
Our client requires aging report
for a customer in the following format
Customer Code,Name,0-30 Days,31-60 days,61-90 days,
91-120 days,121-150 days,151-180 days,180 + above days,Row Total (all days).
Condition: By Aging date
Thanks
Jeyakanthan

Hi Jeyakanthan,
SAP Business One displays the relevant open receivables in four columns for the time interval for customer aging report.
The fourth column includes open receivables for the days/months/periods prior to the first three columns. For more information please refer to the explanation for 'Time Intervals' field in Online help.
Based on the testing in 2007 version, it is improved that there is one more column added there, which means if you set 'Time Intervals' as month, you may get five columns in aging report, the first four columns are for 4 months and the last column shows open receivables for the months prior to the first four columns.
Regards,
Van Xue
SAP Business One Forums Team

Customer Aging Report. Pl help me in this issue.

Problem in Customer Aging Report.
1. No concrete solution given to take project wise, bill wise. 2. Opening dues break up - project wise. Bill wise. 3. Aging days not able to select the required interval. Only standard intervals are available. 4. How to find the exact payment payable/ receivable for an vendor/customer.

Hi Arun...........
You can get the invoice wise aging. Once you run aging report you have to only double click on the sequence no grid.
Hope this will solve the issue........
Regards,
Rahul

Customer ageing report

Dear All,
I checked in SCN and did not find answer for my query so posting here.
This is with reference to customer ageing report,
we are developing z report for customer ageing since we could not get customer specific report either through standard transaction or FDI4/FDI0 level.
So, we are developing Z report for customer ageing.
My doubt is, case where Customer is also a vendor
in BSID table we can get customer open item balances. which means due and not due balances. This is clear.
but how to bring Net off balances (customer open items - vendor open items) into ageing report like (0-30, 31-60, 61-90, 91-120 & >120).
Kindly share the ideas to get net off balances into ageing.
also let me know how would I confirm that my zreport showing the correct values.
Thanks in advance.
Regards,
Ganesh

In simple terminology ageing analysis is
Listing of amounts due to the business (by debtors) by splitting them into different categories based on how old the debts are.
In SAP you could view the Ageing reports of Debtors in the easy access. The path being
Financial Accounting-aAccounts Receivable-Information System-Reports for Accounts ReceivableAccounting-Customer Balances
Thanks & Regards
phaneendra

Customer aging report in Sales Order PLD

My customer would like to have customer aging report to be displayed in Sales order PLD. kindly let me know whether it is possible through system variables. if so, please let me know the system variable values for diferrent aging periods like 0-30, 30-60, 60-120, and 120+. etc. Pls suggest any other solution if this is not workable.

Hi Rajesh
The system variables exposed for the ageing report will not be available for the sales order report. You will need to create multiple fields on the PLD to achieve this. The best would be to use the JDT1 table and Select Debit minus Credit columns. Then add fields with dates as rules and apply each ageing block to each date period (rule) as a sum of debit - credit. Unfortunately SAP Business One does not have a balance table where balances are stored, and they are always calculated on the fly from the journal tables. The alternative is to add a User Defined Table and store the Ageing in this table, and then simply join this table to the BP for the sales order in the PLD. Updating the table will have to be done possibly with a stored procedure.
Kind regards
Peter Juby

Regarding Customer ageing report logic in R/3.

Dear
Experts
i have requirement to develop customer ageing report logic for input 30,60,90,180,360
i don' t have any idea hw can i take these values in input& hw can i caluclate the values
i searched in sdn, i did n't get any suitable answer..
Regards
Spandana

Hello,
Go to transaction code FDI4
Select Form Type RFFRRD20 Line item analysis
Give your form name and description
Structure (Two axis) - as defaulted
Click on Create
You will have lead column
Delete the rows 2, 3 and 4
Double click on column 1
Enter the customer numbers from 1 to 999999
First column double click (A)
Slelect following values
Due date analysis 1
Days for net due date 0 to 30
Give the short name, medium name and long text for the column.
Repeat this step in next columns like 31 to 60, 61 to 90, 91 to 120 and 121 to 99999 days etc in other columns and select due date analysis 1. (B,C,D,E)
Create one more column by way of formula. To create a new column you need to double click on blue line. Put formula add all five columns you have created above. (F = ABCDE)
You prepare one more column with
Due date analysis 2 (G)
Now you prepare one more column add (F+G) = This will be total open items = over due and not due.
Now go to FDI1 and prepare a report - assign the form created in FDI4 to the report.
Characteristics you need to select are
Account Type (Select Account Type as D for customers)
Currency
Customer
Document Type
Special G/L Ind
Company Code
Change the output types and options according to your requirement.
Refer FDI2 and FDI3 for other standard reports created.
Refer FDI5 and FDI6 for other standard forms created.
Save your report and execute.
Regards,
Ravi

Customer Aging Report totals and detail is different

Hi Experts,
I have a customer aging report and i find something odd with the total column in local currency and System Currency.
for Example :
Customer _______Total_______Future Remit_______0-30________31-60________61-90________90+
____A100 _______1000_____________ 300________200_________100__________200_________300
Total Column doesn't show the correct value.
It should be 300200100200300 = 1100 and it's only show 1000
and if i click at the row number to show the details, the total on the detail form shows the correct value
It is not happening in FC currency
Anyone has any idea?
Regards,
David

Hi,
I'm using SBO 2005A PL 46, the BP currency is USD and the Local Curr is IDR.
Thanks

Customer Aging Report to Include Credit Memos

Hi,
I need a customer aging report that will also include credit memos. This is not available with the system report, but when I write a query it will not reference the customer's account but only the documents in the system. How do I create an A/R aging report that includes credit memos off of the account balance?
Thanks!
Emily

Hi, Emily,
I have made such a Crystal report; actually I have 2 versions;
one is purely made in Crystal report: if your credit memos are copied from AR Invoice totally.
another is made with stored procedure and Crystal report, that includes AR Invoice Credit memo, and internal reconciliation.
Which one you need?
Suppose you need the former one, it's easier: just link tables: OINV - INV1 - RIN1;
The join keys: OINV to INV1 is 'Docentry'; INV1 to RIN1 is "inv1.docentry = rin1.baseentry and inv1.linenum = rin1.baseline". and also "Rin1.basetype = '13' and inv1.targettype = '14'.
Hope this helps.
~Michelle

Customer aging report - receipts also displayed

hi all,
Customer aging report is showing all outstandings &
also receipts from customer,
we want only customer outstanding in intervals of days ?
Jeyakanthan

Hi Jeyakanthan,
I take it you are using a version prior to 2007.
When you run your ageing report by journal entries, B1 will show you the full amount as due for all partially paid invoices & also, in another row, the actual partial payment. This is due to the 2 different reconciliation engines. You need to manually reconcile the invoices with the partial payments, then they will no longer appear in the ageing by journal entry.
To determine which payments belong to which invoice, you could run the report by marketing documents. There B1 will show you the remaining outstanding amounts only, from which you can deduct the payment(s) & thence reconcile the correct documents.
As a rule, SAP recommends to only run the ageing reports by journal entry.
If you are looking for more info on reconciliation, please have a look at the IRU landing page:
http://service.sap.com/~sapidb/011000358700000380562007E
All the best,
Kerstin

System (AGE3) 'Customer Aging Report' does not print BP Ref. No.

Hi Experts!
I have a question about the PLD for the Customer Aging Report (AGE3 = Collection Report). This system print layout does not print the BP Ref. No. in that field.
And when I went into the PLD, that field (and the other repetitive fields) are text fields. How do I get the BP Ref. No. to print in the field?
Any help would be greatly appreciated.
Marli

Hi Marli,
If the PLD is of System report , then you have to heck that in ocrd table what is the field name of BP ref no. and try to convert that text field into database field and give the ref of ocrd BP ref no.
However the chnces of working fine for the above sol. is very low as we will not prefer to change the system report.
You should go for QLD or Crystal report for that .
Rgds,
Premraj

AR CUSTOMER AGEING REPOrT

Similar Messages

Maybe you are looking for