AR Reserve Invoice - Posting date

Hi,
I have a customer who really would like to address the issue with the posting date on AR Reserve Invoices, because they think this field should be open for editing until the invoice has been paid.
Is there a good reason for why the posting date field is closed after adding the document?
And is there a possibility that this field can be opened for editing in a future version?
Best regards,
Lena-Marie D. Tørresvold

Hi Lena.......
The reason might be based on Posting Date the Payment is linked because Payment will be done as per the payment terms and payment terms ultimately linked with Document Date.
And its preferable too as accounting is puerly done on the basis of date which is one of the most important factor from Financial Reports point of view.
So if you think to edit the dates of docs when it si added then it is unncessary as it wont make any sense for finance reports........
Hope you got the logic....
Regards,
Rahul

Similar Messages

How To validate Excise Invoice Posting date(J1iin) equals to Billing Date

Hi Experts
I have required to validate Excise invoice Posting Date(J1iin) should be equal to Biiling date . Can anyone suggest me which user exit i will use for it.
Waiting 4 reply.
Regards
Prateek

using FM J_1I7_USEREXIT_EXCISE_BEF_SAVE

GRN Posting Date in A/P Invoice posting date...

Dear Experts,
Can anybody help me to get the GRN Posting Date Automatically in A/P Invoice posting date while copying !.
Thanks in Advance,
Bhoopathi.K

Dear Nagarajan,
The reason for my requirement follows below,
1. I need the GRNI account to be null on everyday basis.
2.Whenever I run P&L, the Purchase Offset account and Purchase Analysis itemwise report should match and in this case it will.
3.Because of some In-house disciplinary things .
Thanks,
Bhoopathi.K

VAT Rate is copied from Base Document, not taken from Invoice Posting Date

Hi,
With the recent VAT Rate change in the UK, the following issue has come to light.
If I have a sales order or delivery created in November 2008 the VAT rate is 17.5%, which is correct.
If I then invoice that document in December 2008, the VAT rate should be 15% in line with the VAT Setup screens.
However, the VAT rate on the new document remains at 17.5% even if the user changes the posting date. The VAT Rate is only corrected if the user changes the VAT rate on the transaction line to a completely seperate rate, and then back again.
For documents with many lines this is impractical. I have several customers who have complained about this who want reassurance that the issue will be resolved before the next VAT rate change in 12 months.
Regards

Please check the Note -> 1481238

Excise invoice posting date acepting in previous date of commercial invoice

Dear All,
I have a dount,here at our client when we create commercial invoice todays date and while creating excise invoice in posting field we enter yesterdays date it is allowing to post.
I per my knowledge it should not be like this.Please guide me how can i block this posting in back date.And confirm me wheter it legally allowable and if it is in what scenario.
Thanks in advance.
deepti

Dear Deepti
It should not ne done because it distrubs the reports . When it is done during a month it is not a problem. But when it is done in the month end it leads to a problem. For eg If you create a commercial on 02.02.2008 and created a invoice on 31.01.2008 then the Accounting Entries get wrong. In this the Customer gets debited in the month of Febraury and the Sale and VAT gets it credited But in the excise gets debited in the month of January and Payable in the month of January.
Regards
Jyotsana

Uploading customer invoice posting data from a flatfile(oracle) into FB01

Hi,
      i have to upload the customer invoice data from a flat file and post into FB01.
      if any body worked with this plz send me the sample code regarding customer invoice.i have the following fields
BLDAT-BKPF
BLART-BKPF
BUKRS-BKPF
BUDAT-BKPF
MONAT-BKPF
WAERS-BKPF
BELNR-BKPF
XBLNR-BKPF
BKTXT-BKPF
GSBER-BSEG
BSCHL-BSEG
HKONT-BSEG     Gl Account|
DMBTR-BSEG     Amount     |
HKONT-BSEG     GL Account
DMBTR-BSEG     amount
HKONT-BSEG
DMBTR-BSEG
HKONT-BSEG
DMBTR-BSEG
HKONT-BSEG
DMBTR-BSEG
HKONT-BSEG
DMBTR-BSEG
HKONT-BSEG
DMBTR-BSEG
HKONT-BSEG
DMBTR-BSEG
HKONT-BSEG
DMBTR-BSEG
HKONT-BSEG
DMBTR-BSEG
KOSTL-BSEG
PRCTR
SGTXT     Text
BSCHL-BSEG
LIFNR-BSEG     Vendor account(Employee No.)
                PART II
SAP TABLE     Field description
XBLNR-BKPF     Reference
GSBER-BSEG     Business Area
BLDAT-BKPF     Document Date
KUNNR-KNA1     Cusomer Number
AUFNR-COBL     Order Number
HKONT-BSEG     Gl Account
DMBTR-BSEG     Amount
for tax, insurace ,freight etc.,    a seperate Gl account is created.
regards
veni

hi,
use report rfbibl00:
1) look documentation with se38
2) use structures bgr00, bbkpf, bbseg
3) look sample-prg RFBIBLT0
A.
Message was edited by:
        Andreas Mann

Posting date changes when I approved a Funds reservation

Hello experts,
When I approved a Fund reservation in SAP business workplace, system creates a Accounting document with a different posting date.
I give you an example:
Funds reservation:
Document number: 1101000099
Document type: R0
Document date: 01.08.2011 (day.month.year)
Posting date: 04.08.2011 (day.month.year)
Accounting document
Document number: 1000000916
Fiscal year: 2011
Period: 08
Doc. Date: 01.08.2011 (day.month.year)
Posting date: 29.08.2011 <<<----
?¿?¿?¿? Why sy-datum ??
Maybe a SAP error ?? Do you know where SAP (abap code) determine posting date??
I need posting date of accounting document is equal to posting date of funds reservation.
Note: If I created a funds reservation with posting date 31.12.2011 and then I approve it, system creates accounting document with posting date correct! (31.12.2011)
A lot of thanks in advance.
Best regards,
djlu.
Edited by: djlu on Aug 30, 2011 12:27 PM
Edited by: djlu on Aug 30, 2011 12:45 PM
Edited by: djlu on Aug 30, 2011 12:49 PM

Hello gautam maini,
First of all a lot of thanks for your quick answer.
My BO is ZFMRE a custom objecto of FMRE.
Methods: I don't know which method exactly but I think zfmre.Approve_1 or zfmre.Approve (standard methods)
Workflow: WS90200003 / WS99800014
SAP Version: SAP ECC 6.0
Sorry but I am not a workflow expert.
Please give me your suggestions.
Thank you in advance.
Best regards.
djlu.

Exchange Rate date for Invoice posting for Slovak Republic

Hi,
We have a requirement wherein for Slovak Republic, Invoice should pick up ( at the time of Invoice Posting) the exchange rate from the Delivery Note date and not the Invoice Posting Date. This is applicable for all vendors which have a Slovak Republic VAT Registration number. I suppose this is some country specific requirement for Slovak Reublic.
Do we have to apply some Notes to achieve this functionality. Any pointers to this issue is highly appreciated.
Regards
Anupam

SO VBRK-KURRF (exchange rate for FI) is taken from "pricing date" in standard?
Are you 100% sure? :
FIrst of all: there is no pricing date (PRSDT) on invoice header level
Second: I`ve got information from FI that VBRK-KURRF is taken from posting (billing date) VBRK-FKDAT
I have found also programs, there is provided folloving calculation formula:
LV60AA90
Currency conversion (WAVWR is in local currency so far)
        ACTDATE = VBRK-KURRF_DAT.
        IF ACTDATE IS INITIAL.
          ACTDATE = VBRP-PRSDT.
        ENDIF.
        DA_WAVWR_HW = VBRP-WAVWR.
        DA_WAVWR_KW00 = WAVWR_KW00.
        DA_WAVWR_PCVP = WAVWR_PCVP.
LV60A036
Determine date
    IF vbrk-kurrf_dat IS INITIAL.
      ld_kurrf_dat = vbrk-fkdat.
    ELSE.
      ld_kurrf_dat = vbrk-kurrf_dat.
    endif.
So what is the verdict?

Posting date on sales order to invoice

hi all,
I hope any can help, i need pass the posting date from sales order to an invoice,
this is after made an sales order this sales order convert to invoice so i need the same posting date i have on sales order in the invoice.
thnks for the help
Humberto

Another way of using is going deeper and modifying the SP_SBO_TransactionNotice store procedure to pull up the sales order posting date and passing that value to the invoice posting date.
I know that this answer belongs in the SDK section of the forum, but its also another way of doing it; besides formatted searches have there restriction and it not always work in certain circunstances like using copy to.
Regards,
WB

Issue In posting date and Due Date

Hello All,
my client is creating a GRPO and manually changing the Posting, And doc date. Then by using Copy to utility he is creating A/P Invoices
There system automatically shows the Posting date, Document Date as of current date(That is what system behavior is ). But now he wants that system should pick all his dates from Base doc i.e GRPO
So i want to know that is this possible through some query or FMS
if yes then please suggest me for the same
Regards,
Bhushan

Hi,
I don't have $38.10.number in my query. Where did you get this field?
please follow below steps:
1. Run above query in generator. Sure it gives an error message and ignore this message.
2. save it under query manager
3. Assign this FMS at AP invoice posting date and set auto refresh when customer vendor refer is changed.
Thanks & Regards,
Nagarajan

Invoice posting not permissible after posting MIGO

Dear Experts
I don't want to make MIGO ( Goods Receipt ) after making Invoice (MIRO) date.
Suggest me steps for the same.
Regards
viral.

Hi Viral,
You need to incorporate the logic of "System should not allow while doing the MIRO before the Posting date of GRN posting date in the enhancement"
The logic is to take the GR document number from the table DRSEG-LFBNR - Document No. of a Reference Document, retreive the GR posting date from table MKPF, compare the same with the Invoice Posting date. if the invoicing posting date is smaller than the GR posting date then give the error message as "System should not allow while doing the MIRO before the Posting date of GRN posting date" if it is not then no message.This will be applicable only if GR-Based IV is flagged in the PO line item or else the invoices without GR's will not be posted.
You will need an ABAPer to develop the same in the sytem.
U may write the above code in
Exit Function Module : EXIT_SAPLMRMP_010
Include : ZXM08U16
Regards,
Kiran

GR/IR posting date

Dear Experts,
I have one scenario i want to restrict no body can make the VIV before GR posting date .
Suppose
Gr date is 03.04.2010
VIV date is 31.03.2010
Regards
Aamir

HI,
You need to incorporate the logic of "System should not allow while doing the MIRO before the Posting date of GRN posting date in the enhancement"
The logic is to take the GR document number from the table DRSEG-LFBNR - Document No. of a Reference Document,
retreive the GR posting date from table MKPF, compare the same with the Invoice Posting date. if the invoicing posting date is smaller than the GR posting date then give the error message as "System should not allow while doing the MIRO before the Posting date of GRN posting date" if it is not then no message.This will be applicable only if GR-Based IV is flagged in the PO line item or else the invoices without GR's will not be posted.
You will need an ABAPER to develop the same in the sytem
Regards
KK

INVOIC01 IDoc - Map posting date

I have a problem with the mapping of the posting date in an incoming INVOIC01 IDoc.
Although the posting date is mapped on segment E1EDK03 with IDDAT = '015' (Invoice posting date (Invoice tax point date)), the resulting invoice has the system date as posting date.
Is it possible to post an incoming (fincancial or logistics) INVOIC01 IDoc on a specific posting date?
Kind regards
Frank

I solved the problem by debugging the FMs IDOC_INPUT_INVOIC_FI and IDOC_INPUT_INVOIC_MRM.
For the FI invoice: Qualifier 026 (billing date) has to be used.
For the MM invoice: The document date (qualifier 012) is used as posting date.

Posting date in J1IEX with option R07 - Internal Excise Invoice

Hi CIN guys,
I have one requirement with respect to J1IEX transaction -> Post -> R07 - Internal Excise Invoice.
In J1IEX transaction, there is a field called "Posting Date" available in Header as editable under the tab "Excise Invoice", results user can change the date based on open financial period (Period open and close has been done through OB52).
I want put validiation in the field "Posting date" by either make the field as Display or prevent entry of pastdate eventhough the period is in open.
My question is that Is there any screen settings are available to make the field as display? If so and make the field as display, what would be the impact? Is there any otherway (user exit, badi ...) to control this?
Please reply.
Thanks in advance
Ravikumar S

hi
check whether any std user exit there for this process and code as per your logic and activate it

Posting Date of Cancelled Invoice Document MR8M

Hi, there is a invoice document posted in the system (using MIRO) on 3/31/09, when i reverse this document on 4/14/09 using MR8M, the canceled document has a posting date of 3/31/09 (same as the original document) instead of 4/14/09. Can someone tell me how to get the posting date to 4/14/09. Both 3/31/09 and 4/14/09 are in the same fiscal year and period.
Thanks

Hi,it's depend on Reversal reason!You'd to customize it

AR Reserve Invoice - Posting date

Similar Messages

Maybe you are looking for