Arbortext(XML) import to Framemaker Error
I am trying to import XML files from Arbortext editor off of Documentum and I can not get them to import into FrameMaker without an "error in processing external entity reference." I am trying to get the files into FrameMaker so I can create an EDD using the DTD from XML file. Is there anyway to import the file or atleast save the DTD in arbortext to use in framemaker?
First you need to find the correct DTD - that is what is used to initate the EDD creation process...
When exporting a document from Documentum (using the export menu choice), Documentum normally will export all the files to the local file system in the location that you specify. It fixes up all the references so that they are local file system references and also fixes up the Doctype to point to a local copy of the DTD. The DTD and any other associated files (generally the entity files) that it references are typically downloaded to a folder in the same location that you exported the files to using the name of the repository. So if your repository name was "repo1" then you would have a folder in your export location called repo1 that has the DTD and other files. You can look at the doctype of the file that you exported and verify the location.
That is the DTD that you need to import into Frame to begin your EDD construction process.
It is possible that your DTD is not imported or correct in Documentum. If you are currently using Arbortext to edit the files, then it is possible that Arbortext is using the public identifier to locate a separate copy of the DTD using its catalogs. In this case the DTD will be in the Arbortext installation tree or if your IT has set a public shared doctypes folder it could be somewhere else.
I know this is clear as mud but it depends a lot on your system infrastructure setup.
First look in the Documentum export folder and see if that is the DTD you expect. If not, then look in the doctypes folder for Arbortext and see if the DTD you expect is there. Then if that fails see if your IT has pointed your Arbortext to a shared folder somewhere.
Good luck - Jim
Similar Messages
-
XML import raises application error / event code "AVAA0-3208-0"
I receive an application error when trying to import a specific XML file. Other XML files, that have been created with the same tools and sequence but from another MS Project file, can be imported without an issue.
There is no warning or error in Primavera's log file.
Here is the error message's content:
Type: EAccessViolation
Event Code: AVAA0-3208-0
Description: Access violation at address 01136627 in module 'PM.exe'. Read of address 00000000
Object: TVUltraButton
Context: TfrmWizImport.RunImportWizard / TDevxMainForm.actFileImportExecute / TCFormManager.SetToolbar / TDevxMainForm.BeforeFormShow / TfrmLogin.FormCreate
Primavera version: R8.3.2
OS: Windows XP (NT5.1) SP3
Has anyone an idea about what the root cause (XML content issue) might be?based on the details provided, this is not a permission issue since you are able to import other similar MSP XML files so it could be a data issue in the XML file being imported.
Can you try modifying the XML file and remove activities and just keep a few activities, then save as a new XML file and try again. I think you can try narrowing down the issue with some tests to see if it's a problem with the XML or not. -
Error messages during XML import of Project Pro 2010 files
Hi folks,
I'm trying to diagnose a couple of sick Project Pro 2010 files loaded from Project Server by saving them locally as XML files and then reimporting (not connected to the server during import). The anomalous behavior exhibited by both files
is that one takes 15 minutes to load from the server, while another takes over 20 minutes. These are not typical load times for this server. In both cases, Project consumes about 25% of the CPU during the load process. There's little network I/O
while this goes on, and when externally linked schedules are loaded to the cache, they load very quickly. Other than the long load times, the schedules appear to be behave normally, except for some very odd print preview behaviors in one of the schedules
that I asked about in a different thread (among other things, the default print preview start date is 17 years after the default finish date, and the finish date is about 11 years before the schedule actually starts).
The questions I'm asking here are about errors I see when I try to import the files exported as XML, and whether they might provide any clues as to what's causing the load time issues.
When attempting to import one of the files saved as XML, a pop-up appears that says, "The actual finish date is before some of the previously entered timephased actual work values. If you continue with this operation, Project will truncate
some of the previously entered timephased actual work values. To continue, click OK..."
When attempting to import the other file saved as XML, I get a series of pop-ups identifying a series of tasks that say, "The timephased edit will cause 'Develop Requirements Review Meeting Mi...' to start before 'Conduct Requirements Review"
finishes. As a result the task link cannot be honored. You can: () Continue. Keep the timephased edit and ignore the link. () Cancel. Ignore the timephased edit. (OK/Cancel/Help)".
Interestingly, both files contain external Project Server predecessor / successor links. In the case of the first file, the XML import just appears to strip those out. In the case of the second file, I get a long series of pop-ups (with
some buggy text inserts) in pairs. The first message in the pair is typically "An import error occurred. The element <PredecessorLink> in the <Task> element with <UID>=611 has invalid data. Verify that the file
name and path are correct, and then try again. (OK)", where the indicated UID varies. The second pop-up in the pair appears to have a buggy text constructor and looks like this, with "[stet]" indicating the apparent buggy text inserts,
"An import error occurred. The element [stet] Verify that the file name and path are correct, and then try again. [stet] in the 309 element with <UID>=7 has invalid data. [stet] ^4 (OK)"
In the second pop-up of the pair, the "xyz element" varies, but the "<UID>=7" reference and "^4" are consistent. In the XML, UID 7 appears to refer to a calendar, a task which includes a number
of entries similar to:
<TimephasedData>
<Type>24</Type>
<UID>7</UID>
<Start>2014-10-03T08:00:00</Start>
<Finish>2014-10-04T08:00:00</Finish>
<Unit>2</Unit>
<Value>PT8H0M0S</Value>
</TimephasedData>
... and to an assignment:
<Assignment>
<UID>7</UID>
<TaskUID>10</TaskUID>
<ResourceUID>-65535</ResourceUID>
<PercentWorkComplete>100</PercentWorkComplete>
which includes blocks like:
<TimephasedData>
<Type>2</Type>
<UID>7</UID>
<Start>2014-10-17T08:00:00</Start>
<Finish>2014-10-17T17:00:00</Finish>
<Unit>2</Unit>
<Value>PT8H0M0S</Value>
</TimephasedData>
Eventually, the second file also does load with no external file links indicated.
Again, I'm just looking for anything that might be a clue to the long Project Server load times.
Thanks in advance,
LPSlow performance can come from a number of different things. Without knowing more detailed information about your setup or workflow, it's difficult to accurately troubleshoot.
-What kind of Mac are you using?
-What is your source format?
-Where is your source footage located? -
XML import - stopped due to "critical error"
Hi all. For the moment, I'm still working with FCS1/FCP 5.1.4, OS 10.4.11.
In the past, when I've needed to open a project I've started on other machines running 6.0.x, I've done an XML export, and imported said xml file into a new project on my machine. If I recall correctly, XML type 2 worked just fine.
Well, it doesn't work now, and I'm wondering why?
The machine I'm exporting from is running OS10.4.11, and FCP 6.0.3. I've exported the project out of there in all flavors of xml (1,2,3 and 4), with and without clip metadata. And I get nothing on import, bupkus, nada, zilch and zero...except for the oh-so-helpful message "XML import stopped due to critical error"
So who broke this?I've had this happen to me when the original project contained sequences that used filters not supported by 5.1.4.
My solution was to strip out suspect filters until it worked.
Best,
Tom -
Sub Agreement XML import error: XML import could not process field: CONTRACT_UNIQUE_DOC_NAME
Hi All,
I am importing Sub Agreement in XML format and getting below error.
XML import could not process field: CONTRACT_UNIQUE_DOC_NAME
unsupported null bind parameter no. 0
Below is the XML.
<?xml version="1.0" encoding="UTF-8"?>
<sapesourcing xsi:noNamespaceSchemaLocation="Contracts.xsd" defaultlanguage="" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<objects>
<object classname="contracts.Agreement">
<fields>
<CONTRACT_UNIQUE_DOC_NAME>P-XXXX-00001</CONTRACT_UNIQUE_DOC_NAME>
<DISPLAY_NAME>Testing Agreement Name 1 </DISPLAY_NAME>
<CALC_METHOD>UNIT_PRICE_ENTERED</CALC_METHOD>
<UNIQUE_DOC_NAME>S0002510</UNIQUE_DOC_NAME>
<STATUS>In Process</STATUS>
<COMPANY>TEST</COMPANY>
<LOCATION>Location_114</LOCATION>
</fields>
</object>
</objects>
</sapesourcing>
If anyone is successful in importing Sub Agreement in XML format? also please validate the above xml structure?
Note: I am able to load Sub Agreement using CSV. But in our scenario data comes in XML format.
Thanks & Regards
SaiHi Gary,
I am able to load below objects in XML format without any issues. And I am using Scheduled Task of type “Data Import Monitor” to load them.
1) Project (1100)
2) Master Agreement (1004)
3) Extension Collections for Project
4) Extension Collections for Master Agreement
1) Working XML Structure for Project(1100) .
<?xml version="1.0" encoding="UTF-8"?>
<sapesourcing xsi:noNamespaceSchemaLocation="Projects.xsd" defaultlanguage="" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<objects>
<object classname="projects.projects">
<fields>
<UNIQUE_DOC_NAME>S0004392</UNIQUE_DOC_NAME>
<DISPLAY_NAME>Test Project</DISPLAY_NAME>
2) Working XML Structure for Master Agreement (1004) object.
<?xml version="1.0" encoding="UTF-8"?>
<sapesourcing xsi:noNamespaceSchemaLocation="Contracts.xsd" defaultlanguage="" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<objects>
<object classname="contracts.Contract">
<fields>
<UNIQUE_DOC_NAME> 00215944</UNIQUE_DOC_NAME>
<DISPLAY_NAME>TEST MA</DISPLAY_NAME>
<DOCUMENT_DESCRIPTION>Contract Desc</DOCUMENT_DESCRIPTION>
3) Working XML Structure for Extension Collections for Project(1100).
<?xml version="1.0" encoding="UTF-8"?>
<sapesourcing xsi:noNamespaceSchemaLocation="Projects.xsd" defaultlanguage="" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<objects>
<object classname="projects.projects">
<fields>
<UNIQUE_DOC_NAME> S0004392</UNIQUE_DOC_NAME>
</fields>
<collections>
<Z_DETAILS replace="true">
<object classname="extension_collections">
<fields>
<NAME>Sai</NAME>
<EMAIL>[email protected]</EMAIL>
</fields>
</object>
<object classname="extension_collections">
<fields>
<NAME>Krishna</NAME>
<EMAIL>[email protected]</EMAIL>
</fields>
</object>
</ Z_DETAILS >
</collections>
</object>
</objects>
</sapesourcing>
4) Working XML Structure for Extension Collections for Master Agreement (1004).
<?xml version="1.0" encoding="UTF-8"?>
<sapesourcing xsi:noNamespaceSchemaLocation="Contracts.xsd" defaultlanguage="" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<objects>
<object classname="contracts.Contract">
<fields>
<UNIQUE_DOC_NAME>00215944</UNIQUE_DOC_NAME>
</fields>
<collections>
<ZLINKS replace="true">
<object classname="extension_collections">
<fields>
<LINK_NAME>SAP</ LINK_NAME>
< LINK_URL> http://www.sap.com/index.html </ LINK_URL >
</fields>
</object>
<object classname="extension_collections">
<fields>
<LINK_NAME>SCN Sourcing</ LINK_NAME>
< LINK_URL>http://scn.sap.com/community/sourcing</ LINK_URL >
</fields>
</object>
</ ZLINKS >
</collections>
</object>
</objects>
</sapesourcing>
Could you please help me with the right XML Structure for Agreement( 1003)?
Regards,
Sai -
Hello ODI Gurus,
I am getting a nullpointer exception while importing an Interface. I tried all modes. I have few more interfaces in the same folder which got imported successfully. The error message is also not very helpful. What could have possible gone wrong? Any suggestions?
-snehal
The error:
XML Import Error
java.lang.NullPointerException
at com.sunopsis.dwg.dbobj.j.b(j.java)
at com.sunopsis.dwg.dbobj.j.a(j.java)
at com.sunopsis.dwg.dbobj.SnpTxtCrossR.batchCrossRefComputing(SnpTxtCrossR.java)
at com.sunopsis.dwg.i.a(i.java)
at com.sunopsis.dwg.DwgObject.a(DwgObject.java)
at com.sunopsis.dwg.DwgObject.doImport(DwgObject.java)
at com.sunopsis.dwg.DwgObject.importFromXml(DwgObject.java)
at com.sunopsis.graphical.l.ow.e(ow.java)
at com.sunopsis.graphical.l.ld.b(ld.java)
at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
at java.lang.Thread.run(Thread.java:619)
----------------------------------------------------------------------------------------------------------------------------------------I am also getting a XMLImport error (nullpointer exception) while importing an Interface and Packages..
Can any one help me out....
Error is:
java.lang.NullPointerException
at com.sunopsis.dwg.DwgObject.computeNextId(DwgObject.java)
at com.sunopsis.dwg.DwgObject.getNextId(DwgObject.java)
at com.sunopsis.dwg.dbobj.SnpPackage.duplicationComputeNewPrimaryKey(SnpPackage.java)
at com.sunopsis.dwg.h.a(h.java)
at com.sunopsis.dwg.i.a(i.java)
at com.sunopsis.dwg.DwgObject.a(DwgObject.java)
at com.sunopsis.dwg.DwgObject.doImport(DwgObject.java)
at com.sunopsis.dwg.DwgObject.importFromXml(DwgObject.java)
at com.sunopsis.graphical.a.oy.f(oy.java)
at com.sunopsis.graphical.a.lf.b(lf.java)
at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
at java.lang.Thread.run(Unknown Source) -
When running the xml importer, we are getting the following error with a script that has never had any problems before:
Exception in thread "main" java.lang.UnsupportedClassVersionError: org/xml/sax/Locator (Unsupported major.minor version 48.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:488)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:106)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:243)
at java.net.URLClassLoader.access$100(URLClassLoader.java:51)
at java.net.URLClassLoader$1.run(URLClassLoader.java:190)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:183)
at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:288)
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:310)
at oracle.adf.mds.tools.xml.importer.common.XMLImportHelper.getPackageAttribute(XMLImportHelper.java:91)
at oracle.jrad.tools.util.PathUtils.getDocName(PathUtils.java:139)
at oracle.jrad.tools.xml.importer.XMLImporter.doImport(XMLImporter.java:268)
at oracle.jrad.tools.xml.importer.XMLImporter.main(XMLImporter.java:79)
Has anyone seen this before?Seems the class file is corrupt.
http://forum.java.sun.com/thread.jspa?threadID=319110&messageID=1287442
Ask your DBA to refresh your env with the file from a instance where this is working.
Thanks
Tapash -
FCPX XML import error "edit frame boundary"
Hello,
I'm attemting to import an XML file into FCPX from Davinci Resolve and am continually getting an error log message which contains the following: "the item is not on an edit frame boundary." I'm working with raw CDNG files from a 5D Mark III in Resolve and trying to export quicktime files in a roundtrip workflow.
I'm working on a 23.976 timeline and everything appears to be set up correctly in Resolve. It exports the quicktime files and the XML file. When I import the XML into FCPX, the error code appears (see below). The new clips appear in a new event and a project is created, but the project settings have changed from "1920 x 818" to "1280 x 720" and the frame rate has changed from 23.976 to 60p. These settings cannot be modified in the project settings. I can see the new timeline but it doesn't play normally. I think it has something to do with a framerate mismatch or timecode problem, but I'm not sure, I've checked everything I can think of. Incidentally, the other side of the workflow (exporting XML from FCPX to Resolve) works just fine. Really hoping to be able to take a graded timeline back into Final Cut for finishing. Any ideas would be appreciated.Hi,
You open XML file you will see xml file will contain many task tag <Tag>
<Task>
<UID>1</UID>
<ID>1</ID>
<Name>task1</Name>
<Active>1</Active>
<Manual>1</Manual>
<Type>0</Type>
<IsNull>0</IsNull>
Every task will start with <Task> and task Name will come as <Name>task1</Name>. You can find all the line with <Name>task1</Name> then you can copy all the task in excel truncate <Name> and <Name>
then you will have only name of the task then in the 2nd column of the excel you can paste tasks from MPP fiel then you can check easily which task is not present in the xml file.
kirtesh -
I am seeking an XML import Handler for DITA files? I created
one in RoboHelp, but the DITA files failed the test import. I could
not figure out how to correct the error (in an entity declaration),
although I tweaked the catalog, the Handler, and everything else I
could think of.
The DITA files are created using Structured FrameMaker 7.2. I
have RH 6, but not WebWorks Publisher, so I would like to find a
way to use RoboHelp, rather than trying to generate WebHelp
directly from DITA or using any other HAT. The framemaker-dita
users group listserv has not provided me any leads.
Please let me know at vlipow at brendan dot com.
Thanks!> Please let me know at vlipow at brendan dot com.
Hello all, I have the issue of DITA import in RH too and if
any solutions or ideas exist, please post in forum for general
interest. -
How can I get all of my graphics to import from FrameMaker?
I am evaluating Robohelp HTML version 9, which I'm considering using for single-sourcing FrameMaker 7.1 files.
I imported my FrameMaker files, and only 2 out of 75 graphics were imported.
The results window shows that all FM files were imported successfully.
However, in the Project Manager, only these two files appear.
The graphics are BMPs, the same as all the other graphics.
Everything about them seems to be the same as all the other graphics.
So I prepared a TEST FrameMaker file. I placed the two graphics that had imported successfully first, along with a selection of the other graphics. Guess what? All of the graphics imported successfully into RH.
Feeling optimistic, I imported my FrameMaker project into RH again, using the same TEST RH project. Guess what? Only the two original graphics appeared and no others.
Can anyone help me solve this mystery?
Thanks so much!Sounds like an issue with an individual graphic, not with the process itself. If the 2 successful graphics are the first or last in your project, I'd start testing by importing the graphics in closest proximity...otherwise you may have to import in batches to find the offending file.
If you have a graphic in a format other than that of the "successful" graphics, you may want to test that format in particular.
One thing to consider: As I'm sure you know, any missing resources (fonts, graphics, xrefs) and any errors in updating your book will keep FrameMaker from operating smoothly. If you are sending FM info elsewhere (PDF, HTML, Help) then these subtle deficiencies can cause problems with info sent out of FM as well. "Fix" your FM files and you might solve seemingly unrelated issues elsewhere.
*Note: You mentioned you're testing single sourcing...FM7 files will require import to RoboHelp. With an eval copy of TCS3, you'd be able to create a link to FM10 files, allowing you update the RH9 via the FM10 files. It is a similar process, but by linking, you'll eliminate the importing and/or post processing of the HTML and significantly reduce the time needed to update your RH content.
Also, when purchasing Adobe product, consider Suite purchases and maintenance contracts...I save tons of USD by doing this. See the math at http://blogs.roundpeg.com/2009/12/strategies-for-purchasing-adobe-software/
-Matt -
Insane XML Import, Huge Project, Duplicate file names work around...
I planned on kicking off my journey attempting to edit a massive multi year documentary on FCPX with a nice introduction of the blog I'm going to keep about the experience, but I've run into a bit of a roadblock, or maybe major speed bump at least before even getting to that point. I wanted to share what is working as a work around for me and you guys can tell me how I'm doing it wrong.
Ok, I will try to explain this as succinctly as possible. I'll write in somewhat stream of consciousness just to try and get through it quicker... Basically, after discovering the work around below, I am now utterly confused on how FCPX handles the relationship between its own database of where media is stored, and the actual media itself. I have plenty experience on FCPX now, probably done 30-40 pro commercial jobs on it over the last year since XML became doable as I'm also a Resolve Colorist and all the FCPX projects where hardcore coloring product spots. For commercial work, I never needed to worry about splitting up footage up over multiple Events. Everything, all in one, FCPX handled it no problem. (well the occasional beach ball, but that seems to be a thing with FCPX in general)
This will be my 10th feature documentary as an Editor. Every one before it was either on Avid's many flavors over the last 12 years or FCP Studio. When this new film came along, I made the decision a few months ago to use FCPX for a few reasons, but mostly because I'm insane and I like to try to mix it up for myself in a career that can get stale quick if you aren't willing to be that way. The film was shot over 2+ years, every shoot was multi cam 5D (yes i know, looks great, but please kill me), I haven't done the math on length, but there is over 10,000 clips of video (this is actually medium in size compared to what I've dealt with before). Its 5D, so theres external audio for everything. FCPX's syncing is great, but I've learned that theres an unsaid window of heads and tales clips must fall within to sync properly with the nearby clips, if they are too far apart FCPX gives up. One shoot day could have 3 cams, 50 clips each, and 2 audio files to sync to, FCPX simply cannot handle this, so off to Plural eyes they went, no problems.
Ok, all this is relevant eventually I swear! Again, in the past, all in one event, no problem. I tried for fun to bring all media into one Event on this film. It worked, but there is a 10+ second spinning beach ball for every single move you make, so thats no good. Ok, I'll separate the Events out to, lets say, each shoot month. Well that's dumb, in verite documentary, any shot could be the first, any shot could be the last, you need a command over all searchable footage at all times. Shift selecting all events to search *****, and it actually takes longer for FCP to reload each event each time than it does to just have the one massive one. So no go there. Next hair brained idea... What if make a new Event that is just Compound Clips of all the other Event's contents and do more with Markers and Favorites in logging that I was planning to parse it all out. That way I'm working with and FCPX is dealing with 50-60 clips instead of 10,000+ Quick test, Cmd-A, Opt-G, boom, boom, boom, move all to dedicated to Event, hide huge Event, BEHOLD, that works! FCPX chokes a little bit on the insane length of some of the clips, but searching, and general performance is back on par!
So your saying to yourself "Ok *********, sounds like you figured it out, what's the problem." Well to you I say, "Not so fast!" Remember, that was just a quick test using the media I had imported into the massive 10,000+ clip Event. To do this project proper, I am having to import Multicam sync'd XMLs from Plural Eyes. And this is where it all starts to fall apart. A little foreshadowing for your eager eyes. 10,000+ files all shot with multiple 5D's over the course of years. What does that mean? many, many duplicate file names!
FCPX as well all know irritatingly imports XML's as new Events, not into existing ones. This obviously takes a lot of burden off media management because with a new Event comes a new database referencing its own version of the raw media. All well and good, and I'm betting its starting to click for some if you advanced users where I'm finally going with this. So I have 50 or so XMLs to bring in, all done no problem. Now I want to replicate that singular Event like I did with the Compound Clip test and have it all in one place to be my master as extensive logging begins for easy searching once editing begins. Highlight the Events, click Merge Events. NOPE. I get a new "Kill Yourself Now" error (a term I coined for Out of Memory and General Error messages in FCP Legacy meaning there ain't much you can do about it): "Two or more files have the same name. Change the names and try again, because I don't know what the **** to do with them." Ok I made up that last part but that's basically what it's saying. Just take the variable out of the equation, this happens with every which way you could try to get the clips together. Merge Events, dragging events on top of each other, dragging just the Multicam clip alone, nothing gets passed that message. What's worse is that while Batch Renaming seems like a solution, the renames do not populate inside the created clips and there is no way to Batch Rename those. Renaming everything at the finder level isn't so great because then I'd have to resync and theres an offline/online thing going here where the film has to be reconformed eventually.
Basically, I've found that FCPX handles media management in completely different ways depending on whether you are importing into one Event yourself or doing essentially what is a new import with FCPX moving or merging Events. If you bring in all the media to one Event, on a macro level FCPX goes through file by file making aliases referencing the master file. If it hits a duplicate, it makes a parenthesis counter, and keeps going. And with the genius of FCPX metadata, that file name doesn't even matter, you can change it at the Finder level and FCPX will keep the link intact. BUT for some reason if you try to do this outside the realm of a single Event and combine files after the fact a different process takes over in creating this database system and can't handle the duplicates. I can't totally figure the reason other than it probably is scared to change the originally referenced alias to something else (which it shouldn't be scared of since Merge Events deletes the original anyway).
This is where it gets INSANE and where I lose all understanding of what is going on, and believe me it was a delicate understanding to begin with. It comes in to play with the work around I figured out. I make the master Event with the 10,000+ clips. Then I import all the XMLs as dedicated Events. Now, I then drag the Multicam clips into the master Event, it WORKS! just takes it, no "Kill Yourself Now" error. Stranger still, now with the switched referenced Event, it even takes into account which aliased duplicate file name it's referencing in the Original Media folder. Somehow, it's taking into account the original file path and saying "Ok, I see 5 instances of MVI_5834.mov. Based on the original file path or maybe creation date or god knows what, it must be MVI_5834 (fcp3).mov." It connects perfectly. I can even remove the old XML imported Event with no problem. Crazier yet, I can now move those again to the dedicated Event I wanted originally that only contains those Multicam or Compound Clips.
So instead of going straight from A to C, going from A to B to C works even though that actually seems way more complicated. Why can't FCPX handle Merge Events and dragging clips the same way it handles media imported into a single Event. And weirder still, why can't FCPX handle the (fcp1,2,3...) appending in the same scenario. But if the appended links are already there, No Problem. And for the love of god, it'd be nice to important XML's into existing Events and make the correct referencing happen right from the get go, which is really the source of all the above headache. I'd have no problem helping FCPX with a little manual pointing in the right direction just like any other NLE needs.
Ok, having said all of that crap above, my question is, have I missed something completely simple I should have done instead? Now that I have everything in place how I originally envisioned, I think I will still play around a little bit more to make sure FCPX is really going to be able to handle this project. I'm at a stage right now where going another direction is still an option, although the dare devil in me wants to make this work. Media management aside, once you start editing on a FCPX timeline, its hard to go back to anything else. Apple is going to have to figure out some way not to access to everything at all times to work fluidly or big projects like this are never going to be practical in FCPX.
Sorry for the long confusing post....I'm having the exact same problem, but I know nothing of ruby scripts. I've exhausted my resources with tech support, and after literally hours of work with them it seems I now am faced with either re-rating each individual song, or pointing iTunes to each song that it can't locate. Is yours a solution that could help me? How can I find out more about Ruby Scripts? Thanks for your help, hellolylo (or anyone else who might also be able to help...)
Kenn -
[CS2][AS] Make XML import map is calling a refresh on styles?
If this can be of use to someone else... it's probably not CS2,AS specific.. but this is what i use.
It's the second time i have a bug like this, where changing the order of my calls is fixing the problem. With this one, i was getting random missing font error (times(1)) while batching documents(wich make the batch script batch crash as there is a modal dialog open). Not always on the same document, it was really fustrating as i was not able to get my finger on the problem!
I actually knew the source of the problem as i had added a fix (maybe not the best solution, but it was working well) that actually was removing the style from all the text frame (i noticed that using map style to tag was not always working well(when text frame had overriden?), so that's why i added code to reset the style before doing a map. But i was not understanding why it was happening so randomly...
I tought at first it was happening during save (as it reopen the document) but after a few experimentation it looked like it was occuring during the import map redefinition (See code below: make XML import map with properties {markup tag:tStyle, mapped style:tStyle}).
Looks like the make XML import is calling some sort of document refresh wich then pop the font missing dialog (even with never interact as script preferences!)! (missing font is actually a bug i had also in other circumstances.. exemple when you have a extra return at the end of a tagged text (outside the tag)). A bit unexpected, i really tought that creating a xml import map was just creating data structure in document model to be used later on by the auto style call...
The problematic script:
tell application "Adobe InDesign CS2"
set myDocument to document 1
tell myDocument
--Reset styles.
set applied character style of every text of every text frame of every spread to character style 1
set applied paragraph style of every text of every text frame of every spread to paragraph style 1
--Create a tag to style mapping.
set tList to name of every XML tag
set tNumItems to count of tList
repeat with i from 1 to tNumItems
set tStyle to item i of tList
make XML import map with properties {markup tag:tStyle, mapped style:tStyle}
end repeat
--Map the XML tags to the defined styles.
auto style
end tell
end tell
And the working solution (just moved the reset of style after the import map creation loop):
tell application "Adobe InDesign CS2"
set myDocument to document 1
tell myDocument
--Create a tag to style mapping.
set tList to name of every XML tag
set tNumItems to count of tList
repeat with i from 1 to tNumItems
set tStyle to item i of tList
make XML import map with properties {markup tag:tStyle, mapped style:tStyle}
end repeat
--Reset styles.
set applied character style of every text of every text frame of every spread to character style 1
set applied paragraph style of every text of every text frame of every spread to paragraph style 1
--Map the XML tags to the defined styles.
auto style
end tell
end tellit doesnt print any server control message. in my "page_404.jsp" I am printing current date and time (to check if the server visited that page) everytime when i refresh "index.jsp" the server goes to "page_404.jsp" and prints the current date and time.
so basically the only message which the console shows is the current date/time which i am printing in the "page_404.jsp"
Thanks. -
Using XML Import/Export in Transport Connection
Hi, I was investigating the feasibility of copying a query definition from one BW system to another using the XML Import/Export functionality in Transport Connection. This is not to replace our current transport process across the landscape (Dev -> QA -> Prod), but merely just looking at possibilities for end users who develop queries in QA & then recreate them in Prod.
My question is: has anyone worked with the XML Export/Import for types Queries & Query Elements? I was trying this out between a Dev and Sandbox system and only had limited success. I was able to take a small query and perform the Export to a local .xml file without much difficulty. But when I try to do the Import, my query never shows up. The Import function shows a green light, but I get a couple of error messages on the Import such as the following:
==========================================================
SAP object 3WROG4HZ3NKP1PIYHCR1H24CQ () cannot be imported
Diagnosis
You attempted to import SAP object 3WROG4HZ3NKP1PIYHCR1H24CQ of type into the system via the XMI interface. However, you are not allowed to import SAP objects.
System response
The object was ignored during the import.
Note: It can be that the import is incomplete when the required SAP objects are still not active in the system.
Procedure
Install the specified objects from Business Content. Only import the metadata afterwards.
=========================================================
The portion returned for Saving and Activating returns green lights. The two sample objects mentioned appear to just be custom InfoObjects used in my query & don't look to be any different than others that work OK.
Just curious if anyone else has worked with this and could help advise.
Thanks... JodyThis is an old subject, but I think XML import only works for datamodeling objects like InfoObjects, InfoCubes, and ODS objects. If you try to export a query, and open the XML file in a text editor, there is not enough information (in my opinion) to build the query. As an example you don't see how key figures are to be displayed, filter or free characteristics.
However, when an InfoObject is collected, you get all the attributes, texts in all languages.
If anyone has more insight, please enlighten us.
-John -
Convert Arbortext XML files to RoboHelp
We are converting XML files from Arbortext to RoboHelp. Does anyone know how to conver the files? We would like to import or convert the files and remove the XML code Arbortext automatically adds to the files.
Thanks! SandyAre you talking about the XML comment Arbortext puts into the top of the document or the Processing Instructions?
If the first, Arbortext does insert an XML Comment at the top of the file. XML Comments do not affect the XML content and this should not affect your processing. For example, if you import DITA files created in Arbortext into TCS 4 or 5, they open and process just fine. I've had no problems importing Arbortext XML into TCS4 and exporting files via RoboHelp.
If you're talking about the processing instructions, they are unnecessary to retain and very easy to remove via a setting in Tools Preferences. The instructions to turn off Processing Instructions are here: http://blog.single-sourcing.com/2010/08/pesky-pis/ -
Portal XML Component Application Parse Error
Has anyone tried to use Portal's XML Component application to pull XML data out of iFS via URLs successfully? I've loaded an XML instance and XML style sheet in iFS (that parse fine in XMLSpy) and tried to display them using the Portal XML Component application. I've also tried to cut/paste the instance and style sheet in to the Component's GUI directly and received the same error. The component finds the files in iFS fine, but generates the following error:
Start of root element expected. at oracle.xml.parser.v2.XMLError.flushErrors(XMLError.java) at oracle.xml.parser.v2.XMLError.error(XMLError.java) at oracle.xml.parser.v2.XMLError.error(XMLError.java) at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java) at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java) at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java) at oracle.webdb.xmlcomp.XMLTransDoc.Transform(XMLTransDoc.java:136)
Oracle's sample data works fine too..
Seems like a basic error, but I can't correct it.. THanks in advance for any help, Timtrying files again..
XML instance:
<US_FOREIGN_MISSION>
<ap>
<metadata>
<administrative>
<identifiers/>
<publisher>
<organization agency="AFMIC"/>
</publisher>
<dates/>
</administrative>
<descriptive>
<security/>
<title>
<portionmark/>
<text/>
</title>
<subtitle>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>U.S. Foreign Mission</text>
</subtitle>
<locations>
<country CCODE="GRC"/>
</locations>
<subjects>
<code/>
</subjects>
</descriptive>
</metadata>
<apsummary>
<unknown/>
</apsummary>
<amplification>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>No information available.</text>
</para>
</amplification>
</ap>
<US_EMBASSY>
<ap>
<metadata>
<administrative>
<identifiers/>
<publisher>
<organization agency="MCIA"/>
</publisher>
<dates/>
</administrative>
<descriptive>
<security/>
<title>
<portionmark/>
<text/>
</title>
<subtitle>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>U.S. Embassy</text>
</subtitle>
<locations>
<country CCODE="GRC"/>
</locations>
<subjects>
<code/>
</subjects>
</descriptive>
</metadata>
<apsummary>
<summary>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>The U.S. Ambassador is Thomas M.T. Niles and the Embassy is located
at 91 Vasilissis Sophias Boulevard, 10160 Athens; telephone [30] (1) 721-2951,
8401; fax [30] (1) 645-6282. The mailing address is PSC 108, Athens; APO
AE 09842. The Consulate General is in Thessaloniki at the Plateia Commercial
Center, 43 Tsimiski Street, 7th floor; telephone [30] (31) 242-905.</text>
</para>
<media>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<graphic file="http://198.83.203.22/public/Graphics/Embassy.jpg" exhibit_id="U.S. Embassy" hplace="center" vplace="none"/>
<title>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>U.S. Embassy</text>
</title>
</media>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Chief of Mission: Ambassador Thomas M.T. Niles</text>
</para>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Local Address: 91 Vasilissis Sophias Boulevard, 10160 Athens</text>
</para>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Mailing Address: PSC 108, Athens; APO AE 09842</text>
</para>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Embassy Telephone: [30] (1) 721-2951, 8401</text>
</para>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>FAX: [30] (1) 645-6282</text>
</para>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Consulate: Thessaloniki</text>
</para>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Consulate Address: Plateia Commercial Center, 43 Tsimiski Street,
7th floor </text>
</para>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Consulate Telephone: [30] (31) 242-905</text>
</para>
</summary>
</apsummary>
</ap>
</US_EMBASSY>
<FOREIGN_CONSULATE>
<ap>
<metadata>
<administrative>
<identifiers/>
<publisher>
<organization agency="AFMIC"/>
</publisher>
<dates/>
</administrative>
<descriptive>
<security/>
<title>
<portionmark/>
<text/>
</title>
<subtitle>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Foreign Consulate</text>
</subtitle>
<locations>
<country CCODE="GRC"/>
</locations>
<subjects>
<code/>
</subjects>
</descriptive>
</metadata>
<apsummary>
<unknown/>
</apsummary>
<amplification>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>No information available.</text>
</para>
</amplification>
</ap>
</FOREIGN_CONSULATE>
<FOREIGN_MISSION>
<ap>
<metadata>
<administrative>
<identifiers/>
<publisher>
<organization agency="CIA"/>
</publisher>
<dates/>
</administrative>
<descriptive>
<security/>
<title>
<portionmark/>
<text/>
</title>
<subtitle>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Foreign Mission</text>
</subtitle>
<locations>
<country CCODE="GRC"/>
</locations>
<subjects>
<code/>
</subjects>
</descriptive>
</metadata>
<apsummary>
<summary>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>There is no information available.</text>
</para>
</summary>
</apsummary>
</ap>
</FOREIGN_MISSION>
<US_CONSULATE>
<ap>
<metadata>
<administrative>
<identifiers/>
<publisher>
<organization agency="MCIA"/>
</publisher>
<dates/>
</administrative>
<descriptive>
<security/>
<title>
<portionmark/>
<text/>
</title>
<subtitle>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>U.S. Consulate</text>
</subtitle>
<locations>
<country CCODE="GRC"/>
</locations>
<subjects>
<code/>
</subjects>
</descriptive>
</metadata>
<apsummary>
<summary>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>There is no information available.</text>
</para>
</summary>
</apsummary>
</ap>
</US_CONSULATE>
<TRAVEL_ADVISORIES>
<ap>
<metadata>
<administrative>
<identifiers/>
<publisher>
<organization agency="JICTRANS"/>
</publisher>
<dates/>
</administrative>
<descriptive>
<security/>
<title>
<portionmark/>
<text/>
</title>
<subtitle>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Travel Advisories</text>
</subtitle>
<locations>
<country CCODE="GRC"/>
</locations>
<subjects>
<code/>
</subjects>
</descriptive>
</metadata>
<apsummary>
<summary>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>There is no information available.</text>
</para>
</summary>
</apsummary>
</ap>
</TRAVEL_ADVISORIES>
<ENTRY_REQUIREMENTS>
<ap>
<metadata>
<administrative>
<identifiers/>
<publisher>
<organization agency="MCIA"/>
</publisher>
<dates/>
</administrative>
<descriptive>
<security/>
<title>
<portionmark/>
<text/>
</title>
<subtitle>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Entry Requirements</text>
</subtitle>
<locations>
<country CCODE="GRC"/>
</locations>
<subjects>
<code/>
</subjects>
</descriptive>
</metadata>
<apsummary>
<summary>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>A passport is required for tourist or business stays of up to 3
months. An AIDS test is required for performing artists and students on
Greek scholarships; U.S. test results are not accepted.</text>
</para>
</summary>
</apsummary>
<analysis>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Visas are not necessary but a passport is required for tourist or
business stays of up to 3 months. An AIDS test is required for performing
artists and students on Greek scholarships; U.S. test results are not
accepted. </text>
</para>
</analysis>
</ap>
<VACCINATIONS>
<ap>
<metadata>
<administrative>
<identifiers/>
<publisher>
<organization agency="AFMIC"/>
</publisher>
<dates/>
</administrative>
<descriptive>
<security/>
<title>
<portionmark/>
<text/>
</title>
<subtitle>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Vaccinations</text>
</subtitle>
<locations>
<country CCODE="GRC"/>
</locations>
<subjects>
<code/>
</subjects>
</descriptive>
</metadata>
<apsummary>
<summary>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Immunization against hepatitis A and B and typhoid fever is recommended.
For other entry questions, contact the Greek Embassy in Washington,
D.C., telephone (202) 939-5800; Greek consulates in other U.S. cities;
Greek embassies and consulates around the world; or visit Website http://www.greekembassy.org
. </text>
</para>
</summary>
</apsummary>
<analysis>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Immunization against hepatitis A and B and typhoid fever is recommended.
For other entry questions, travelers should contact the Embassy of Greece
at 2221 Massachusetts Avenue NW, Washington DC 20008, telephone (202)
939-5800; Greek consulates in Atlanta, Boston, Chicago, Houston, Los
Angeles, New Orleans, New York, and San Francisco; or Greek embassies
and consulates around the world. Additional information is available
at website: http://www.greekembassy.org.</text>
</para>
</analysis>
</ap>
</VACCINATIONS>
<CUSTOMS_RESTRICTIONS>
<ap>
<metadata>
<administrative>
<identifiers/>
<publisher>
<organization agency="MCIA"/>
</publisher>
<dates/>
</administrative>
<descriptive>
<security/>
<title>
<portionmark/>
<text/>
</title>
<subtitle>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Customs Restrictions</text>
</subtitle>
<locations>
<country CCODE="GRC"/>
</locations>
<subjects>
<code/>
</subjects>
</descriptive>
</metadata>
<apsummary>
<summary>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>There are duty-free limits on tobacco, alcohol over 44 proof,
wine, perfume, eau de cologne, and gifts; there are no limits on duty-paid
goods, for personal use, from European Union (EU) countries. Plants
with soil, pistols, and rifles may not be brought into the country; shotguns
must be registered upon arrival. Prescription drugs must have a letter
from prescribing doctor and be declared upon entry. Medications containing
codeine are illegal; exporting artifacts or antiquities without permission
is also illegal.</text>
</para>
</summary>
</apsummary>
<analysis>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Duty-free limits are 200 cigarettes, 50 cigars, 100 cigarillos,
or 250 grams of tobacco; 1 liter of alcohol over 44 proof or 2 liters
of wine; 50 grams of perfume and 250 milliliters of eau de cologne, and
gifts of total value less than Dr25,000. There are no limits on duty-paid
goods from European Union (EU) countries, provided they are solely for
personal use. Importing plants with soil is forbidden. Pistols and rifles
may not be brought into the country; shotguns must be registered upon
arrival. Prescription drugs must be accompanied with a letter from the
prescribing doctor and be declared upon entry. Medications containing
codeine are illegal and possessors face fines and imprisonment. Exporting
artifacts or antiquities without the Athens Archaeological Service’s
permission is illegal and vigorously prosecuted. </text>
</para>
</analysis>
</ap>
</CUSTOMS_RESTRICTIONS>
<AVIATION_SAFETY_OVERSIGHT>
<ap>
<metadata>
<administrative>
<identifiers/>
<publisher>
<organization agency="JICTRANS"/>
</publisher>
<dates/>
</administrative>
<descriptive>
<security/>
<title>
<portionmark/>
<text/>
</title>
<subtitle>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>Aviation Safety Oversight</text>
</subtitle>
<locations>
<country CCODE="GRC"/>
</locations>
<subjects>
<code/>
</subjects>
</descriptive>
</metadata>
<apsummary>
<summary>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>The U.S. Federal Aviation Administration has given Greek Airways,
the national air carrier, a safety rating of 2, which is conditionally
unsatisfactory. For further information, contact the U.S. Department
of Transportation at 1-800-322-7873 or visit Website http://www.faa.gov/avr/iasa/index.htm
. For information regarding U.S. DoD policy on specific carriers, contact
DoD at 1–618–256–4801.</text>
</para>
</summary>
</apsummary>
<analysis>
<para>
<portionmark>
<US-SECURITY>
<US-CLASS CLASS="UNCLASSIFIED"/>
</US-SECURITY>
</portionmark>
<text>The U.S. Federal Aviation Administration has given the national
air carrier, Greek Airways, a safety rating of 2, which is conditionally
unsatisfactory. For further information travelers may contact the U.S.
Department of Transportation at 1-800-322-7873, or visit the FAA internet
website at http://www.faa.gov/avr/iasa/index.htm . The U.S. Department
of Defense assesses some carriers for suitability as official provides of
air services. For information regarding Do<?Pub _newline?>D policy on specific
carriers, travelers may contact DoD at 1–618–256–4801.</text>
</para>
</analysis>
</ap>
</AVIATION_SAFETY_OVERSIGHT>
</ENTRY_REQUIREMENTS>
</US_FOREIGN_MISSION>
Maybe you are looking for
-
VTASK problem in RH_UPDATE_DATABASE
Hi Experts, I'm using RH_OBJECT_CREATE to create new position and RH_RELATION_WRITE to create relation of position to Org.Unit and using RH_UPDATE_DATABASE after both...but using VTASK as 'S'. This is not showing any exception but sends a SAP Mail as
-
Éste es un mensaje de varias partes en formato MIME. ------=_NextPart_000_0018_01C8AE0A.39F4CE30 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Bueno, eso... Cuando inserto un flash en mi sitio, la etiqueta
-
Converting from BASE 64 to Decimal Base 10
I have an requirement to convert a value from base 64 to decimal base 10 for ex if i give b the resultant output should be 27 as per the website -- http://convertxy.com/index.php/numberbases/ I tried using the UTL_ENCODE.BASE64_ENCODE with UTL_RAW.CA
-
Transferring Photoshop actions between versions
I just switched from CS3 to CS6. Can I somehow transfer the actionas I wrote or purchased in CS3 to my CS6 version?
-
How to changeFI Doc type For Sales Doc
Hi Friends Sales invoice creates FI document. I want to kow where this document type is maintained. I.E where we enter the document type for FI to be automaticallygenerated as a result of SD documents. Currently RV document type is generated for sal