Arabic in network reports

upgraded from 5.1 to 5.5. now, when i try to computer reports, after entering the computer password i'm taken to a log-in page with the TEXT IN ARABIC! The URL is about 500 characters long, starting with https://services.linksys.com/lela_reporting/lela_reporting.jsp.... entering my email and password (guessing at what the arabic is asking for) doesn't seem to work. this happens from both of the computers on my network that have upgraded to 5.5 and occurs when asking for reports on computers running either 5.5 and 5.1.
OS Vista 32-bit
Router - Linksys WRT54G

Looks like a bug, are you in the USA?
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

Similar Messages

Summary Network Report Generation Error

I am running SBS 2011 and have recently stopped getting the Network Summary Reports. When I go into the log I see the following error:
2014-05-12T03:15:00.245868 : ***************** Starting GenerateMonitoringReport task... *****************
2014-05-12T03:15:00.246868 : Generating Summary Network Report...
System.NullReferenceException: Object reference not set to an instance of an object.
   at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.FirewallInformation.GetFirewallStatusFromMonitoringStore(String computerName)
   at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.ReportGenerator.GenerateSecuritySectionSecurityCenterPart(ReportSection section)
   at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.ReportGenerator.GenerateSecuritySection()
   at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.ReportGenerator.GenerateReport(ReportConfiguration config)
   at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.GenerateReportTask.Run()
   at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.SBSTask.StartTheTaskStub()
This error happens every time the report is generated. Any help resolving this would be much appreciated.

Hi Rory Christian,
Would you please let me confirm whether it’s SBS 2011 Essentials or SBS 2011 Standard?
If it’s SBS 2011 Essentials, and you have installed Update Rollup 2. Please use following Hotfix and check
if help you to solve this issue.
You receive the warning "Computer Monitoring Error"
in Windows Small Business Server 2011 Essentials after you install Update Rollup 2
If this issue still persists or it’s SBS 2011 Standard, please run
SBS BPA and fix all that it can find. Then monitor the result. Meanwhile, please open Event Viewer and check if you can find more clues.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Network Report Changed

Hi All,
Cisco changed the way that Network Reports are done. No longer is the actual report Emailed. No Longer can you checked previous Email Reports. You can only check the current information.
If you like Network Magic and are unhappy about the current Network Reports, you need to speak up and call Customer Service and / or post your feelings here. Or you can just accept the changes.
I have no children, and really don't need Network Reports. But if you have children and want to check older Reports, you need to speak out and not remain silent.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

A few thoughts :
- I like the format of the new reports, but I don't need an email every day with the link when I could (theoretically) get to it via the NM Tasks section. Currently this functionality seems to be broken and should be modified to provide the same link as the new emails.
- The benefit of the (previous) daily email report for me was to have an overview of the links followed, allowing a final check for potential malware via the combination GMail/Finjan.
My ideal would therefore be a combination of old and new, and the chance to set the email report frequency to something other than daily (weekly would be optimum for me).
Perhaps we can collate the user requirements via this thread?
Simon T.

SBS2011 Network Reports failing to email

Hello all,
I have a number of SBS2011 machines that are failing to send the daily network reports.
I’ve done some troubleshooting already and cannot resolve it, thus this post.
Neither the scheduled report nor the “generate and e-mail report” method work.
When I try the “generate and e-mail”option, I get the error “An error has occurred while sending this report. As a result, some of the recipients will not receive this report in e-mail”
The following error is also logged in the file C:\Program Files\Windows Small Business Server\Logs\MonitoringServiceLogs\DataServiceComponents.log
[16568] 141022.113000.4756: Messaging: MessagingTaskException: The operation couldn't be performed because object 'NT AUTHORITY\SYSTEM' couldn't be found on SBS.DOMAIN.local'. - Error# (80006)
I’ve read various other posts in this forum and only one post was close but it wasn’t resolved despite someone marking it as resolved after suggesting to run SBS BPA. BPA has been run on this server incidentally and it’s clean. I’ve also followed
the instructions to manually repair the reporting services from the Microsoft blog. Re-created ok but still no joy.
The error message from the DataServiceComponents.log suggests it’s a permissions issue but I don’t know how to resolve it.
I read that the SBSMonAcct account must be enabled for these reports to work yet one of the servers that we maintain that IS sending these reports via email to external addresses has this account disabled (yet the email still comes from
[email protected]). So I am thinking that this account is irrelevant? It was disabled by default on our internal SBS and I tried enabling it but still no joy.
Anyone got any suggestions? Much appreciated.

Hi, apologies for the late reply, I've finally got time to follow this up.
I've unmarked Susan's reply as answer until I have actually fixed it. The linked info seems relevant but isn't hitting it on the head.
Reports cannot be generated manually, they fail whether manual or scheduled. The receive connectors appear fine and are configured correctly. The "Default SERVERNAME"
receive connector is still there and is untouched since the initial fresh install of this server. I verified the config is as per;
and
I will try the fix my network wizard out of hours on our own server and update this post later.

Hey - NM network reports again in my Inbox

After several months of outage suddenly out of the blue I received two NM network reports both for "Sunday, June 28th". I am used to the fact that day of the week and day of the month does not match, also the report was empty because the PC was not turned on on Sunday, but this might indicate that NM network reports are back.
Any similar experiences from other forum members?

After few days of empty reports (in spite of the fact that PC was turned on and used) last two reports are normal again. All network activity and applications used are presented as they should be.
Nice Cisco, try to keep it that way .
So currently for me there exists just one minor problem related to the NM - day of the month and day of the week in the report do not match e.g. today Sunday, July 4th, I received report for Friday, July 3rd.

Viewing Network reports

Hi, I purchased the Cisco wireless rounter earlier this year and love it.
I signed up for the network reports with Network Magic but when I click on the email it asks me to download Flashplayer 10.
When I agree it appears to download but I can't find it on my machine and of course can't read the report.
Some software trial ended several weeks ago. Can I get the reports without purchasing it?
I use compuserve and Windows XP Home Ed SP 3.
Can you help me please?

sec wrote:
Hi, I purchased the Cisco wireless rounter earlier this year and love it.
I signed up for the network reports with Network Magic but when I click on the email it asks me to download Flashplayer 10.
When I agree it appears to download but I can't find it on my machine and of course can't read the report.
Some software trial ended several weeks ago. Can I get the reports without purchasing it?
I use compuserve and Windows XP Home Ed SP 3.
Can you help me please?
Hi sec,
Computer Reports is only available for Paid Users of Network Magic Pro 5.5.
The Flash Player 10 or Abobe Flash Player is automatically installed, once downloaded.
http://www.purenetworks.com/product/pro.php
Click on Product Comparison.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Arabic Charcterset for Reports

Hi All,
I am using Oracle Develoeper 10g and have a problem for charcterset please help.
I have a made Form using Oracle registry parameter
NLS_LANG=American_America.WE8ISO8859P1 and USER_NLS_LANG=ARAB_SAUDI_ARABIA.AR8MSWIN1256
My Forms and Reports both contain Arabic and english data.
When i open a form it works fine and shows Arabic charcter and lable and layout.
And when i run a report from Report builder it works fine as well.
But when i call the same report from same Form, it do not show arabic label characters.
But when i make following change the
USER_NLS_LANG=American_America.WE8ISO8859P1
reports work well but form show invalid characters .
Please help.
Regards,
Imran

Looks like a bug, are you in the USA?
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

Wireless network report says that the wireless radio is not fuctioning

I have a C309a HP printer. When I updated my laptop from Vista to windows 7 and try to connect to the wireless printer, it will not connect wirelessly. When I print the Wireless network Test Report the report says that the Wireless radio in the printer is not functioning. Do I need to buy another printer???? I have gone into the wireless radio selection and made sure that it is set to on.

Hello Jawhited,
It might be possible that the printer is not able to initialize the printers wifi adapter. There are a few steps that I would try before looking for a other printer. One of them is contacting your local HP support. Often with a reset, they might be able to to re-initialize the printer in a attempt that it would re-enable the printers wifi card.
What could also help, is making sure that Bluetooth is disabled, or first disabling every communication option and then re-enable the wifi radio only. Though as I said before, make sure to contact you local support for any further options they might have.
Kind regards,
van Baardewijk

Displaying Arabic in PDF report generated by Report viewer

Dear all,
we are using oracle developer suite 6i 32 bit on oracle database 10gR2 32 bit on windows server 2008.
we have a problem with displaying Arabic in our pdf file which is generated from the report.
details are below
1. our database NLS details are below
select * from v$nls_parameters
PARAMETER                                          VALUE
NLS_LANGUAGE                                       AMERICAN
NLS_TERRITORY                                      AMERICA
NLS_CURRENCY                                       $
NLS_ISO_CURRENCY                                   AMERICA
NLS_NUMERIC_CHARACTERS                             .,
NLS_CALENDAR                                       GREGORIAN
NLS_DATE_FORMAT                                    DD-MON-RR
NLS_DATE_LANGUAGE                                  AMERICAN
NLS_CHARACTERSET                                   AR8ISO8859P6
NLS_SORT                                           BINARY
NLS_TIME_FORMAT                                    HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT                               DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT                                 HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT                            DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY                                  $
NLS_NCHAR_CHARACTERSET                             AL16UTF16
NLS_COMP                                           BINARY
NLS_LENGTH_SEMANTICS                               BYTE
NLS_NCHAR_CONV_EXCP                                FALSE
2. our registry details are below
NLS_Lang=ARABIC_AMERICA.AR8MSWIN1256
3. our operating system details are below
System Language= Arabic Oman
4. PDF Viewer is Adobe Acrobat Reader
now here is the problem
when we generate the report, the report viewer display the report and the Arabic is displayed as expected.
but when we click on File>Generate to File>PDF
the file is created, but the contents of the file are in unknown format, it is neither English nor Arabic.
if we click on File>Generate to File>RTF
then the Arabic is displayed correctly, but it is not what we need. we need to display it in ADOBE ACROBAT or FOXIT READER for example.
How to fix it?
kindly guide us accordingly.
Regards

any help please?

Problem with arabic language in report 10g

hello all, sorry i can't speak english very well
im using oracle database 10g and forms,report 10 g
windows xp sp3 operating system
i call my report from my form its working very good
but report language appear is symbol something like this pic my language is arabic
[http://imageshack.us/photo/my-images/6/reporterror.jpg/]
please help me and thank's

rzuluaga wrote:
Hi,
- What is the NLS_LANG value you are using for your reports environment?
- How is the output if you use desformat=html?
- What font are you using in this report?
- When you run the reports in Reports Builder how does it look?
- There is a good support note regarding Font issues that is worth it to review
Reference
Master Note for Font Issues in Oracle Reports (Doc ID 1297012.1)
Regards
What is the NLS_LANG value you are using for your reports environment?
ARABIC_EGYPT.AR8MSWIN1256
How is the output if you use desformat=html?
[http://imageshack.us/photo/my-images/221/report1h.jpg/]
arabic is good is html but design not good
What font are you using in this report?
Arabic Transparent -i sure this font is good for arabic-
When you run the reports in Reports Builder how does it look?
[http://imageshack.us/photo/my-images/191/report2vl.jpg/]

Arabic in XML Reports

Hi,
I have created a template of RTF format with which contains Arabic.
It looks fine in the template but when I run the report through concurrent program it shows junk characters in the PDF output format.
Please let me know what are the pre-requisite and options need to used to view in Arabic.
Thanks and Regards.

Hi ,
For your proplem it may be two cause ,
Firstly ,how did you define the template on the applications in the section of Langauge and Teriotory?
in 11i, choose the Langauge Arabic and the teritory Egypt,
in 12r chhose the langauge English and leave the teritory blank.
Secondly IF you do this and the arabic character still junck contact your system adminstrator to define the arabic fonts like (Arial,Albanine,(Hendi for numbers)) under the righte paths .
It should work cause i was having the same problem .
Eman

Problem in retrieving arabic data (Oracle Report Builder)

Hi ,
- When I built a report using report builder and click run paper layout icon, all retrieved Arabic and English data , labels, Header and Titles appear fine also font properties( font, size, bold) appear fine.
But when click run web layout icon for the same report ,
- all Arabic retrieved data appears ? ? ? ? ? ? ? ? ? ? .
- Arabic labels appear fine.
- Headers and Titles didn’t appear at all .
- All font properties( font, size, bold) don’t appear , I used many fonts like (Times New Roman, Arabic Transparent, Arial,…)
- NLS_Lang in registry= american_america.ar8mswin1256 which supports English and Arabic languages.
And I can insert and retrieve Arabic and English data from SQL+ and iSQL , so I feel that settings of NLS_Lang and
CONTROL PANEL-REGIONAL STTING are correct.
Thank U & Best Regards

If you are using ODP.NET, please repost this to the ODP.NET forum.
Please include the following information in your post:
1) The characterset of the database
2) The characterset of the Oracle client

Standard Network Report

Hello,
Is there any report available, where the std Network is the input and output should be the operative WBS elemnets .i,e a standard network is used in some 100 projects,if I the std network as input the report should display all WBS elements in which this std network is used.
Thanks and Regards
Sharad.

Hi,
Create a small Query linking AFKO, AUFK tables....
Hope this helps.
Regards, Murugesh

Regarding Arabic Language RDF Report

Dear All,
I am working on one Arabic Report. I have changed the following in Windows XP OS,
NLS Lang for Devesuitehome - "AMERICAN_AMERICA.AR8MSWIN1256"
Changed the Regional & language settings. When I run the report from Report Builder the output is showing the Arabic Characters as it is in the Layout. (Titles , some labels, etc...)
I have moved the same report to Oracle apps (Application Tier, $AP_TOP/reports/US) and created the concurrent program for the report... the output file format is .ps and I have installed Ghost Viewer to view .ps files.
When I run the report from Oracle Apps, the output is showing all junk characters instead of Arabic Characters.
Any of you faced the same problem before? Please share your ideas.
Thanks in Advance.

M@**** wrote:
Since facing the same issue in different situation, posting then thread in detail.Is this issue related to the one you have in your other thread? -- Arabic Characters are displaying as Junk Chanracters in Reports
If yes, please update one of the threads only. Otherwise, mention the details of your application release, database version and OS. Also, run the tests mentioned in the other thread.
Thanks,
Hussein

WiFi Finds Home Network, Reports Incorrect Password

New iPad 64GB Wifi. Works with WiFi at work, but with my home computer (Dell) and DSL (Verizon Westell 7500), I get the "Incorrect password" for my network error. The iPad finds the network, it just won't connect. I've tried it with the iPad on the same table as the router. Have tried numerous times, so I'm sure I'm typing the password correctly. Have rebooted everything. Fujitsu tablet (also Windows 7) works fine. Suggestions?
I think I've read all the relevant threads and and have read many other discussion found on the internetz.

If you've been reading some of the other threads on here dealing with home WiFi networks, you know one of the first questions is how old is the router? Several posts have been due to old hardware. Next, what security are you using,WEP or WPA? WEP has been problematic for some people. Use WPA if possible.
A reset of the iPad network settings, then reselecting the WiFi network and entering the security information may help. Of course, after resetting the network you will have to rejoin and enter the information for your work network.
Given the keyboard requirements of the iPad, i.e., caps and special characters, be careful to watch as each is entered...you can see the entries for a brief period in plain text.
Just some thoughts that come to mind.
Message was edited by: Ralph Landry1

Arabic in network reports

Similar Messages

Maybe you are looking for