Arabic text printing using smartfroms

Hi,
I' m printing Purchase oder in Arabic language , we installed Arabic supoort drivers
in SAP system, when I see arabic values in debugging I am able to see arabic text perfectly , but when I give print or Print Preview arabic text printing as with some JUNK arabic characters , it's not printing as word.
Please help me on this
Thanks
Naveen

I am facing exactly the same problem with printing arabic text in samrtforms. I guess you the Device type in the printer settings would be set to either ARSWIN. Try changing it to I6SWIN and it should work to some extent. The arabic words should come up correctly in the print ( not in print preview). However it would print # in the start and end of the form. This is not acceptable in my case and I am still looking for a better solution. See if it helps you in some way.

Similar Messages

  • Re : Problem in arabic text printing in smartforms

    Hi,
       In smartforms I am printing arabic text. Its coming correct up to the variable. But while printing Each and every word having space. How to avoid this space between thw arabic words while printing.
    Regards
    Anto

    When I export a SWF containing Arabic Text from Flash, I get
    no errors and everything is ok. The problem occur when I compile a
    SWF from Flex Builder, I'm using FP 9 for both files

  • Arabic Text Printing in PO Layout

    Hi,
    The requirement is only "Vendor Name" mainained in Arabic language in "Name3" field of the Vendor Master, should print in Arabic Text in PO Layout Printout. PO Printing is in English. This vendor name is appearing corrrectly in Vendor Master Name3 field as we uploaded it throguh Upload program in Uni Code text. After printer setting, PO Layout is printing correctly in English & now Vendor Name3 is also printing in Arabic Text (other vendor details are in English) but Araic Vendor Name is coming as seperate charaters instead of joined arabic word. Has anybody faced this problem? Your comments are welcome.
    Regds
    Chandan

    Dear,
    check: http://www.sdn.sap.com/irj/sdn/printing?rid=/library/uuid/8075b32f-d7c9-2b10-db84-97015a3a23f4&overridelayout=true
    Regards,
    Syed Hussain.

  • Printing Arabic text in Oracle Application(R12i) using XML Publisher.

    Hi,
    I am using Oracle Application R12i version with Oracle database as 10g, base language as English and installed language as Arabic.
    I am trying to print the data which is there in English/Arabic in Oracle Application(using XML Publisher).
    I've created a rdf using Report Builder 10g and registered as concurrent program (XML as Output format). There after i executed the concurrent program and generated the XML file.
    Based on the XML file, i created a rtf file using XML Desktop(in Ms word) and register the same rtf file in XML Publisher Administrator for creating the XML definition and Template and Output as PDF.
    After creating a XML template, when i executed the Concurrent program, english text is shown in english but arabic text is shown some ascii characters like Question Mark(up side down).
    Could anyone please let us know the steps for doing the same or plz let us know are we missing any step.
    Quiet urgent.
    You could also reply to [email protected]
    Thanks in advance
    Your help will be appreciated.
    Edited by: user10772035 on Aug 20, 2009 10:23 PM

    Same Problem here, if you are able to solve it, please also help me.

  • How to print Arabic text along with the English in smartform ( ECC6 version

    Hi All,
    our is ECC6 version, Non unicode, ABAP stack ( not dual stack )
    is it possible to print in Arabic language in the above version ?
    if yes, then please let me know how to print Arabic text and English text in the same smartfrom.
    i tried in the following procedures :
    1) i created standard text (SO10) in arabic language.
    i called in the smartform ( include text - i )
    langage AR
    but system throws error message saying, required language is not installed.
    2) if i use READ_TEXT function module.
    text getting printed in diff format but not in arabic.
    waiting for your replies..

    ECC6 and Non-Unicode? I think you'll need multiple code pages, I doubt there's a mixed Arabic/Latin1 available. And I don't think SAP supports new MDMP systems any more. If you need to support multiple languages you really need to go Unicode. It's probably easier to do the Unicode conversion than to try to support multiple code pages and you have to make the switch eventually.

  • Arabic text in my web application using iText..

    Hey Guys,
    I'm using the iText library to produce PDF reports in my web application; platform (ADF 11g and Weblogic 10g). I'm having a problem with rendering arabic text on the page, is there a way to print arabic text outside of a PdfPTable ?? I need to print a simple text like the title of the report , the subtitle and so on... please guys I need an answer...
    Thanks in advance.
    AccadSoft

    gimbal2 wrote:
    sabre150 wrote:
    AccadSoft wrote:
    please guys I need an answer.To get answers about using iText I use "iText In Action, 2nd edition" by the prime author of iText - Bruno Lowagie.Classic way to make money - make the API free and sell the documentation. Also an honorable way to make money IMO.I was using iText before 2004 when the first edition of the book came out ( 4 years or so after the library was first introduced) and it was hard work. PDF is a very complex document format and just using the Javadoc does not really get you anywhere. There are many 'gotchas' in iText and most of the iText tutorials cover only the very basics and pretty much none of the 'gochas'. The book starts off with very simple examples that could be constructed from the Javadoc but then it does move on to the more complex issues. Worth every penny.

  • Arabic Printing using Smartforms

    Hi Gurus,
    I am trying to print arabic text using smartforms. I have set MS Word as the text editor. Arabic text is coming up correctly in the editor (Arabic font, Right-to-Left). I  created a Arabic smartstyle using A_TRAD font (I also tried other arabic fonts available). Now when I try to print it on HP LasetJet printer, the arabic text is coming up as single characters rather than words and lines. Different Arabic characters are not joined together to form words, they are all single characters separate from each other. Whereas arabic text is coming up correctly in the MS Word editor. Any help would be highly appreciated!!
    [email protected]

    Hi There.. Greetings...
    I am having the same problem of printing Arabic text in the smartform. The arabic Text is printing in opposite direction as well.
    what is the solution for this?
    Please help me.
    Looking forward to hearing from u.
    Kind regards,
    shekher

  • How to print a text file using Java

    How can I print a text file using Java without converting the output to an image format. Is there anyway I can send the characters in the text file as it is for a print job? I did get a listing doing this ... but that converted the text to an image format before printing....
    THanks,.

    Hi I had to write a print api from scratch, and I did not convert the output to image. Go and read up on the following code. I know there is a Tutorial on Sun about the differant sections of the snippet.
    private void printReport()
         Frame tempFrame = new Frame(getName());
         PrintJob printerJob = Toolkit.getDefaultToolkit().getPrintJob(tempFrame, "Liesltext", null);
         Graphics g = printerJob.getGraphics();
                    //I wrote the method below for calculations
         printBasics(g);
         g.dispose();
         printerJob.end();
    }This alone wont print it you have to do all the calculations in the printBasics method. And as I said I wrote this from scratch and all I did was research first the tutorial and the white papers
    Ciao

  • How to print arabic text as water mark in XML Publisher

    Hi All,
    I am working with Arabic reports,which is conversion of RDF Reports to XML Publisher Reports.
    I Developed RTF template,here problem is how  can i use Arabic text as a water mark in template.
    Please provide me suggestions.
    Thanks in advance
    Regards
    Amar

    do you have arabic text in your report ? is it correct ?
    How To Setup XML Publisher To Show Arabic Characters (Doc ID 556995.1)
    so you can try
    ARABIC Font Shows As ?? Question Marks In Postscript Reports (Doc ID 981174.1)
    you can also post SR

  • Print PDF rich text editor using BI Publisher

    Hi !
    I have a CLOB field from database, and I store data using a rich text editor, like a MS Word system, here as you know, I can write words in bold format, use differents kind of colors, etc... and use all formatted text that the editor allow me. I haven't problems once save this data into table and restore again, I can see all this data formatted , and I don't loose any property of this formatted text.
    The problem is when I want print this information in the same way that I can see in the rich text editor. I use BI Publisher for generate a PDF, when I send this field for print a PDF, the PDF that BI publisher generate, print only text, prints all characters including generating that text is formatted, for example, if the field is written in bold print "<b>hello</b>" in the PDF generated by BI Publisher see "< b. > hello < / b>".
    Please which is the way for print the same as is displayed in the rich text editor?
    Thanks in advance.
    Edited by: Almogaver on 07-mar-2011 14:35
    Edited by: Almogaver on 07-mar-2011 14:35
    Edited by: Almogaver on 07-mar-2011 14:36
    Edited by: Almogaver on 07-mar-2011 14:37

    Bump Again. I understand how to remove the HTML tags, thats not a problem. The problem is getting the report to print the data from a Rich Text Field stored in a CLOB or NCLOB as formatted text. Is there a "Master Style Template" or "Master Rich Text Field Subtemplate"?
    Richard

  • Stop it from using photo black ink for black text printing and where has the color ink gone?

    My HP Photosmart Prem C310 series all in one is using the Black Photo ink cartridge for text printing instead of the XL Black that I put in it for text printing. How can I get it to use the right cartridge for printing? Also, even though I have NOT printed ANY photo's and very few pages of text the new set of color cartridges I put in it a few months ago are almost empty. Why? How could they be almost empty when I have NOT printed anything in color? This is getting ridiculous replacing ink cartridges every few months WHEN I HAVE NOT BEEN PRINTING ANYTHING!!!
    The set of ink cartridges that came with it lasted for several months. Since then I've gone through two sets in less than a year. That's 3 sets of ink cartridges when I have only printed 3 photo's when I first set it up. And have only used les than a 1/4 of one package of printing paper. I've only put paper in it twice. Each time it was about a 1/4 inch or 3/8 of an inch thick stack of paper in the tray. I've even tried shutting the printer down when its not being used for a long period of time but the ink is still disapearing. Where is it going? Why is it going there? How do I stop it? This is rediculous. I may as well junk the thing even though it still works because I cant aford to keep feeding it ink when its just sitting there doing nothing most of the time.
    Thank you
    This question was solved.
    View Solution.

    I just got another email from HP about this problem wanting to know what I found for a solution to this problem. From all of the suggestions from the HP tec support all of them pretty much kept saying the same thing. That it is my fault that it's using so much ink because I have it on the wrong settings. One tec did slip and say that it doesn't matter what settings you have it on it will always use the Photo Black cartridge for printing plain black text and it doesn't matter if you have a X-Large Black cartridge in it for text printing because it was made to always use the Photo Black for text and even use some of the colors to blend with the black to make it stand out. Why anybody would need this when just printing shipping labels and things like that I don't know.
    Any who, The only solution for this problem is,,,, junk the printer and get a different brand & model of printer. Research it before buying to find out how much ink it wants to waste and if it will still print black text if it only has a black cartridge in it. I was going to get rid of mine by giving it to a friend since they don't have a printer. But since I want to keep him as a friend I decided not to give it to him. Since it cant be traded in for a different one even though it still works, Its going to the target shooting range the next time I go out shooting. Maybe I'll take a few video's clips of it getting blasted to pieces with a Ruger 10-22 .22 cal. rifle with 25 shot clips, a Ruger Mini-14 Ranch Rifle shooting .223 cal with a 30 shot clip, a Chinese SKS 7.62 with a 30 shot clip. And maybe use my Ruger P89 9mm pistol and put a couple 15 round clips of 9mm in it. If there's anything left I'll finish it off with a few 3" magnum loads of #2 steel shot with my 20 gauge shotgun.  Then I think I'll do the same thing to my Westinghouse 46" flat screen HDTV that just died.
       Then maybe I'll come back and post the video's of my "solution to this printers problem". It may not fix the problem, but it will be an entertaining way of getting rid of the problem.

  • Print Arabic text in smartforms

    Hi,
    How to print Arabic text in smartforms, where i have to write in arabic please help me as soon as possible.
    Thanks,
    MSA.

    Hi,
    create the text in Arabic .
    ex: goto SO10   give the text name and language is Arabic.
    when u call that pass the language as Arabic.
    ex:
    CALL FUNCTION 'READ_TEXT'
    EXPORTING
    id                      = txt_id
    language                = txt_langu "Rabic language.
    name                    = txt_name
    object                  = txt_obj
    TABLES
    lines                   = t_line.
    Regards,
    Venkat.

  • I have a problem with arabic text in facbook im using firfox v5

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/856583]]</blockquote>
    I'm using Firefox web browser v5 and i can wright and reed Arabic text at all web sights. but when I'm trying to read or right Arabic text in Facebook i have a probable that every letter is separated and when i open Facebook with other browsers like chrome using same desktop the Arabic text appear without any problems.

    I am doing a newsletter which I have an arabic translation of in a word document. When I copy and paste into Illustrator it changes the font (it says times new roman in the word doc, but the illustrator version comes out times new roman but looks completely different ) and the right to left orientation to left to right. How do I fix this?
    Make sure your document language is properly set to Arabic in Word. Just typing Arabic and the document actuall being Arabic are two different things. Mismatches affect Unicode ranges, resulting in the wrong characters being copied to the clipboard. In AI, check the substitution options on the text palette and glyph palette as well as your global glyph protection pref.
    Mylenium

  • We are creating an Arabic language label using AI-CC, Is there a way to import the UTF-8 arabic text w/o coruption ?

    we are creating an Arabic language label using AI-CC, Is there a way to import the UTF-8 arabic text w/o coruption ?

    You can try this:
    http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html
    It's possible to install another language on top of the language you already use. You need to switch your system's language to be able to use the other one.

  • When Using [OLE DB] driver some arabic text appear with cutting last character

    hi
    i have a problem in crystal report when bilding report using using [OLE DB] driver some arabic text appear with cutting the last one or tow characters
    note: i'm using VBasic 6.0 , RDC and crystal report viewer

    I thought I'd post an update to this since I've narrowed down the problem.
    It turns out this is NOT a bug in Apple's Java implementation, but in the AAT rendering engine. In any application, if a user changes the style of part of an Arabic string, it breaks the font connection. I have been informed though that this has already been fixed, and should be functional when Leopard is released. ALL applications that use AAT suffer from this problem, not just Java.

Maybe you are looking for