ARBS: how do I determine firmware version?

I have an AEBS with software version 5.6. How do I identify what firmware it is using? I am curious as to whether it is up to date and also curious as to what the most current firmware version is.

5.6 is the most recent firmware version - it was supplied with the Airport 4.2 update.
The firmware version your Base Station is running is reported by the Airport Admin Utility. From the View menu select Summary.

Similar Messages

How do I determine what version of Firefox I have and where do I go for updates/

Yahoo is 'suggesting' I upgrade to Firefox''' 8'''. How do I determine which version I currently have (there is not 'Internet Options' under Tools) and where to I go to find the updates withough depending on Yahoo?

Hey kkwebb,
There is a KB article called [[Updating Firefox]] that should have all the info you are looking for. You can find out what version of FF you are currently using by going to the Help menu at the top left of Firefox, then choosing "About Firefox." That will not only tell you what version you are using, but it will also let you know if there is an available upgrade.
Hopefully this helps!

How do I determine what version of Apache I'm using?

How do I determine what version of Apache, 1.3 or 2.0, I'm using?

If you're using the stock Apache, it's 1.3 on regular OS X. I think it's Apache 2 on OS X Server, but I'm not certain.
If you're asking because you've installed Apache 2, but want to make sure it's the one that's running and not the stock Apache, one way to tell is to examine the headers it returns. This Terminal command will show your headers (just enter it and hit the "return" key):
<pre class="command">curl -I http://localhost</pre>
Here's what I get:
<pre class="command">HTTP/1.1 200 OK
Date: Mon, 02 Jul 2007 13:09:06 GMT
Server: Apache/1.3.33 (Darwin) PHP/5.2.0 mod_perl/1.29
Content-Type: text/html</pre>
As you can see, I have the stock Apache, but I've installed PHP5.
charlie

How do I determine the version of ADI

Hi,
We have ADI installed on some machines - can anyone advise how I can determine the version of ADI once it is installed?
Thanks

This is a little late, but may be it will help someone else in the future.
There may be an easier way, but this is what works for me.
Log into ADI. Go to the Request Center. Click the ‘tool’ icon.
It looks like a hammer and screwdriver.
On the next screen, look in the bottom left corner.
It will show the version of ADI.
HTH,
Mark

How do I determine which version of Firefox I currently am running?

How do I determine which version of Firefox I am currently running on my laptop? I use Quickbooks Online and I keep getting a message that they will shortly discontinue supporting the version of Firefox that I have.

Help > About Firefox
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.18) Gecko/20110614 Firefox/3.6.18 ( ) = '''3.6.18''' - but that '''( )''' doesn't belong there and Quickbooks Online might be misreading your UserAgent as a result of that ( ) being there.
Try resetting your UserAgent string. 
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter 
''If you see the warning, you can confirm that you want to access that page.'' 
Filter = '''general.useragent.''' 
Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset'''''. 
Then restart Firefox

How do I determine which version of OS I have on my old iphone 3gs--so I can determine if I can set up Icloud?

how do I determine which version of OS I have on my old iphone 3gs--so I can determinw whether I can set up Icloud? thx

Settings > General - About.
If the iPhone is up to date, go to Settings and you will see a setting for iCloud.

How do you determine DSP version in an IOS

How do you determine DSP version in an IOS. I have a bug that says 'Downgrading DSPware to 4.4.12 or earlier resolves the echo issue.'
The bug ID is CSCsd54344.

I have a site with CME with similar static issues, they are running 12.3(8r)T7 with CM 3.2. The DSP version is:
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABORT PACK COUNT
==== === == ======== ======= ===== ======= === == ========= == ===== ============
edsp 001 01 g711ulaw 0.1 IDLE 50/0/1.1
edsp 002 02 g711ulaw 0.1 IDLE 50/0/1.2
edsp 003 01 g711ulaw 0.1 busy 50/0/2.1
edsp 004 02 g711ulaw 0.1 IDLE 50/0/2.2
edsp 005 01 g711ulaw 0.1 IDLE 50/0/3.1
edsp 006 02 g711ulaw 0.1 IDLE 50/0/3.2
edsp 007 01 g711ulaw 0.1 IDLE 50/0/4.1
edsp 008 02 g729r8 p 0.1 IDLE 50/0/4.2
edsp 009 01 g711ulaw 0.1 IDLE 50/0/5.1
edsp 010 02 g729r8 p 0.1 IDLE 50/0/5.2
---------------------------FLEX VOICE CARD 0 ------------------------------
*DSP VOICE CHANNELS*
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT PACK COUNT
===== === == ======== ======= ===== ======= === == ========= == ==== ============
*DSP SIGNALING CHANNELS*
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT PACK COUNT
===== === == ======== ======= ===== ======= === == ========= == ==== ============
C5510 001 01 {flex} 4.4.705 alloc idle 0 0 0/0/0 02 0 47166/0
C5510 001 02 {flex} 4.4.705 alloc idle 0 0 0/0/1 06 0 11363/0
C5510 001 03 {flex} 4.4.705 alloc idle 0 0 0/0/2 10 0 1750/0
C5510 001 04 {flex} 4.4.705 alloc idle 0 0 0/0/3 14 0 557/0
C5510 001 05 {flex} 4.4.705 alloc idle 0 0 0/1/0 02 0 934/0
C5510 001 06 {flex} 4.4.705 alloc idle 0 0 0/1/1 06 0 731/0
C5510 001 07 {flex} 4.4.705 alloc idle 0 0 0/1/2 10 0 4837/0
C5510 001 08 {flex} 4.4.705 alloc idle 0 0 0/1/3 14 0 21514/0
------------------------END OF FLEX VOICE CARD 0 ----------------------------
Hmm, whay does it show 0.1 next to the edsp?
Chris

How to confirm the firmware version of Sharp PN-K321

I tried to update firmware of Sharp PN-K321.
After I tried to update, I left it for long time so did not see it was finished or not.
However the refresh rate is still 30, so it seems that update wasn't done properly.
Is anyone know how to confirm the firmware version ?
Or should I only try to update it again ?
Thank you.

I would contact Sharp.
I lloed at the manula for the monitor and the manual for the updater and could find nothng.
Are you sure the version is not listed somewhere in the on-screen menu?

How to check the firmware version of my DR8?

Hi,
How to check the firmware version of my DR8?

Go to:
http://www.cdspeed2000.com/
to get the software Nero CD-DVD Speed V2.11.

How to determine firmware version of brick?

Is it possible to determine the firmware version that the logic board has installed? I might be wrong about how the firmware operates, but the word 'firmware' to me usually implies flashing the BIOS. I know what version of 'firmware' the OS portion of the HDD has installed, but I'm not sure that it matches the BIOS and I'm still hoping I can revive the unit without repartitioning, etc. Background - I made the boneheaded mistake of trying to run sudo apt-get install -f <whatever> and was left with an SSH session where only bash built-ins would even run. No `ls`, no `cat`, no `sudo`. I tried to revive the system as best I could while the SSH session was still open using the errors reported and using this guide to abuse shell built-ins to recover a system in this state. But I ran out of time and had to close the connection (on a laptop). After this the system would power up but stay at white light LED indefinitely. So I popped the HDD into a spare linux machine and confirmed the drive looks fine - all data there and the OS RAID partitions were easily browsable. So I reimaged the OS RAID partition with rootfs.img from several different firmware versions (I really don't know whch one I was running as I've updated a few times but not sure when last), but still no luck. Am I wrong in assuming there's a BIOS update as well when we talk about 'firmware'? Am I missing some steps after reimaging the OS partition? Any help would be very appreciated.

I ended up soldering leads on the main board and captured the boot log. I managed to find only one other boot log to compare to (here) but comapring the two hasn't given me much insight. On the surface it seems like my issue is that the AHCI SATA loader is trying and failing to get port 0 to respond. I've posted the full boot log here, but I'll post the last bit here in hopes that someone can point me in the right direction. Thanks. Hit any key to stop autoboot: 0
init_sata:
serdes: 24Mhz ref clk
Serdes 1 : CMU OK
Serdes 1 : Lane OK
Serdes 2 : CMU OK
Serdes 2 : Lane OK
cap 0x6f26ff81 port_map 0x3 n_ports 2
P#SERR 0x4050002
IS 0x0
Port 0 control: 0x300
Port 0 status: 0x123
P#SERR 0x0
IS 0x1
Port 1 control: 0x300
Port 1 status: 0x0
GHC 0x80000000
GHC 0x80000002
ahci_init_one: SUCCESS
SATA Controller Info:
AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part
Enter start port: 0
Port 0 status: 123
cmd_slot = 0xb06000
Device not ready. BSY, DRQ or ERR in TFD!
Can not start port 0
timeout exit!
sataenv: GPT header not found
timeout exit!
sataenv: partition 7 not an environment
timeout exit!
sataenv: GPT header not found
timeout exit!
sataenv: partition 8 not an environment
timeout exit!
GPT header not found
Bad Magic Number
arg1 char: s
Barebox-C2K >/

I'm trying to share files from my old MacBook - I'm thinking I don't have the proper version of iTunes. How do I determine the version on my new iPad 2 - 2 weeks old?

I downloaded iFlashdriveHD, but the appropriate skins don't display. App asserts I must have iTunes ver. 9.1 or later. How do I determine what I have on a two week old iPad?
Just trying to do USB transfers from my black MacBook.

App asserts I must have iTunes ver. 9.1 or later.
Where are you seeing this?
The app is not telling you that you need 9.1 on your iPad.
It does not use iTunes on the iPad for anything.
I'm trying to figure the version on my iPad.
It is the version that comes with your specific iOS firmware version.
But again, it is irrelevant to the app.
If you just got the iPad, it (the iPad) requires iTunes 10.4 on your computer.

How do I determine what version of CUPS I have?

I have been using Gimp-Print and am now upgrading to Gutenprint which requires cups 1.1.15 or newer. How do I find out which I have? I am running 10.2.8.
G4 mirrordoor Mac OS X (10.2.x) epson stylus photo 1280

Greg is correct.
Jaguar used version 1.1.15
Panther used version 1.1.20
Tiger uses version 1.1.23
You can determine your version in several ways. The geeky way to find out is to use the Terminal and use the command:
cups-config --version
The easier way is to click on this link. This will display the CUPS web interface from your own computer. The CUPS version will be in the title bar for the web page.
Matt
Mac Mini; B&W G3/300

I've got an older I pad and am wondering how I can determine which version of iTunes I have.

? I've got an older iPad and am wondering how to determine which version of iTunes I have?

The iTunes App on an Ipad is different to the iTunes Application on a Computer.
Krdmgd wrote:
how to determine which version of iTunes I have?
On your Computer... Open iTunes > About > Version.
iTunes free download from www.itunes.com/download

How to Install EU Firmware version on my E52

Hi there. I just got a Nokia E52, with firmware version: 022.009.C00.01, Type RM - 469.
I cant read Vietnamese font, and my friends said i have to install EU versions of firmware. How could i do that?
When i use Ovi suit, it updated automatically, no option of variants right?
thank you

Hi chestervn,
Ask Nokia Care to advise you how to make Vietnamese fonts readable on your phone. When this cannot be achieved within the software package, that is officially linked to your product code, ask to install a different software package on your phone. Nokia Care has the means to do so. What is the product code of your phone? In the end your are the boss of your phone. Cheers

I update my iphone 4g .now not working how to find old firmware version

i update my iphone 4g to newer version ios 7.now not working how to find old firmware version

Downgrading the iOS version is not supported by Apple.
Without know how it is not working:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
BTW you posted in the iPod touch forum

ARBS: how do I determine firmware version?

Similar Messages

Maybe you are looking for