Arabic not supported in windows 2000

I am running my project in windows 2000 and its working properly (in english), but in case when i want to change the button captions to arabic text its not accepting and displaying some ascii charachters in the property window its self , the rest cases like labels,data fields all in arabic are allright.i cahnged in the regedit to arabic and my windows are arabic enabled.
can any one give suggestion thanx.

We are using Forms on Windows2000 and Arabic Language. All what you have to do is to set the Language options to Arabic in the Control Panel-> Regional Options.
Good luck
Emad

Similar Messages

CD/DVD drive it's not supported by Windows XP and Bios

I've bought a new cd/dvd drive Mat****a Panasonic.
It only work on Windows 2000, it's not supported by Windows XP and Bios, so i can't boot with.

Could you please provide some information (name) about you notebook?
Did you bought this drive or was this drive delivered with the notebook?
If the drive cannot berecognised by BIOS then in my opinion the drive supports wrong master / slave / c-sel settings.
You should know that not all drives are compatible.
The settings cannot be changed because the drive dose not supports any jumpers but only the firmware.

Is EPM 11.1.1.3 supported on Windows 2000

Hello Experts,
I have referred the support matrix of EPM 11.1.1.3 and found that Windows 2003 supports EPM 11.1.1.3
Can anyone confirm whether EPM 11.1.1.3 is supported on Windows 2000 or not?
Thanks in advance.
Regards,
Sonal

Hi
version 11.1.1.1 - I could able to install and configure successfully on wn 2k adv server sp4, but later on when i installed 11.1.1.3 i got into some issues.

Hp laserjet 1022 = this printer is not supported under windows 7 shares?

hp laserjet 1022 => this printer is not supported under windows 7 shares?

Yes I understand, but this printer is not installed on a network share. Always remain sown printing in the print queue. Consequently, I ask if you can type HP 1022 printer in Windows 7 share?

Is 11.1.2.1 (32 bit) not supported for windows xp professional (SP2)

Is 11.1.2.1 (32 bit) not supported for windows xp professional (SP2).
Edited by: 867760 on Aug 18, 2011 3:36 PM

No, it is not supported as a server.
Please refer: http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls for supported versions.
HTH-
Jasmine.

Workflows Do Not Start - "Not Supported in Windows Authentication Mode"

I have a publishing site that is using Kerbos authentication. Everything on the site works fine.
I created a simple workflow in SPD 2013 and published this to the site without any problems. However when I try to start the workflow with the account of a user who is a member of the site it will not run. In the browser an alert pop's up
saying "Something went wrong. To try again, reload the page and then start the workflow again".
In the SharePoint log's I find the following:
SharePoint Server Workflow Services aj5oh Exception System.NotSupportedException: Not supported
in Windows authentication mode. at Microsoft.SharePoint.IdentityModel.SPIdentityContext.Create(SPUserToken token, Boolean isShareByLinkGuestUser) at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.GetApplicationUserCredentials(WorkflowServicesContext
context) StackTrace: at Microsoft.Office.Server.Native.dll: (sig=1f86b0bf-2440-4b16-9099-860a571153c2|2|microsoft.office.server.native.pdb, offset=131CE) at Microsoft.Office.Server.Native.dll: (offset=21C85) 799af29b-db87-0034-c938-8a35e4082ffc
This is a dev environment where everthing is setup on a single box, and I registered the workflow service in HTTP mode (which I allowed during the installation of workflow manager).
Any ideas on what the problem might be?
Thanks,
Richard

You haven't changed it to Claims there, you have changed NTLM to Kerberos. I guess your web app was already claims based because in SP 2013 we have to use Powershell to convert classic to claims and not from GUI.
When I click the workflow on a item to start in manually I get the error:
"Something went wrong. To try again, reload the page and then start the workflow"
In ULS I get the not supported exception.
It seems 2013 platform workflows aren't supported in classic mode web applications:
http://sharepointconnoisseur.blogspot.co.uk/2012/11/sharepoint-2013-upgrade-preparation-to.html
But I am not able to publish 2010 mode workflows in the classic web application, SPD 2013 throws error while publishing:
"Unexpected error on server, wf cannot be associated"
So does Infopath while publishing on to a list in that web application:
-- The opinions expressed here represent my own and not those of anybody else -- http://manojvnair.blogspot.com

Labview 2009 .exe not working with windows 2000

I created a simple vi with Labview 2009 to reset a counter in registry key. I changed it to an exe. The program runs fine on any machine with XP but it does not work on the machine I need it on which is running Windows 2000 SP4. I installed the 2009 runtime but I continue to get an error when it starts up saying the vi is not executable and that I need the full development to fix the errors. But like I said it works every where else. I've tried other exe wrote in LV2009 on this machine and they work. Is there something in my vi that is not compatible with Windows 2000?
Thanks
Solved!
Go to Solution.
Attachments:
Serial Number Reset Cell 2.vi ‏15 KB

There was an issue with building DLLs on Windows 2000 - http://digital.ni.com/public.nsf/allkb/431C9BD8F3482033862576A90073441F. Since you say you are trying an EXE, this may not be applicable.
George M
National Instruments

CAD is not supporting in windows 8

CAD is not supporting in windows 8. Has there no any solution to install CAD in windows 8?

Hello
In order to run CAD within a Windows 8 environment, you would have to run or upgrade to UCCX 10.5.1 and your Windows version would have to be 8.1.
http://docwiki.cisco.com/wiki/Unified_CCX_Software_Compatibility_Matrix_for_10.5(1)
Hope this helps
Tony
Pleas rate helpful posts

Oracle 9i Data Guard supported on Windows 2000 platform ?

Is Oracle 9i Data Guard supported on Windows 2000 platform ?

YES, we are currently using Data guard on 2000 Windows Server. Will need to have the Management server installed in order to get the Data guard function.

Requested extension com.adobe.Vibration is not supported for Windows-x86 Problem with Cs6,air3.4.

While compiling my application on Flash CS6 with Air for iOS 3.4, I am getting the error given below:
The content cannot be loaded because there was a problem loading an extension: Error: Requested extension com.adobe.Vibration is not supported for Windows-x86.
I am using vibration.ane file which got it from Adobe (http://www.adobe.com/devnet/air/native-extensions-for-air/extensions/vibration.html)
Anybody out there who knows how to solve this problem!
Thanks.

1) The vibration ANE from Adobe does not support Windows.
2) The iOS simulator (adl) is not a virtual machine but rather it is a native Windows app, thus the platform your app runs on is Windows not iOS.
What Adobe needs to do to avoid confusing everyone is one of two things:
1) Include a stub for Windows (and MacOS) in the Vibration ANE.
2) Make it possible to deploy an app to a platform where the ANE is not supported, but produce a runtime error upon an attempt to use the ANE. The developer could then put logic in the app to detect the underlying platform and make adjustments.

AC97 onboard sound DOES NOT WORK under Windows 2000

Just an FYI, the AC97 Audio on your MSI mainboard will not work under Windows 2000, for which the AC97 hardware is not certified. If you try to use it, your audio output will be intermittant at best and will crash your audio applications at worst. A maddening and disheartening problem for people like me who didn't realize the problem existed and spent many hours trying to getting it to go away.

hiya -
I am have this trouble as well!
Are you useing professional, or Advaced server?
I have done EVERY kind of update... so dice.
*sniff *

Yomi (furigana, or pronunciation ) field is not supported in Windows Live Service API.

Problem:
Yomi (furigana, or
pronunciation ) field is not supported in Windows Live Service API.
Description:
When backup contacts from iOS/Android phones to outlook.com, we tried Windows Live Services API as below.
https://msdn.microsoft.com/en-us/library/dn783283.aspx
You can set "yomi first name" "yomi last name" from outlook.com WEB UI, but I couldn't find the REST API to read them, or edit them. Which scope should I refer
to, to access yomi fields?
What we have investigated:
When backup contacts from Windows Phone to outlook.com. Yomi field is synced.
When sync outlook.com to gmail account, Yomi field is synced.
Looking at Windows Live Contact Beta API,
https://msdn.microsoft.com/ja-jp/library/bb463953.aspx Yomi Field is in it.
But in RTM Windows Live Services API, Service url is changed, API parameters are also changed.
Windows Live Services:
https://apis.live.net/v5.0/　　（no
Yomi field）
Windows Live Contacts Beta:
https://livecontacts.services.live.com (has Yomi field)

Hi Siva,
The API version is hardcoded in Microsoft.ServiceBus.dll, which ships as part of the Service Bus. Each version of this lib has a different string.
If you install workflow manager 1.0, here are the pre-requisites:
.NET Framework 4 Platform Update 3 or .NET Framework 4.5
Service Bus 1.0
Workflow Client 1.0
PowerShell 3.0
The following are the pre-requisites to configure Workflow Manager 1.0
Instance of SQL Server 2008 R2 SP1, SQL Server Express 2008 R2 SP1, or SQL Server 2012.
TCP/IP connections or named pipes must be configured in SQL Server.
Windows Firewall must be enabled. [Windows Firewall is Off on target server]
Ports 12290 and 12291 must be available.
Here are the reference for installing and configuring Workflow Manager 1.0:
http://lennytech.wordpress.com/2013/06/02/installing-workflow-manager-1-0/
http://lennytech.wordpress.com/2013/06/02/configuring-workflow-manager-1-0/
Regards,
Rebecca Tu
TechNet Community Support

Nano not recognized by Windows 2000

When i plug in my nano it needs driver files for the device... as far as i know these files are not on the included CD and all of the apple support on the website was unable to fix my problem. Can someone please explain how to get my computer to recognize my nano. Also i have windows 2000 and all of the XP solutions i have seen have not worked for me.

Hey,
I google.ca'ed your error message and brought up this discussion board:
http://www.billpalmer.net/ipodgarage/phpBB2/viewtopic.php?p=60612&sid=1da54d3c45 6559b34b29f7d1e4512986
They seem to have found a fix on that site, I would suggest following their solutions.
Also do you know what service pack your running on your computer? Is is SP4?
Thanks,
Ms D.

Printing of output is not generating in Windows 2000 Env.

Hi
Suddenly in EBS 11.5.9 on Windows 2000 we are unable to get prints of concurrent programs directly in Printers.
After setting Reprint option from Tools menu and passing proper printer name ..no printer is coming .. 2 hours back everything working fine
any idea

Could you please verify whether you have patch 4233553 applied or not?
Note: 307974.1 - Reprint Fails With Several Different Symptoms After Patching
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=307974.1
How i can diagnoise it ???If the above note does not help, then I would suggest you enable trace. You may also log a SR and provide Oracle support with the log file generated.

Satellite 1605cds: RAM not reported in Windows 2000

Hello
I have a 2nd hand Toshiba Satellite 1605cds/4.3 (an amd k6-2 450 mhz based system).
It has 32 MB of ram on board, and a so-dimm slot to put in a memory of 128 MB.
But I have read this webpage:
http://fandelem.com/toshiba2.html
where it says that it can be upgraded with a 256 MB memory module!!
I have plugged it and it shows correctly 288 MB (32 MB on board + 256 MB on the slot) in the bios.
When I boot from the Windows 98 SE partition, it shows the 288 amount of ram.
...but when I boot to the Windows 2000 Professional partition, it shows a blue screen saying that the bios is not an enhanced ACPI bios. It says that I have to push F7 key during the installation of Windows 2000 to disable ACPI and install HAL.
But If I remove the 256 MB slot, Windows 2000 boots correctly without any problem.
I have tried re-installing Windows 2000 pushing the F7 key during the installation, but then Windows 2000 only shows the 32 MB of on board ram.
So, what can I do to run Windows 2000 and the 256 MB module??
The bios is the latest that can be download in toshiba web page.
Thanks for all and sorry for my english.

Hi
According to your description W2k says to update the HAL (Hardware Abstraction Layer). In Windows 2000 there are several ways to troubleshoot issues related to the Hardware Abstraction Layer (HAL) that may occur as a result of misdetection, an outdated or non-compliant Advanced Configuration and Power Interface (ACPI) Basic Input/Output System (BIOS), or an incorrectly or manually installed computer type.
For further information please check this Microsoft support site:
http://support.microsoft.com/kb/237556
But as I know Toshiba support only the 128MB on this unit and if you want to use more ram you can do it on your own risk!

Arabic not supported in windows 2000

Similar Messages

Maybe you are looking for