Arbitrary limit for playback of avi files QT 7.04

QT pro player stops without any error indication after about 1.11GB of a 1.37GB avi file. Everything is fine up to that point. VLC plays the whole file to its end.
I saw a post re a 2.0 GB limit. Anyone having the same proplem??
Thanks, Harley

I would wish that people stop using the .avi container.
I suspect a broken time stamp (time code) in your .avi file. Very common problem caused by cutting or pasting to some formats and codecs.
QuickTime Player is very rule "dependent". While other players handle the broken time stamp issue QuickTime Player stops playback when it is told the "end" of the file has been reached.
MPEG Streamclip (free) can repair broken time stamps.
The only file size limit imposed is the formatting used on the hard drive. More modern formatting schemes (HFS or HFS+) have a nearly limitless file size.

Similar Messages

I need the CODEC for Canon camera .avi files

Hello,
I am trying to "Get Media" in Premiere Elements that is a .AVI file from a Canon SD850is (compact) camera. I get the following message, "This type of file is not supported, or the required codec is not installed."
Where do I get the codec? This video plays just fine with Windows Media Player, so I assume the codec is on my computer.
Please help!
Thanks,
Scott

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
H.264 will NOT work inside an AVI wrapper http://forums.adobe.com/thread/854115
Once you find out what is inside your AVI wrapper, you will know what you need to edit
DO NOT DOWNLOAD AND INSTALL A CODEC PACK WITHOUT CHECKING IN THIS FORUM !!!
If your camera does use MJPEG, read...
MJPEG http://forums.adobe.com/thread/730396
Edit with Morgan or MainConcept http://www.morgan-multimedia.com/
http://www.mainconcept.com/site/prosumer-products-4/motion-jpeg-codec-785/information-797. html

Blocky and blurred playback of avi files in PRE8.0

I am using 64-bit Windows 7, 4GB RAM, an Intel T4300 Dual Core processor (2.10 GHZ) and an ATI Radeon HD4530 graphics card (512Md dedicated). I have the up to date ATI driver and have updated PRE 8 with the 8.0.1 fix from the Adobe site. I am using a Sony Mini DV camcorder attached to the computer by firewire.
I import my video from the camcorder into PRE 8 using capture. When video is imported it plays back very blocky and blurred on the preview screen and it is much worse on the full screen. However, when the project has been completed and burned to DVD it plays fine on TV. I have also tried playing the same video in Windows Media Player and it plays back fine with this. I may be wrong but it seems to me from this that the problem exists with the video playback facility within PRE 8.0. I have not altered any settings from the default ones set by PRE 8.0 other that to select the widescreen option when creating the project pre-sets. The camcorder is set to record the images in widescreen. I have also rendered the work area.
Are there any settngs or updates to resolve this issue? Is there a different codec I should use within PRE 8.0?
I would be grateful for any suggestions to resolve this or at least obtain reassurance that I haven't missed anything and I will, for the moment, put up with this until Adobe, or some one else, comes up with a fix.
Thanks.

A couple of things to look at, regarding playback.
1.) do your Clips have a red bar over them in the Timeline? If so, does that bar turn green, when you hit Enter? Do the Clips playback better?
2.) have you looked at changing the Magnification from Fit to 100%? Does that help? Do not know if PrE 8 has added the additional Quality setting, like PrPro has, but if it does, try both Automatic and Highest, to see if that changes things.
3.) look into Hardware Acceleration. If set to min, try max. If max, try min. If either helps, then increment, until the problem returns and then increment up/down to go back.
4.) check your OpenGL settings (probably in your ATI utility.
5.) do you have FFDShow installed (often included with CODEC packs)? That causes no end to the display problems in Adobe programs.
6.) what is your Playback setting in your Preferences?
That is about all that I can think of for now.
Good luck,
Hunt

What is the size limit for a servlet .java file?

I have been working on a jsp page with over 500 controls so I have getParameter() for those at least in my servlet. It is too big I think because the java file size is 40K but the class file is 25KB. Any sugguestion? Thanks,J

Yes, there is a maximum length for the URL but if you use POST with a form the parameters do not appear in the URL... They would if you'd use GET however.
Still, I guess it is just too much. And if that's a form a user would be supposed to fill out (usually they are supposed to do just that) they'd probably get tired and quit after the first 100 fields... 500 fields on one page is definately too much. I'd say try splitting it up to have about 10 fields on a page but then you'de have 50 pages to go through, which is less that good...
May I ask what the 500 fields are for? What data is the form supposed to process? There might be a more practicable way to solve this.

Converting avi files for FCE

Hi,
I have a ton of avi files that I need to convert for editing in FCE.
My goal: to get my avi clips into FCE so they don't have to be rendered in the timeline and everytime an edit is made. I've read several posts which suggests mpeg streamclip. My avi format is: Apple OpenDML JPEG, 640 x 480, Millions DVI ADPCM, Mono, 22.050 kHz FPS: 29.97, size: 640 x 480 pixels (this is the format listed when I open the clip in quicktime). My my final output of this FCE project is to view on HDTV (16:9) via dvd, so the best quality is what I would like.
My questions:
Is streamclip what I should be using?
And what settings should I use in streamclip to convert the avi files? (my guess would be: quicktime movie for the format) I've been trying different options under quicktime movie and the conversion leads to a jerky choppy video.
thank you!

MartinR wrote:
I'm thinking the problem is you are missing an audio codec required for this Casio Exilim video. Your camera specs say that it records MJPEG in an AVI container with a spec for WAV audio. You also indicated that the VLC media player said it was MS audio.
when I open a avi file in mpeg streamclip these are the specs that are listed under "show stream info"
Stream: CIMG1281.AVI
Path: ~/Documents/CIMG1281.AVI
Duration: 0:00:35
Data Size: 26.65 MB
Bit Rate: 6.25 Mbps
Video Tracks:
Motion JPEG OpenDML, 640 × 480, 29.97 fps, 6.17 Mbps
Audio Tracks:
DVI IMA mono, 22.05 kHz, 89 kbps
Stream Files:
CIMG1281.AVI (26.65 MB)
MartinR wrote:
Have you tried the Perian plugin for QuickTime. It adds AC3.audio support for playback of AVI files, which seems to have fixed the no-audio problem for a bunch of other people.
Yes, I have perian installed. I even tried reinstalling both to be sure.

How do I disable Quicktime for being my default player for .avi files?

When I click on a .avi file, quicktime always tells me it's unable to open it because it needs a plugin. So I use VLC media player b/c it's hassle free. When I open an avi file, I select the "always open with" option when I choose VLC. Unfortunately, I have to do that for every single avi file I put on my computer. How do I get Quicktime to stop being my default player for .avi files only? I still prefer it to be my default player, but just not .avi files.

Thanks for the link. Is this perian prefpane all I need to maximize my quicktime experience? Basically, will I never EVER see a "quicktime can't open this..." message again? Can I delete VLC media player now?
Also, what the heck is the point of the Eject button in the top right corner of the keypad. When I tried ejecting the perian "disc" that I got from opening the .dmg, it didn't work. Is that button only good for ejecting actual discs from the cd/dvd rom?

Quicktime playback of .TOD files with Perian installed

I recently purchased a JVC GZHD3 camcorder, and have had no problems playing the .TOD files in quicktime until I installed Perian 0.5 which I got from the apple website. Why did does it now say, the movie could not be opened, the movie contains and incorrect duration? Like I said, I never had any issues with playback of my recorded video until I installed Perian. What's the deal here with these HD files?
TJ

JVC says this:T here seems to be a TOD component/codec one requires, it's free and there's a link (and apaprently on the CD that came with the camera, too)
Can I use GZ-HD7/GZ-HD3 with Mac?
Yes, for playback of TOD file QuickTime can be used if the QuickTime component is installed from CD ROM supplied with the camera. Editing of HD video is possible with iMovie HD or Final Cut Pro. Both of these work with TOD file extension. Also the contents can be down converted from High Definition to DV standard thru firewire (1394) to be edited with older versions of editing software.
Can Final Cut Pro software be used to edit and create a movie (MAC)?
YES. Final Cut Pro can work with a .TOD file. But it is necessary to first install QuickTime Component, this file is located on CD ROM provided with the camera. Then from the following website:
http://software.transdigital.co.jp/products/cbsev/qceng/index.htm
Setup files for Final Cut Pro for 60i (for USA) needs to be downloaded and installed On the same page there is a tutorial link with individual sections for recordings made in FHD or SP/1440CBR modes. It shows you how to convert the file to either AIC (Apple Intermediate Codec), YUV (uncompressed) format or HDV1080i
Also the Google Gods reveal this: TOD seems to be like QT, or AVi , a container with MPEG-2 inside it:
If you are using Final Cut Pro or other professional non-linear editing programs on the Mac, you cannot use the camera's native .TOD format, which is basically an MPEG inside the .TOD container.
Forget about following JVC's instructions: they are too time-consuming and don't allow batch processing. The easiest conversion method I've found requires two freeware programs: The VLC media player, and MPEG Streamclip, both available on the Apple Website (and elsewhere).
You'll first need to use the VLC player to convert the .TOD into a .TS file, which takes seconds (you are only changing the container format to MPEG TS, not actually changing compression). Once you've changed the .TOD file to a .TS file, you can use MPEG Streamclip to change to a variety of file formats that Final Cut Pro can recognize. Of course since you are recompressing the file at this point, expect this to take far longer than the first step.
Note - MPEG Streamclip requires Apple's MPEG-2 component to edit the video.

Quicktime 10.1 not playing .avi files

My quicktime player isn't playing .avi files properly. I have perian installed and have been playing .avi files on my MacBook Pro fine now for over 2 years. However, I resently installed Lion and it doesn't seem to be working now. I've looked around and it seems there are some bugs with Perian and Lion, however I haven't seen mine. Quicktimes loads, loads the video, I can click anywhere on the timeline and see the video, however when I hit play, it immediately pauses itself and won't play. Sometimes it will play very brieftly, about 1/10 of a second, and then flicker back to paused. Is there any other integrated solution to Perian? Was hoping to not have to get VLC player.

I had this same problem and someone on here helped me solve it.
As stated, I did not have any problem and could not duplicate the original poster's problem.
See if you have DIVX For Mac installed.
Negative. I do not have any DivX components installed and am using Perian for playback. AVI (DivX5/MP3) files were created using Visual Hub under Snow Leopard. And, if I cannot get Visual Hub to work under Lion (PPC version is not Lion compatible), then I will drop AVI altogether since I only use it to send my sister clips.

My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

Hmm . . . comes with a Utility MPEG2 Component ML app with no explanation of what it's for?
The utility app is an "assistant PKG installer." It allows Lion and Mountain Lion users to install the older QT MPEG-2 Playback Component installer PKG file which is not allowed to run on its own under Lion or Mountain Lion since these operating systems already have a QT X only MPEG-2 component embedded in the QT embedded structure. Without this utility you would have to either copy the component from an older system to your Lion or Mountain Lion system, use Pacifist for installation, or manually open the PKG contents and transfer the component to the appropriate component folder.
As to your "discussion" regarding the playback of AVI file types, there are really only two strategies here:
1) You can add component support so that QT can play the files natively or
2) You can convert the file contents to compression formats that are natively compatible with the unmodified QT component configuration.
Each user should decide for his or her own self which approach best suits their needs for a particular source file. In most cases, conforming the system's codec component configuration to play the source file directly results in higher video quality since no transcoding takes place but this strategy will not work if a codec which is required is not available for the user's operating system. On the other hand, converter utilities tend to support more built-in codecs and are easier to use since the user does not have to concern him or herself with the nature of the particular source compression formats but at the risk of some potential loss in visual quality. As to what converter to use, once again this is a matter of personal choice. In the case of commercial converters like iSkysoft, the codecs are built in while MPEG Streamclip accesses the host operating system's QT codec component configuration. I personally prefer the free HandBrake app for AVI, MKV, TS, MTS, and M2TS conversions since it has an exceptionally full-featured X.264 GUI with some user options that 97% of users are likely to never use.

Is there a practical size limit on JPEG format image files?

I have noticed when working with Photoshop v7.0 on Windows XP that, when creating a JPEG format image file from a very large scanned image (more than 800 Mb, maybe), the .jpg file will usually be saved on disk at any of the possible compression ratios available, without any reported error, yet when the saved file is re-opened, an error is reported - something along the lines of "missing or corrupted end of file marker" - and the image cannot be loaded.
If before saving the original image is substantially reduced in size, e.g. by reducing the resolution of the image, a viable JPEG format file can be created, which will subsequently load successfully, though technically with data loss.
This appears to happen only with JPEG format files - PDF format files can be saved from the original image at similar JPEG compression ratios, without error on reloading.
I do not know if this also occurs with any other Photoshop versions. I am working with Adobe Photoshop v7.0 on Windows XP, although we are preparing to upgrade to CS (which version I don't know) in the near future, for different reasons to those which are detailed above.
Does anyone know if there is a technical explanation for this behaviour? Is there a file size limit for writing viable JPEG files (which Photoshop does not report as an error when exceeded)?
Thanks

Chris Cox wrote:
Where did you get the idea that we weren't doing something about it?
that's what I gathered from "JPEG cannot [...] in Photoshop (code difficult to replace)".
But if you say this is in the works right now, that's good news indeed.
Chris Cox wrote:
And where did you get the idea that posts get deleted? (other than SPAM)
Are you sure you're reading the same forum as the rest of us?
That's what happened:
The content you posted below was reported for abuse and removed by our
moderators:
Subject: Re: Is there a practical size limit on JPEG format image files?
Posted: 4/29/11 9:11 AM
Anyway, you gave an honest answer on this technical issue, Chris, and that's what counts.

Help with AVI files on Desktop!!

I have two AVI files on the desktop that I want to put into imoive to edit them, but imovie won't import them. I tried by going to the import movie under file but they are both grayed out. THen I tried to rename them, but still they were grayed out. Please someone help!!!

I have two AVI files on the desktop that I want to put into imoive to edit them, but imovie won't import them.
iMovie '08 will only import files which it can edit. If audio and/or video compression format is not editable, then it will not import. For instance, many AVI files use DVI ADPCM compressed audio with M-JPEG video. In this case the audio is not compatible but the video is so the file will not import. In such a case you would have two options. The first is to change the audio, keep the video an import the modified file. The easier option would be to use a conversion application like QT Pro ($30), GarageBand (included in iLife), MPEG Streamclip (free), FFmpegX (donation-ware), Visual Hb (pay-ware) or a similar application to convert both audio and video to iMovie '08 compatible files for import. In most cases, even iMovie HD (free download for iLife users) will convert AVI files as part of the import process.

Some avi-files not playing on QuickTime Pro 7.0.4

I tried to play a few avi-file movies using QuickTime Pro 7.0.4 on my Mac OS X 10.4.4, but unfortunately, I keep getting the message: "Some necessary QuickTime software is missing. It may be available on the QuickTime Web site." After going on that site, I downloaded some of the available free software, but the problem remains. Playing the movies with a third-application like the VLC, works fine. I wish QuickTime Pro would have the same capabilities in playing avi files like other Players. Do you have an idea how I can solve the problem?
Thanks for your support!
iBook G4 1GhZ Mac OS X (10.4.4) 60GB, 640MB RAM, Bluetooth, Airport Express

Thanks for all your help guys. I guess I will remain with the VLC for playing AVI files that donnot play on the QT Player as the VLC plays almost any movie file. I came across an interesting article regarding the subject:
QuickTime: About Playing .AVI Files
Learn why an .AVI file may not play as expected in QuickTime Player.
AVI stands for Audio Video Interleave. The .AVI format is what is known as a container format. It specifies a way in which a file may contain audio and video data. It does not specify how that data is encoded. The encoding of audio and video data is specified in what are known as codecs. A codec (short for COmpressor/DECompressor) tells the computer how to decode the audio and video tracks that have been encoded within the .AVI file. QuickTime Player can use numerous codecs by default. You can also add additional codecs to extend QuickTime's features using plug-ins or third-party installations.
When QuickTime opens an .AVI file, it checks to see which codecs were used to encode the audio and video tracks within it. For example, an .AVI file may contain a video track encoded in the Cinepak codec and an audio track encoded with the ALaw 2:1 codec. If both the audio and the video were compressed using a codec that QuickTime can use, the file will play normally. If the audio or video or both were created using codecs that QuickTime cannot use, you may see a message like the following:
"QuickTime is missing the software needed to perform this operation. Unfortunately, it is not available on the QuickTime server"
or
"You may experience problems playing a video track in "filename.avi" because the required compressor could not be found."
These messages are not an indication that anything is wrong with QuickTime Player.
Lists of audio and video codecs included with and supported by QuickTime are available from the QuickTime specifications page.
Using QuickTime Player, you may be able to determine which codec was used to compress an audio or video track:
QuickTime 6 and earlier
Open the file in QuickTime Player.
From the Movie menu, choose Get Movie Properties.
From the left pop-up menu in the Properties window, choose Sound Track or Video Track.
From the right pop-up menu, choose Format. The Format section shows the codec.
QuickTime 7
Open the file in QuickTime Player.
From the Window menu, choose Show Movie Info. The codec is listed next to Format.
If the .AVI file is encoded using a codec that is not included with QuickTime, you might be able to find and add that codec so QuickTime can play media encoded with it. Contact the party that publishes or distributes the codec to see if a QuickTime version is available. Many third-party QuickTime components are available on the QuickTime components page.
iBook G4 1GhZ Mac OS X (10.4.4) 60GB, 640MB RAM, Bluetooth, Airport Express

Poor quality of AVI files playback in Adobe Premier Pro CS6

I tried to play back AVI files loaded from Canon GL2 camera by Premier Pro 2.0. In Adobe Premier Pro CS6 playback I got jitters and poor quality - what is the problem?

1st - More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
2nd - Exactly what is inside the AVI file?
Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Converting .avi files for use in iDVD

I have multiple .avi files that I'd like to add to a DVD using iDVD. These files are in their original format at 30 kb/sec and not compressed at all so they are HUGE...totaling almost 20G.
What is the best way to convert these files so that they can be imported into iDVD and fit on a single DVD. The files would be about an hour and a half playing time so I am hoping that can be done. I realize quality may be compromised but I'm willing to lose a little bit.

Roxio Toast is your best option IMO but if you want to stay within the iApps then you'll first have to add the avi files to iMovie => iDvd. That or use a third part app likeMpegStreamclip (free download):
I suggest you do not exceed 120 mins playback for SL Dvd-R
Hope this helps but if not just come on back.
Message was edited by: SDMacuser

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
In order to determine what compression formats wewre used in your AVI files you can
1) Try checking the Finder "Info" window,
2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
3) Use a general media utility app like "MediaInfo" to read the file characteristics.

Arbitrary limit for playback of avi files QT 7.04

Similar Messages

Maybe you are looking for