Arabic localization changes don't change the left to right Alignment

Hi all,
We are using localization for our application and the supported locales (registered in faces-config.xml) are English and Arabic. When the language is changed as per user preferences , the corresponding Arabic values are read from the bundle properties, but the alignment for page and menu is not changed form left-right to right to left automatically.
Code for locale change is given as :
FacesContext.getCurrentInstance().getViewRoot().setLocale(new Locale(LANGUAGE_AR));
Also tried the following entry in the trinidad-config.xml
<right-to-left>
#{view.locale.language=='ar' ? 'true' : 'false'}
</right-to-left>
Please let me know , if I am missing something to achieve the alignment change
thanks
JZWL

Hi,
Try : <fo:block text-align="right">Your text here</fo:block>
Regards,
Colectionaru

Similar Messages

  • I went to the full screen and don't like it and need to know how to get back to what I had. Also, is there a good way to set up bookmarks? Like in a column on the left or right side? Thank you.

    I went to the full screen and don't like it and want to get back to what I had. Also, is there a way to set up bookmarks so that all show in a column on the left or right side?

    Just press F11 on your keyboard to exit full screen mode.

  • How do I move a page to a new location that is offscreen to the left or right on the planning screen

    When I'm in the planning screen mode, even though I have the thumbnails set on their smallest size, my website is so large that the  branches of the hierarchal layout of webpages and their various subpages stretch out to the left and right far distances off the screen. When I try to move one of the little rectangular webpage icons in the hierarchal layout in Plan Screen mode, I can't move it off screen to the left or right to change its position in my website's horizontal menu.  In other words, even at the smallest setting for the icon webpage thumbnails, there's so many icons that they go off page and I can't move a webpage icon to a position that is currently off-screen to the left or right in the menu layout.
    Any ideas how to do that?  Is there a non-graphical way to do it? Thanks!!!

    Your best bet is to reduce the thumbnail size to the smallest, then turn off thumbnails (to speed redraw), then drag in multiple steps, scrolling the Plan view each time. In the upcoming release of Muse (June 17th) you will be able to collapse vertical stacks of pages, which will means your Plan view won't be as wide. If you collapse each stack, you will only see the top level pages, and you won't have to scroll as many times. Or maybe they will all fit. What you really need is autoscroll in Plan view, which we don't currently have.
    Paul Sorrick
    Muse Engineering

  • Viewing angle to the left or right I get a Yellow tint

    When I move to the left or right I get a Yellow cast to my screen. Moving up and down no yellow tint.
    Normal or not?

    I had the same problem,
    You need to change the color profile to this one:
    http://idisk.mac.com/sacha.rod/Public/Color%20LCD%20Ca
    librated%20by%20Sacha%20Rod.icc
    Let me know if it's ok after using the new color
    profile.
    I will give it a try.....but how do I do that. I down-loaded the profile but don't know how to install it?
    Thanks

  • It it possible to have info on the left and right sides of iweb templates?

    When I look at my iweb website there is empty space on the left and right sides of my screen. I was wondering if this space could be used at all?

    Hi
    You can increase the width of your Page, go into Inspector, Page Tab. From here you can adjust the Content Width, which is the width of your page, the bits that you see on the left and right are fillers, for people who's browsers are set bigger than your site. You can change the color that shows by changing the Browser Background.
    In the good 'ole days, most people had screens that were only 800 W x 600 H, but these days most people have at least 1024 W x 768 H (some do, no doubt still have 800x600). So, 1024 is really the max width you can go, dont forget that you need to leave some space for the browser as well, and the scroll bars.
    But pages this big are wider than normal, the best thing to do is experiment and see what works for you.
    Will
    1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini   Mac OS X (10.4.6)   www.willg4pb.com for iWeb tips

  • How do I plot a y axis on the left and right in DIAdem/VIEW (version 11.0)?

    I am trying to analyze flight data, and I would like to analyze plots of certain parameters so that they share an x axis. It is necessary to view these using two different y axis, on the left and right. How do I do this in DIAdem (version 11.0) in the VIEW tab? Is this possible to do in the VIEW tab?

    myocom,
    You can highlight random points in DIAdem as well. 
    Here is an example:
    Use the cursor to move to the point you wish to highlight.
    Press the "Set Data Point and Flag" icon on each data point you wish to highlight
    When you are done selecting points, press the "Flags: Copy Data Points" icon - that will copy all X/Y coordinates into two new channels
    I created a REPORT Layout using the original data and the highlighted random points (I added the actual point Z-value above the point, they look strange when written at the exact point). I attached the layout for your reference.
    The complete task took 3 minutes from loading the data to finishing and exporting the REPORT layout. If you have a REPORT layout already, this will take less than 30 seconds ...
    I am not familiar with Matlab, so I can't compare how this works in DIAdem vs. Matlab. You can add the combine the complete process in a Script and it will automatically create this kind of report after simply selecting a few data points in VIEW and then pressing a button ...
        Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."
    Attachments:
    Report with highlights.zip ‏5 KB

  • I would like to transfer old reel-to-reel tapes to an iMac. There are different recordings on the left and right channel of the tapes. When I connect the tape deck to the Mac, I get one recording on the left, the other on the right speaker. What to do?

    I was about to transfer some music from a reel-to-reel machione to my Mac. There are different sound recordings on the left and right channels. When I connect with RCA cables and Y-connector, I hear one recording from the left speaker, another from the right side. How do I record only one side, but hear it from both speakers?
    Detlef

    You don't say what end, or connectors are plugged into what. I'm assuming the RCA connectors are on the reel-to-reel end. Since the tape has two different mono recordings, one on each track, you of course only want one at a time during playback. Otherwise, the Mac (or any recording setup) can only treat it as a stereo recording with the standard Left-Right tracks.
    1)  There are multiple ways to connect different types of cables to get a mono signal down to a stereo output at the Mac. Here's one way.
    2) Plug any RCA cable (single cable or stereo) into only the right or left RCA output of the reel-to-reel.
    3) On the other end of the RCA cable, plug in an adapter like this. That will feed the single RCA output into a mono 1/8" plug.
    4) Then plug that adapter into this. That turns the 1/8" mono signal into a "stereo" output with the same single track audio being fed to the Mac on both the left and right channels.
    5) Record either the left or right output of the reel-to-reel. Rewind the tape and switch the RCA connector on the reel-to-reel to the right channel (if you started with the left) and record that mono signal as stereo.
    Or, avoid all of this hardware mumbo-jumbo in the first place and do this:
    1) Record the audio just the way you have it. Two different recordings, one on each channel.
    2) Copy the audio recording to a new name and open it in your editor.
    3) Highlight the left track and copy/paste it into the right track. Presto! Mono recording of the left track on both channels. Save the recording.
    4) Repeat, only copy/pasting the right track into the left track and save the second recording.

  • HT201322 What if it doesn't give you a "hide" option when swiping to the left or right ? And it's doing that on my iPhone 5 & my new iTouch (5th Gen) ?!? Any advice would be helpful.. Thanx!

    Mine does not give me an "option" to hide purchased items and the specific one I'm referring to was FREE, and when I swipe to the left or right it doesn't do NOTHING! I need help guys..lol

    It doesn't appear to work on iOS 6 (and neither does unhiding, though you can still view and download them) - whether that is permanent or only temporary I don't know. You should still be able to hide things via your computer's iTunes.

  • How can I make an object float to the left or right?

    I am currently working with a site that is designed to fill the browser window.
    I would like my footer elements to attach to the left and right respectively. I know in html this can be accomplished by using "float", but I don't see any way to accomplish this in Muse.
    Am I missing something?

    Hi Skyler,
    If you are looking for the element to remain on screen in same position at all times then I think using the 'pin' option is what you are looking for. With a box (or whatever) selected you'll see an option at the top, next to your x,y co-ordinates with a little square with 6 selectable points, each point representing where the element will stick to.
    Alternatively if you are just wanting the bar of the footer to stretch across the window regardless of size then if you have the left of the bar exactly on the outside left edge of your page, and same with right, it should do the stretching for you automatically.
    Is this what you were meaning?

  • How do I apply effects equally to the left and right channels.

    I am an intermittent user of Sound Track Pro. I've made some cool audio beds with it in the past but right now I'm having two problems since I have not used it in so long and never was pro with it to begin with.
    1. Seems like the lift and stamp tool only works in multi-track mode and not in the wave editor.
    2. so I put my file in the wave editor to redo the effects from scratch there but now I don't know how to apply them equally to the left and right channels.

    Thank you! One more question: I've got quite a bit of interview tape and would like to increase the playback speed to 1.5X or 1.75 x so that I can get through everything faster. Is there a way to set it at those tempos? I only see the 2X, 4X, 6X, etc. options, but these are too fast and I can't understand what is being said. Is there a way to set this to 1.5X the original speed?
    Thanks!

  • I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

    I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

    If you mean there are parts of the picture at the sides you want to remove, you have at least 2 choices.
    You can mask the edges of the frame or enlarge it so that the left and right sides are outside the picture area.
    The latter suggestion will reduce the quality of the video and you will also lose an equal amount from the topand bottom, though you could slide the image up or down.

  • I can't sync my iPod classic with iTunes 10 anymore. A notice comes "You don't have the adequate access rights to make modifications." What happend?

    I can't sync my iPod classic with iTunes 10 anymore. A notice comes "You don't have the adequate access rights to make modifications." What happend?

    bump

  • White Borders Around the Left and Right Edge of a Published Movie

    Does anyone know how to get rid of the white borders that are around the left and right edge of a published movie? It looks like they are about a 1 pixel border. I have the "show borders" unchecked in the themes options.
    Any help would be appreciated.

    You need to add some CSS code into the HEAD area of you HTML publishing template to remove the default HTML margin.
    <style>{margin:0px;}</style>

  • When you scroll to the bottom of the list of files in Finder, the left to right scrollbar doesn't let you click the last file and it covers the file for a while until it disappears. Is this a bug? How do I not make that happen?

    When you scroll to the bottom of the list of files in Finder, the left to right scrollbar doesn't let you click the last file and it covers the file for a while until it disappears. Is this a bug? How do I not make that happen?

    An odd workaround: click "Always" in System Preferences/General/Show scroll bars. The scroll bars will always show, but they won't cover your last file.
    See this other post: https://discussions.apple.com/message/20572471#20572471

  • Thunderbolt has 2" blank border on the left and right edges.

    When I connect my Macbook Pro 13" to my Thunderbolt display, the screen display has a 2" border on the left and right edge.  How do I size the screen to fill up the entire display?

    Hi. I had the same resolution problem as jmzmac...I turned off mirroring and my Thunderbolt display now just has the standard screen saver on it. If I click on System Preferences that window will show on the TBD and I can move my mouse across the two screens so I have an extended desktop but I really want mirroring with the correct resolution so there isn't that 2" space on either side of the screen. I tried the clamshell mode (closing the MacBook Pro, waiting a few seconds, pressing any key to wake it up) but nothing happens on the TBD. Any help would be greatly appreciated. (Running 10.6.8)

Maybe you are looking for